Issue 2004/2005 - Магекс-В ЕООД ... Product... · The creativity and competence of our employees, ... fixing and connecting precast concrete components ... Schalfix round

Issue 2004/2005

Seifert about Seifert 2

when too much oil is used on the surface of the shuttering. Further causes are poor cleaning of the concrete surface and improper use of primer when painting. We recommend that individual tests be carried out.

Seifert has a fully equipped and dynamic tooling department, which allows us to produce custom items according to your requirements. Please contact us for further information.

Seifert spacers have been used without complaint in all extreme climatic areas of the world.

The minimum delivery quantity is one packing unit per size. All weights mentioned are per 100 pcs or 100 metres unless otherwise stated.

The terms and conditions of sale, as stated on page 55, are valid at all times.

Copyright © 2004

Gebr. Seifert GmbH & Co. Klagebach 90, 58579 Schalksmühle Germany

Any reproduction in whole or in part,

in any form by any means, electronic or mechanical, or by an information storage and retrieval system without prior written consent from Seifert is strictly prohibited.

The information contained in this brochure is considered accurate. No warranty, however, is expressed or implied regarding it’s accuracy or the results to be obtained from the use thereof. The user shall determine the suitability of a product prior to its use, for the intended application and assume all risk and liability in connection therewith.

Whilst all due care and attention has been made to maintain the correctness of this brochure, due to product developments it may occur that some of the data included is no longer valid. Should you wish to assure yourself, or merely exchange your thoughts with us please contact us.

The company

Gebr. Seifert was established in 1906 as a manufacturing company for industrial and construction products. The firm took part in the rapid development of the construction industry and was the biggest and preferred supplier for most contractors. Seifert has become a manufacturer of innovative and high quality competitive construction products and systems. We are an international company committed to top of the range products and customer service, and have operated according to DIN ISO 9000 standards from the very beginning. Top management has introduced action plans for the firm’s various activities.

Seifert is well equipped to tackle the tremendous growth in the construction sector. Since our first project, we have supplied many billions of rebar spacers to companies all over the world. Developments in the construction industry mean that the company’s structure has changed, and this will also lead to further geographical expansion. People behind the company

At Seifert we are aware that our employees are our most valuable resource. In order to cope with the company’s growing operational and technical needs, we constantly upgrade the essential job skills of our employees. The company’s policy is to create staff training and development activities in all areas to ensure optimal work performance. Our personnel enjoy a safe and motivating working environment. Seifert uses strict safety standards and provides excellent welfare benefits. A convincing company

Our position as market leader is based on manufacturing high quality products at competitive prices. Flexibility, dynamism and reliability are at the heart of our company philosophy. We constantly improve our performance by including our employees in new developments, encouraging their input by means of quality assurance circles and forming independent production groups. Zero fault strategy, preventive fault analysis, statistical process control, traceability of all procedures and activities, and regular self-auditing are the instruments we use to achieve our company goals. Close co-operation and partnership with our suppliers helps them and us to improve our performance, and to offer our customers continued value. The creativity and competence of our employees, customers and suppliers is reflected in our performance and our high quality products. Seifert and the environment

Seifert fully recognises the importance of ensuring full compliance with all the relevant

legislation for the protection of the environment. Whilst such measures are followed to ensure compliance, the company goes further in that it attempts, whenever possible, to minimise waste, to recycle and reuse materials, and to adopt a ”good neighbours” policy towards adjoining properties. Regional coverage

Decades of international experience have helped Seifert to build an impressive sales network in many regions of the world. This network, which can be viewed in the internet at www.seifert.de, has been levered into regional organisations, directly accountable to the customers they serve and completely focussed on delivering superior value. Spacers

When left in the sun or in bright daylight for prolonged periods of time, plastic spacers and bags may become brittle. Please ensure that the goods are stored either under a roof or covered from direct sunlight.

The material used to manufacture spacers is usually PE. This type of plastic is physiologically safe and resistant against all acids and alkaline solutions used in the construction industry.

Spacers are available in all colours other than the standard grey for an additional charge. The minimum charge is €100,-. Please enquire separately to obtain a specific quotation.

The use of plastic spacers in case of fire has been confirmed as harmless by the Institute for Building Technology in Berlin. ”There are no contrary thoughts about the use of plastic spacers in concrete, reinforced concrete and tensioned concrete with regard to fire hazard, as long as the plastic used is not Polyvinylchloride (PVC).” German Concrete Association 1997. In case of fire, a plastic spacer merely melts. The plastic spacers have no effect on the fire resistance.

Spacers

Under certain conditions small ruptures may occur in the manufacture of façades, on the surface of the concrete. These ruptures are in the vicinity of the spacers used, and occur in particular

The programme 3

A strong programme Spacers for top and bottom reinforcement

Spacers for horizontal and vertical reinforcement

Wet cast and fibrous concrete spacers

Lifting, fixing and connecting precast concrete components

Waterstop and sealant

Formwork accessories

Wall spacers

Magnetic products

Chamfers and construction profiles

Accessories for precast concrete elements

Accessories

Page 6 - 10

Page 11 - 20

Page 21 - 23

Page 24 - 31

Page 32 - 33

Page 34 - 35

Page 36 - 40

Page 41

Page 42 - 43

Page 44 - 49

Page 50 - 51

Alphabetical product index Alfafix 44 Anchor nut 35 Aquafix 37 Autofix 19 Backup rod 33 Betofix 23 Bindefix 45 Centerfix 51 Clampfix 14 Clipfix 39 Concrete chamfer 22 Concrete snake 22 Concrete square bar 22 Confix 30 Conterfix 37 Corner guard 49 Counter plate 34 Crimped fixing sockets 26 Cross chairs 9 Crossfix 44 Distafix 48 Double cover spacer 21 Drifix 17 Drip mould 43 Drip washer 50 Duofix 39 Eco shim 47 Econofix 14 Edge guard 49 Edgefix 42 Extrafix 20 Fixing dowels 26 Fixing plate 27 Fixing sockets 26 Form tie rod 34 Formwork clamp 35

Fugenfix 43 Hebefix 24 Hexagon nut 35 H-Fix 11 High cross chairs 9 Hollow wall anchor 38 Hollow wall spacer 40 Horseshoe shim 47 Hydrofix 33 Isofix 33 Jointfix 32 Kennfix 46 Klemmfix 18 L-Fix 11 Liftfix 29 Lifting loops 25 Lifting sockets 24 Loop tie 45 Magnetic block 41 Magnetic chamfer 41 Magnetic plate 41 Magnetic profile 41 Magnetic rod 41 Mattenfix 11 Maxifix 14 Mini corner guard 49 Minifix 17 Multifix 14 Nailing plate 27 Normfix 15 Nutfix 51 Obenfixer 6 Optifix 28 Optifix-HW 28 Packfix strip 45 Packfix-K 45

Palfix 44 Panel pad 49 Panel tie 50 Picofix 18 Planfix screed chair 50 Plate rib washer 34 Plattenfix 51 Polyfix 12 PP-Lifting loops 25 Praktifix 11 Praktifix vertical 11 Praxifix 8 Pressfix 50 Primafix 13 Propfix 28 PVC chamfer 42 Quadrofix 16 Quickfix 44 Railfix 31 Rebar cap 48 Ringfix 12 Rocketfix 40 Rondofix 12 Rotafix-K 44 Safetyfix 50 Sand plates 9 Schalfix round 38 Schalfix-K 38 Semifix 12 Single cover spacer 21 Snap off fixing plug 27 Snapfix 15 Sofix-K 23 Sofix-KF 23 Sofix-Q 23 Sparfix 18

Sperrfix 37 Spring clamp 35 Square shim 47 Starfix 6 Steel chamfer 42 Stoppers 36 Stuelpfix 37 Styrofix 16 Telefix 13 T-Fix 43 Thruty cone 36 Thruty sleeve 36 Tilefix 51 Tilt-up-Fix 29 Tipfix 15 Topfix 6 Topfix-K 6 Transfix 24 Trapezfix 43 Triple cover spacer 21 Tying wire 45 Typofix 46 U-Fix 10 Ultrafix 18 Unifix 15 Vertifix 38 V-Fix 10 Wandfix 37 Water barrier 34 Waved end insert 25 Wedge 45 Wing nut 35 Zettfix 7 Zettfix-H 7

The programme 4

Picture Index Spacers for top and bottom reinforcement 6-7

8-10

Spacers for horizontal and vertical reinforcement 11-13

Wet cast and fibre reinforced concrete spacers 21-23

Lifting, fixing and connecting precast concrete 24-26

14-16

17-19

27-28

29-31

20

The programme 5

Picture Index

Formwork accessories 34-35

Wall spacers 36-37

Magnetic products 41

Accessories 50-51

Waterstop and sealant 32-33

Chamfers and construction profiles 42-43

48-49

Accessories for precast concrete elements 44-45

46-47

38-40

Spacers for top and bottom reinforcement 6

Obenfixer XC individual hystools

Obenfixer XC hystools are manufactured from 6 mm hard drawn wire, to support top reinforcement in concrete slabs. Hystools are freestanding, easy to position, and effectively replace the more costly “goalpost” chairs. Obenfixer XC hystools are intended for use on suspended slabs and have plastic coated feet to eliminate any danger of rust staining on the soffit. Supported area 15 cm x 15 cm. Recommended spacing, depending on the actual circumstances, 1,5 pieces per m². Other sizes are available upon request.

Reference

Height

for slab thickness

Weight (kg/100)

Packing Qty

Obenfixer XC 8 80 mm ~ 100 mm 12,60 100 Obenfixer XC 9 90 mm ~ 110 mm 13,60 100 Obenfixer XC 10 100 mm ~ 120 mm 14,30 100 Obenfixer XC 11 110 mm ~ 130 mm 15,20 100 Obenfixer XC 12 120 mm ~ 140 mm 16,20 100 Obenfixer XC 13 130 mm ~ 150 mm 17,10 100 Obenfixer XC 14 140 mm ~ 160 mm 17,85 100 Obenfixer XC 15 150 mm ~ 170 mm 18,65 100 Obenfixer XC 16 160 mm ~ 180 mm 19,45 100

Starfix and Topfix individual hystools

Steel hystools manufactured from 6 mm hard drawn wire to support top reinforcement in ground floor slabs, mainly used where there is particularly heavy loads or excessive site traffic. Hystools are freestanding and easy to position. Topfix TC hystools have plastic coated feet and Starfix SF and Topfix TF have 14 mm Ø plastic caps fitted to eliminate any danger of rust staining. Supported area with Starfix 41 cm Ø and with Topfix 30 cm Ø. Other sizes are available upon request.

Reference

Weight (kg/100)

Weight (kg/100)

Height

Packing Qty

Topfix TC 6 16,92 60 mm 100 Topfix TC 7 17,81 70 mm 100 Starfix SF 8 28,16 Topfix TC 8 Topfix TF 8 18,70 80 mm 50 Starfix SF 9 29,48 Topfix TC 9 Topfix TF 9 19,60 90 mm 50 Starfix SF 10 30,80 Topfix TC 10 Topfix TF 10 21,20 100 mm 50 Starfix SF 11 32,12 Topfix TC 11 Topfix TF 11 21,60 110 mm 50 Starfix SF 12 33,44 Topfix TC 12 Topfix TF 12 22,00 120 mm 50 Starfix SF 13 34,76 Topfix TC 13 Topfix TF 13 22,90 130 mm 50 Starfix SF 14 36,08 Topfix TC 14 Topfix TF 14 23,80 140 mm 50 Starfix SF 15 37,40 Topfix TC 15 Topfix TF 15 24,70 150 mm 50 Starfix SF 16 38,72 Topfix TC 16 Topfix TF 16 25,55 160 mm 50 Starfix SF 17 40,04 Topfix TC 17 Topfix TF 17 26,45 170 mm 50 Starfix SF 18 41,36 Topfix TC 18 Topfix TF 18 27,30 180 mm 50 Starfix SF 19 42,68 Topfix TC 19 Topfix TF 19 28,20 190 mm 50 Starfix SF 20 44,00 Topfix TC 20 Topfix TF 20 29,40 200 mm 50 Starfix SF 21 45,32 Topfix TC 21 Topfix TF 21 30,30 210 mm 50 Starfix SF 22 46,64 Topfix TC 22 Topfix TF 22 31,18 220 mm 50 Starfix SF 23 49,28 Topfix TC 23 Topfix TF 23 32,08 230 mm 50 Starfix SF 24 50,60 Topfix TC 24 Topfix TF 24 32,96 240 mm 50 Starfix SF 25 51,92 Topfix TC 25 Topfix TF 25 33,86 250 mm 50 Starfix SF 26 52,50 Topfix TC 26 Topfix TF 26 34,76 260 mm 50 Starfix SF 27 54,00 Topfix TC 27 Topfix TF 27 35,66 270 mm 50 Starfix SF 28 55,00 Topfix TC 28 Topfix TF 28 36,56 280 mm 50

Topfix TC

Starfix SF

Topfix TF

Topfix-K

Plastic hystool for the precast manufacture of lightweight wall elements consisting of porous concrete. Freestanding on point-formed rests and easy to position. Not only does the design reduce weight, but also allows good concrete flow. For use with mats, site traffic not permitted. Support area Ø 29 cm. Reference

Concrete cover

Weight (kg/100)

Packing Qty

Topfix-K 06 60 mm 9,60 25 Topfix-K 08 80 mm 10,85 25 Topfix-K 10 100 mm 12,10 25 Topfix-K 12 120 mm 13,37 25 Topfix-K 14 140 mm 14,64 25 Topfix-K 16 160 mm 15,90 25


Calculating the required Zettfix-height: ZH = ST - (CT + RT + RB + CB) where ZH = Zettfix height ST = Slab thickness CT = Concrete cover top reinforcement RT = Top reinforcement bar diameter RB = Bottom reinforcement bar diameter CB = Concrete cover bottom reinforcement

Fig 2 Fig 1

Reference

Height

Top & bottom/ diagonal wires

Weight (kg/100 meters)

Packing Qty

Zettfix 3 30 mm 3,8 / 3,8 mm Ø 22,50 4 000 m Zettfix 4 40 mm 3,8 / 3,8 mm Ø 28,00 2 000 m Zettfix 5 50 mm 3,8 / 3,8 mm Ø 29,00 2 000 m Zettfix 6 60 mm 3,8 / 3,8 mm Ø 30,00 2 000 m Zettfix 7 70 mm 4,0 / 3,8 mm Ø 31,00 2 000 m Zettfix 8 80 mm 4,0 / 3,8 mm Ø 33,30 2 000 m Zettfix 9 90 mm 4,0 / 3,8 mm Ø 35,60 2 000 m Zettfix 10 100 mm 4,0 / 3,8 mm Ø 36,50 2 000 m Zettfix 11 110 mm 4,0 / 3,8 mm Ø 36,60 2 000 m Zettfix 12 120 mm 4,0 / 3,8 mm Ø 38,80 2 000 m Zettfix 13 130 mm 4,0 / 3,8 mm Ø 39,80 2 000 m Zettfix 14 140 mm 4,0 / 4,0 mm Ø 44,50 2 000 m Zettfix 15 150 mm 4,0 / 4,0 mm Ø 48,30 2 000 m Zettfix 16 160 mm 4,0 / 4,0 mm Ø 49,40 2 000 m Zettfix 17 170 mm 4,0 / 4,2 mm Ø 51,00 1 000 m Zettfix 18 180 mm 4,0 / 4,2 mm Ø 51,70 1 000 m Zettfix 19 190 mm 4,0 / 4,2 mm Ø 55,20 1 000 m Zettfix 20 200 mm 4,0 / 4,2 mm Ø 55,80 1 000 m Zettfix 22 220 mm 4,6 / 4,6 mm Ø 63,00 800 m Zettfix 24 240 mm 4,6 / 4,6 mm Ø 66,00 800 m Zettfix 26 260 mm 5,0 / 5,0 mm Ø 83,00 600 m Zettfix 28 280 mm 5,0 / 5,0 mm Ø 86,00 600 m Zettfix 30 300 mm 5,0 / 5,0 mm Ø 90,00 600 m

Zettfix continuous hystools

Zettfix continuous hystools are particularly suitable for twin-sided, reinforced walls and ground floor slabs as their unique design eliminates any danger of puncturing damp proof membranes. Zettfix are mainly used where there is heavy load or excessive site traffic, and also in suspended slabs where they are simply placed on top of the bottom reinforcement to give support and accurate positioning of the top reinforcement. Supported area 2.000 mm x 180 mm. Recommended spacing, depending on the actual circumstances, 0.4 to 0.7 pieces per m². 30 % reduction of spacers possible compared with linear continuous hystools (Fig 2).

Zettfix-H

Economic alternative to Zettfix, made from thinner wire. Single connecting struts prevent unwanted movement of mats. Supported area 2.000 mm x 180 mm. Further sizes up to 300 mm height available upon request.

Reference

Height

Top & bottom/ diagonal wires

Weight (kg/100 meters)

Packing Qty

Zettfix-H 3 30 mm 3,2/3,2 mm 17,00 4 000 m Zettfix-H 4 40 mm 3,2/3,2 mm 17,50 4 000 m Zettfix-H 5 50 mm 3,2/3,2 mm 18,05 4 000 m Zettfix-H 6 60 mm 3,2/3,2 mm 18,55 2 000 m Zettfix-H 7 70 mm 3,5/3,5 mm 22,70 2 000 m Zettfix-H 8 80 mm 3,5/3,5 mm 23,35 2 000 m Zettfix-H 9 90 mm 3,5/3,5 mm 23,95 2 000 m Zettfix-H 10 100 mm 3,5/3,5 mm 24,55 2 000 m Zettfix-H 11 110 mm 3,5/3,5 mm 25,20 2 000 m Zettfix-H 12 120 mm 3,8/3,5 mm 29,10 2 000 m Zettfix-H 13 130 mm 3,8/3,5 mm 29,75 2 000 m Zettfix-H 14 140 mm 3,8/3,8 mm 32,10 2 000 m Zettfix-H 15 150 mm 3,8/3,8 mm 32,80 2 000 m Zettfix-H 16 160 mm 4,0/4,0 mm 37,30 2 000 m Zettfix-H 17 170 mm 4,0/4,0 mm 38,15 2 000 m Zettfix-H 18 180 mm 4,0/4,2 mm 40,50 2 000 m Zettfix-H 19 190 mm 4,0/4,2 mm 41,40 2 000 m Zettfix-H 20 200 mm 3,8/3,5 mm 44,60 800 m

N E W


Praxifix chair spacers

Extensively used plastic spacer for precast and on site concrete applications. Praxifix spacers are robust and designed for vertical and horizontal reinforcement. Good stability and excellent concrete flow characteristics. Large clamping area for bar diameters from 6 mm to 20 mm.

Reference

Concrete cover

For steel diameter

Bar size

Weight (kg/100)

Packing Qty

Praxifix 15/6-20 15 mm 5/8" 6 - 20 mm #2 - #6 0,76 1 000 Praxifix 20/6-20 20 mm 3/4" 6 - 20 mm #2 - #6 0,89 1 000 Praxifix 25/6-20 25 mm 1" 6 - 20 mm #2 - #6 1,02 1 000 Praxifix 30/6-20 30 mm 1 1/4" 6 - 20 mm #2 - #6 1,15 1 000 Praxifix 35/6-20 35 mm 1 3/8" 6 - 20 mm #2 - #6 1,30 1 000 Praxifix 40/6-20 40 mm 1 1/2" 6 - 20 mm #2 - #6 1,45 1 000 Praxifix 50/6-20 50 mm 2" 6 - 20 mm #2 - #6 1,60 500 Praxifix 60/6-20 60 mm 2 1/2" 6 - 20 mm #2 - #6 1,75 500

Praxifix - S chair spacers

As Praxifix above but with pointed legs to ensure minimum visibility on the concrete surface. Reference

Concrete cover

For steel diameter

Bar size

Weight (kg/100)

Packing Qty

Praxifix 20/6-20 S 20 mm 3/4" 6 - 20 mm #2 - #6 0,89 1 000 Praxifix 25/6-20 S 25 mm 1" 6 - 20 mm #2 - #6 1,02 1 000 Praxifix 30/6-20 S 30 mm 1 1/4" 6 - 20 mm #2 - #6 1,15 1 000 Praxifix 35/6-20 S 35 mm 1 3/8" 6 - 20 mm #2 - #6 1,30 1 000 Praxifix 40/6-20 S 40 mm 1 1/2" 6 - 20 mm #2 - #6 1,45 1 000 Praxifix 50/6-20 S 50 mm 2" 6 - 20 mm #2 - #6 1,60 500 Praxifix 60/6-20 S 60 mm 2 1/2" 6 - 20 mm #2 - #6 1,75 500

Praxifix plastic high chairs

The better alternative to wire chairs. Extensively used plastic spacer for suspended and ground floor slabs as well as for light duty top reinforcement. It has good stability and excellent concrete flow characteristics. Pointed legs ensure minimum visibility on the concrete surface.

Reference

Concrete cover

For steel diameter

Bar size

Weight (kg/100)

Packing Qty

Praxifix 60/6-28 60 mm 2 1/2" 6 - 28 mm #2 - #9 3,52 500 Praxifix 70/6-28 70 mm 2 3/4" 6 - 28 mm #2 - #9 3,84 500 Praxifix 75/6-28 75 mm 3" 6 - 28 mm #2 - #9 4,00 500 Praxifix 80/6-28 80 mm 3 1/4" 6 - 28 mm #2 - #9 4,20 500 Praxifix 90/6-28 90 mm 3 1/2" 6 - 28 mm #2 - #9 4,50 500 Praxifix 100/6-28 100 mm 4" 6 - 28 mm #2 - #9 4,80 500

Praxifix K individual plastic hystools

Individual high chairs for top reinforcement. Freestanding, easy to position and stackable to reach any desired height. They can effectively replace the more costly steel hystools. Praxifix K is manufactured from polyethylene, thus eliminating any danger of corrosion.

