Assessment Manager: MB Page 1 of 20 Schedule of Accreditation Issued by United Kingdom Accreditation Service 21 - 47 High Street, Feltham, Middlesex, TW13 4UN, UK 0927 Accredited to ISO/IEC 17025:2005 CET Infrastructure Division (A Division of CET Structures Limited) Issue No: 054 Issue date: 13 August 2015 Materials Testing Division Northdown House Ashford Road Harrietsham Kent ME17 1QW Contact: Ian Wright Tel: +44 (0)1622 858545 Fax: +44 (0)1622 858544 E-Mail: [email protected]Website: www.cet-uk.com Testing performed by the Organisation at the locations specified below CET Infrastructure Division (A Division of CET Structures Limited) is accredited for a flexible scope that enables them to establish site laboratories to conduct the activities detailed below, in accordance with their documented in- house procedure: Laboratory Quality Manual Section 25 - These activities are identified by the current location code for operating site laboratories. Note: FLEX (Site) = Sampling or testing actitivites which can be performed at any location, FLEX (NCL) = No current location Current locations covered by the scope of accreditation: Location details Activity Location code Address CET Infrastructure Division Northdown House Ashford Road Harrietsham Kent ME17 1QW Local contact: Mr Ian Wright/ Mr Jon Champion Tel: +44 (0)1622 858545 Fax: +44 (0)1622 858544 EMail: [email protected][email protected]Aggregates Bituminous materials Concrete - fresh Concrete - hardened Soils Harrietsham Address CET Infrastructure Division Highway House 6 Lutterworth Road Wolvey Nr Hinckley Leicestershire LE10 3HW Local contact: Mr Ian Wright / Mr Lorne McLundie Tel: +44 (0) 1455 220784 Fax: +44 (0) 1455 221096 Email: [email protected][email protected]Aggregates Bituminous materials Concrete - fresh Concrete - hardened Soils Wolvey Address CET Infrastructure Division 57 Carron Place Kelvin Industrial Estate East Kilbride Glasgow Scotland G75 0YL Local contact: Mr Ian Wright/ Mr Jim Black Tel: +44 (0)1355 574732 Fax: +44(0)1355 571555 Email: [email protected][email protected]Aggregates Bituminous materials Concrete - fresh Concrete - hardened Soils East Kilbride
20
Embed
Issued by United Kingdom Accreditation Service · Elongation index BS 812-105:Section ... Flakiness index BS EN 933-3:2012 Harrietsham ... type 1 and volume calculation BS EN 12697-1:2012
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Assessment Manager: MB Page 1 of 20
Schedule of Accreditation Issued by
United Kingdom Accreditation Service
21 - 47 High Street, Feltham, Middlesex, TW13 4UN, UK
0927
Accredited to
ISO/IEC 17025:2005
CET Infrastructure Division (A Division of CET Structures Limited)
Testing performed by the Organisation at the locations specified below
CET Infrastructure Division (A Division of CET Structures Limited) is accredited for a flexible scope that enables them to establish site laboratories to conduct the activities detailed below, in accordance with their documented in-house procedure: Laboratory Quality Manual Section 25 - These activities are identified by the current location code for operating site laboratories. Note: FLEX (Site) = Sampling or testing actitivites which can be performed at any location, FLEX (NCL) = No current location Current locations covered by the scope of accreditation:
Location details Activity Location code
Address
CET Infrastructure Division Northdown House Ashford Road Harrietsham Kent ME17 1QW
BS EN 12697-6:2012 Harrietsham Wolvey East Kilbride
Air voids content BS EN 12697-8:2003 Harrietsham
Wolvey East Kilbride
Conventional refusal density
- vibratory compaction BS EN 12697-9:2002 Harrietsham
Wolvey East Kilbride
0927
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK
CET Infrastructure Division (A Division of CET Structures Limited)
Issue No: 054 Issue date: 13 August 2015
Testing performed by the Organisation at the locations specified
Assessment Manager: MB Page 7 of 20
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
BITUMINOUS MIXTURES for roads and other paved areas (cont’d)
