ISTAR – Laboratory of Architecture Main Equipment | • 3D printer • Laser cutter • Miling machine Current Research Projects | •“Design and Performance of Ultra-Thin Concrete Shells” •“CIM Baixa Pombalina” •“Gulbenkian Sensory Tour” •“Arquitracking” Consultancy Activities | • Fabrication of reduced models for testing • Three-dimensional modelling of the built heritage • Development of prototypes Research & Development Activities | • 3D Modeling and Virtual Reality • Digital Fabrication and Rapid Prototyping • Building physics and passive design • Acquisition Data Systems Head | Ana Tomé Helena Rua | Ana Paula Falcão Helena Rua Helena Rua | Ana Paula Falcão Helena Rua
8
Embed
ISTAR Laboratory of Architecture - ULisboa · ISTAR – Laboratory of Architecture Main Equipment | ... ArcGIS v10.1, MATLAB R2014b, MS Excel 2013, MS Project 2013 and SAP2000 v16
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
ISTAR – Laboratory of Architecture
Main Equipment |
• 3D printer
• Laser cutter
• Miling machine
Current Research Projects |
• “Design and Performance of Ultra-Thin Concrete
Shells”
• “CIM Baixa Pombalina”
• “Gulbenkian Sensory Tour”
• “Arquitracking”
Consultancy Activities |
• Fabrication of reduced models for testing
• Three-dimensional modelling of the built heritage
• Development of prototypes
Research & Development Activities |
• 3D Modeling and Virtual Reality
• Digital Fabrication and Rapid Prototyping
• Building physics and passive design
• Acquisition Data Systems
Head | Ana Tomé
He
len
a R
ua
| A
na
Pa
ula
Fa
lcã
o
Helena Rua Helena Rua | Ana Paula Falcão
He
len
a R
ua
LC – Laboratory of Construction
Main Equipment |
• Equipment for mechanical, physical and chemical
testing of mortars, concrete, grouts and composite
materials for construction and rehabilitation
• Equipment to study hydrothermal and acoustic
behaviour for lab and on-site performance tests.
Current Research Projects |
• Energetic efficiency lightweight concrete
• Performance of concrete and mortars formulated with
recycle aggregates
• Recycling and re-use of CDW (construction and
demolition waste)
• Self compacting concrete
• GFRP pultruded profiles in civil engineering
• Nanorenders with aerogel for thermal improvement
Consultancy Activities |
• Compatible mortars for conservation interventions
• Repair mortars for reinforced concrete structures
• Incorporation of new and recycled materials
• Inspection and diagnosis
• In-service performance assessment
Research & Development Activities |
• Lightweight mortars and structural concrete
• Recycle aggregates for mortars and concrete
• Self compacting concrete
• Hydrothermal and acoustic building behaviour
• Mortars and consolidants for conservation
• Advanced composite structural materials
• Incorporation of nanomaterials
Head | Inês Flores-Colen
CEris Civil Engineering Research and Innovation for Sustainability
Environment Laboratory
Main Equipment |
• 9 pilot-scale sub-surface flow CW
• 3 oxygen probes, 1 pH and redox probe and 1
conductivity probe
• 2 YSI multiparametric probes
• Online UV-visible spectrophotometer S::CAN
• 2 muffles (0-1000/1300ºC)
• 2 ovens (0-300ºC)
• Muffle
• Hydraulic pump
• LSS respirometer
• Air compressor
• Spectrophotometer and heating mantle
thermostatically controlled
• Micro balance
Current Research Projects |
• Respirometry in sub-surface flow CW.
• Peak loads in sub-surface flow CW
• Formation, oxidation and release of H2S in sewer
systems
Consultancy Activities |
Research & Development Activity Domains |
• Respirometry
• Constructed Wetlands (CW)
• Sulphide release on drop manholes and
corresponding effects
• Suport to field measurements based on probes
and to analysis for advanced consultancy
Head | Ana Galvão / António H. Cardoso
CEris Civil Engineering Research and Innovation for Sustainability
• SI-Gea - Intelligent Platform for the Advanced
Management of Urban Wastewater Systems
• EVIN - EValuating INfiltration Inflows in the Alcântara
sewer system
• EvLUA – Evaluation of surface and groundwater
quality in Parques de Sintra-Monte LUA
LERM – Laboratory of Structures and Strength of Materials
Main Equipment |
• Wind tunnel
• Shaking table
• Reaction wall
• Dynamic testing system
• Static load frames
Current Research Projects |
• Fire-FRP - Fire protection systems for GFRP pultruded
profiles
• Seismic reinforcement techniques for old buildings
• Recycling & seismic protection: sustainable high
performance CFST columns for seismic areas
• RehabToolBox - Development of rehabilitation
systems and devices
• Pontalumis – Development of a prototype of a
pedestrian bridge
• Clickhouse - Development of a prototype of an
emergency house in composite materials
• Structural glass
• High performance recycled aggregates concrete for the
precast industry (EXCELlentSUStainableCONcrete)
• SEVERES - Seismic Vulnerability of Old Masonry
Buildings
Consultancy Activities |
• Lattice steel towers for electrical lines
• Power rail
Research & Development Activities |
• R&D activities - MSc Thesis (Structures), PhD
Thesis (Civil. Eng.)
• International research projects
• National research projects
• Teaching activities
• Consultancy and special studies
Head | Luis Calado
CEris Civil Engineering Research and Innovation for Sustainability