Reference

Concrete cover

For steel diameter

Bar size

Weight (kg/100)

Packing Qty

Praxifix K 50/6-32 50 mm 2" 6 - 32 mm #2 - #9 8,90 200 Praxifix K 65/6-32 65 mm 2 1/2" 6 - 32 mm #2 - #9 9,20 200 Praxifix K 75/6-32 75 mm 3" 6 - 32 mm #2 - #9 9,50 200 Praxifix K 80/6-32 80 mm 3 1/4" 6 - 32 mm #2 - #9 9,70 200 Praxifix K 90/6-32 90 mm 3 1/2" 6 - 32 mm #2 - #9 9,90 200 Praxifix K 100/6-32 100 mm 4" 6 - 32 mm #2 - #9 10,30 200 Praxifix K 115/6-32 115 mm 4 1/2" 6 - 32 mm #2 - #9 10,80 150 Praxifix K 125/6-32 125 mm 5" 6 - 32 mm #2 - #9 11,30 150 Praxifix K 140/6-32 140 mm 5 1/2" 6 - 32 mm #2 - #9 11,80 150 Praxifix K 150/6-32 150 mm 6" 6 - 32 mm #2 - #9 12,10 150

Praxifix - Mini

Cost effective alternative for light duty applications. Pointed legs ensure minimum visibility on the concrete surface. Reference

Concrete cover

For steel diameter

Bar size

Weight (kg/100)

Packing Qty

Praxifix 15/5-12 S 15 mm 5/8" 5 - 12 mm #2 - #4 0,40 1 000 Praxifix 20/5-12 S 20 mm 3/4" 5 - 12 mm #2 - #4 0,44 1 000 Praxifix 25/5-12 S 25 mm 1" 5 - 12 mm #2 - #4 0,48 1 000 Praxifix 30/5-12 S 30 mm 1 1/4" 5 - 12 mm #2 - #4 0,52 1 000 Praxifix 40/5-12 S 40 mm 1 1/2" 5 - 12 mm #2 - #4 0,60 1 000


Sand plates

The range of Praxifix and Cross chair spacers have matching circular base plates available, to allow greater strength and stability, and are therefore ideal for use on soft sand blindings and insulating material. Praxifix Disk fits Praxifix spacers for rebar sizes 6 - 20 mm (#2 - #6). Reference

Diameter

Weight (kg/100)

Packing Qty

Praxifix Disk 50 mm (2") 1,0 500 Cross chair sand plate 75 mm (3") 1,0 500 High cross chair sand plate 130 mm (5 1/2") 1,3 100

Cross chairs

From Seifert’s comprehensive range of rebar spacers. Plastic bar support at low cost. Provides solid support for horizontal and top reinforcement in concrete slabs. Strong, no bleed, rust proof and easy to use. Good concrete flow. Tapered legs to ensure minimal form contact.

Reference

Concrete cover

Weight (kg/100)

Packing Qty

Cross chair 3/4" 20 mm 3/4" 0,96 200 Cross chair 1" 25 mm 1" 1,28 200 Cross chair 1 1/4" 30 mm 1 1/4" 1,60 200 Cross chair 1 1/2" 40 mm 1 1/2" 2,24 200 Cross chair 1 3/4" 45 mm 1 3/4" 2,56 200 Cross chair 2" 50 mm 2" 2,88 200 Cross chair 2 1/4" 55 mm 2 1/4" 3,52 200

High cross chairs Reference

Concrete cover

Weight (kg/100)

Packing Qty

High cross chair 2 1/2" 65 mm 2 1/2" 5,80 200 High cross chair 2 3/4" 70 mm 2 3/4" 6,00 200 High cross chair 3" 75 mm 3" 6,20 200 High cross chair 3 1/4" 85 mm 3 1/4" 6,40 200 High cross chair 3 1/2" 90 mm 3 1/2" 6,60 200 High cross chair 3 3/4" 95 mm 3 3/4" 6,80 200 High cross chair 4" 100 mm 4" 7,00 200 High cross chair 4 1/4" 110 mm 4 1/4" 7,20 200 High cross chair 4 1/2" 115 mm 4 1/2" 7,40 200 High cross chair 4 3/4" 120 mm 4 3/4" 7,60 200 High cross chair 5" 125 mm 5" 7,80 200 High cross chair 5 1/4" 135 mm 5 1/4" 8,00 200 High cross chair 5 1/2" 140 mm 5 1/2" 8,20 200 High cross chair 5 3/4" 145 mm 5 3/4" 8,40 200 High cross chair 6" 155 mm 6" 8,60 200 High cross chair 6 1/2" 165 mm 6 1/2" 9,00 200 High cross chair 7" 180 mm 7" 9,40 200

Fraction Decimal Metric Bar size 1/4" 0.25 6.2 mm #2 1/2" 0.50 12.5 mm #4 3/4" 0.75 19.0 mm #6 1" 1.00 25.4 mm #8

Fraction Decimal Metric Bar size 1/8" 0.125 3.1 mm #1 3/8" 0.375 9.4 mm #3 5/8" 0.625 15.5 mm #5 7/8" 0.875 22.0 mm #7

metre inch foot yard metre 1 39.37 3.2808 1.0936 inch 0.0254 1 0.0833 0.0277 foot 0.3048 12 1 0.3333 yard 0.9140 36 3 1

Conversion

Conversion from metric (SI) to imperial measures. To find the size of a particular wheel spacer, multiply the first number by 0.04 (eg. Minifix 40/4-18, multiply 40 by 0.04 = 1.6 or approx. 11/2 inches). To find out what size bar the wheel will hold, match the number to the closest “mm” equiva-lent, (eg. Minifix 40/4-18. 4 mm is between #1 and #2 bar [mesh] and 18 mm is closest to #6 bar. Anything below 1/4 inch is mesh.


U-Fix “E” continuous spacers

Similar to U-Fix but with slighter profile width, which offers obvious cost advantage. Custom lengths available on request. Reference

Concrete cover

Profile width

Standard length

Weight (kg/100 m)

Packing Qty

U-Fix 15 E 15 mm 5/8" 22 mm 2 450 mm 8,40 7 000 m U-Fix 20 E 20 mm 3/4" 22 mm 2 450 mm 11,20 5 600 m U-Fix 25 E 25 mm 1" 25 mm 2 000 mm 11,55 4 000 m U-Fix 30 E 30 mm 1 1/4" 30 mm 2 000 mm 16,30 3 500 m

U-Fix “E Iso” continuous spacers for use on soft bases

Similar to U-Fix “Iso” but with slighter profile width, which offers obvious cost advantage. Suitable for laying on soft bases and insulating material. Custom lengths available on request.

Reference

Concrete cover

Profile width

Standard length

Weight (kg/100 m)

Packing Qty

U-Fix 25 E Iso 25 mm 1" 25 mm 2 000 mm 18,35 4 000 m U-Fix 30 E Iso 30 mm 1 1/4" 30 mm 2 000 mm 19,40 3 500 m

U-Fix continuous spacers

U-Fix is a continuous plastic spacer in length of 200 cm (80 “) for supporting bottom reinforcement in suspended slabs. It has good stability and excellent concrete flow characteristics. Particularly suitable for use on metal decking. Custom lengths available on request.

Reference

Concrete cover

Profile width

Weight (kg/100 m)

Packing Qty

U-Fix 15 15 mm 5/8" 30 mm 10,35 7 000 m U-Fix 20 20 mm 3/4" 30 mm 13,10 5 600 m U-Fix 25 25 mm 1" 30 mm 16,75 4 000 m U-Fix 25 ST 25 mm 1" 34 mm 19,60 4 000 m U-Fix 30 30 mm 1 1/4" 34 mm 19,50 3 500 m U-Fix 30 ST 30 mm 1 1/4" 37 mm 23,25 3 500 m U-Fix 35 35 mm 1 3/8" 37 mm 25,50 2 880 m U-Fix 40 40 mm 1 1/2" 43 mm 35,50 2 400 m U-Fix 50 50 mm 2" 50 mm 41,95 1 680 m

U-Fix “Iso” continuous spacers for use on soft bases

Same as above but without cut-outs. Suitable for laying on soft bases and insulating material. Custom lengths available on request. Reference

Concrete cover

Profile width

Weight (kg/100 m)

Packing Qty

U-Fix 15 Iso 15 mm 5/8" 30 mm 12,60 7 000 m U-Fix 20 Iso 20 mm 3/4" 30 mm 15,05 5 600 m U-Fix 25 Iso 25 mm 1" 30 mm 21,00 4 000 m U-Fix 25 ST Iso 25 mm 1" 34 mm 23,90 4 000 m U-Fix 30 Iso 30 mm 1 1/4" 34 mm 23,65 3 500 m U-Fix 30 ST Iso 30 mm 1 1/4" 37 mm 26,90 3 500 m U-Fix 35 Iso 35 mm 1 3/8" 37 mm 31,70 2 880 m U-Fix 40 Iso 40 mm 1 1/2" 43 mm 44,95 2 400 m U-Fix 50 Iso 50 mm 2" 50 mm 50,75 1 680 m

Please note that with respect to the requirements for sight concrete, both U-Fix and V-Fix are only suitable for ceiling slabs under particular circumstances. Incorrect use during precasting can cause small fissures in thin precast elements, They should therefore only be used by precasters after complete testing has been carried out. The application of U-Fix E on building sites and for the manufacture of facades must be individually tested before use.

V-Fix

V-Fix is a continuous plastic spacer in lengths of 200 cm (80") for supporting bottom reinforcement in suspended slabs, with excellent concrete flow characteristics. Available in custom lengths on request.

Reference

Concrete cover

Weight (kg/100 m)

Packing Qty

V-Fix 25 25 mm 1" 14,00 5 600 m V-Fix 30 30 mm 1 1/4" 15,00 4 900 m

N E W

Spacers for horizontal and vertical reinforcement 11

Mattenfix spacer supporting large areas

Spacer designed for supporting large areas in heavy duty applications. For vertical and horizontal reinforcement. Can be fastened to vertical reinforcement with two clamp hooks. For use in reinforced walls. Overall size: 260 x 200 mm.

Reference

Concrete cover

Weight (kg/100)

Packing Qty

Mattenfix 15 15 mm 5/8" 4,30 100 Mattenfix 20 20 mm 3/4" 4,70 100 Mattenfix 25 25 mm 1" 4,90 100 Mattenfix 30 30 mm 1 1/4" 5,57 100 Mattenfix 40 40 mm 1 1/2" 6,50 100

H-Fix plastic spacer supporting large areas

Spacer, made from plastic. Suitable for supporting large areas in heavy duty slab applications. Overall size: 210 x 100 mm. Pointed feet for minimal contact to formwork.

Reference

Concrete cover

Weight (kg/100)

Packing Qty

H-Fix 15 15 mm 5/8" 2,60 200 H-Fix 20 20 mm 3/4" 2,90 200 H-Fix 25 25 mm 1" 3,20 200 H-Fix 30 30 mm 1 1/4" 3,40 200 H-Fix 35 35 mm 1 3/8" 4,10 200 H-Fix 40 40 mm 1 1/2" 4,80 100 H-Fix 45 45 mm 1 3/4" 5,20 100 H-Fix 50 50 mm 2" 5,60 100

L-Fix

Clamping spacer for use with several reinforcement bars. Suitable for vertical and horizontal reinforcement. Overall size 350 x 50 mm. Reference

Concrete cover

Weight (kg/100)

Packing Qty

L-Fix 15 15 mm 5/8" 3,08 250 L-Fix 20 20 mm 3/4" 3,20 250 L-Fix 25 25 mm 1" 3,36 250 L-Fix 30 30 mm 1 1/4" 4,00 250 L-Fix 35 35 mm 1 3/8" 4,28 150 L-Fix 40 40 mm 1 1/2" 4,40 150 L-Fix 50 50 mm 2" 4,60 150

Praktifix

Low cost spacer for supporting large areas in heavy duty applications. Overall size: 210 x 60 mm. Reference

Concrete cover

Weight (kg/100)

Packing Qty

Praktifix 15 15 mm 5/8" 2,00 250 Praktifix 20 20 mm 3/4" 2,25 250 Praktifix 25 25 mm 1" 2,53 250 Praktifix 30 30 mm 1 1/4" 2,62 250 Praktifix 35 35 mm 1 3/8" 3,06 200 Praktifix 40 40 mm 1 1/2" 3,29 200 Praktifix 50 50 mm 2" 3,75 150

Praktifix Vertical

As Praktifix but with two pairs of hooks for attachment to vertical reinforcement. Reference

Concrete cover

Weight (kg/100)

Packing Qty

Praktifix Vertical 15 15 mm 5/8" 2,05 250 Praktifix Vertical 20 20 mm 3/4" 2,30 250 Praktifix Vertical 25 25 mm 1" 2,58 250 Praktifix Vertical 30 30 mm 1 1/4" 2,67 250 Praktifix Vertical 35 35 mm 1 3/8" 3,11 200 Praktifix Vertical 40 40 mm 1 1/2" 3,34 200 Praktifix Vertical 50 50 mm 2" 3,80 150


Semifix heavy duty plastic slab bolster

The better alternative to steel slab bolsters, provides sturdy support for heaviest loads. As with all Seifert spacers the plastic used does not react to concrete mixes or steel reinforcement, and therefore does not promote corrosion, thus giving lasting strength and durability. Unique joints connect, to achieve the desired length on site. Conveniently boxed for easy shipping and storage.

Reference

Concrete cover

Width

Length

Weight (kg/100)

Packing Qty

Semifix 20 20 mm 3/4" 55 mm 250 mm 4,30 200 Semifix 25 25 mm 1" 55 mm 250 mm 4,40 200 Semifix 30 30 mm 1 1/4" 55 mm 250 mm 4,60 200 Semifix 35 35 mm 1 3/8" 55 mm 250 mm 5,30 200 Semifix 40 40 mm 1 1/2" 55 mm 250 mm 5,70 200 Semifix 50 50 mm 2" 55 mm 250 mm 6,00 200 Semifix-Super 25 25 mm 1" 75 mm 350 mm 8,00 100 Semifix-Super 30 30 mm 1 1/4" 75 mm 350 mm 9,60 100 Semifix-Super 35 35 mm 1 3/8" 75 mm 350 mm 11,00 100 Semifix-Super 40 40 mm 1 1/2" 75 mm 350 mm 11,20 100 Semifix-Super 50 50 mm 2" 75 mm 350 mm 11,70 100 Semifix-Super 60 60 mm 2 1/2" 75 mm 350 mm 12,20 100 Semifix-Super 75 75 mm 3" 75 mm 350 mm 15,00 100

Rondofix

Sturdy plastic spacer, to support large areas of bottom reinforcement. Consisting of four single rings. Ring diameters from 200 to 310 mm. Reference

Concrete cover

Weight (kg/100)

Packing Qty

Rondofix 15 15 mm 5/8" 3,15 250 Rondofix 20 20 mm 3/4" 3,50 200 Rondofix 25 25 mm 1" 3,85 150 Rondofix 30 30 mm 1 1/4" 4,15 100 Rondofix 35 35 mm 1 3/8" 4,50 100 Rondofix 40 40 mm 1 1/2" 5,00 100 Rondofix 50 50 mm 2" 5,50 100

Ringfix

Stable plastic spacer for supporting large areas. Just throw onto the formwork and lay the mats. With clamp hooks for vertical reinforcement. Diameter 230 to 380 mm. Reference

Concrete cover

Weight (kg/100)

Packing Qty

Ringfix 15 15 mm 5/8" 4,20 200 Ringfix 20 20 mm 3/4" 4,35 200 Ringfix 25 25 mm 1" 4,45 200 Ringfix 30 30 mm 1 1/4" 4,65 100

Polyfix

More cost effective plastic spacer for supporting large areas. Just throw onto formwork, lay mats, finished. With clamp hooks for vertical reinforcement. Diameter 220 to 380 mm. Reference

Concrete cover

Weight (kg/100)

Packing Qty

Polyfix 15 15 mm 5/8" 2,95 500 Polyfix 20 20 mm 3/4" 3,05 200 Polyfix 25 25 mm 1" 3,35 200 Polyfix 30 30 mm 1 1/4" 3,50 200


Primafix medium duty plastic slab bolster

Spacer with good concrete flow, supporting large areas. Tapered legs for minimised form contact. Moulded uprights avoid moving of rebars. Up to 30 mm cover suitable for heavier loads. Dimensions: 34 mm x 500 mm. Unique joints connect, to achieve any length desired on site.

0) with flat feet due to technical reasons

1) 20 bundles of 50 pieces each on pallets 2) 25 bundles of 50 pieces each on pallets

3) 30 bundles of 50 pieces each on pallets 4) conveniently boxed

Reference

Concrete cover

Length

Weight (kg/100 pcs)

Packing Qty

Primafix 15/500 0) 4) 15 mm 5/8" 500 mm 5,20 200 = 100 m Primafix 20/500 4) 20 mm 3/4" 500 mm 5,40 200 = 100 m Primafix 25/500 4) 25 mm 1" 500 mm 5,60 200 = 100 m Primafix 30/500 4) 30 mm 1 1/4" 500 mm 5,80 200 = 100 m Primafix 35/500 4) 35 mm 1 3/8" 500 mm 6,00 200 = 100 m Primafix 40/500 4) 40 mm 1 1/2" 500 mm 6,20 150 = 75 m Primafix 50/500 4) 50 mm 2" 500 mm 6,40 150 = 75 m Primafix 15/1000 0) 3) 15 mm 5/8" 1 000 mm 10,40 1 500 = 1 500 m Primafix 20/1000 2) 20 mm 3/4" 1 000 mm 10,80 1 250 = 1 250 m Primafix 25/1000 2) 25 mm 1" 1 000 mm 11,20 1 250 = 1 250 m Primafix 30/1000 2) 30 mm 1 1/4" 1 000 mm 11,60 1 250 = 1 250 m Primafix 35/1000 1) 35 mm 1 3/8" 1 000 mm 12,00 1 000 = 1 000 m Primafix 40/1000 1) 40 mm 1 1/2" 1 000 mm 12,40 1 000 = 1 000 m Primafix 50/1000 1) 50 mm 2" 1 000 mm 12,80 1 000 = 1 000 m Primafix 15/2000 0) 3) 15 mm 5/8" 2 000 mm 20,80 1 500 = 3 000 m Primafix 20/2000 2) 20 mm 3/4" 2 000 mm 21,60 1 250 = 2 500 m Primafix 25/2000 2) 25 mm 1" 2 000 mm 22,40 1 250 = 2 500 m Primafix 30/2000 2) 30 mm 1 1/4" 2 000 mm 23,20 1 250 = 2 500 m Primafix 35/2000 1) 35 mm 1 3/8" 2 000 mm 24,00 1 000 = 2 000 m Primafix 40/2000 1) 40 mm 1 1/2" 2 000 mm 24,80 1 000 = 2 000 m Primafix 50/2000 1) 50 mm 2" 2 000 mm 25,60 1 000 = 2 000 m Primafix 15/2500 0) 3) 15 mm 5/8" 2 500 mm 26,00 1 500 = 3 750 m Primafix 20/2500 2) 20 mm 3/4" 2 500 mm 27,00 1 250 = 3 125 m Primafix 25/2500 2) 25 mm 1" 2 500 mm 28,00 1 250 = 3 125 m Primafix 30/2500 2) 30 mm 1 1/4" 2 500 mm 29,00 1 250 = 3 125 m Primafix 35/2500 1) 35 mm 1 3/8" 2 500 mm 30,00 1 000 = 2 500 m Primafix 40/2500 1) 40 mm 1 1/2" 2 500 mm 31,00 1 000 = 2 500 m Primafix 50/2500 1) 50 mm 2" 2 500 mm 32,00 1 000 = 2 500 m

Telefix light duty plastic slab bolster

Sturdy rod spacer with cross sections and devices to allow stacking. Sizes 1 000 mm and 2 450 mm are assembled single spacers. Uprights on top section of the spacer are available on request.

Reference

Concrete cover

Length

Weight (kg/100 pcs)

Packing Qty

Telefix 15/500 15 mm 5/8 " 500 mm 2,83 200 Telefix 20/500 20 mm 3/4 " 500 mm 3,16 200 Telefix 25/500 25 mm 1 " 500 mm 3,29 200 Telefix 30/500 30 mm 1 1/4 " 500 mm 3,90 200 Telefix 35/500 35 mm 1 3/8 " 500 mm 4,00 200 Telefix 40/500 40 mm 1 1/2 " 500 mm 4,20 200 Telefix 50/500 50 mm 2 " 500 mm 4,85 200 Telefix 15/1000 15 mm 5/8 " 1 000 mm 5,66 2 000 Telefix 20/1000 20 mm 3/4 " 1 000 mm 6,32 2 000 Telefix 25/1000 25 mm 1 " 1 000 mm 6,58 2 000 Telefix 30/1000 30 mm 1 1/4 " 1 000 mm 7,80 2 000 Telefix 35/1000 35 mm 1 3/8 " 1 000 mm 8,00 2 000 Telefix 40/1000 40 mm 1 1/2 " 1 000 mm 8,40 2 000 Telefix 50/1000 50 mm 2 " 1 000 mm 9,70 2 000 Telefix 15/2450 15 mm 5/8 " 2 450 mm 14,15 2 000 Telefix 20/2450 20 mm 3/4 " 2 450 mm 15,80 2 000 Telefix 25/2450 25 mm 1 " 2 450 mm 16,45 2 000 Telefix 30/2450 30 mm 1 1/4 " 2 450 mm 19,50 2 000 Telefix 35/2450 35 mm 1 3/8 " 2 450 mm 20,00 2 000 Telefix 40/2450 40 mm 1 1/2 " 2 450 mm 21,00 2 000 Telefix 50/2450 50 mm 2 " 2 450 mm 24,25 2 000


Econofix mesh clips

Econofix plastic clamp type spacer for use in low load situations, principally precast concrete manufacture. Reference

Concrete cover

For steel diameter

Bar size

Weight (kg/100)

Packing Qty

Econofix 20/5 20 mm 3/4" 5 mm Mesh 0,11 1 000 Econofix 25/5 25 mm 1" 5 mm Mesh 0,17 1 000 Econofix 25/12-16 25 mm 1" 12 - 16 mm #4 - #5 0,40 500 Econofix 40/5 40 mm 1 1/2" 5 mm Mesh 0,24 1 000 Econofix 40/12-16 40 mm 1 1/2" 12 - 16 mm #4 - #5 0,66 500 Econofix 50/5 50 mm 2" 5 mm Mesh 0,33 1 000 Econofix 50/12-16 50 mm 2" 12 - 16 mm #4 - #5 0,85 500

Clampfix plastic rebar clips

Clampfix is a sturdy general purpose clip-on spacer used in all types of applications, found in precast yards and on site. It can be fixed horizontally or vertically on bars.

Reference

Concrete cover

For steel diameter

Bar size

Weight (kg/100)

Packing Qty

Clampfix 15/ 4-12 15 mm 5/8" 4 - 12 mm #1 - #4 0,27 1 000 Clampfix 20/ 4-16 20 mm 3/4" 4 - 16 mm #1 - #5 0,47 1 000 Clampfix 25/ 4-18 25 mm 1" 4 - 18 mm #1 - #6 0,50 1 000 Clampfix 30/ 4-18 30 mm 1 1/4" 4 - 18 mm #1 - #6 0,74 1 000 Clampfix 40/ 4-18 40 mm 1 1/2" 4 - 18 mm #1 - #6 0,80 1 000 Clampfix 50/ 4-18 50 mm 2" 4 - 18 mm #1 - #6 1,20 1 000 Clampfix 60/ 4-18 60 mm 2 1/2" 4 - 18 mm #1 - #6 1,20 500 Clampfix 65/ 4-18 65 mm 2 3/8" 4 - 18 mm #1 - #6 1,41 500 Clampfix 75/ 6-20 75 mm 3" 6 - 20 mm #2 - #6 2,00 500

Maxifix plastic rebar clips

Maxifix is a sturdy clip-on spacer for medium to heavy duty usage in all types of applications found in precast yards and on site. Capable of clamping reinforcement up to 25 mm diameter, Maxifix offers a large advantage over lighter duty spacers whilst being more cost effective than many intended for heavy duty applications only. It can be fixed horizontally or vertically on bars.