Percentage refusal density
(PRD) - vibratory compaction
BS EN 12697-9:2002 Harrietsham Wolvey East Kilbride
Preparation of samples for the
determining binder content, water content and grading
BS EN 12697-28:2001 Harrietsham Wolvey East Kilbride
Determination of the
dimensions of a bituminous sample
BS EN 12697-29:2002 Harrietsham Wolvey East Kilbride
Laboratory compaction of
bituminous mixtures by vibratory compaction
BS EN 12697-32:2003 Harrietsham Wolvey East Kilbride
Hot sand test for the
adhesivity of binder on precoated chippings for HRA
BS EN 12697-37:2003
East Kilbride
Hot sand test BS 598-108:2005 East Kilbride Air voids content Specification for Highway
Works HMSO August 2008 Clause 929
Harrietsham Wolvey East kilbride
Temperature measurement
- in a lorry - laid material - in a heap
BS 12697-13:2000 Site
Compacted density
- nuclear method Documented In-House Method No STP NDM1
Site
CONCRETE – fresh Sampling fresh concrete on
site BS 1881-101:1983 Site
Sampling from initial discharge
(slump test) BS 1881-102:1983 Site
0927
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK
CET Infrastructure Division (A Division of CET Structures Limited)
Issue No: 054 Issue date: 13 August 2015
Testing performed by the Organisation at the locations specified
Assessment Manager: MB Page 8 of 20
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
CONCRETE - fresh (cont’d) Sampling
- composite sample - spot sample
BS EN 12350-1:2009 Site
Slump BS 1881-102:1983 Site Slump BS EN 12350-2:2009 Site Determination of flow BS EN 12350-5:2009 Site Air content - Pressure method BS EN 12350-7:2009 Site Making test cubes and curing BS EN 12390-2:2009 Harrietsham
Wolvey East Kilbride Site
CONCRETE - hardened Cored specimens - taking BS EN 12504-1:2009 Site Compressive strength of
cubes - including curing
BS 1881-116:1983 BS 1881-111:1983
Harrietsham Wolvey East Kilbride
Density BS 1881-114:1983
Harrietsham Wolvey East Kilbride
Compressive strength of cores BS 1881-120:1983 Wolvey
East Kilbride Compressive strength of
cubes - including curing BS EN 12390-3:2009 BS EN 12390-2:2009
Harrietsham Wolvey East Kilbride
Cored Specimens
- examining and testing in compression
BS EN 12504-1:2009 Harrietsham Wolvey East Kilbride
Density BS EN 12390-7:2009 Harrietsham
Wolvey East Kilbride
0927
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK
CET Infrastructure Division (A Division of CET Structures Limited)
Issue No: 054 Issue date: 13 August 2015
Testing performed by the Organisation at the locations specified
Assessment Manager: MB Page 9 of 20
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
CONCRETE – hardened (cont’d)
Flexural strength BS EN 12390-5:2009 Harrietsham Tensile splitting strength BS EN 12390-6:2009 Harrietsham Coring Documented In-House Method
STP C0a:1995 Site
Coring Documented In-House Method
STP C0b:1995 Site
Sampling of concrete by
drilling Documented In-House Method STP C0c:1995
Site
Carbonation BRE Information Paper IP
6/81 Site
Resistivity Documented In-House Method
No ID B04 Issue 2 Site
CONCRETE - reinforced Location of reinforcement BS 1881-204:1988 Site Half-cell potential of uncoated
reinforcing steel in concrete ASTM C 876 - 91 Site
PAVED SURFACES Skid resistance value BS 7976-2:2002 Site
(Harrietsham)
ROAD AND AIRFIELD SURFACE CHARACTERISTICS
Slip/Skid resistance of a
surface - The pendulum test
BS EN 13036-4:2003 Site (Harrietsham)
0927
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK
CET Infrastructure Division (A Division of CET Structures Limited)
Issue No: 054 Issue date: 13 August 2015
Testing performed by the Organisation at the locations specified
Assessment Manager: MB Page 10 of 20
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
ROAD MATERIALS - unbound and hydraulically bound mixtures
Laboratory reference density
and water content - Proctor compaction using alternative apparatus - Proctor test for mixtures compacted with a 2.5 kg rammer in the proctor mould - Modified proctor test for mixtures compacted with a 4.5 kg rammer in the proctor mould