Reference

Concrete cover

For steel diameter

Bar size

Weight (kg/100)

Packing Qty

Maxifix 15/ 8-25 15 mm 5/8" 8 - 25 mm #3 - #8 1,75 1 000 Maxifix 20/ 8-25 20 mm 3/4" 8 - 25 mm #3 - #8 1,80 1 000 Maxifix 25/ 8-25 25 mm 1" 8 - 25 mm #3 - #8 1,90 1 000 Maxifix 30/ 8-25 30 mm 1 1/4" 8 - 25 mm #3 - #8 2,15 500 Maxifix 35/ 8-25 35 mm 1 3/8" 8 - 25 mm #3 - #8 2,20 500 Maxifix 40/ 8-25 40 mm 1 1/2" 8 - 25 mm #3 - #8 2,25 500 Maxifix 50/ 8-25 50 mm 2" 8 - 25 mm #3 - #8 2,65 500 Maxifix 75/ 8-25 75 mm 3" 8 - 25 mm #3 - #8 3,10 250 Maxifix 100/ 8-25 100 mm 4" 8 - 25 mm #3 - #8 4,35 250

Multifix plastic chair spacers

Clamping spacer for use at the cross point of the reinforcement, mainly precast concrete members. Reference

Concrete cover

For steel diameter

Bar size

Weight (kg/100)

Packing Qty

Multifix 10 10 mm 3/8" ≤ 12 mm ≤ #4 0,29 2 000 Multifix 15 15 mm 5/8" ≤ 12 mm ≤ #4 0,35 1 000 Multifix 20 20 mm 3/4" ≤ 12 mm ≤ #4 0,40 1 000 Multifix 25 25 mm 1" ≤ 12 mm ≤ #4 0,50 1 000 Multifix 30 30 mm 1 1/4" ≤ 12 mm ≤ #4 0,58 1 000 Multifix 35 35 mm 1 3/8" ≤ 12 mm ≤ #4 0,58 500 Multifix 40 40 mm 1 1/2" ≤ 12 mm ≤ #4 0,68 500 Multifix 45 45 mm 1 3/4" ≤ 12 mm ≤ #4 0,75 500 Multifix 50 50 mm 2" ≤ 12 mm ≤ #4 0,89 500


Unifix chair spacers

The Unifix chair spacer is the most popular spacer for use in horizontal applications such as suspended slabs, beams, etc. Some types are also suitable for supporting top reinforcement. Unifix has good stability can seat a large range of bar diameters. Reference

Concrete cover

Weight (kg/100)

Packing Qty

Unifix 10 10 mm 3/8" 0,22 1 000 Unifix 15 15 mm 5/8" 0,34 1 000 Unifix 20 20 mm 3/4" 0,43 1 000 Unifix 25 25 mm 1" 0,60 1 000 Unifix 30 30 mm 1 1/4" 0,90 500 Unifix 35 35 mm 1 3/8" 0,95 500 Unifix 40 40 mm 1 1/2" 1,10 500 Unifix 50 50 mm 2" 1,50 500 Unifix 60 60 mm 2 1/2" 2,30 500 Unifix 70 70 mm 2 3/4" 1,85 500 Unifix 80 80 mm 3 1/4" 2,07 500 Unifix 100 100 mm 4" 3,40 400 Unifix 115 115 mm 4 1/2" 3,88 200 Unifix 125 125 mm 5" 4,20 200 Unifix 135 135 mm 5 1/4" 4,30 150 Unifix 150 150 mm 6" 7,30 200 Unifix 165 165 mm 6 1/2" 8,40 100 Unifix 180 180 mm 7" 9,40 100

Tipfix

Tipfix clip-on spacers are the optimum choice for light duty steel fixing applications, giving space in both, insitu and precast concrete work. Easy to attach. Its special base cross arrangement ensures minimum visibility on the concrete surface.

Reference

Concrete cover

For steel diameter

Bar size

Weight (kg/100)

Packing Qty

Tipfix 20 20 mm 3/4" 4 - 14 mm Mesh - #5 0,47 1 000 Tipfix 25 25 mm 1" 4 - 14 mm Mesh - #5 0,55 1 000 Tipfix 30 30 mm 1 1/4" 4 - 14 mm Mesh - #5 0,50 1 000 Tipfix 35 35 mm 1 3/8" 4 - 14 mm Mesh - #5 0,56 1 000 Tipfix 40 40 mm 1 1/2" 4 - 14 mm Mesh - #5 0,63 1 000

Snapfix sturdy plastic spacers

This stable and secure plastic spacer with good concrete flow was developed to support top fabric in slabs. The edge down arrangement of the base ensures minimum visibility on the concrete surface.

Reference

Concrete cover

For steel diameter

Bar size

Weight (kg/100)

Packing Qty

Snapfix 20 20 mm 3/4" ≤ 12 mm ≤ #4 0,80 1 000 Snapfix 25 25 mm 1" ≤ 12 mm ≤ #4 0,85 1 000 Snapfix 30 30 mm 1 1/4" ≤ 12 mm ≤ #4 0,90 1 000 Snapfix 35 35 mm 1 3/8" ≤ 12 mm ≤ #4 1,00 1 000 Snapfix 40 40 mm 1 1/2" ≤ 12 mm ≤ #4 1,10 1 000 Snapfix 50 50 mm 2" ≤ 12 mm ≤ #4 1,20 500 Snapfix 60 60 mm 2 1/2" ≤ 12 mm ≤ #4 1,30 500 Snapfix 70 70 mm 2 3/4" ≤ 12 mm ≤ #4 1,80 500 Snapfix 80 80 mm 3 1/4" ≤ 12 mm ≤ #4 2,40 250 Snapfix 90 90 mm 3 1/2" ≤ 12 mm ≤ #4 2,60 250 Snapfix 100 100 mm 4" ≤ 12 mm ≤ #4 2,80 250

Normfix heavy duty plastic spacer

Extremely sturdy plastic spacer, intended for heavy loads. With a spot supporting load capacity of 100 kg (1 kN), Normfix plastic spacers are in conformance with the requirements of the German Concrete Association. It has optimal stability and can accommodate varying bar diameters, up to 24 mm (# 8). Further positive feature is an integrated carbonation barrier.

Reference

Concrete cover

For steel diameter

Bar size

Weight (kg/100)

Packing Qty

Normfix 20 20 mm 3/4" 8 - 24 mm #2 - #8 1,90 500 Normfix 25 25 mm 1" 8 - 24 mm #2 - #8 2,20 500 Normfix 30 30 mm 1 1/4" 8 - 24 mm #2 - #8 2,07 500 Normfix 35 35 mm 1 3/8" 8 - 24 mm #2 - #8 2,60 250 Normfix 40 40 mm 1 1/2" 8 - 24 mm #2 - #8 2,90 250 Normfix 50 50 mm 2" 8 - 24 mm #2 - #8 3,40 250


Styrofix-Extra double cover plastic spacer

Styrofix-Extra is a double cover spacer that has been designed for use on soft ground, waterproof membranes, or in ground floor slabs, where its large base area prevents puncturing of polyethylene film and gives firm support to the reinforcing steel. 120 mm (5") base plate diameter.

Reference

Concrete cover

For steel diameter

Bar size

Weight (kg/100)

Packing Qty

Styrofix-Extra 15/ 20 15 or 20 mm 5/8" or 3/4" ≤ 16 mm ≤ # 5 1,20 500 Styrofix-Extra 25/ 30 25 or 30 mm 1" or 1 1/4" ≤ 16 mm ≤ # 5 1,40 500 Styrofix-Extra 40/ 50 40 or 50 mm 1 1/2" or 2" ≤ 16 mm ≤ # 5 2,40 200 Styrofix-Extra 50/ 60 50 or 60 mm 2" or 2 1/2" ≤ 16 mm ≤ # 5 3,50 100 Styrofix-Extra 60/ 70 60 or 70 mm 2 1/2" or 2 3/4" ≤ 16 mm ≤ # 5 3,60 100 Styrofix-Extra 70/ 80 70 or 80 mm 2 3/4" or 3 1/4" ≤ 16 mm ≤ # 5 3,80 100 Styrofix-Extra 90/100 90 or 100 mm 3 1/2" or 4" ≤ 16 mm ≤ # 5 4,00 100

Styrofix single cover plastic spacer

Styrofix is a plastic spacer for use on soft ground and waterproof membranes, where its square base prevents puncturing of polyethylene film. Base plate 38 x 38 mm (1 1/2" x 1 1/2").

Reference

Concrete cover

For steel diameter

Bar size

Weight (kg/100)

Packing Qty

Styrofix 10/ 4- 8 10 mm 3/8" 4 - 8 mm Mesh - #2 0,47 1 000 Styrofix 15/ 4-14 15 mm 5/8" 4 - 14 mm Mesh - #5 0,65 1 000 Styrofix 20/ 4-14 20 mm 3/4" 4 - 14 mm Mesh - #5 0,70 1 000 Styrofix 25/ 4- 8 25 mm 1" 4 - 8 mm Mesh - #2 0,56 1 000 Styrofix 30/ 4-14 30 mm 1 1/4" 4 - 14 mm Mesh - #5 0,75 500 Styrofix 35/ 4-14 35 mm 1 3/8" 4 - 14 mm Mesh - #5 0,83 500 Styrofix 50/ 6-18 50 mm 2" 6 - 18 mm # 2 - # 6 2,38 500

Quadrofix

Clamping spacer, suitable for aggregate concrete elements. Pointed legs minimise formwork contact. Reference

Concrete cover

For steel diameter

Bar size

Weight (kg/100)

Packing Qty

Quadrofix 15 15 mm 5/8" ≤ 12 mm ≤ #4 0,66 1000 Quadrofix 20 20 mm 3/4" ≤ 12 mm ≤ #4 0,70 1 000 Quadrofix 25 25 mm 1" ≤ 12 mm ≤ #4 0,74 1 000 Quadrofix 30 30 mm 1 1/4" ≤ 12 mm ≤ #4 0,78 500 Quadrofix 35 35 mm 1 3/8" ≤ 12 mm ≤ #4 0,82 500 Quadrofix 40 40 mm 1 1/2" ≤ 12 mm ≤ #4 0,86 500 Quadrofix 50 50 mm 2" ≤ 12 mm ≤ #4 0,95 500

Styrofix-Extra “Z” double cover plastic spacer

As above but with altered clamp for vertical application. Reference

Concrete cover

For steel diameter

Bar size

Weight (kg/100)

Packing Qty

Styrofix-Extra-Z 40/ 50 40 or 50 mm 1 1/2" or 2" ≤ 16 mm ≤ #5 2,60 200


Minifix circular plastic spacers

The Minifix plastic spacer is the most extensively used circular spacer for precast and on site concrete applications, with world wide sales exceeding any other plastic spacer. Universal use. Clamping tongues for a wide range of bar sizes. Wide contact surface and foot members increase load capacity and prevent tipping. Open construction which does not interrupt concrete flow. Minimal contact with formwork.

Reference

Concrete cover

For steel diameter

Bar size

Weight (kg/100)

Packing Qty.

Minifix 5/ 4- 6 5 mm 1/4" 4 - 6 mm Mesh 0,05 10 000 Minifix 10/ 4- 8 10 mm 3/8" 4 - 8 mm Mesh - #2 0,24 1 000 Minifix 12,5/4- 8 12,5 mm 1/2" 4 - 8 mm Mesh - #2 0,29 1 000 Minifix 15/ 4- 8 15 mm 5/8" 4 - 8 mm Mesh - #2 0,36 1 000 Minifix 15/ 8-12 15 mm 5/8" 8 - 12 mm #2 - #4 0,45 1 000 Minifix 15/10-14 15 mm 5/8" 10 - 14 mm #3 - #5 0,45 1 000 Minifix 15/14-18 15 mm 5/8" 4 - 18 mm Mesh - #6 0,80 1 000 Minifix 20/ 4- 8 20 mm 3/4" 4 - 8 mm Mesh - #2 0,54 1 000 Minifix 20/ 6-10 20 mm 3/4" 6 - 10 mm #2 - #3 0,50 1 000 Minifix 20/ 8-12 20 mm 3/4" 8 - 12 mm #2 - #4 0,65 1 000 Minifix 20/ 4-18 20 mm 3/4" 4 - 18 mm Mesh - #6 0,90 1 000 Minifix 20/10-14 20 mm 3/4" 10 - 14 mm #3 - #5 0,70 500 Minifix 20/12-16 20 mm 3/4" 12 - 16 mm #4 - #5 0,86 500 Minifix 25/ 4- 8 25 mm 1" 4 - 8 mm Mesh - #2 0,70 1 000 Minifix 25/ 6-10 25 mm 1" 6 - 10 mm #2 - #3 0,81 1 000 Minifix 25/10-14 25 mm 1" 10 - 14 mm #3 - #5 1,06 500 Minifix 25/ 4-18 25 mm 1" 4 - 18 mm Mesh - #6 1,15 500 Minifix 25/12-16 25 mm 1" 12 - 16 mm #4 - #5 1,29 500 Minifix 25/16-20 25 mm 1" 16 - 20 mm #5 - #6 1,40 500 Minifix 30/ 4- 8 30 mm 1 1/4" 4 - 8 mm Mesh - #2 1,19 500 Minifix 30/ 8-12 30 mm 1 1/4" 8 - 12 mm #2 - #4 1,14 500 Minifix 30/ 4-18 30 mm 1 1/4" 4 - 18 mm Mesh - #6 1,35 500 Minifix 35/ 5-10 35 mm 1 3/8" 5 - 10 mm Mesh - #3 1,22 500 Minifix 35/10-20 35 mm 1 3/8" 10 - 20 mm #3 - #6 2,05 250 Minifix 40/ 4- 8 40 mm 1 1/2" 4 - 8 mm Mesh - #2 1,60 500 Minifix 40/ 8-12 40 mm 1 1/2" 8 - 12 mm #2 - #4 2,04 500 Minifix 40/ 4-18 40 mm 1 1/2" 4 - 18 mm Mesh - #6 2,00 500 Minifix 40/12-20 40 mm 1 1/2" 12 - 20 mm #4 - #6 2,35 250 Minifix 40/20-30 40 mm 1 1/2" 20 - 30 mm #6 - #9 3,10 250 Minifix 45/ 4- 8 45 mm 1 3/4" 4 - 8 mm Mesh - #2 1,70 500 Minifix 45/ 8-12 45 mm 1 3/4" 8 - 12 mm #2 - #4 1,90 250 Minifix 45/ 4-18 45 mm 1 3/4" 4 - 18 mm Mesh - #6 2,60 500 Minifix 50/ 4-10 50 mm 2" 4 - 10 mm Mesh - #3 2,54 250 Minifix 50/ 4-18 50 mm 2" 4 - 18 mm Mesh - #6 2,80 250 Minifix 50/ 8-12 50 mm 2" 8 - 12 mm #2 - #4 2,70 250 Minifix 50/12-20 50 mm 2" 12 - 20 mm #4 - #6 2,99 250 Minifix 60/ 4-18 60 mm 2 1/2" 4 - 18 mm Mesh - #6 3,80 250 Minifix 60/12-28 60 mm 2 1/2" 12 - 28 mm #4 - #8 3,80 100 Minifix 70/12-20 70 mm 2 3/4" 12 - 20 mm #4 - #6 4,70 100 Minifix 75/ 4-18 75 mm 3" 4 - 18 mm Mesh - #6 4,50 100 Minifix 75/ 4-18 super 75 mm 3" 4 - 18 mm Mesh - #6 5,90 100 Minifix 75/20-26 75 mm 3" 20 - 26 mm #6 - #7 6,13 100 Minifix 100/ 4-18 100 mm 4" 4 - 18 mm Mesh - #6 11,30 75 Minifix 100/12-32 100 mm 4" 12 - 32 mm #4 - #9 11,30 75

Drifix heavy duty pile cage spacers

Drifix spacers for construction of reinforced foundations, such as insitu piling and diaphragm wall applications. Specifically designed to give cover to pile cage reinforcement steel. Drifix is threaded onto the helical steel and acts as a guide wheel when the reinforcement cage is lowered into the ground and also maintains the correct cover when the concrete is poured or pumped. Drifix is available with concrete covers to current code of practice.

Reference

Concrete cover

For steel diameter

Bar size

Weight (kg/100)

Packing Qty

Drifix 50/14 G 45 mm 1 3/4" ≤ 14 mm ≤ #5 4,20 100 Drifix 50/8-16 K 45 mm 1 3/4" 8 - 16 mm #3 - #5 4,20 100 Drifix 70/12 G 70 mm 2 3/4" ≤ 12 mm ≤ #4 6,70 100 Drifix 75/8-16 K 75 mm 3" 8 - 16 mm #3 - #5 6,70 100 Drifix 75 75 mm 3" ≤ 14 mm ≤ #5 7,70 100 Drifix 100 90 mm 3 1/2" ≤ 14 mm ≤ #5 12,00 100

Type G

Type K


Custom design spacers

With almost 100 years in the business, Seifert now disposes over a wealth of experience and expertise. One of Seifert’s particular strengths is in spacing application for precast concrete units. Projects from many different customers pose a continuous series of questions to the company’s technical and design teams. However, the need for simple, safe and cost effective solutions remains paramount. Seifert has been addressing these needs for many years. Our commitment is demonstrated by the on-going work into new spacing technology, in response to the changing requirements of precast concrete manufacturers - and by our success in supplying all over the world.

In the preliminary stages, customer aided design helps our team to seek, and find, the optimum solution. You may require a familiar product application or a custom design service. Either way we will take care of everything for you. Whatever your spacing or fixing problems, you can rely on Seifert to provide a faster, better and more distinctive solution. Because only Seifert has the design and technical skills borne over decades in the business; the resources to keep control over product cost and availability; and the international support network to deliver on time, within cost and to the highest standards of quality. Following are some examples of our custom design made spacers, for floor beam spacing, concrete lintels, slatted floors, prestressed sandstone or brick lintels.

Wheel type plastic spacers for light to medium duty applications

A range of extensively used plastic spacers. Alternative light weight wheel spacers that will each accommodate a range of bar diameters. Reference

Concrete cover

For steel diameter

Bar size

Weight (kg/100)

Packing Qty

Picofix 15/ 5-10 15 mm 5/8" 5 - 10 mm Mesh - #3 0,28 1 000 Picofix 20/ 5-10 20 mm 3/4" 5 - 10 mm Mesh - #3 0,30 1 000 Picofix 25/ 5-10 25 mm 1" 5 - 10 mm Mesh - #3 0,57 1 000 Picofix 30/ 5-10 30 mm 1 1/4" 5 - 10 mm Mesh - #3 0,65 1 000

Sparfix 10/ 3- 5 10 mm 3/8" 3 - 5 mm Mesh 0,07 1 000 Sparfix 15/ 3- 5 15 mm 5/8" 3 - 5 mm Mesh 0,15 1 000 Sparfix 15/ 6- 8 15 mm 5/8" 6 - 8 mm Mesh - #2 0,16 1 000 Sparfix 20/ 3- 5 20 mm 3/4" 3 - 5 mm Mesh 0,19 1 000 Sparfix 20/ 6- 8 20 mm 3/4" 6 - 8 mm Mesh - #2 0,21 1 000

Ultrafix 15/ 4-10 15 mm 5/8" 4 - 10 mm Mesh - #3 0,30 1 000 Ultrafix 20/ 4-10 20 mm 3/4" 4 - 10 mm Mesh - #3 0,48 1 000 Ultrafix 20/ 5-16 20 mm 3/4" 5 - 16 mm Mesh - #5 0,53 1 000 Ultrafix 25/ 4-10 25 mm 1" 4 - 10 mm Mesh - #3 0,60 1 000 Ultrafix 25/ 5-16 25 mm 1" 5 - 16 mm Mesh - #5 0,74 1 000 Ultrafix 30/ 4-12 30 mm 1 1/4" 4 - 10 mm Mesh - #3 0,90 1 000 Ultrafix 30/ 5-16 30 mm 1 1/4" 5 - 16 mm Mesh - #5 1,05 500 Ultrafix 35/ 5-16 35 mm 1 3/8" 5 - 16 mm Mesh - #5 1,40 500 Ultrafix 40/ 5-16 40 mm 1 1/2" 5 - 16 mm Mesh - #5 1,65 500 Ultrafix 50/ 5-16 50 mm 2" 5 - 16 mm Mesh - #5 2,10 250 Type 5-16

Type 4-10

Klemmfix heavy duty plastic spacers

Klemmfix is a sturdy plastic spacer, designed for heavy duty applications, both vertical and horizontal. Elastic barbs prevent spacer from falling off, clamp lips prevent spacer from slipping sideways even with different steel diameters. Extra-wide bar support area and footing increase load capacity and avoid tipping. Klemmfix range withstands extreme vibrations and is very popular in civil engineering and prefabrication.

Reference

Concrete cover

For steel diameter

Bar size

Weight (kg/100)

Packing Qty

Klemmfix 150/ 6-12 15 mm 5/8" 6 - 12 mm #2 - #4 0,42 1 000 Klemmfix 150/13-20 15 mm 5/8" 13 - 20 mm #4 - #6 0,71 500 Klemmfix 200/ 6-12 20 mm 3/4" 6 - 12 mm #2 - #4 0,96 1 000 Klemmfix 200/13-20 20 mm 3/4" 13 - 20 mm #4 - #6 0,99 500 Klemmfix 250/ 6-12 25 mm 1" 6 - 12 mm #2 - #4 1,00 500 Klemmfix 250/13-20 25 mm 1" 13 - 20 mm #4 - #6 1,65 500 Klemmfix 300/ 6-12 30 mm 1 1/4" 6 - 12 mm #2 - #4 1,31 500 Klemmfix 300/13-20 30 mm 1 1/4" 13 - 20 mm #4 - #6 1,76 500 Klemmfix 350/ 6-12 35 mm 1 3/8" 6 - 12 mm #2 - #4 1,67 500 Klemmfix 350/13-20 35 mm 1 3/8" 13 - 20 mm #4 - #6 2,60 250 Klemmfix 400/ 6-12 40 mm 1 1/2" 6 - 12 mm #2 - #4 2,00 250 Klemmfix 400/13-20 40 mm 1 1/2" 13 - 20 mm #4 - #6 2,80 250 Klemmfix 500/ 6-12 50 mm 2" 6 - 12 mm #2 - #4 3,50 250 Klemmfix 500/13-20 50 mm 2" 13 - 20 mm #4 - #6 4,10 200 Klemmfix 500/12-28 50 mm 2" 12 - 28 mm #4 - #9 5,62 200 Klemmfix 600/12-28 60 mm 2 1/2" 12 - 28 mm #4 - #9 6,14 100


Autofix assembly system manufacture line integration for the production of concrete ceilings

Slab ceilings and similar precast concrete units are manufactured with the assistance of most modern equipment. The Autofix assembly system allows the use of spacers which are ideally suited to these automatic processes. The Autofix-system provides semi- or fully automatic spacer fitting. Transverse reinforcement can be subsequently used as a spacer. The machine meets all requirements found in modern precast concrete plants. No adjustment is needed to achieve different concrete covers or utilise various steel diameters. A more detailed brochure is available on request.

Autofix spacers for the automated manufacture of slab ceilings

The Autofix plastic spacer is the most extensively used spacer in the fully or semi-automated manufacture of precast concrete slab ceilings. This type of spacer is an integral part of the Autofix-assembly system. Autofix spacers are fitted to transverse reinforcement.

Reference

Concrete cover

Steel diameter

Weight (kg/pallet)

Packing quantity

Autofix 10/5-6 SR 10 mm 5-6 mm 165,0 60 000 G Autofix 12/6 R 12 mm 6 mm 115,0 40 000 G Autofix 15/10-12 SR 15 mm 10-12 mm 131,0 40 000 G Autofix 15/14 SR 15 mm 14 mm 127,0 40 000 E Autofix 15/4,5 15 mm 4,5 mm 155,0 40 000 G Autofix 15/6 R 15 mm 6 mm 135,0 40 000 G Autofix 15/6 SR 15 mm 6 mm 147,0 40 000 G Autofix 15/6-10 SD 15 mm 6-10 mm 167,0 40 000 G Autofix 15/6-8 S 15 mm 6-8 mm 163,0 40 000 G Autofix 15/6-8 SR 15 mm 6-8 mm 139,0 40 000 G Autofix 15/8 S 15 mm 8 mm 162,0 42 000 E Autofix 15/8-10 S 15 mm 8-10 mm 213,5 42 000 E Autofix 20/10-12 SRD 20 mm 10-12 mm 221,4 48 000 G Autofix 20/6 S 20 mm 6 mm 264,6 48 000 G Autofix 20/6 SR 20 mm 6 mm 226,2 48 000 G Autofix 20/6-10 SD 20 mm 6-10 mm 274,2 48 000 G Autofix 20/6-10 SRD 20 mm 6-10 mm 226,2 48 000 G Autofix 20/6-8 S 20 mm 6-8 mm 288,6 48 000 G Autofix 20/6-8 SA 20 mm 6-8 mm 292,0 48 000 G Autofix 20/6-8 SF 20 mm 6-8 mm 317,4 48 000 G Autofix 20/8-10 S 20 mm 8-10 mm 274,2 48 000 G Autofix 25/6 S 25 mm 6 mm 217,8 31 200 E Autofix 25/6 SR 25 mm 6 mm 211,6 31 200 E Autofix 25/6-10 SD 25 mm 6-10 mm 245,9 31 200 E Autofix 25/6-10 SDP 25 mm 6-10 mm 252,1 31 200 E Autofix 25/6-8 S 25 mm 6-8 mm 220,9 31 200 E Autofix 25/6-8 SA 25 mm 6-8 mm 214,7 31 200 E Autofix 25/8 S 25 mm 8 mm 227,2 31 200 E Autofix 25/8-10 S 25 mm 8-10 mm 233,4 31 200 E Autofix 30/6 S* 30 mm 6 mm 180,1 19 200 E Autofix 30/6-8 S 30 mm 6-8 mm 180,1 19 200 E Autofix 30/6 SDP* 30 mm 6 mm 252,6 19 200 E Autofix 30/6 SR* 30 mm 6 mm 187,8 19 200 E Autofix 30/8 S* 30 mm 8 mm 184,0 19 200 E Autofix 30/8-10 S* 30 mm 8-10 mm 191,6 19 200 E

Type S

Type SD

All Autofix spacers are available in either virgin or recycled material.

Please add a ‘G’ to the reference code to obtain versions made from recycled material.

Versions: S butterfly type, improved design SA square type SD butterfly type, particularly suitable for 8-10 mm steel SDP butterfly type, particularly suitable for 8-10 mm steel, reinforced SF butterfly type, reinforced clamp SR round type, improved design SRD round type, improved design with larger clip Packaging: E boxed (650 pcs), on euro pallets G bagged (1 000 pcs), on girder pallets


Rod spacers

The Seifert range of Extrafix rod spacers are reinforcement bars where plastic spacers have been pressed on. Those rods are not to be understood as conventional spacers. Rod spacers fulfil static functions only and are part of the reinforcement to which additional rebars can be laid. Therefore usage of mats is not necessary. Extrafix rods can be manufactured on-site when using our Autofix Assembly System along with Autofix Spacers. A multitude of rod spacers with different spacer shapes and bar diameters are available on special request. First figure in the order code indicates the lower border, the second figure the top border of the steel. Concrete cover is equivalent with the lower border.

Visit us in the internet:

www.seifert.de

Extrafix

Reinforcing steel, 6 mm Ø, with pressed-on plastic spacers, packed on Euro-Pallets. Stock lengths 215 cm, 235 cm and 245 cm. Other sizes are available on request. Extrafix rod spacers are also available with round spacers on request. Reference

Concrete cover

Steel diameter

Weight (kg/pallet)

Packing Qty

Extrafix 12/18-6-215 12 mm 6 mm 1 020 2 100 pcs = 4 515 m Extrafix 12/18-6-235 12 mm 6 mm 1 115 2 100 pcs = 4 935 m Extrafix 12/18-6-245 12 mm 6 mm 1 160 2 100 pcs = 5 145 m Extrafix 15/21-6-215 15 mm 6 mm 1 020 2 100 pcs = 4 515 m Extrafix 15/21-6-235 15 mm 6 mm 1 115 2 100 pcs = 4 935 m Extrafix 15/21-6-245 15 mm 6 mm 1 160 2 100 pcs = 5 145 m Extrafix 20/26-6-215 20 mm 6 mm 610 1 500 pcs = 3 225 m Extrafix 20/26-6-235 20 mm 6 mm 670 1 500 pcs = 3 525 m Extrafix 20/26-6-245 20 mm 6 mm 695 1 500 pcs = 3 675 m Extrafix 25/31-6-215 25 mm 6 mm 495 1 000 pcs = 2 150 m Extrafix 25/31-6-235 25 mm 6 mm 540 1 000 pcs = 2 350 m Extrafix 25/31-6-245 25 mm 6 mm 560 1 000 pcs = 2 450 m Extrafix 30/36-6-215 30 mm 6 mm 400 800 pcs = 1 720 m Extrafix 30/36-6-235 30 mm 6 mm 435 800 pcs = 1 880 m Extrafix 30/36-6-245 30 mm 6 mm 450 800 pcs = 1 960 m

Wet cast and fibre reinforced concrete spacers 21

Double Cover Spacer B' is without wire. For version with wire use code BD, i.e. 'Double Cover Spacer BD'

Double cover concrete spacers for heavy duty applications

Double cover concrete spacers are manufactured from fibre reinforced concrete and are the optimal choice for heavy duty spacing applications. They are most suitable for sulphate resistant and deep temperature applications and are as strong as the surrounding concrete, giving excellent bond and having the same expansion characteristics as concrete, eliminating any point of potential weakness. They are recommended for use in vertical applications, but are suitable for both, horizontal and vertical reinforcement. The design allows very good concrete flow and minimises the contact area.

Reference

Concrete cover

Weight (kg/100)

Packing Qty

Double cover spacer B25/30 25/30 mm 1" / 1 1/4" 3,84 20 000 Double cover spacer B40/50 40/50 mm 1 1/2" / 2" 9,80 10 000

Type BD

Single cover concrete spacers for heavy duty applications

Single cover concrete spacers are manufactured from fibre reinforced concrete and are the optimal choice for heavy duty spacing applications. They are most suitable for sulphate resistant and deep temperature applications and are as strong as the surrounding concrete, giving excellent bond and having the same expansion characteristics as concrete, eliminating any point of potential weakness. Single cover spacers have a wide base for maximum stability when used as recommended for horizontal applications.

'Single Cover Spacer A' is without wire. For version with wire use code AD, i.e. 'Single Cover Spacer AD'

Reference

Concrete cover

Weight (kg/100)

Packing Qty

Single cover spacer A 20 20 mm 3/4" 1,46 50 000 Single cover spacer A 25 25 mm 1" 2,01 40 000 Single cover spacer A 30 30 mm 1 1/4" 3,64 20 000 Single cover spacer A 40 40 mm 1 1/2" 5,70 20 000 Single cover spacer A 50 50 mm 2" 7,68 10 000 Single cover spacer A 60 60 mm 2 3/8" 10,00 8 000

Type A

Type

Reference

Concrete cover

Width

Weight (kg/100)

Packing Qty

Double cover spacer B15/20F 15/20 mm 20 mm 1,95 50 000 Double cover spacer B25/30F 25/30 mm 20 mm 5,10 20 000 Double cover spacer B30/40F 30/40 mm 22 mm 7,70 15 000 Double cover spacer B35/45F 35/45 mm 22 mm 9,90 10 000 Double cover spacer B40/50F 40/50 mm 20 mm 7,60 15 000 Double cover spacer B50/60F 50/60 mm 28 mm 17,70 5 000 Double cover spacer B60/75F 60/75 mm 28 mm 26,30 4 000 Double cover spacer B65/70F 65/70 mm 28 mm 25,95 4 000

Double cover concrete spacers type F

Double cover concrete spacers with flat base manufactured from extruded fibre reinforced concrete, for heavy duty applications. Particularly suitable for sulphate resistant and deep temperature application. Excellent bond due to being as strong as the surrounding concrete and having the same expansion characteristics as concrete they eliminate any point of potential weakness. Flat base design guarantees good stability and includes a centrally located hole for attachment to the reinforcement with tying wire.

N E W

Triple cover concrete spacers for heavy duty applications

Triple cover concrete spacers are manufactured from fibre reinforced concrete and are the optimal choice for heavy duty spacing applications. They are most suitable for sulphate resistant and deep temperature applications and are as strong as the surrounding concrete, giving excellent bond and having the same expansion characteristics as concrete, eliminating any point of potential weakness. They are recommended for use in vertical applications, but are suitable for both, horizontal and vertical reinforcement. The design allows very good concrete flow and minimises the contact area.

Triple Cover Spacer B' is without wire. For version with wire use code BD, i.e. 'Triple Cover Spacer BD'

Reference

Concrete cover

Weight (kg/100)

Packing Qty

Triple cover spacer B20/25/30 20/25/30 mm 3/4" / 1" / 1 1/4" 2,58 25 000 Triple cover spacer B35/40/50 35/40/50 mm 3/8" / 1 1/2" / 2" 8,88 10 000 Triple cover spacer B45/55/60 45/55/60 mm 1 3/4" / 2 1/4" / 2 1/2" 15,60 5 000

Type BD


Concrete snake

Linear spacers manufactured from extruded fibre reinforced concrete. Minimal formwork contact due to base construction. Snake-design prevents toppling.

Reference

Concrete cover

Length (straight)

Weight (kg/100)

Packing Qty

Concrete snake 25/20 20 mm 250 mm 11,15 4 800 Concrete snake 25/25 25 mm 250 mm 13,55 4 000 Concrete snake 25/30 30 mm 250 mm 18,30 3 200 Concrete snake 25/35 35 mm 250 mm 19,60 3 200 Concrete snake 25/40 40 mm 250 mm 25,75 2 500 Concrete snake 25/50 50 mm 250 mm 42,40 2 000

Also available in lengths 500 mm, 800 mm und 1.000 mm.

N E W

Concrete chamfers with hook for heavy duty applications

Concrete chamfers with hooks are manufactured in short pieces of either 18 cm (7") or 33 cm (13") length. Their special feature include a cast-in hook for clamping onto vertical reinforcement, thus greatly reducing fixing cost. They are most suitable for sulphate as well as for deep temperature resistant applications. Concrete chamfers with a cover of 35 mm, 45 mm, 55 mm and 60 mm are available on request.

Reference

Concrete cover

Length

Weight (kg/100)

Packing Qty

Concrete chamfer 20H-18 20 mm 3/4" 18 cm 7" 10,40 250 Concrete chamfer 20H-33 20 mm 3/4" 33 cm 13" 15,00 150 Concrete chamfer 25H-18 25 mm 1" 18 cm 7" 14,40 125 Concrete chamfer 25H-33 25 mm 1" 33 cm 13" 25,10 75 Concrete chamfer 30H-18 30 mm 1 1/4" 18 cm 7" 16,00 125 Concrete chamfer 30H-33 30 mm 1 1/4" 33 cm 13" 28,30 75 Concrete chamfer 40H-18 40 mm 1 1/2" 18 cm 7" 24,60 100 Concrete chamfer 40H-33 40 mm 1 1/2" 33 cm 13" 45,00 50 Concrete chamfer 50H-18 50 mm 2" 18 cm 7" 39,40 50 Concrete chamfer 50H-33 50 mm 2" 33 cm 13" 71,25 40

Concrete chamfers for heavy duty applications

Heavy duty concrete chamfers are manufactured in both 33 cm (13 ") and 1 metre (40 ") lengths. Fixing costs are greatly reduced as the chamfers can be simply laid on the formwork or ground floor sub-base prior to the loading of the reinforcement cage. Other applications include their use as kickers and formwork spacers. They are most suitable for sulphates as well as for deep temperature resistant applications. Concrete chamfers with a cover of 35 mm, 45 mm, 55 mm and 60 mm are available on request.

Reference

Concrete cover

Length

Weight (kg/100)

Packing Qty

Concrete chamfer 20- 33 20 mm 3/4" 33 cm 7" 17,20 150 Concrete chamfer 20-100 20 mm 3/4" 100 cm 13" 54,70 1 500 Concrete chamfer 25- 33 25 mm 1" 33 cm 7" 24,80 75 Concrete chamfer 25-100 25 mm 1" 100 cm 13" 69,70 1 000 Concrete chamfer 30- 33 30 mm 1 1/4" 33 cm 7" 37,50 60 Concrete chamfer 30-100 30 mm 1 1/4" 100 cm 13" 113,35 750 Concrete chamfer 40- 33 40 mm 1 1/2" 33 cm 7" 68,75 40 Concrete chamfer 40-100 40 mm 1 1/2" 100 cm 13" 199,00 400 Concrete chamfer 50- 33 50 mm 2" 33 cm 7" 89,20 25 Concrete chamfer 50-100 50 mm 2" 100 cm 13" 263,20 250

Concrete square bar

Linear spacers manufactured from extruded fibre reinforced concrete, for extremely heavy duty applications. Particularly suitable for sulphate resistant and deep temperature application. Excellent bond due to being as strong as the surrounding concrete and having the same expansion characteristics as concrete they eliminate any point of potential weakness. Length approx. 1 metre. Reference

Concrete cover

Weight (kg/100)

Packing Qty

Concrete square bar 25 x 25 25 mm 124,50 800 Concrete square bar 30 x 30 30 mm 179,00 500 Concrete square bar 35 x 35 35 mm 243,75 400 Concrete square bar 40 x 40 40 mm 318,50 300 Concrete square bar 45 x 45 45 mm 403,00 250 Concrete square bar 50 x 50 50 mm 498,00 250 Concrete square bar 60 x 60 60 mm 716,00 125 Concrete square bar 75 x 75 75 mm 1 118,75 80

N E W


Betofix formwork spacer tube

Formwork spacer tube made from fibre concrete, which is suitable for watertight spacing (instructions available on request). The Betofix group of products has accessories such as a two component adhesive (suitable for drinking water applications), a water barrier, plastic plugs for subsequent sealing, caps and couplings. Reference

Internal diameter

Length

Weight (kg/100)

Packing Qty

Betofix tube 22 mm 1 250 mm 194,20 500 Betofix concrete plug 22 mm (O.D.) 20 mm 1,55 1 000 Betofix adhesive (2 comp.) 0,8+0,4 Betofix coupler 22 mm (O.D.) 0,43 250 Betofix water barrier 22 mm (O.D.) 7,00 100 Betofix cap 22 mm (O.D.) 0,19 250

Reference

Internal diameter

Length

Weight (kg/100)

Packing Qty

Betofix 14 22 mm 140 mm 26,10 100 Betofix 15 22 mm 150 mm 28,40 80 Betofix 18 22 mm 180 mm 33,50 80 Betofix 20 22 mm 200 mm 38,00 60 Betofix 25 22 mm 250 mm 46,60 50 Betofix 30 22 mm 300 mm 55,50 40 Betofix 40 22 mm 400 mm 74,50 40

Betofix tubes, cut-to size. Other sizes are available on request.

Sofix-K Heavy duty concrete spacers

Sofix-K is a heavy duty wet cast concrete spacer for horizontal and vertical applications with round form completed by 3 rounded base rests for minimal surface contact. The incorporated plastic clip facilitates simple attachment to the reinforcement. Reference

Concrete cover

Weight (kg/100)

Packing Qty

Sofix-K 25 25 mm 1" 5,90 16 000 Sofix-K 30 30 mm 1 1/4" 6,30 14 000 Sofix-K 35 35 mm 1 3/8" 9,10 12 000 Sofix-K 40 40 mm 1 1/2" 12,25 10 000 Sofix-K 50 50 mm 2" 13,60 7 500

Sofix-Q Heavy duty concrete spacers

A heavy duty wet cast concrete spacer for horizontal and vertical applications with a quadratic base form for additional stability. The incorporated cast-in tying wire facilitates easy attachment to reinforcement.

Reference

Concrete cover

Width top

Width base

Weight (kg/100)

Packing Qty

Sofix-Q 20 20 mm 3/4" 38 mm 32 mm 5,30 27 000 Sofix-Q 25 25 mm 1" 38 mm 32 mm 7,00 16 500 Sofix-Q 30 30 mm 1 1/4" 38 mm 32 mm 8,40 13 500 Sofix-Q 35 35 mm 1 3/8" 40 mm 32 mm 10,70 15 000 Sofix-Q 40 40 mm 1 1/2" 43 mm 35 mm 14,05 10 000 Sofix-Q 45 45 mm 1 3/4" 43 mm 35 mm 15,10 8 000 Sofix-Q 50 50 mm 2" 45 mm 37 mm 16,00 6 750 Sofix-Q 65 65 mm 2 1/2" 48 mm 37 mm 23,00 5 670 Sofix-Q 75 75 mm 3" 50 mm 37 mm 30,80 5 670

Reference

Concrete cover

Weight (kg/100)

Packing Qty

Sofix-KF 25 25 mm 1" 5,90 16 000 Sofix-KF 30 30 mm 1 1/4" 6,30 14 000

Sofix-KF Heavy duty concrete spacers

Sofix-KF is a heavy duty wet cast concrete spacer for horizontal and vertical applications with round form completed by 3 flat base rests for added stability. The incorporated plastic clip facilitates simple attachment to the reinforcement.

N E W

Lifting, fixing and connecting precast concrete 24

Lifting and fixing precast concrete components

Plan ahead to save time consuming drilling - if socket positions are worked out at the design stage, then components with sockets can be easily mass produced . Whether they are inserted into precast concrete units or during casting on site, with our systems we can offer the right socket for any particular application.

SEIFERT - a company with almost 100 years of experience. We have been successful in construction technology for decades. Our continuous readiness to develop, our safety policy and the quality products which result from this mean that Seifert has achieved world wide recognition. We are committed to maintaining this recognition - you can build on that as our partner in business.

Additional information

Please contact us via fax: +49-2355 909999 or e-mail: [email protected] to receive your free copy of “Installation and Application Instructions for Seifert Lifting and Fixing Accessories”.

Transfix B lifting device

Cast-in transport system for precast concrete units. Consisting of a plastic box with lid and galvanised ring bolt according to DIN 763 for use with standard transporting hooks. Transfix can be nailed to formwork. After casting, Transfix is simply closed with a matching cover. Safety factor = 5 against rupture (Concrete compressive strength of 35 N/mm²). Anchoring in concrete with additional reinforcement stirrup (please refer to Governmental Lab Test Report 211136882). Before use the cautionary notes on page 54 must be observed.

Reference

Overall dimensions

Load rating

Weight (kg/100)

Packing Qty

Transfix B 115 x 55 x 20 mm 1 250 kg 12,5 kN 14,80 50

Hebefix lifting device

Cast-in lifting device for manhole and drain covers, consisting of a stainless steel hook which anchors laterally in the concrete, and a plastic box to leave a sufficient recess for lifting. Before use the cautionary notes on page 54 must be observed. May not be used for transport.

Reference

Load rating

Weight (kg/100)

Packing Qty

Hebefix 150 kg 1,5 kN 2,43 250

Lifting sockets

Galvanised, seamless tube lifting insert with metric round thread. The long-established insert is suitable for most precast concrete units. Anchoring in the concrete is obtained by a reinforcing tail inserted in the transverse bore hole. Sockets made from stainless steel are available on request. Seifert instructions for application and installation must be observed. Before use the cautionary notes on page 54 must be observed.

Reference

Overall Length

Thread Depth

Hole Diameter

Load Rating *

Weight (kg/100)

Packing Qty

Lifting socket Rd12 40 mm 22 mm 8,0 mm 500 kg 2,50 100 Lifting socket Rd14 47 mm 25 mm 10,5 mm 800 kg 4,60 100 Lifting socket Rd16 54 mm 27 mm 13,0 mm 1 200 kg 7,20 100 Lifting socket Rd18 65 mm 34 mm 13,0 mm 1 600 kg 12,10 100 Lifting socket Rd20 69 mm 35 mm 15,5 mm 2 000 kg 16,20 100 Lifting socket Rd24 78 mm 43 mm 18,0 mm 2 500 kg 21,60 100 Lifting socket Rd30 103 mm 56 mm 22,5 mm 4 000 kg 47,50 50 Lifting socket Rd36 125 mm 68 mm 27,5 mm 6 300 kg 78,10 25 Lifting socket Rd42 145 mm 80 mm 32,0 mm 8 000 kg 120,50 20 Lifting socket Rd52 195 mm 100 mm 40,0 mm 12 500 kg 255,90 10

* Prior to casting and using largest diameter rebar.