BS EN 13286-2:2010 Harrietsham Wolvey East Kilbride
Laboratory reference density
and water content - vibrating hammer
BS EN 13286-4:2003 Harrietsham Wolvey East Kilbride
Moisture condition value BS EN 13286-46:2003 Harrietsham
Wolvey East Kilbride
ROAD PAVEMENT SURFACES
Texture depth
- by the sand-patch method BS 598-105:2000 Site
Surface regularity using a
rolling straight-edge Specification for Highway Works, HMSO November 2006 Clause 702
Site
Surface macrotexture depth using a volumetric patch technique
BS EN 13036-1:2010 Site
0927
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK
CET Infrastructure Division (A Division of CET Structures Limited)
Issue No: 054 Issue date: 13 August 2015
Testing performed by the Organisation at the locations specified
Assessment Manager: MB Page 11 of 20
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
SOILS for civil engineering purposes
Sampling site excavated
material - from heaps
Documented In-House Method STP S0/Method 2 (a)
Site
Sampling imported granular
material - from stockpiles - from heaps
Documented In-House Method STP S0/Method 4
Site
Moisture content
- oven drying method BS 1377-2:1990 Harrietsham
Wolvey East Kilbride
Saturation moisture content of
chalk BS 1377-2:1990 Harrietsham
Liquid limit
- cone penetrometer (definitive method)
BS 1377-2:1990 Harrietsham Wolvey East Kilbride
Liquid limit
- cone penetrometer - one point
BS 1377-2:1990 Harrietsham Wolvey East Kilbride
Plastic limit BS 1377-2:1990 Harrietsham
Wolvey East Kilbride
Plasticity index and liquidity
index BS 1377-2:1990 Harrietsham
Wolvey Plasticity index BS 1377-2:1990 East Kilbride Particle size distribution
- wet sieving BS 1377-2:1990 Harrietsham
Wolvey East Kilbride
Particle size distribution
- dry sieving BS 1377-2:1990 Harrietsham
Wolvey East Kilbride
Particle size distribution
- sedimentation by hydrometer BS 1377-2:1990 Harrietsham
0927
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK
CET Infrastructure Division (A Division of CET Structures Limited)
Issue No: 054 Issue date: 13 August 2015
Testing performed by the Organisation at the locations specified
Assessment Manager: MB Page 12 of 20
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
SOILS for civil engineering purposes (cont’d)
Particle Density
- gas jar method BS 1377-2:1990 Harrietsham
Wolvey California Bearing Ratio (CBR)
BS 1377-4:1990 Harrietsham
Wolvey East Kilbride
Swelling of soaked CBR
specimen BS 1377-4:1990 Harrietsham
Wolvey East Kilbride
Dry density/moisture content
relationship (2.5 kg rammer) BS 1377-4:1990 Harrietsham
Wolvey East Kilbride
Dry density/moisture content
relationship (4.5 kg rammer) BS 1377-4:1990 Harrietsham
Air voids content BS EN 12697-8:2003 FLEX (NCL) Conventional refusal density
- vibratory compaction BS EN 12697-9:2002 FLEX (NCL)
Percentage refusal density
(PRD) - vibratory compaction
BS EN 12697-9:2002 FLEX (NCL)
Temperature measurement
- in a lorry - laid material - in a heap
BS 12697-13:2000 FLEX (Site)
0927
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK
CET Infrastructure Division (A Division of CET Structures Limited)
Issue No: 054 Issue date: 13 August 2015
Testing performed by the Organisation at the locations specified
Assessment Manager: MB Page 16 of 20
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/ Equipment/Techniques
used
Location
Code
BITUMINOUS MIXTURES for roads and other paved areas (cont’d)
Determination of the
dimensions of a bituminous sample
BS EN 12697-29:2002 FLEX (NCL)
Laboratory compaction of
bituminous mixtures by vibratory compaction
BS EN 12697-32:2003 FLEX (NCL)
Compacted density
- nuclear method Documented In-House Method No STP NDM1
FLEX (Site)
CONCRETE - fresh Sampling
- composite sample - spot sample
BS EN 12350-1:2009 FLEX (Site)
Sampling of fresh concrete BS EN 14488-1:2005 Lower Lea Water absorption BS 1881-122:2011 FLEX (Site) Making test cubes and curing BS EN 12390-2:2009 Lower Lea
Newton Abbott Manufacture and initial curing
of beams/prisms BSEN 12390-2:2009 BS EN 14651:2005