Waved end heavy duty inserts

Waved end heavy duty inserts rely on a specially curved reinforcement bar that has been swaged onto a galvanised, threaded ferrule. Stainless steel versions and different rod lengths are available on request. Please note that other steel diameters or different rod lengths may result in reduction of load level. Seifert instructions for application and installation must be observed. Before use the cautionary notes on page 54 must be observed. Reference

Thread

Length

Load rating

Weight (kg/100)

Packing Qty

Waved end insert M/Rd12 M/Rd12 150 mm 500 kg 10,0 50 Waved end insert Rd14 Rd14 180 mm 800 kg 17,0 50 Waved end insert M/Rd16 M/Rd16 230 mm 1 200 kg 31,0 50 Waved end insert Rd18 Rd18 260 mm 1 600 kg 41,0 25 Waved end insert M/Rd20 M/Rd20 260 mm 2 000 kg 51,0 25 Waved end insert M/Rd24 M/Rd24 300 mm 2 500 kg 73,0 25 Waved end insert M/Rd30 M/Rd30 420 mm 4 000 kg 162,0 10 Waved end insert M/Rd36 M/Rd36 460 mm 6 300 kg 248,0 10 Waved end insert M/Rd42 M/Rd42 500 mm 8 000 kg 345,0 5

Lifting loops

A threaded ferrule swaged onto a high quality, flexible wire rope loop, in accordance with German standards DIN 3060 and DIN 3064. Other sizes are available on request. Seifert lifting loops are to be used as set out in Seifert operating instructions and in conjunction with the installation and application instructions for the Seifert lifting accessories, such as Lifting sockets and Waved end inserts. Seifert lifting loops have been tested for operating safety and are approved by the Federation of Commercial Trade Associations and are subject to tests during production. Before use the cautionary notes on page 54 must be observed.

Reference

Thread

Length

Load rating

Weight (kg/100)

Packing Qty

Lifting loop M/Rd12 M/Rd12 ~ 130 mm 500 kg 5,5 50 Lifting loop Rd14 Rd14 ~ 150 mm 800 kg 8,0 50 Lifting loop M/Rd16 M/Rd16 ~ 170 mm 1 200 kg 11,5 50 Lifting loop Rd18 Rd18 ~ 190 mm 1 600 kg 18,0 25 Lifting loop M/Rd20 M/Rd20 ~ 210 mm 2 000 kg 25,5 25 Lifting loop M/Rd24 M/Rd24 ~ 260 mm 2 500 kg 44,0 25 Lifting loop M/Rd30 M/Rd30 ~ 340 mm 4 000 kg 73,0 10 Lifting loop M/Rd36 M/Rd36 ~ 380 mm 6 300 kg 128,0 10 Lifting loop M/Rd42 M/Rd42 ~ 420 mm 8 000 kg 214,0 5

Polypropylene cast-in lifting loops

Polypropylene cast-in lifting loops provide an economical method of lifting precast concrete units. The polypropylene cast-in lifting loops are situated in the concrete element at the open side of the mould. The loops are flexible and can be connected directly to a crane hook. Other sizes are available on request. Before use the cautionary notes on page 54 must be observed.

Reference

Rope Diameter

Length

Load rating

Weight (kg/100)

Packing Qty

Polyprop cast-in lifting loop 200 6 mm 200 mm 150 kg 1,80 100 Polyprop cast-in lifting loop 220 8 mm 220 mm 250 kg 3,00 100 Polyprop cast-in lifting loop 235 10 mm 235 mm 360 kg 5,00 50 Polyprop cast-in lifting loop 255 12 mm 255 mm 500 kg 8,00 50 Polyprop cast-in lifting loop 280 14 mm 280 mm 875 kg 13,50 10 Polyprop cast-in lifting loop 330 16 mm 330 mm 1 000 kg 23,00 10


Fixing dowels

Galvanised fixing inserts with metric thread and perforated flat end. Fixing inserts must be used with reinforcement tail according to DIN 1045. These sockets must not be used as lifting anchors. Other sizes and fixing dowels with an integral cross pin are available on request. Inserts made from stainless steel also on request. Please observe Seifert instruction for application and installation. Before use the cautionary notes on page 54 must be observed. Reference

Thread

Length

Weight (kg/100)

Packing Qty

Fixing dowel M 8- 40 M 8 40 mm 1,10 500 Fixing dowel M10- 50 M10 50 mm 1,50 500 Fixing dowel M12- 60 M12 60 mm 2,60 400 Fixing dowel M16- 80 M16 80 mm 10,30 200 Fixing dowel M20-100 M20 100 mm 16,00 100 Fixing dowel M24-120 M24 120 mm 27,90 50

Crimped fixing socket

Galvanised fixing inserts with metric thread and flat, crimped end. This insert is particularly suitable for shallow concrete units where there is insufficient depth to install a hairpin reinforcing bar anchorage. Please observe Seifert instructions for application and installation. These sockets must not be used as lifting anchors. Before use the cautionary notes on page 54 must be observed. Reference

Thread

Length

Weight (kg/100)

Packing Qty

Crimped fixing socket M 8-40 M 8 40 mm 1,35 100 Crimped fixing socket M10-50 M10 50 mm 2,05 100 Crimped fixing socket M12-60 M12 60 mm 5,85 100 Crimped fixing socket M12-70 M12 70 mm 6,80 100 Crimped fixing socket M16-60 M16 60 mm 6,65 100 Crimped fixing socket M16-90 M16 90 mm 9,85 100

Fixing sockets

Thick-walled, heavy duty steel cast-in socket with metric thread. Higher tensile load thanks to punched flat end instead of perforated cross hole. Yellow, electro galvanised. Multi-purpose socket. High draw-out values can be obtained even without reinforcement. Inserts with pre-assembled nailing plate are available on request. These sockets must not be used as lifting anchors. Before use the cautionary notes on page 54 must be observed. Reference

Thread

Length

Weight (kg/100)

Packing Qty

Fixing socket M 8-40 M 8 40 mm 1,35 100 Fixing socket M10-50 M10 50 mm 2,05 100 Fixing socket M12-60 M12 60 mm 5,85 100 Fixing socket M12-70 M12 70 mm 6,80 100 Fixing socket M16-60 M16 60 mm 6,65 100 Fixing socket M16-90 M16 90 mm 9,85 100

Crimped fixing socket with Fixing plate

As crimped fixing sockets above but with pre-assembled fixing plates for attachment to steel formwork. Please observe Seifert instructions for application and installation. These sockets must not be used as lifting anchors. Before use the cautionary notes on page 54 must be observed. Reference

Thread

Length

Weight (kg/100)

Packing Qty

Crimped fixing socket M 8-40 K M 8 40 mm 1,85 100 Crimped fixing socket M10-50 K M10 50 mm 2,55 100 Crimped fixing socket M12-60 K M12 60 mm 6,40 100 Crimped fixing socket M12-70 K M12 70 mm 7,35 100 Crimped fixing socket M16-60 K M16 60 mm 7,30 100 Crimped fixing socket M16-90 K M16 90 mm 10,50 100


Snap off fixing plugs

Simply screw the fixing plug onto the insert and push into a pre-drilled hole on the internal mould face. For use where external mould face is inaccessible, such as battery moulds.

Reference

for thread

Pin diameter

Weight (kg/100)

Packing Qty

Snap off fixing plug M 8 M 8 9 mm 0,24 1 000 Snap off fixing plug M10 M10 9 mm 0,30 1 000 Snap off fixing plug M12 M12 9 mm 0,35 1 000 Snap off fixing plug M16 M16 9 mm 0,45 1 000

Fixing plate for steel formwork

Cast-in sockets and fixing dowels are held in position by means of the fixing plate, leaving the insert in a 5 mm deep recess. The fixing plate can be attached to steel formwork by means of an appropriate glue (e.g. hot glue). After striking formwork, fixing plates can be released with a screw driver. Other sizes available on request.

Reference

for thread

Plate diameter

Weight (kg/100)

Packing Qty

Fixing plate M 8 M 8 48 mm 0,50 500 Fixing plate M10 M10 48 mm 0,52 500 Fixing plate M12 M12 48 mm 0,57 500 Fixing plate M16 M16 48 mm 0,65 500 Fixing plate M20 M20 48 mm 0,72 500 Fixing plate M24 M 24 48 mm 0,83 500

Re-usable plastic nailing plate

Simply nail in position on the timber formwork and screw the insert onto plastic plate. After striking the formwork, unscrew the plastic nailing plate from the insert, leaving the insert in a 10 mm deep recess. Plastic plates for use with adhesive are available without nailing holes. Please refer to page 41 for magnetic versions.

Reference

for thread

Plate diameter

Weight (kg/100)

Packing Qty

Nailing plate M 8 M 8 48 mm 0,55 500 Nailing plate M10 M10 48 mm 0,56 500 Nailing plate M12 M12 48 mm 0,59 500 Nailing plate M14 M14 48 mm 0,65 500 Nailing plate M16 M16 48 mm 0,67 500 Nailing plate M18 M18 48 mm 0,71 500 Nailing plate M20 M20 48 mm 0,74 500 Nailing plate M24 M24 48 mm 0,85 500 Nailing plate M27 M27 58 mm 1,27 500 Nailing plate M30 M30 58 mm 1,38 500 Nailing plate Rd30 Rd30 58 mm 1,38 500 Nailing plate DG15 DG15/17 48 mm 0,80 500

Re-usable plastic nailing plate with deeper recess

As Nailing plate above but leaving inserts in a 20 mm deep recess. Reference

for thread

Plate diameter

Weight (kg/100)

Packing Qty

Nailing plate 20M 8 M 8 48 mm 1,33 500 Nailing plate 20M10 M10 48 mm 1,07 500 Nailing plate 20M12 M12 48 mm 1,10 500 Nailing plate 20M14 M14 48 mm 1,16 500 Nailing plate 20M16 M16 48 mm 1,18 500 Nailing plate 20M20 M20 48 mm 1,21 500 Nailing plate 20M24 M24 48 mm 1,22 500


Propfix multi-purpose insert for use with tie rods

Multi purpose insert for use with tie rods DG 15/17. Propfix DG15, consisting of a plastic insert moulded over a galvanised steel nut according to German standard DIN 18216. Suitable for single sided anchorages, e.g. for climbing formwork, safe suspension of folding platforms or cantilever positioning, in combination with stop-anchors (counter plate, hexagon nut and custom length tie rod). Concrete cover 35 mm, overall length 75 mm. Positioning disc and closing cap on request. Tested and approved.

Reference

Thread

Length

Weight (kg/100)

Packing Qty

Propfix DG15 DG 15/17 75 mm 4,85 100 Propfix nailing plate 0,25 250 Propfix closing cap 0,25 250

Propfix fixing system

An economical and alternative system to steel dowels. Multipurpose system to suit both site construction and precast concrete applications, e.g. seating rails to concrete, fastening guard rails, anchoring of assembly pillars for alignment of reinforced concrete walls, fixing of bearing systems, etc. Propfix consists of a plastic insert moulded over a galvanised steel nut, according to DIN specification which protects against corrosion and provides sufficient concrete cover. Propfix has very good shear strength characteristics because of shifting main stress point. Self-anchoring due to clever design. Easy insertion of threaded bars and screws as well as sufficient exit section. Easy to fix on both steel or timber formwork with nailing plate. Integrated webs allow additional tying to reinforcement. Supplied with a cap to preventing concrete ingress.

Reference

Thread

Length

Load rating

Weight (kg/100)

Packing Qty

Propfix M16 M16 90 mm 1 250 kg 5,67 100 Propfix nailing plate 0,25 250 Propfix closing cap 0,25 250

Optifix-HW plastic insert

Made from virgin plastic material Optifix-HW is the economical alternative for attaching braces to concrete elements during construction. Particularly suitable for sandwich panels. No need for expensive and time consuming installation of subsequent plugs or self anchoring channels. The ribbed external design provides a very firm seating in the concrete element. The attached fixing plate can be easily removed due to a cleverly constructed plane of weakness. Totally impermeable to water making Optifix-HW a very cost effective alternative to stainless steel. Installation: Simply attach Optifix-HW in position using adhesive when using steel formwork or even by nailing when using timber formwork. The concrete can now be poured. When the shuttering is removed, the brace can be attached using a self cutting galvanised screw M 12 x 70. Screws together with washers are supplied separately upon request. The resulting hole which remains in the concrete can be closed by matching caps.

Reference

Plate diameter

Length

Weight (kg/100)

Packing Qty

Optifix-HW 12 50 mm 60 mm 2,40 250 Screw M12 x 70 galvanised (DIN 571) 50 Washer M12 galvanised (DIN 9021) 50 Cap HW 12 0,90 100

Optifix plastic insert

A plastic cast-in socket, ideal for light duty fixings, such as seating rails to concrete. Total impermeability to water makes Optifix an economical alternative to stainless steel. Must not be used for lifting or transporting!

Reference

Thread

Length

Weight (kg/100)

Packing Qty

Optifix M 8 M 8 30 mm 0,33 500 Optifix M10 M10 37 mm 0,62 500 Optifix M12 M12 44 mm 0,98 500 Optifix M16 M16 58 mm 1,94 500 Plastic Bolt M10-55 M10 55 mm 0,55 500

Optifix Super DG 15 DG 15/17 4,10 500 Optifix 3/8" 3/8" NC 0,85 500 Optifix 1/2" 1/2" NC 1,40 500 Optifix 3/4" 3/4" NC 3,60 500 Optifix 3/4" C 3/4" Coil type 3,60 500


Liftfix spherical head lifting anchor system

Liftfix round head lifting anchors are installed in the formwork using semi spherical recess formers. On one hand the recess formers perform the role of holders, on the other they provide a recess, which accommodates the load bearing tackle (lifting eye). Thus it is impossible to mix up the load levels. A further advantage is that when under diagonal tension, the lifting eye rests against the concrete, thus directing the horizontal load component directly into the concrete. Therefore in the construction of components with a large surface area, a reduction in load as a consequence of diagonal tension such as is usual with sleeve type transport anchors does not apply. Additional reinforcement is not required. In thin wall sections, an additional reinforcement must be provided when diagonal tension is applied, to relieve the tensile splitting forces which occur. Appropriate details can be found in following pages.

Reference

D (mm)

D1 (mm)

D2 (mm)

S (mm)

Load rating

Liftfix anchor 1,3 10 19 25 10 1 300 kg Liftfix anchor 2,5 14 26 35 11 2 500 kg Liftfix anchor 5,0 20 36 50 15 5 000 kg Liftfix anchor 7,5 24 47 60 15 7 500 kg Liftfix anchor 10,0 28 47 70 15 10 000 kg Liftfix anchor 15,0 39 70 80 15 15 000 kg Liftfix anchor 20,0 39 70 98 15 20 000 kg Liftfix anchor 32,0 50 88 135 27 32 000 kg

Liftfix anchor

Liftfix complies to the BGR 106 safety regulations governing transport anchors and systems for precast concrete elements. Please request Seifert specialist literature on Liftfix lifting anchor systems for further details or download them from our internet site at www.seifert.de. Before use the cautionary notes on page 54 must be observed.

Reference

Load rating

Liftfix rubber recess former #1 1 300 kg Liftfix rubber recess former #2 2 500 kg Liftfix rubber recess former #3 5 000 kg Liftfix rubber recess former #4 7 500/10 000 kg Liftfix rubber recess former #5 15 000/20 000 kg Liftfix rubber recess former #6 32 000 kg

Liftfix rubber recess former

Reference

Load rating

Liftfix lifting eye #1 1 300 kg Liftfix lifting eye #2 2 500 kg Liftfix lifting eye #3 5 000 kg Liftfix lifting eye #4 7 500/10 000 kg Liftfix lifting eye #5 15 000/20 000 kg Liftfix lifting eye #6 32 000 kg

Liftfix lifting eye

Tilt-up System

Seifert possesses a complete range of items for the tilt up method of prefabrication and construction. Please contact us for further details and a free brochure including a comprehensive range of products.

Liftfix recess cover

A cover is available to seal the recess provided by the rubber former. The cover clamps onto the liftfix anchor and is simply hammered home. Reference

Suitable for load rating

Weight (kg/100)

Packing Qty

Liftfix recess cover #3 5,0 t. 5,50 100


Permissible loads in longitudinal and transversal direction

The design of the Confix system is in accordance with the requirements issued by the DBV (German Concrete Association) and DIN 1045. The concrete cover is guaranteed, after tearing off the outer face of Confix cases. The permissible loading is given in the following tables, when taking a concrete compressive strength of 25 N/mm² into consideration.

Reference

Shear load (longitudinal/transverse)

Single rail hook element S14, S18, S21 5 800 kg 58 kN Stirrup box element S32, S33, S34, S35 8 100 kg 81 kN Stirrup box element S36, S37, S38, S39, S40 11 800 kg 118 kN Stirrup box element S41, S42, S43, S44, S45 15 100 kg 151 kN Stirrup box element S46, S47, S48, S49, S50 16 900 kg 169 kN Stirrup box element S51, S52, S53, S54, S55 19 400 kg 194 kN

Confix System Continuity system for reinforced concrete components

The Seifert Confix continuity system is the ideal solution for joining reinforced concrete constructions, consisting of an initially closed protection box with one- or two-layer-stirrups. Confix is simply nailed to the formwork and cast into the component. After striking shuttering the face of the box will show and the protection box can be opened slightly. The connecting bars are released and can be easily raised. The protection box remains cast-in providing an excellent bond with surrounding concrete. Confix is suitable for both precast and insitu casting and can be used for wall thickness of 8 to 30 cm. They are easy to handle and fit.

There are various standard shapes available for a variety of requirements, but please note that we are able to manufacture the Confix System with alternative stirrup heights and spacing, bar diameters, shapes and box lengths.

The Confix System meets the requirements of DIN 1045 and the DBV notice “Re-bending of reinforcement steel”. They consist of high yield steel bars to BSt 500 S (IV S) according to DIN 488, housed in a galvanised steel case with a tear-off cover.

Reference

Case length

Case width

Element height

Stirrup Ø

Stirrup interval

Stirrup Qty

Lap length

Weight (kg/m)

Packing Qty

Confix S10 800 mm 46 mm 110 mm 8 mm 150 mm 5 290 mm 1,55 300 m Confix S11 800 mm 46 mm 130 mm 10 mm 150 mm 5 360 mm 2,63 300 m Confix S12 1 200 mm 46 mm 110 mm 8 mm 150 mm 8 290 mm 1,64 350 m Confix S13 1 200 mm 46 mm 130 mm 10 mm 150 mm 8 360 mm 2,52 350 m Confix S14 1 200 mm 55 mm 150 mm 8 mm 150 mm 8 290 mm 1,74 250 m Confix S15 1 200 mm 55 mm 150 mm 8 mm 200 mm 6 290 mm 1,41 250 m Confix S16 1 200 mm 55 mm 150 mm 8 mm 250 mm 5 290 mm 1,22 250 m Confix S17 1 200 mm 55 mm 150 mm 10 mm 100 mm 12 360 mm 4,39 200 m Confix S18 1 200 mm 55 mm 150 mm 10 mm 150 mm 8 360 mm 2,75 250 m Confix S19 1 200 mm 55 mm 150 mm 10 mm 200 mm 6 360 mm 2,16 250 m Confix S20 1 200 mm 55 mm 170 mm 12 mm 100 mm 12 430 mm 6,95 150 m Confix S21 1 200 mm 55 mm 170 mm 12 mm 150 mm 8 430 mm 4,44 200 m

Confix single rail hook element

Reference

Case width

Stirrup Ø

Stirrup width

Stirrup interval

Stirrup Qty

Lap length

Max. wall thickness

Weight (kg/m)

Packing Qty

Confix S32 85 mm 8 mm 60 mm 150 mm 8 290 mm 140 mm 3,04 200 m Confix S33 85 mm 8 mm 60 mm 200 mm 6 290 mm 140 mm 2,43 200 m Confix S34 85 mm 10 mm 60 mm 150 mm 8 360 mm 140 mm 4,99 200 m Confix S35 85 mm 10 mm 60 mm 200 mm 6 360 mm 140 mm 3,88 200 m Confix S36 115 mm 8 mm 90 mm 150 mm 8 290 mm 180 mm 3,33 150 m Confix S37 115 mm 8 mm 90 mm 200 mm 6 290 mm 180 mm 2,69 150 m Confix S38 115 mm 10 mm 90 mm 150 mm 8 360 mm 180 mm 5,25 150 m Confix S39 115 mm 10 mm 90 mm 200 mm 6 360 mm 180 mm 4,12 150 m Confix S40 115 mm 12 mm 90 mm 150 mm 8 430 mm 180 mm 8,45 125 m Confix S41 145 mm 8 mm 120 mm 150 mm 8 290 mm 220 mm 3,53 150 m Confix S42 145 mm 8 mm 120 mm 200 mm 6 290 mm 220 mm 2,94 150 m Confix S43 145 mm 10 mm 120 mm 150 mm 8 360 mm 220 mm 5,77 150 m Confix S44 145 mm 10 mm 120 mm 200 mm 6 360 mm 220 mm 4,67 150 m Confix S45 145 mm 12 mm 120 mm 150 mm 8 430 mm 220 mm 8,68 125 m Confix S46 165 mm 8 mm 140 mm 150 mm 8 290 mm 240 mm 3,47 125 m Confix S47 165 mm 8 mm 140 mm 200 mm 6 290 mm 240 mm 2,81 125 m Confix S48 165 mm 10 mm 140 mm 150 mm 8 360 mm 240 mm 5,44 125 m Confix S49 165 mm 10 mm 140 mm 200 mm 6 360 mm 240 mm 4,27 125 m Confix S50 165 mm 12 mm 140 mm 150 mm 8 430 mm 240 mm 8,77 125 m Confix S51 185 mm 8 mm 160 mm 150 mm 8 290 mm 260 mm 3,87 125 m Confix S52 185 mm 8 mm 160 mm 200 mm 6 290 mm 260 mm 3,26 125 m Confix S53 185 mm 10 mm 160 mm 150 mm 8 360 mm 260 mm 5,68 125 m Confix S54 185 mm 10 mm 160 mm 200 mm 6 360 mm 260 mm 5,03 125 m Confix S55 185 mm 12 mm 160 mm 150 mm 8 430 mm 260 mm 9,15 125 m

Confix stirrup box element

Confix stirrup element where double stirrups are housed in a galvanised steel box. Case length 1 200 mm. Element height 170 mm for stirrup Ø12 mm, and height 150 mm for Ø10 mm and Ø8 mm.


Railfix

The railfix-system is a flexible and effective method to attach various items to precast concrete units, including water pipes, cable channels, air ducts and many similar applications. The cold pressed hot dip galvanised profile 28/15 and 38/17 covers a large amount of all typical needs. Railfix is to be mainly used for idle loads only. Railfix is a hollow profile that is filled with polyethylene foam to prevent concrete running into the open section during pouring. The foam can be easily removed with the help of a screwdriver or similar after the formwork has been removed. All edge spacings (edge to first anchor) are 25 mm.

Reference

Rail length

No. anchors

Anchor spacing

Weight (kg/m)

Packing Qty

Railfix 28/15 6 000 mm 25 250 mm 1,25 50 pcs Railfix 28/15 100 100 mm 2 50 mm 1,25 1 000 pcs Railfix 28/15 150 150 mm 2 100 mm 1,25 1 000 pcs Railfix 28/15 200 200 mm 2 150 mm 1,25 1 000 pcs Railfix 28/15 250 250 mm 2 200 mm 1,25 1 000 pcs Railfix 28/15 300 300 mm 2 250 mm 1,25 1 000 pcs Railfix 38/17 6 000 mm 25 250 mm 2,00 25 pcs Railfix 38/17 100 100 mm 2 50 mm 2,00 1 000 pcs Railfix 38/17 150 150 mm 2 100 mm 2,00 1 000 pcs Railfix 38/17 200 200 mm 2 150 mm 2,00 1 000 pcs Railfix 38/17 250 250 mm 2 200 mm 2,00 1 000 pcs Railfix 38/17 300 300 mm 2 250 mm 2,00 1 000 pcs Railfix 40/22 6 000 mm 25 250 mm 2,24 25 pcs Railfix 40/22 100 100 mm 2 50 mm 2,24 1 000 pcs Railfix 40/22 150 150 mm 2 100 mm 2,24 1 000 pcs Railfix 40/22 200 200 mm 2 150 mm 2,24 1 000 pcs Railfix 40/22 250 250 mm 2 200 mm 2,24 1 000 pcs Railfix 40/22 300 300 mm 2 250 mm 2,24 1 000 pcs

Railfix accessories

Matching hammerhead mounting bolts (Railfix mounting bolt) can be supplied for the application of components to be attached to the anchor rail. Available in varying dimensions, from M6 to M16 and in lengths of 15 mm up to 200 mm. Railfix mounting bolts are supplied with matching nuts. Matching washers in sizes from M6 to M16 can also be supplied upon request. All mounting bolts, nuts and washers are galvanised. Reference

Available bolt sizes:

Packing Qty

Railfix 28/15 M6 M 8 M10 M12 100 Railfix 38/17 M10 M12 M16 100 Railfix 40/22 M10 M12 M16 100

Other versions and custom lengths are available on request. Please contact us to receive a specific quotation.

Waterstop and sealant 32

Jointfix centrally and externally placed waterstops

The Seifert range of centrally and externally placed Jointfix PVC waterstops are designed to provide an integral sealing network for joints in water retaining, and water excluding concrete structures. The range is supplied as straight lengths of 25 m in coils with separate intersection pieces to be joined on site. Where necessary factory made fabrications can be supplied to simplify site assembly of the complete waterstop network. Seifert waterstops are designed to provide the sealing of movement and construction joints which occur in water retaining types of concrete structure such as reservoirs, water towers, sewage tanks, dams, culverts, canals, spillways, swimming pools and bounded areas surrounding liquid retaining tanks, as well as in water excluding concrete structures such as basement structures and underground car parks, tunnels and subways, abutments and retaining walls as well as on roof decks and podium areas.

Centrally placed Seifert waterstop profiles

The concept is to provide a water barrier across all joints in concrete structures by casting the section centrally into the edges of adjacent concrete components. They are suitable for use in most water retaining and water excluding structures, being capable of withstanding water pressure from either the internal or external face.

Plain web sections for use in construction and contraction joints: Reference

Size 'a'

Size 'b'

Size 'c'

Size 'd'

Weight (kg/m)

Jointfix 120 110 mm 25 mm 3,0 mm 2,5 mm 0,60 Jointfix 150 150 mm 45 mm 3,0 mm 2,5 mm 0,75 Jointfix 200 190 mm 70 mm 3,0 mm 2,5 mm 0,90 Jointfix 240 240 mm 80 mm 3,5 mm 2,5 mm 1,20 Jointfix 320 320 mm 100 mm 4,5 mm 3,0 mm 1,80

Reference

Size 'a'

Size 'b'

Size 'c'

Size 'd'

Weight (kg/m)

Jointfix E150 150 mm 50 mm 3,5 mm 2,5 mm 0,90 Jointfix E200 190 mm 65 mm 3,5 mm 2,5 mm 1,15 Jointfix E240 240 mm 80 mm 4,0 mm 3,0 mm 1,50 Jointfix E320 320 mm 110 mm 5,0 mm 3,5 mm 2,30 Jointfix E350 350 mm 110 mm 5,0 mm 3,5 mm 2,40

Centre bulb sections for use in expansion or contraction joints:

Externally placed Seifert waterstop profiles

Designed for use in basement, foundation and floor slab construction in both horizontal and vertical joints. The specially designed bulbs allow ease of concrete compaction, provide a secure anchorage in the concrete and a positive water barrier.

Reference

No. anchors

Size 'a'

Size 'b'

Size 'c'

Size 'f'

Weight (kg/m)

Jointfix A200 4 190 mm 66 mm 4 mm 15 mm 1,25 Jointfix A250 4 240 mm 90 mm 4 mm 20 mm 1,60 Jointfix A320 6 330 mm 105 mm 4 mm 20 mm 2,30

Plain web sections for use in construction and contraction joints:

Reference

No. anchors

Size 'a'

Size 'b'

Size 'c'

Size 'f'

Weight (kg/m)

Jointfix A200E 4 190 mm 92 mm 4 mm 17 mm 1,45 Jointfix A250E 4 240 mm 90 mm 4 mm 20 mm 1,80 Jointfix A320E 6 330 mm 105 mm 4 mm 20 mm 2,50

Sections incorporate a flat top centre box to accommodate movement in expansion joints and to provide a seating to support the joint filler:

Specialist literature detailing accessories such as fixing clamps, intersection pieces and heat welding equipment is available on request. Please contact us to obtain a free copy.

Waterstop and sealant 33

Hydrofix expanding waterstop

Hydrofix is a unique neoprene rubber waterstop used in the construction industry. Hydrofix provides safe and efficient sealing of joints in insitu and precast applications. Ideal for all water retaining structures, as Hydrofix has delayed swelling characteristics, does not disintegrate, retains it's shape and stays stable and seals efficiently up to 7 bar water pressure. Hydrofix is incorporated into the joint prior to concreting. After concrete has set, the reduction of volume may make joints untight. When water penetrates into those joints, Hydrofix expands it's volume in proportion to the absorbed amount of water, thus safely and efficiently sealing the joint. The peak expansion is limited to 200% on average. The resulting pressure is limited due to the closed cell structure of Neoprene rubber, thus avoiding any damage to concrete units. In dry surroundings, swollen waterstops release the water and reduce their volume to initial size. The amount of water in the section remains however on same level as in surrounding concrete, thus assuring that the waterstop stays swollen and active. When again in contact with water, Hydrofix starts to swell again.

Reference

Size

Packing Qty

Hydrofix 18/08 18 x 8 x 6 000 mm 60 m Hydrofix 20/15 20 x 15 x 6 000 mm 30 m Hydrofix-adhesive 310 ml 12

Isofix grout check foam

A partially closed-cell Polyurethane grout-check foam tape. Coated on one face with a pressure-sensitive adhesive. Other dimensions are available on request. Reference

Size

Packing Qty

Isofix 5 x 20 mm 50 m

Backup rods

Extruded, closed cell polyethylene back-up rod. Light and durable foam with shock absorbing and heat insulating properties. Back-up rods are designed as non-absorbent low density joint filler, suitable as a resilient backfill, which can be used in various sealing applications. Reference

Diameter

Backup rod 6 6 mm Backup rod 10 10 mm Backup rod 12 12 mm Backup rod 15 15 mm Backup rod 20 20 mm Backup rod 25 25 mm Backup rod 30 30 mm Backup rod 35 35 mm Backup rod 40 40 mm Backup rod 50 50 mm

Formwork accessories 34

Form Tie rods

The safe way to tie wall formwork. Seifert form tie rods have been specially developed for reinforced concrete and tying applications, offering an economical solution where threaded joints with nuts or couplers are required. Form tie rods are threaded along their entire length. Available with either flat hot rolled intermediate or cold rolled continuous thread. The thread form is a right hand thread, with a coarse pitch that is robust, self-cleaning and allows easy assembly on site. Form tie rods are available with a galvanised or black finish. Stock lengths of 6,0 m. Intermediate sizes are available on request. Packed in 25 rods per bundle. Also available with 20/23 or 26/30 thread.

Reference

Thread type

Quality

Working load * (kN)

Weight (kg/m)

Packing Qty

Form Tie rod DG 15/17 hot rolled, intermediate non weldable 90,0 1,44 25 Form Tie rod DG 15/17 hot rolled intermediate weldable 90,0 1,44 25 Form Tie rod DG 15/17 cold rolled, continuous weldable 85,0 1,50 25

* Working load according to DIN 18 216

Plate rib washers/Counter plates

Reinforced counter plates made from high quality steel St37, to accommodate tie rods DG 15/17. To be used with wing nuts or hexagon nuts. For use in both timber and steel formwork. Hot-dip-galvanised. Reference

Size

Thickness

Packing Qty

Plate-rib-washer 120/120 120 x 120 mm 8 mm 50 Counter plate 14/7 140 x 70 mm 8 mm 25

Water barriers with disc

As above but with disc for water tight ties, made from high quality cast iron, to accommodate tie rods DG 15/17. Overall length 116 mm. Plastic couplers are also available. Reference

Thread

Length

Weight (kg/100)

Packing Qty

Water barrier DG15 disc DG 15/17 ~ 116 mm 54,4 50 Coupler SW30 0,85 100

Water barriers

For water tight ties, made from high quality cast iron, to accommodate tie rods DG 15/17. Overall length 116 mm. Suitable for typical tie bar system application with water barrier, thruty sleeve over tie bolt, plastic connectors and cones used at the ends of the thruty sleeve. Plastic couplers to connect water barrier with thruty sleeves 22 mm inner diameter, preventing the entry of foreign matter and thus ensuring a clean thread are available on request.

Reference

Thread

Length

Weight (kg/100)

Packing Qty

Water barrier DG15 DG 15/17 ~ 116 mm 85,0 50 Coupler R30 0,60 100

Formwork accessories 35

Formwork clamps with reliable self locking wedge system

Formwork clamps 4-10 consist of 2 parts, a cast iron body and a steel wedge. They are easy to use, as fixing can be carried out with just a hammer. The tensioning tool allows safe tensioning of the wire. A universal tensioning tool for both spring- and formwork clamps is available.

Reference

for steel Ø

Weight (kg/100)

Packing Qty

Formwork clamp 4 - 10 mm 35,70 50 Universal tensioning tool 1

Spring clamps

Spring clamps are used with mild steel rods and provide a cheap, effective clamping system that has no nuts or bolts and leaves no expensive ties in the concrete. Suitable for both timber and steel formwork. Spring clamps are easy to use. Fixing and self-locking is effected by means of reliable spring system and with a tensioning tool. For correct use, a distance of at least 400 mm between two clamps is recommended. Spring clamps are manufactured from high quality steel, all parts are galvanised to protect against corrosion.

Reference

for steel Ø

Weight (kg/100)

Packing Qty

Spring clamp 4 - 10 mm 41,50 50 Universal tensioning tool 1

Anchor nuts

Anchor nuts with two wings, made from high quality cast iron to accommodate tie rods DG 15/17. For use without counter plates in both timber and steel formwork. Hot-dip galvanised. Diameter 70 mm or 100 mm. Reference

Thread

Plate Diameter

Weight (kg/100)

Packing Qty

Anchor nut DG 15 70 mm DG 15/17 70 mm 24,6 25 Anchor nut DG 15 100 mm DG 15/17 100 mm 59,5 25

Wing nuts

Wing nuts with either one or two wings, made from high quality cast iron, to accommodate tie rods DG 15/17. For use in both timber and steel formwork with plate rib washers. Hot dip galvanised or dyed. Reference

Thread

Weight (kg/100)

Packing Qty

Wing nut DG 15 one wing DG 15/17 galvanised 30,5 100 Wing nut DG 15 two wing DG 15/17 galvanised 35,7 100

Hexagon nuts

Hexagon nuts for use with tie rods DG 15. For use in both timber and steel formwork with plate rib washers, or to be used as bar connector. Galvanised and black finish available. Weldable quality on request. Length 30 mm or 50 mm. Other thread sizes available on request.

Reference

Thread

Length

Weight (kg/100)

Packing Qty

Hexagon nut DG 15 30/30 DG 15/17 30 mm 12,7 250 Hexagon nut DG 15 30/50 DG 15/17 50 mm 21,2 100

Wall spacers 36

Thruty sleeve

Rigid PVC tube, supplied in lengths of 2 m, which can be easily cut to size on site. To be used as an expandable sleeve over tie rods, facilitating their removal and also acting as a spacer to give correct shutter position. Other lengths are available on request.

Reference

Surface

Inner diameter

Outer Diameter

Length

Weight (kg/100 m)

Packing Qty

Thruty sleeve 14/19 smooth 14 mm 19 mm 2 000 mm 16,20 100 m Thruty sleeve 18/24 smooth 18 mm 24 mm 2 000 mm 24,95 50 m Thruty sleeve 20/24 rough 20 mm 24 mm 2 000 mm 18,40 100 m Thruty sleeve 20/26 rough 20 mm 26 mm 2 000 mm 26,20 50 m Thruty sleeve 22/26 rough 22 mm 26 mm 2 000 mm 18,50 100 m Thruty sleeve 22/28 rough 22 mm 28 mm 2 000 mm 29,60 50 m Thruty sleeve 26/30 smooth 26 mm 30 mm 2 000 mm 21,00 50 m Thruty sleeve 26/32 smooth 26 mm 32 mm 2 000 mm 34,60 50 m Thruty sleeve 30/36 rough 30 mm 36 mm 2 000 mm 39,85 50 m Thruty sleeve 32/38 rough 32 mm 38 mm 2 000 mm 38,15 50 m Thruty sleeve 37/40 smooth 35 mm 38 mm 2 400 mm 27,55 60 m Thruty sleeve 40/46 smooth 40 mm 46 mm 2 000 mm 48,00 30 m

Thruty cones

Thruty cones are used at the ends of thruty sleeves and can be easily extracted after removal of the formwork, to form a chamfered recess for subsequent grouting. Reference

for sleeve inner Ø

Recess depth

Weight (kg/100)

Packing Qty

Thruty cone SK 14 14 mm 10 mm 0,40 1 000 Thruty cone SK 20 20 mm 10 mm 0,60 1 000 Thruty cone SK 22 22 mm 10 mm 0,52 1 000 Thruty cone SK 26 26 mm 10 mm 0,72 500 Thruty cone SK 30 30 mm 10 mm 0,75 500 Thruty cone SK 32 32 mm 10 mm 0,78 500 Thruty cone SK 40 40 mm 10 mm 2,52 500

Thruty cones with deeper recess

Cones for thruty sleeves, with different heights to form a deeper chamfered recess for subsequent grouting. Thruty cones 22/3 and 22/5 are in particular suitable to obtain watertight joints (working instructions are available on request). Extraction tools for thruty cones also available on request.

Reference

for sleeve inner Ø

Recess depth

Weight (kg/100)

Packing Qty

Thruty cone 22/2 22 mm 20 mm 0,99 1 000 Thruty cone 22/3 22 mm 30 mm 1,06 1 000 Thruty cone 22/5 22 mm 50 mm 2,40 500 Thruty cone 22/5-S 22 mm 50 mm Spiral type 2,50 500 Thruty cone 26/5 26 mm 50 mm 2,85 500 Thruty cone 32/3 32 mm 30 mm 2,30 250

Plastic stops

Plastic plugs for filling redundant holes and closing thruty sleeves. Intermediate sizes on request. Reference

for sleeve inner Ø

Weight (kg/100)

Packing Qty

Stopper 9 9 mm 0,07 1 000 Stopper 10 10 mm 0,08 1 000 Stopper 13 13 mm 0,09 1 000 Stopper 14 14 mm 0,13 1 000 Stopper 18 18 mm 0,24 1 000 Stopper 20 solid 20 mm 0,45 1 000 Stopper 20 20 mm 0,26 1 000 Stopper 22 solid 22 mm 0,48 1 000 Stopper 22 22 mm 0,29 1 000 Stopper 26 26 mm 0,40 1 000 Stopper 28 28 mm 0,43 500 Stopper 30 30 mm 0,45 500 Stopper 32 32 mm 0,60 500 Stopper 40 40 mm 0,91 500

Wall spacers 37

Push-on cap

End-cap for thruty sleeve 22/26 mm. With larger pressure plate and waterstop grooves. Reference

for sleeve Ø

Weight (kg/100)

Packing Qty

Stuelpfix-cap 22/26 mm 1,00 1 000 Stuelpfix-stopper 22/26 mm 0,40 1 000

Aquafix

Aquafix is a stopper made in a variety of sizes from resilient material (non-biodegradable). It is widely used in reservoirs and sewage treatment works and as a backing where grouting is necessary. Reference

for sleeve inner Ø

Weight (kg/100)

Packing Qty

Aquafix 20 20 mm 0,44 1 000 Aquafix 22 22 mm 0,61 1 000 Aquafix 26 26 mm 0,87 500 Aquafix 32 32 mm 1,48 500

Sperrfix end-cap Sperrfix end cap with larger pressure plate and waterstop grooves for thruty sleeves. Ensures a clean finish for sloping formwork. Sperrfix stoppers for closing flush.

Reference

for sleeve Ø

Weight (kg/100)

Packing Qty

Sperrfix-cap #1 20/26 mm 0,63 1 000 Sperrfix-cap #2 22/26 mm 0,72 1 000 Sperrfix-cap #3 22/28 mm 0,75 1 000 Sperrfix-cap #4 26/30 mm 1,06 1 000 Sperrfix-cap #5 32/38 mm 1,34 1 000 Sperrfix-stopper #1 20/26 mm 0,30 1 000 Sperrfix-stopper #2 22/26 mm & 22/28 mm 0,35 1 000 Sperrfix-stopper #4 26/30 mm 0,37 1 000 Sperrfix-stopper #5 32/38 mm 0,66 1 000

Conterfix

Solid plastic cone as thruty sleeve for concrete walls. Inner diameter 26 mm. High compression resistance. Can be extracted for multiple use. Concrete cones and removal tools are also available on request.

Reference

for wall thickness

Weight (kg/100)

Packing Qty

Conterfix-Super 150 green 150 mm 19,20 50 Conterfix-Super 160 blue 160 mm 20,20 50 Conterfix-Super 170 yellow 170 mm 21,00 50 Conterfix-Super 180 white 180 mm 23,50 50 Conterfix-Super 200 red 200 mm 24,60 50 Conterfix-Super 250 250 mm 31,50 50

Wandfix wall-spacer

Wall spacer made from rigid PVC tube with wide contact surface to formwork. Inner diameter 22 mm. Avoids time consuming work on site. Suitable for Sperrfix-stopper #2. Other lengths are available on request. Wandfix with inner diameter 26 mm also available on request. Stoppers available separately.

Reference

For wall thickness

Weight (kg/100)

Packing Qty

Wandfix 15 150 mm 4,20 250 Wandfix 18 180 mm 4,60 250 Wandfix 20 200 mm 5,00 250 Wandfix 24 240 mm 5,60 100 Wandfix 25 250 mm 6,00 100 Wandfix 30 300 mm 7,00 100 Wandfix 36 360 mm 8,00 100

Wall spacers 38

Schalfix “round”

Sturdy plastic spacer for formwork board adjustment at wall base. Simply nail to the formwork. Schalfix “round” #1 has several nailing holes for fixing off-centre, thus assuring exact adjustment when the spacer is turned. Schalfix “round” #2 has a preformed nailing hole in it's centre, and is available with a pre-installed nail on request.

Reference

Height

Diameter

Packing Qty

Schalfix 'round' #1 30 mm 41 mm 100 Schalfix 'round' #2 30 mm 48 mm 100

Schalfix-U

Very sturdy U-shaped plastic wall spacer with nail holes in regular intervals for on-site cutting. For adjusting formwork boards at the base of the wall. Custom lengths are available on request.

Reference

Width

Height

Length

Weight (kg/100 m)

Packing Qty

Schalfix-U 50 mm 30 mm 2 000 mm 49,00 20 m

Vertifix

Wall spacer made from hard drawn wire for clamping onto single layer reinforcement. Tight fitting plastic feet on both ends. Off-centre designs and sizes for other wall widths are available on request. Please advise desired wall thickness and concrete cover in your purchase order.

Reference

For wall thickness

Weight (kg/100)

Packing Qty

Vertifix 80 80 mm 2,87 1 000 Vertifix 100 100 mm 3,02 1 000 Vertifix 120 120 mm 3,20 1 000 Vertifix 150 150 mm 5,24 500 Vertifix 180 180 mm 5,30 500 Vertifix 200 200 mm 5,61 500 Vertifix 250 250 mm 6,12 500 Vertifix 300 300 mm 6,72 500

Hollow wall anchor

Special anchor for the production and subsequent lifting of precast concrete hollow walls. The element strength is reinforced in addition to the added lifting facility offered by this anchor. Reference

For wall thickness

Width

Length

Weight (kg/100)

Packing Qty

Hollow wall anchor 180 S 180 mm 110 mm 580 mm 150,00 100 Hollow wall anchor 200 S 200 mm 130 mm 580 mm 160,00 100 Hollow wall anchor 240 S 240 mm 170 mm 580 mm 180,00 100 Hollow wall anchor 250 S 250 mm 180 mm 580 mm 190,00 100 Hollow wall anchor 300 S 300 mm 230 mm 580 mm 200,00 100 Hollow wall anchor 350 S 350 mm 280 mm 580 mm 210,00 100 Hollow wall anchor 360 S 360 mm 290 mm 580 mm 220,00 100 Hollow wall anchor 400 S 400 mm 330 mm 580 mm 240,00 100

Schalfix-K

Spacer to give correct shutter position at the wall base. Injection moulded spacer, with nail holes for fixing. Reference

For wall thickness

Weight (kg/100)

Packing Qty

Schalfix-K 150 150 mm 5,60 100 Schalfix-K 160 160 mm 5,70 100 Schalfix-K 180 180 mm 6,10 100 Schalfix-K 200 200 mm 6,40 100 Schalfix-K 240 240 mm 6,70 100 Schalfix-K 250 250 mm 6,90 100

Wall spacers 39

Duofix

Stable wall spacer for vertical formwork which ensures distance between reinforcement and formwork. Neither bending of S-hooks, nor need for spacers or tying wire. Over 50% saving compared with conventional methods. Exact dimensions at low cost. Clamping 90° off-set for size 60/10. Other sizes on request.

Extract from DIN 1045 - 25.5.5.2, reinforced walls (page 81): “S-hooks may be omitted when use of supporting rods with max. Ø 14 mm and concrete cover at least 2 x rebar diameter.” Example: Mesh reinforcement Q377 (377 mm²/m²), rebar Ø 8,5 mm x 2 = 17 mm. All Clipfix and Duofix with concrete cover of at least 20 mm fulfil the requirements of DIN 1045 in this case. (Remark: according to DIN 1045, table 10, the minimum nominal size is a concrete cover of 20 mm).