FLEX (Site)
Manufacture and initial curing
of concrete cylinders BS EN 12390-2:2009 FLEX (Site)
Slump BS EN 12350-2:2009 FLEX (Site)
0927
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK
CET Infrastructure Division (A Division of CET Structures Limited)
Issue No: 054 Issue date: 13 August 2015
Testing performed by the Organisation at the locations specified
Assessment Manager: MB Page 17 of 20
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/ Equipment/Techniques
used
Location
Code
CONCRETE - hardened Compressive strength of
cubes - including curing BS 1881-116:1983 BS 1881-111:1983
FLEX (NCL)
Density BS 1881-114:1983 FLEX (NCL) Compressive strength of
cubes - including curing BS EN 12390-3:2009 BS EN 12390-2:2009
Lower Lea Newton Abbott
Density BS EN 12390-7:200 Lower Lea
Newton Abbott Tensile splitting strength BS EN 12390-6:2009 FLEX (Site) Cored Specimens
- examining and testing in compression
BS EN 12504-1:2009 Lower Lea
Fibre content of fibre
reinforced concrete BS EN 14488-7:2006 Lower Lea
ROAD MATERIALS - unbound and hydraulically bound mixtures
Laboratory reference density
and water content - Proctor compaction using alternative apparatus - Proctor test for mixtures compacted with a 2.5 kg rammer in the proctor mould - Modified proctor test for mixtures compacted with a 4.5 kg rammer in the proctor mould
BS EN 13286-2:2010 FLEX (NCL)
Laboratory reference density
and water content - vibrating hammer
BS EN 13286-4:2003 Newton Abbott
Moisture condition value BS EN 13286-46:2003 Newton Abbott
0927
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK
CET Infrastructure Division (A Division of CET Structures Limited)
Issue No: 054 Issue date: 13 August 2015
Testing performed by the Organisation at the locations specified
Assessment Manager: MB Page 18 of 20
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/ Equipment/Techniques
used
Location
Code
SOILS for civil engineering purposes
Sampling site excavated
material - from heaps
Documented In-House Method STP S0/Method 2 (a)
Hemerdon
Sampling imported granular
material - from stockpiles - from heaps
Documented In-House Method STP S0/Method 4
Hemerdon
Moisture content
- oven drying method BS 1377-2:1990 Lower Lea
Newton Abbott Hemerdon
Saturation moisture content of
chalk BS 1377-2:1990 FLEX (NCL)
Liquid limit
- cone penetrometer (definitive method)
BS 1377-2:1990 Newton Abbott Hemerdon
Liquid limit
- cone penetrometer - one point
BS 1377-2:1990 Newton Abbott Hemerdon
Liquid limit
- casagrande apparatus method
BS 1377-2:1990 Lower Lea
Plastic limit BS 1377-2:1990 Newton Abbott
Hemerdon Plasticity index and liquidity
index BS 1377-2:1990 FLEX (NCL)
Plasticity index BS 1377-2:1990 Newton Abbott
Hemerdon Particle size distribution
- wet sieving BS 1377-2:1990 Newton Abbott
Hemerdon Particle size distribution
- dry sieving BS 1377-2:1990 FLEX (NCL)
0927
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK
CET Infrastructure Division (A Division of CET Structures Limited)
Issue No: 054 Issue date: 13 August 2015
Testing performed by the Organisation at the locations specified
Assessment Manager: MB Page 19 of 20
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/ Equipment/Techniques
used
Location
Code
SOILS for civil engineering purposes (cont’d)
Particle size distribution
- sedimentation by hydrometer BS 1377-2:1990 FLEX (NCL)
Particle Density
- gas jar method BS 1377-2:1990 FLEX (NCL)
California Bearing Ratio (CBR) BS 1377-4:1990 Newton Abbott Swelling of soaked CBR
specimen BS 1377-4:1990 Newton Abbott
Dry density/moisture content
relationship (2.5 kg rammer) BS 1377-4:1990 Newton Abbott
Hemerdon Dry density/moisture content
relationship (4.5 kg rammer) BS 1377-4:1990 Newton Abbott
Hemerdon Dry density/moisture content
relationship (vibrating hammer)
BS 1377-4:1990 Newton Abbott
MCV - natural moisture
content BS 1377-4:1990 Newton Abbott
Hemerdon
MCV/moisture content relation BS 1377-4:1990 Newton Abbott Chalk crushing value BS 1377-4:1990 FLEX (NCL) Transportable moisture