Reference

For wall thickness

Concrete cover

For steel diameter

Weight (kg/100)

Packing Qty

Duofix 60/10 60 mm 10 mm 4 - 8 mm 0,30 1 000 Duofix 80/15 80 mm 15 mm 4 - 8 mm 0,70 1 000 Duofix 90/15 90 mm 15 mm 4 - 8 mm 0,75 1 000 Duofix 100/15 100 mm 15 mm 4 - 8 mm 0,80 1 000 Duofix 100/20 100 mm 20 mm 4 - 8 mm 0,80 1 000 Duofix 100/25 100 mm 25 mm 4 - 8 mm 0,80 1 000 Duofix 115/25 115 mm 25 mm 4 - 8 mm 0,99 1 000 Duofix 120/15 120 mm 15 mm 4 - 8 mm 0,90 1 000 Duofix 120/30 120 mm 30 mm 4 - 8 mm 1,00 1 000 Duofix 140/15 140 mm 15 mm 4 - 8 mm 1,00 500 Duofix 140/25 140 mm 25 mm 4 - 8 mm 1,20 500 Duofix 150/20 150 mm 20 mm 4 - 8 mm 1,05 500 Duofix 150/25 150 mm 25 mm 4 - 8 mm 1,06 500 Duofix 150/40 150 mm 40 mm 4 - 8 mm 1,07 500 Duofix 180/20 180 mm 20 mm 4 - 8 mm 1,80 500 Duofix 180/30 180 mm 30 mm 4 - 8 mm 1,80 500 Duofix 200/20 200 mm 20 mm 4 - 8 mm 2,20 250 Duofix 240/25 240 mm 25 mm 4 - 8 mm 2,30 250 Duofix 250/30 250 mm 30 mm 4 - 8 mm 2,40 250 Duofix 300/30 300 mm 30 mm 4 - 8 mm 2,80 250

* Please note that these sizes are not stock items. Minimum order quantity is 5 000 pcs otherwise a set-up charge may be necessary.

Clipfix wall spacers

Stable mat connector made from Ø 4 mm steel with two plastic clamps fitted. Maintains distance between mats and formwork. Can be used instead of S-hooks (see DIN 1045). Clipfix for other wall sizes and concrete covers of 35 mm, 40 mm, 45 mm and 50 mm are available on request.

Extract from DIN 1045 - 25.5.5.2, reinforced walls (page 81): “S-hooks may be omitted when use of supporting rods with max. Ø 14 mm and concrete cover at least 2 x rebar diameter.” Example: Mesh reinforcement Q377 (377 mm²/m²), rebar Ø 8,5 mm x 2 = 17 mm. All Clipfix and Duofix with concrete cover of at least 20 mm fulfil the requirements of DIN 1045 in this case. (Remark: according to DIN 1045, table 10, the minimum nominal size is a concrete cover of 20 mm).

Reference

For wall thickness

Concrete cover

For steel diameter

Packing Qty

Clipfix 12/20 * 120 mm 20 mm 4 - 12 mm 1 000 Clipfix 12/25 * 120 mm 25 mm 4 - 12 mm 1 000 Clipfix 12/30 * 120 mm 30 mm 4 - 12 mm 1 000 Clipfix 15/20 150 mm 20 mm 4 - 12 mm 1 000 Clipfix 15/25 150 mm 25 mm 4 - 12 mm 1 000 Clipfix 15/30 150 mm 30 mm 4 - 12 mm 1 000 Clipfix 20/20 200 mm 20 mm 4 - 12 mm 1 000 Clipfix 20/25 200 mm 25 mm 4 - 12 mm 1 000 Clipfix 20/30 200 mm 30 mm 4 - 12 mm 1 000 Clipfix 25/20 250 mm 20 mm 4 - 12 mm 500 Clipfix 25/25 250 mm 25 mm 4 - 12 mm 500 Clipfix 25/30 250 mm 30 mm 4 - 12 mm 500 Clipfix 30/20 300 mm 20 mm 4 - 12 mm 500 Clipfix 30/25 300 mm 25 mm 4 - 12 mm 500 Clipfix 30/30 300 mm 30 mm 4 - 12 mm 500 Clipfix 36/20 360 mm 20 mm 4 - 12 mm 500 Clipfix 36/25 360 mm 25 mm 4 - 12 mm 500 Clipfix 36/30 360 mm 30 mm 4 - 12 mm 500

Compared with traditional methods, Clipfix offers many advantages as there is no need for customised S-hooks tied to reinforcement, wall spacer and spacers for vertical rebars. Clipfix is time and labour saving as it acts as a mat connector, wall spacer and rebar spacer simultaneously.

Wall spacers 40

Hollow wall spacer

Special spacer for the production of precast concrete cavity walls. The hollow wall spacer consists of two reinforcement bars Ø 10 mm, welded together. Two sturdy plastic caps fitted prevent any danger of rust staining or damage to formwork. Other sizes are available on request.

Reference

For wall thickness

Weight (kg/100)

Packing Qty

Hollow wall spacer 14 140 mm 11,8 100 Hollow wall spacer 16 160 mm 13,0 100 Hollow wall spacer 18 180 mm 14,2 100 Hollow wall spacer 20 200 mm 15,5 100 Hollow wall spacer 24 240 mm 17,9 100 Hollow wall spacer 25 250 mm 15,6 100 Hollow wall spacer 30 300 mm 21,6 100 Hollow wall spacer 36 360 mm 25,3 100

Hollow wall spacer - Rocketfix

Special spacer for the production of precast concrete cavity walls, with a cleverly designed foot which provides a sturdy seating and accommodation of steel reinforcement up to diameter 14 mm for concrete cover from 15 mm to 30 mm when placed into the formwork.

The distinct advantage that this spacer offers is the crossbar on the “Rocketfix-T” version. The crossbar prevents the spacer from slipping through the not yet cured concrete of the first mould when it is turned to accommodate the second mould. Also available without crossbar.

Rocketfix-T 140 with crossbar 140 mm 6,85 100 Rocketfix-T 150 with crossbar 150 mm 7,25 100 Rocketfix-T 160 with crossbar 160 mm 7,65 100 Rocketfix-T 180 with crossbar 180 mm 8,40 100 Rocketfix-T 200 with crossbar 200 mm 9,15 100 Rocketfix-T 240 with crossbar 240 mm 10,70 100 Rocketfix-T 250 with crossbar 250 mm 11,10 100 Rocketfix-T 300 with crossbar 300 mm 11,45 100 Rocketfix-T 350 with crossbar 350 mm 14,90 100 Rocketfix-T 360 with crossbar 360 mm 15,30 100 Rocketfix-T 400 with crossbar 400 mm 16,80 100

Reference

For wall thickness

Weight (kg/100)

Packing Qty

Rocketfix 140 without crossbar 140 mm 5,55 100 Rocketfix 150 without crossbar 150 mm 5,95 100 Rocketfix 160 without crossbar 160 mm 6,30 100 Rocketfix 180 without crossbar 180 mm 7,05 100 Rocketfix 200 without crossbar 200 mm 7,85 100 Rocketfix 240 without crossbar 240 mm 9,35 100 Rocketfix 250 without crossbar 250 mm 9,75 100 Rocketfix 300 without crossbar 300 mm 10,15 100 Rocketfix 350 without crossbar 350 mm 13,60 100 Rocketfix 360 without crossbar 360 mm 13,95 100 Rocketfix 400 without crossbar 400 mm 15,50 100

Magnetic products 41

Magnetic square block

Solid plastic block in steel frame for fixing shuttering to form recess in precast concrete units (e.g. window access). Easy assembly on steel mould with cast-in magnets. Equipped with screw, handle and lever for removal. Adhesive force (axial lift) 350 kg/3 500 N.

Reference

Height

Width

Length

Weight (kg/pc)

Packing Qty

Magnetic block 100 mm 150 mm 150 mm 4,50 1

Magnetic rod

Sturdy reusable plastic profile with cast-in magnets for forming blank spaces in ceilings (floor beams). With chamfered edges for obtaining corner moulds. Reference

Height

Width

Length

Weight (kg/pc)

Packing Qty

Magnetic rod 75/58-250 75 mm 58 mm 250 mm 2,30 1 Magnetic rod 75/58-500 75 mm 58 mm 500 mm 4,70 1

Magnetic chamfer

Plastic chamfer with cast-in magnets on both sides. Also available in 1 250 mm lengths. Reference

Chamfer width

Hypotenuse

Length

Weight (kg/m)

Packing Qty

Magnetic chamfer 15 15 mm 20 mm 1 000 mm 0,50 1 Magnetic chamfer 20 20 mm 27 mm 1 000 mm 0,60 1 Magnetic chamfer 25 25 mm 35 mm 1 000 mm 0,70 1 Magnetic chamfer 30 30 mm 40 mm 1 000 mm 0,90 1

Magnetic profile

Plastic profile with galvanised sheet cover and round edges. Cast-in magnet on base. Also available in 1 250 mm lengths. Reference

Base

Side

Length

Weight (kg/m)

Packing Qty

Magnetic profile 27/100 27 mm 20 mm 1 000 mm 3,0 1 Magnetic profile 35/100 35 mm 25 mm 1 000 mm 3,5 1 Magnetic profile 40/100 40 mm 30 mm 1 000 mm 3,7 1

Magnetic plate for fixing dowels

Simply place onto steel formwork and screw the dowel onto the stud. The plate can be removed with a special tool (also available) after removing the formwork. Leaves the insert in a 15 mm deep tapered recess. The magnetic core is fully enclosed. Made from solid steel. Thread diameters from M10 through to M36 available. Other sizes including 11 mm plate height available on request.

Reference

Pull strength

Plate base diameter

Plate height

Packing Qty

Magnetic plate 105 105 kp 54 mm 15 mm 10 Magnetic plate 190 190 kp 69 mm 15 mm 10

Chamfers and construction profiles 42

PVC chamfers for precasters

Having no hollow section, PVC Chamfer Super has enormous strength and durability. Precasters particularly value its long life and reusability. The nailing flange provides easy fixing to corner moulds and thus safe stripping. Other lengths are available on request.

Reference

Size 'A'

Size 'B'

Size 'C'

Size 'D'

Length

Weight (kg/100 m)

Packing Qty

PVC Chamfer Super 6 6 mm 8 mm 15 mm 1,5 mm 250 cm 6,50 100 m PVC Chamfer Super 11 11 mm 15 mm 27 mm 3,5 mm 250 cm 9,80 100 m PVC Chamfer Super 15 15 mm 21 mm 36 mm 4,0 mm 250 cm 13,30 50 m PVC Chamfer Super 6 BN 6 mm 8 mm 25 mm 1,5 mm 250 cm 6,85 100 m PVC Chamfer Super 6 PE 6 mm 8 mm 15 mm 1,5 mm 250 cm 6,50 100 m PVC Chamfer Super 11 PE 11 mm 15 mm 27 mm 3,5 mm 250 cm 9,80 100 m

PVC Chamfers

PVC profiles suitable for forming chamfered corners to columns and beams, and features such as those on expansion joints on walls. Chamfers are thick walled extrusions of impact strength PVC. Re-usable. Other lengths are available on request.

Reference

Size 'A'

Size 'B'

Length

Weight (kg/100 m)

Packing Qty

PVC Chamfer 6 6 mm 8 mm 250 cm 2,90 100 m PVC Chamfer 11 11 mm 15 mm 250 cm 5,80 100 m PVC Chamfer 15 15 mm 21 mm 250 cm 8,00 100 m PVC Chamfer 20 20 mm 28 mm 250 cm 10,80 100 m PVC Chamfer 25 25 mm 35 mm 250 cm 16,00 100 m PVC Chamfer 30 30 mm 42 mm 250 cm 21,20 50 m

Steel chamfers

Hot rolled steel chamfer, straightened and cut. For forming chamfered edges in precast concrete structures. Easily weldable. In particular suitable for steel formwork. Chamfers with size 'A' = 7 mm, 25 mm and 35 mm are available on request. Reference

Size 'A'

Size 'B'

Length

Weight (kg/100 m)

Packing Qty

Steel chamfer 10 10 mm 14 mm 400 cm 50,00 100 m Steel chamfer 15 15 mm 21 mm 400 cm 100,00 100 m Steel chamfer 20 20 mm 28 mm 400 cm 170,00 100 m

PVC chamfers with nailing-flange

For forming chamfered corners to columns and beams. The optional nailing flange provides easy fixing to corner moulds and safe stripping thus ensuring maximum reusability. Other lengths are available on request.

Reference

Size 'A'

Size 'B'

Size 'C'

Size 'D'

Length

Weight (kg/100 m)

Packing Qty

PVC Chamfer N 11 11 mm 15 mm 25 mm 1,6 mm 250 cm 8,40 100 m PVC Chamfer N 11 PE 11 mm 15 mm 25 mm 1,6 mm 250 cm 8,40 100 m PVC Chamfer N 15 15 mm 21 mm 29 mm 2,0 mm 250 cm 12,60 100 m PVC Chamfer N 20 20 mm 28 mm 40 mm 2,5 mm 250 cm 24,85 100 m PVC Chamfer N 25 25 mm 35 mm 50 mm 2,5 mm 250 cm 27,00 50 m PVC Chamfer N 30 30 mm 42 mm 55 mm 2,5 mm 250 cm 32,40 50 m

Edgefix

PVC profile for forming round edges on concrete elements. The nailing flange provides easy fixing to corner moulds and safe stripping thus ensuring maximum reusability.

Reference

Size 'A'

Size 'B'

Size 'C'

Length

Weight (kg/100 m)

Packing Qty

Edgefix N20 20 mm 38 mm 1,8 mm 250 cm 13,70 100 m

Chamfers and construction profiles 43

Drip mould

Profile made from shock-resistant PVC. Drip moulds can be nailed to the mould prior to casting and prevent water damage to plaster and brickwork on balconies cantilever and cantilever slabs.

Reference

Size 'A'

Length

Weight (kg/100 m)

Packing Qty

Dripmould 12 12 mm 2,5 m 5,08 100 m Dripmould 15 15 mm 2,5 m 7,20 100 m Dripmould 20 20 mm 2,5 m 8,20 100 m

T-Fix profile

Protection profile made from impact-strength PVC for filling and covering joints in walls or slabs. Reference

Width

Height

Length

Weight (kg/100 m)

Packing Qty

T-Fix 20/40 40 mm 20 mm 2,0 m 13,30 100 m T-Fix 35/40 40 mm 35 mm 2,0 m 16,60 100 m

Fugenfix crack inducer

Plastic profile to induce a controlled crack in continuously laid concrete. No need for costly cutting and filling of joints. Excellent anchoring in concrete. Profile can be cut to size on site, single pieces can be jointed with a rebar. Fugenfix is suitable for expansion joints in concrete slabs while retaining its shape and exact dimensions.

Reference

Height

Length

Weight (kg/100 m)

Packing Qty

Fugenfix B 40 40 mm 250 cm 11,20 50 m Fugenfix B 70 70 mm 500 cm 14,70 30 m Fugenfix B 125 125 mm 500 cm 24,50 25 m

Trapezfix

Sturdy trapeze form profile made from PVC. White in colour. Standard profile length is 2,5 metres. Other sizes on request Reference

Base Width

Top Width

Height

Weight (kg/100 m)

Packing Qty

Trapezfix 15 15 mm 10 mm 10 mm 8,50 100 m Trapezfix 20 20 mm 15 mm 10 mm 10,00 100 m Trapezfix 30 30 mm 20 mm 15 mm 16,60 100 m

Accessories for precast concrete elements 44

Crossfix mat connectors

Connector and spacer for lattice beam ceilings (large area slabs). Tying wire is not required. Suitable for high tensile loads. Reference

Concrete cover

Range of reinforcement covered rebar mats + rebar bottom boom

Weight (kg/100)

Packing Qty

Crossfix 15/5+5 15 mm Ø 5 mm + Ø 5 mm 0,55 1 000 Crossfix 15/6+6 15 mm Ø 6 mm + Ø 6 mm 0,45 1 000 Crossfix 15/7+6 15 mm Ø 7 mm + Ø 6 mm 0,61 1 000 Crossfix 15/8+6 15 mm Ø 8 mm + Ø 6 mm 0,57 1 000 Crossfix 20/5+5 20 mm Ø 5 mm + Ø 5 mm 0,63 1 000 Crossfix 20/6+6 20 mm Ø 6 mm + Ø 6 mm 0,60 1 000 Crossfix 20/7+6 20 mm Ø 7 mm + Ø 6 mm 0,60 1 000 Crossfix 20/8+6 20 mm Ø 8 mm + Ø 6 mm 0,67 1 000

Rotafix-K

Spacer for concrete pipe applications. Open design to ensure good concrete flow. Alternative sizes are available on request.

*) First figure = longitudinal rebar diameter Second figure = circular rebar diameter

Reference

Concrete cover

For steel diameter

Weight (kg/100)

Packing Qty

Rotafix-K 25/5+5 25 mm 1" 5 mm + 5 mm 1,15 500 Rotafix-K 25/7+8 25 mm 1" 7 mm + 8 mm 1,15 500 Rotafix-K 25/8+10 25 mm 1" 8 mm + 10 mm 1,15 500 Rotafix-K 30/5+5 30 mm 1 1/4" 5 mm + 5 mm 1,19 500 Rotafix-K 30/7+8 30 mm 1 1/4" 7 mm + 8 mm 1,19 500 Rotafix-K 30/8+10 30 mm 1 1/4" 8 mm + 10 mm 1,19 500 Rotafix-K 35/5+5 35 mm 1 3/8" 5 mm + 5 mm 1,20 500 Rotafix-K 35/7+8 35 mm 1 3/8" 7 mm + 8 mm 1,20 500 Rotafix-K 35/8+10 35 mm 1 3/8" 8 mm + 10 mm 1,20 500 Rotafix-K 40/5+5 40 mm 1 1/2" 5 mm + 5 mm 1,29 500 Rotafix-K 40/7+8 40 mm 1 1/2" 7 mm + 8 mm 1,29 500 Rotafix-K 40/8+10 40 mm 1 1/2" 8 mm + 10 mm 1,29 500 Rotafix-K 45/5+5 45 mm 1 3/4" 5 mm + 5 mm 1,29 500 Rotafix-K 45/7+8 45 mm 1 3/4" 7 mm + 8 mm 1,29 500

Palfix fence post spacers

A four point spacer with integral links to give concrete cover to bars in posts and panels. Cages can be pre-assembled using spacers, and stacked in yard prior to placement in the mould. Suitable for bar diameter 4 mm to 8 mm in tapered, standard or slotted posts. Reference

Post size

Concrete cover

For steel diameter

Weight (kg/100)

Packing Qty

Palfix 75 75 x 75 3" 15 mm 5/8" 4 - 8 mm 0,65 1 000 Palfix 100 100 x 100 4" 15 mm 5/8" 4 - 8 mm 0,97 250 Palfix 120/15 120 x 120 4 3/4" 15 mm 5/8" 4 - 8 mm 0,92 250 Palfix 120/25 120 x 120 4 3/4" 25 mm 1" 4 - 8 mm 0,92 250

Alfafix

Spacer for lintels and girder sand ties with three reinforcement rods. Cages can be pre-assembled using spacers and then stacked in yard prior to placement in the mould. Other sizes are available on request.

Reference

Post size

Concrete cover

For steel diameter

Weight (kg/100)

Packing Qty

Alfafix 1 50 x 75 2" x 3" 20 & 55 mm 3/4" x 2 1/4" 6 & 8 mm 0,51 1 000 Alfafix 2 120 x 120 4 3/4" x 4 3/4" 15 & 100 mm 5/8" x 4" 6 mm 1,04 500 Alfafix 3 100 x 200 4" x 8" 20 & 160 mm 3/4" x 6 3/8" 10 & 16 mm 3,48 200 Alfafix 4 80 x 200 3 1/4" x 8" 25 & 155 mm 1" x 6 1/4" 12 & 12 mm 3,35 200 Alfafix 5 80 x 230 3 1/4" x 9 1/4" 25 & 185 mm 1" x 7 3/8" 12 & 12 mm 4,13 200

Quickfix

Plastic shims for lining slat construction, for adjusting doors, windows and other elements. With screw slit, nail holes and barbs to ensure good grip. Universal use. Different colours distinguish different types.

Reference

Colour

Thickness

Size

Weight (kg/100)

Packing Qty

Quickfix 2 yellow 2 mm 50 x 40 mm 0,23 500 Quickfix 3 white 3 mm 50 x 40 mm 0,30 500 Quickfix 5 grey 5 mm 50 x 40 mm 0,50 500


Plastic wedges

Rot-proof, high compression resistant plastic wedges. Serrated edges to prevent slippage, and to allow interlocking of additional wedges. Reference

Length

Width

Height

Weight (kg/100)

Packing Qty

Wedge # 2 50 mm 14 mm 12 mm 0,30 1 000 Wedge # 4 75 mm 28 mm 12 mm 1,24 1 000 Wedge # 6 120 mm 35 mm 20 mm 3,21 500 Wedge # 7 50 mm 35 mm 7/10 mm 1,10 500

Packfix

Packfix separate concrete slabs to allow air circulation which eliminates curing stains. Packfix strip is available in custom lengths on request. Reference

Length

Size

Weight (kg/100)

Packing Qty

Packfix-K 340 mm 4 mm gap width 0,38 1 000 Packfix strip 20 x 5 1000 mm 20 mm x 5 mm 7,00 5 000

Tying wire

Exceptionally fine quality wire as marketed for many years, soft annealed to very high standards, and acknowledged by steelfixers to be the premier tying wire. Packed in sacks of 25 kg each. Available on 2 or 25 kilo coils on request.

Reference

Wire Diameter

Coil size

Weight (kg/sack)

Packing Qty

Tying wire 1,2 1,2 mm ~ 18 gauge 21 m = 0,18 kg 25,0 2 900 m Tying wire 1,4 1,4 mm ~ 17 gauge 16 m = 0,18 kg 25,0 2 200 m

Bindefix tie mat connectors

Easy to use, labour saving ties for quick, firm tying of reinforcement. They require no tools, give no off-cuts, and are particularly suitable for use in the precast concrete industry. Supplied on cardboard strips, packed in boxes for easy shipping and storage. Other sizes are available on request.

Reference

Range of reinforcement covered

Packing Qty

Bindefix 6/ 6 4 + 6 mm / 5 + 6 mm / 6 + 6 mm 10 000 Bindefix 6/ 8 4 + 8 mm / 5 + 8 mm / 6 + 8 mm 10 000 Bindefix 8/ 8 7 + 8 mm / 8 + 8 mm 10 000 Bindefix 8/10 5 + 10 mm / 6 + 10 mm / 8 + 10 mm 10 000 Bindefix 8/12 5 + 12 mm / 6 + 12 mm / 8 + 12 mm 10 000 Bindefix 8/16 6 + 16 mm / 8 + 16 mm / 10 + 16 mm 5 000 Bindefix 8/20 6 + 20 mm / 8 + 20 mm / 10 + 20 mm 4 000

Loop ties

Loop ties are an alternative form of wiring together reinforcement using a tying tool. The loop tie is folded around the reinforcement intersection, the hook of the tying tool is then placed through the loop, pulled with a twisting action, giving a secure tie. Other lengths on request.

Reference

Wire Diameter

Length

Packing Qty

Loop tie 1,0 (100) 1,0 mm 100 mm 2 500 Loop tie 1,2 (100) 1,2 mm 100 mm 2 500 Tying tool 1


Marking tags for precast panels Typofix-L

Identification plate for precast concrete units. Typofix-L has both a side lug for pressing into fresh concrete and a preformed hole for tying wire. Text: your comany’s logo, name, and a blank part for manufacture date and identification numbers. Engraving of all signs and languages i.e. Arabic, Chinese, Greek characters. Engraving expenses only for work involved. Also available blank. Minimum order quantity 5 000 pieces.

Reference

Dimensions

Weight (kg/100)

Packing Qty

Typofix L 40 x 70 mm 1 1/2" x 2 3/4" 0,52 1 000 Typofix LG 50 x 90 mm 2" x 3 1/2" 1,01 1 000

Typofix-Z

Same as Typofix-L above but with pins instead of side lug. Minimum order quantity 5 000 pieces. Reference

Dimensions

Weight (kg/100)

Packing Qty

Typofix Z 40 x 70 mm 1 1/2" x 2 3/4" 0,54 1 000 Typofix ZG 50 x 90 mm 2" x 3 1/2" 1,01 1 000

Kennfix 1

Clip-on plastic tag for marking reinforcement. Reference

Dimensions

Weight (kg/100)

Packing Qty

Kennfix 1 30 x 60 mm 1 1/4" x 2 1/2" 0,18 1 000

Kennfix 2

Tag, made from extra thin plastic foil for marking reinforcement. Easy to mark and print. Reference

Dimensions

Weight (kg/100)

Packing Qty

Kennfix 2 100 x 55 mm 1" x 2 1/4" 0,16 8 000

Typofix-S

Identification plate for base surface of concrete lintels. Minimum order quantity 5 000 pieces. Reference

Dimensions

Weight (kg/100)

Packing Qty

Typofix S 30 x 40 mm 1 1/4" x 1 1/2" 0,20 2 500


Horseshoe shims

Horseshoe shims fit around projecting bars and are ideal for packing during construction involving precast concrete units. Also available made from polycarbonate.

Reference

Thickness

Size

Weight (kg/100)

Packing Qty

Horseshoe pads 75/02 2 mm 75 x 75 mm 0,86 500 Horseshoe pads 75/03 3 mm 75 x 75 mm 1,06 500 Horseshoe pads 75/05 5 mm 75 x 75 mm 1,80 500 Horseshoe pads 75/10 10 mm 75 x 75 mm 3,52 250 Horseshoe pads 75/20 20 mm 75 x 75 mm 4,44 250 Horseshoe pads 75/30 30 mm 75 x 75 mm 6,50 250

Square shims

Plastic shims are ideal for packing during construction involving precast concrete units. Compression roof, without slit. Other sizes available. Reference

Thickness

Size

Weight (kg/100)

Packing Qty

Plastic shim 70/02 2 mm 70 x 70 mm 0,95 1 000 Plastic shim 70/03 3 mm 70 x 70 mm 1,41 1 000 Plastic shim 70/05 5 mm 70 x 70 mm 2,40 500 Plastic shim 70/08 8 mm 70 x 70 mm 4,00 500 Plastic shim 70/10 10 mm 70 x 70 mm 4,41 300 Plastic shim 70/15 15 mm 70 x 70 mm 5,75 250 Plastic shim 70/20 20 mm 70 x 70 mm 7,05 250 Plastic shim 100/03 3 mm 100 x 100 mm 2,80 250 Plastic shim 100/05 5 mm 100 x 100 mm 4,68 250 Plastic shim 100/10 10 mm 100 x 100 mm 8,90 100 Plastic shim 25/03 3 mm 25 x 100 mm 0,76 1 000 Plastic shim 25/05 5 mm 25 x 100 mm 1,16 1 000 Plastic shim 140/03 3 mm 140 x 140 mm 4,50 200 Plastic shim 55/02 2 mm 55 x 55 mm 0,40 800

Eco shims

Inexpensive distance plates which are ideal for packing during construction involving precast concrete units. Plates can easily be stacked to reach greater heights. Small pins and matching holes prevent the plates from slipping and ensure good interlocking. The product exhibits extreme stability whilst preventing rust, stained concrete and spalling. The strength of this shim can be increased by adding mortar to the hollow recesses. Detailed lab test report on request. Plates with superior load bearing capacities made from high compressive and high strength plastic (polycarbonate) are available on request.

Reference

Thickness

Size

Weight (kg/100)

Packing Qty

Eco Shims 80/02 2 mm 80 x 50 mm 0,60 500 Eco Shims 80/03 3 mm 80 x 50 mm 0,70 500 Eco Shims 80/05 5 mm 80 x 50 mm 1,10 500 Eco Shims 80/10 10 mm 80 x 50 mm 2,40 500 Eco Shims 80/20 20 mm 80 x 50 mm 4,60 250 Eco Shims 80/30 30 mm 80 x 50 mm 6,90 250 Eco Shims 120/03 3 mm 120 x 80 mm 1,70 250 Eco Shims 120/05 5 mm 120 x 80 mm 2,65 250 Eco Shims 120/08 8 mm 120 x 80 mm 4,20 200 Eco Shims 120/10 10 mm 120 x 80 mm 5,30 200


Distafix plastic spacer caps

A range of caps for rebar ends. Tight fitting onto reinforcement bars and reduce formwork contact. Other sizes are available on request.

Type A

Type C

Type B

Reference

Type

Concrete cover

Steel diameter

Weight (kg/100)

Packing Qty

Distafix 15/ 4 A 15 mm 4 mm 0,15 1 000 Distafix 15/ 5 A 15 mm 5 mm 0,14 1 000 Distafix 15/ 6 A 15 mm 6 mm 0,12 1 000 Distafix 15/ 7 A 15 mm 7 mm 0,11 1 000 Distafix 20/ 4 A 20 mm 4 mm 0,16 1 000 Distafix 20/ 5 A 20 mm 5 mm 0,15 1 000 Distafix 20/ 6 A 20 mm 6 mm 0,14 1 000 Distafix 20/ 7 A 20 mm 7 mm 0,13 1 000 Distafix 50/ 5 A 50 mm 5 mm 0,47 1 000 Distafix 10/ 4- 8 B 10 mm 4- 8 mm 0,18 1 000 Distafix 15/ 4- 8 B 15 mm 4- 8 mm 0,20 1 000 Distafix 15/10-16 B 15 mm 10-16 mm 0,46 500 Distafix 20/ 4- 8 B 20 mm 4- 8 mm 0,25 1 000 Distafix 20/10-16 B 20 mm 10-16 mm 0,50 500 Distafix 25/ 4- 8 B 25 mm 4- 8 mm 0,30 1 000 Distafix 25/10-16 B 25 mm 10-16 mm 0,56 500 Distafix 30/ 4- 8 B 30 mm 4- 8 mm 0,30 1 000 Distafix 30/10-16 B 30 mm 10-16 mm 0,60 500 Distafix 35/ 4- 8 B 35 mm 4- 8 mm 0,35 1 000 Distafix 35/10-16 B 35 mm 10-16 mm 0,70 1 000 Distafix 40/ 4- 8 B 40 mm 4- 8 mm 0,40 1 000 Distafix 45/ 4- 8 B 45 mm 4- 8 mm 0,46 1 000 Distafix 50/ 4- 8 B 50 mm 4- 8 mm 0,50 1 000 Distafix 50/10-16 B 50 mm 10-16 mm 0,87 250 Distafix 20/ 4- 7 C 20 mm 4- 7 mm 0,13 1 000 Distafix 20/ 8-12 C 20 mm 8-12 mm 500 Distafix 20/13-18 C 20 mm 13-18 mm 250 Distafix 20/19-24 C 20 mm 19-24 mm 200 Distafix 25/ 4- 7 C 25 mm 4- 7 mm 0,16 1 000 Distafix 25/ 8-12 C 25 mm 8-12 mm 500 Distafix 30/ 4- 7 C 30 mm 4- 7 mm 0,16 1 000 Distafix 30/ 8-12 C 30 mm 8-12 mm 0,30 500 Distafix 30/13-18 C 30 mm 13-18 mm 250 Distafix 30/19-24 C 30 mm 19-24 mm 250

Rebar caps

Plastic rebar caps with waterstop. Type F with 14 mm base diameter. Type G with 46 mm base diameter for soft bases. Reference

Concrete cover

Steel diameter

Weight (kg/100)

Packing Qty

Rebar cap K 5 3 mm 5,0 mm 0,27 1 000 Rebar cap K 6 3 mm 6,0 mm 0,25 1 000 Rebar cap K 7 3 mm 7,0 mm 0,25 1 000 Rebar cap K 8 3 mm 8,0 mm 0,23 1 000 Rebar cap K 9 3 mm 9,0 mm 0,22 1 000 Rebar cap K 10 3 mm 10,0 mm 0,20 1 000 Rebar cap K 12 3 mm 12,0 mm 0,50 1 000 Rebar cap K 14 3 mm 14,0 mm 0,42 1 000 Rebar cap K 16 3 mm 16,0 mm 0,33 1 000 Rebar cap K 18 3 mm 18,0 mm 0,28 1 000 Rebar cap K 12/ 7 12 mm 7,0 mm 0,51 1 000 Rebar cap K 20/ 5 20 mm 5,0 mm 0,53 1 000 Rebar cap K 20/ 6 20 mm 6,0 mm 0,58 1 000 Rebar cap K 20/ 7 20 mm 7,0 mm 0,48 1 000 Rebar cap K 20/ 8 20 mm 8,0 mm 0,49 1 000 Rebar cap K 20/ 9 20 mm 9,0 mm 0,52 1 000 Rebar cap K 20/10 20 mm 10,0 mm 0,58 1 000 Rebar cap F 5 5,0 mm 0,11 5 000 Rebar cap F 6 6,0 mm 0,11 5 000 Rebar cap G 6 6,0 mm 0,67 1 000

Type K

Type K 20

Type

Type F


Mini corner guards

Plastic corner pieces are used to protect concrete or stone edges against metal strapping. Reference

Strap width

Weight (kg/100)

Packing Qty

Mini corner guard up to 21 mm (3/4") 0,44 1 000

Important Notice

Due to the nature of the material from which panel pads are made it must be noted that when stacked concrete components are pushed together, that the plastic panel pad becomes damaged. As a result small plastic particles may set into the rough concrete surface. Therefore no guarantee can be made that absolutely no marking will be caused on the surface of the concrete components. Small points may be visible.

We recommend that tests be conducted before employing panel pads to stack concrete components with delicate surfaces or surfaces that must remain free of blemishes.

Corner guards for transporting precast elements

Protects precast concrete parts against damage during transport. Made from plastic. Reinforced edges. Side lugs prevent chains, straps and ropes from slipping. Long life.

Reference

Strap width

Weight (kg/100)

Packing Qty

Corner guard up to 100 mm (4") 10,70 150

Panel pads (vertical) for stacking precast elements

Panel pads are stacking pads for precast units that prevent curing stains often produced by stacking on timbers. Plastic panel pads have supporting pins on both sides and holes for tension belts. Standard version is made from natural coloured material.

Reference

Dimensions

Weight (kg/100)

Packing Qty

Panel pad T 90 x 40 mm 1,30 500

Edge guard

Protects the edges of precast concrete elements against damage during transportation and storage. PVC guard available in two different lengths. Colour grey. Not suitable for sight concrete. Reference

Width

Length

Weight (kg/100)

Packing Qty

Edge guard 50 60 x 60 mm 50 mm 1,10 100 Edge guard 75 60 x 60 mm 75 mm 1,65 100

Panel pads (horizontal)

Panel pads are stacking pads for precast units that prevent the curing stains often produced by stacking on timbers. Standard version is made from natural coloured material. Reference

Size

Weight (kg/100)

Packing Qty

Panel pad Mini 70 x 50 mm 1,25 500 Panel pad Midi 140 x 58 mm 3,75 200 Panel pad Maxi 140 x 65 mm 4,57 200

Reference

Size

Weight (kg/100)

Packing Qty

Panel pad 4/D-25 Ø 25 x 4 mm thick 0,10 1 000

Accessories 50

Reference

Weight (kg/100)

Packing Qty

Planfix top section 1,80 250 Planfix nut 1,00 250 Planfix base 3,30 250

Plastic screed chair

New model for site production of screed chairs. Gives stable support to 45 mm diameter screed bars. Screed chairs are easily and quickly assembled from three components, a plastic saddle, a threaded shaft and a stable base section. The threaded shaft screws into the base section and enables the chair to be set accurately in height. Extension by use of thruty sleeve 22/26 which is also available in custom lengths.

Panel ties

Stable plastic tie for fixing insulating plates or recess bodies to formwork. Also available in a more sturdy version for heavy duty applications - please add the word 'super' to the reference/order code.

Reference

For plate thickness

Length

Weight (kg/100)

Packing Qty

Panel Tie 50 20 mm 3/4" 50 mm 2" 0,36 500 Panel Tie 75 30 mm 1 1/4" 75 mm 3" 0,38 500 Panel Tie 90 40 mm 1 1/2" 90 mm 3 5/8" 0,40 500 Panel Tie 100 50 mm 2" 100 mm 4" 0,50 500 Panel Tie 125 75 mm 3" 125 mm 5" 0,39 500 Panel Tie 150 100 mm 4" 150 mm 6" 0,69 500 Panel Tie 200 150 mm 6" 200 mm 8" 0,74 250

Drip washer

Drip washer for cavity wall ties. Tropffix 1 has a centrally located hole, Tropffix 2 has a slit. Reference

For cavity wall ties

Thickness

Outer Diameter

Weight (kg/100)

Packing Qty

Tropffix 1 3 mm Ø 3 mm 25 mm 0,11 1 000 Tropffix 2 4 mm Ø 2 mm 25 mm 0,11 1 000

Pressfix

Plastic clip with slit and centrally located hole for clamping onto cavity wall ties. Reference

Diameter

Weight (kg/100)

Packing Qty

Pressfix 1 60 mm 0,38 1 000 Pressfix 2 80 mm 0,57 500 Pressfix 3 80 mm 0,70 500

• Pressfix 2 for round ties • Pressfix 3 for flat ties

Safetyfix

This simple device could safe a life. Rebar safety cap. Rounded protective cap in bright colours to prevent injuries from protruding rebars. Safetyfix is synonymous with industrial health!

Reference

For steel diameter

Bar size

Weight (kg/100)

Packing Qty

Safetyfix 8-16 8 - 16 mm #2 - #5 0,64 250 Safetyfix 16-30 16 - 30 mm #5 - #8 2,15 100 Safetyfix 25-40 25 - 40 mm #8 - #12 7,10 50

Accessories 51

Tile spacers

Tile spacers for tile and bricklaying. Instant and precise joint width. Even and professional standard finish. Tile spacers are available in 12 versions, which suit ceramic wall and floor tiles, rectangular and mosaic forms. Tile spacers are conveniently bagged in transparent units of 200 pieces each, suitable for sales in Do-it-Yourself-Markets or showrooms. Tiling wedges are available on request.

Reference

Joint width

Weight (kg/100)

Packing Qty

Tilefix 1,5 1,5 mm 0,02 1 000 Tilefix 2 2,0 mm 0,02 1 000 Tilefix 3 3,0 mm 0,05 1 000 Tilefix 4 4,0 mm 0,07 1 000 Tilefix 5 5,0 mm 0,09 1 000 Tilefix 6 6,0 mm 0,10 1 000 Tilefix 8 8,0 mm 0,12 1 000

Centerfix grass joint spacers for cross joints

A complete range of special spacers for paving stones and interlocking paving stones, where grass can grow between the joints. Suitable for all types of patterns, i.e. herringbone, running bond, 6 and 12 inch tiles, cobblestone, large cobblestone, ashlar slate, diagonal bond, basket weave and carolina weave. Applicable for parking lots, private gardening and villas as well as for public areas.

Reference

Joint width

Spacer height

Weight (kg/100)

Packing Qty

for T joints: Centerfix T 25/25 25 mm 25 mm 1,50 500 Centerfix T 30/25 30 mm 25 mm 1,70 500 Centerfix T 30/50 30 mm 50 mm 3,02 250 Centerfix T 35/25 35 mm 25 mm 1,78 500 Centerfix T 40/25 40 mm 25 mm 2,40 500 for cross joints: Centerfix K 30 30 mm 25 mm 2,30 500 for special joints: Centerfix SP 30/6 30 mm 25 mm 1,47 500 for straight joints: Centerfix I 30 30 mm 25 mm 1,30 500

Nutfix slab spacer

Plastic spacer in both 20 mm and 50 mm heights, for use as an assembly aid when laying tiles, slabs, hard bricks and floor elements. Reference

for joint width

Height

Joint type

Weight (kg/100)

Packing Qty

Nutfix K 4/20 4 mm 20 mm cross joint 0,88 500 Nutfix K 4/50 4 mm 50 mm cross joint 2,03 500 Nutfix T 4/20 4 mm 20 mm T-joint 0,81 500 Nutfix T 4/50 4 mm 50 mm T-joint 1,70 500

Plattenfix slab assistant

Extra strong and sturdy support, 15 mm high, to assist laying slabs on flat roofs and terraces. 3 mm thick base-plate, 2 mm compensation plates for flush slabs. Ideal for use on soft sand blindings and insulating material. Reference

Size

Weight (kg/100)

Packing Qty

Plattenfix 140 x 140 mm 5,25 50 Base plate 140 x 140 mm 4,50 200 Compensation plates 55 x 55 mm 0,40 800

Notes 52

Notes 53

Safety notes and general information 54

DANGER! IMPROPER USE OF THE PRODUCTS SHOWN IN THIS CATALOGUE CAN RESULT IN SERIOUS INJURY OR EVEN DEATH! Safety Notice

It should be noted that the following cautionary notes apply to all items to be found in this catalogue. When in doubt about the correct usage of the products shown, you should immediately contact the local area office responsible for the sales of Seifert products (also referred to as the manufacturer) . It is to be noted that local legislation and safety standards are to be observed and respected at all times, and that these are binding for all consumers in their local areas.

The products shown are to be used by trained, qualified and experienced personnel only. The misuse and/or lack of supervision may result in accident or death. When in doubt please consult your supervisor. It is recommended that individual testing be carried out before application of the products. Due to the variable nature of working environments, each consumer is responsible for the determination of whether testing is required for all individual applications.

The consumer must evaluate the product application and identify all factors to be considered. The consumer is also responsible for preventing loading in excess of the shown maximum values. All values shown are deemed to be approximate, when in doubt about the suitability of a particular product, individual testing must be carried out.

All products are subject to wear, corrosion, deformation, excessive loading, alteration (both intentional and non intentional) and other factors that may affect the performance and safety rating of the product itself. All reusable products must be inspected at regular intervals to evaluate whether the product can continued to be used or if it must be replaced. The consumer is responsible for determining the frequency of the inspections as this is dependant upon the amount of use, surrounding environment and other factors that may not be known to the manufacturer.

Modification (intentional) and alteration (both intentional non intentional) by the consumer, especially such that includes heat treatment may affect the performance of the products. Such modifications and alterations may only be carried out by trained and experienced personnel who possess the necessary knowledge of materials and heat treatment. The manufacturer cannot accept any liability for the products after they have been modified.

Castings may never be welded at any point in time. This may cause carbides and subsequently destroy the load value of the product.

The reference to safety factors is relative. The safety factor required is to be determined by the degree of hazard and the risk of each individual application. The risks and hazards vary from application to application and therefore the determination of such is the responsibility of the consumer. The minimum safety factors of the local legislation and safety standards is to be enquired, and observed by the consumer at all times. Failure to do so may have consequences that the manufacturer cannot be made liable for.

Some products are part of a system as provided by the manufacturer. No liability can be accepted for systems where single components thereof have been replaced by those of another manufacturer. Liability can also not be accepted for single components provided by the manufacturer and that have been used to replace those of another manufacturer in the system thereof.

The manufacturer reserves the right to change the design of any of the products shown in this catalogue at any point in time and without prior notice. Plastic spacers

Plastic spacers for the manufacture of concrete may differ in shape, size, material, application and other properties, both in used and in pre-use condition. Consideration must be given to the forces that will apply to the spacers, and therefore the consumer is responsible for the individual determination of the type and amount of spacers to be used for each application.

Consideration should be given to the following factors:

• spacers may not turn, fall or move in any manner after application • spacers must be firmly attached to the reinforcement • spacers may not be largely deformed by the forces applied to them • spacers may display differing properties at differing ambient temperatures

Whilst the provision of recommendations is accepted as a general service to our customers, due to the fact that Gebr. Seifert GmbH & Co. has no influence over the conditions under which the spacers are to be employed, no guarantee can be given, nor liability accepted for the use of the products shown in this brochure.

Terms of sale, delivery and payment 55

other documentation, regardless of the form in which they are disclosed. It is expressly forbidden to make them available to third parties. Drawings and other documentation which accompany offers must be returned to us immediately on request if the subsequent order is not placed with us. Customers who order specially manufactured products assume full liability for ensuring that the patent and trademark rights of third parties are not violated by the manufacture and delivery of the goods. Tools and equipment shall remain the property of the supplier even when the costs of the tools or any share of such costs have been charged to the customer. The supplier is not obliged to hand over the tools or equipment. Alterations

We reserve the right to make alterations to construction and design at any time. Conditions

Insofar as these conditions are agreed, they shall apply to any subsequent transactions. Legal

The invalidity of any single clause does not affect the validity of the terms and conditions of sale in general.

Applicable law is German law; the seat of arbitration will be Schalksmühle, Germany. Seifert is also entitled to initiate legal proceedings at the purchasers’ local court of jurisdiction. Schalksmühle, February 2004.

The contract

The UN Agreement governing international contracts of sale applies to transactions with all clients whose commercial headquarters are outside of the Federal Republic of Germany in so far as they are not changed or supplemented by the following paragraphs. Differing conditions of purchase shall not find application.

All quotations are binding unless otherwise stated.

Supply is performed EXW according to Incoterms 1990. Sales prices

Our sales prices are to be understood in EUR (€), ex-works but free on truck, not customs cleared, packaging included. The prices charged are in all cases those in force on the day of delivery. Payments

All payments are to be settled in € unless otherwise agreed. Interest of 8% above the base rate of the European Central Bank will be due should the purchaser not settle payments within the agreed terms.

For customers in the European Union, payment is due net within 30 days of invoice date, unless otherwise agreed in our quotation or proforma invoice.

Customers overseas are requested to contact our export department for further information. Property

Seifert retains the ownership rights of all goods supplied until full and complete payment thereof. Fulfilment of contract

If our side of the contract cannot be fulfilled due to an act of God, unexpected events, strikes, lockouts, war or UN Security Council embargo, the contract shall be adjusted as appropriate. Insofar as any such adjustment shall not be justifiable on economic grounds, the customer shall be given the opportunity to withdraw from the contract. Delivery times

Delivery times are quoted subject to confirmation. The delivery period shall commence after the customer has made all necessary documentation and drawings available. For our part, the delivery period shall be deemed to have been met when the goods are ready for shipment. Claims for compensation are expressly excluded in all cases of late delivery, including those after the expiry of any period of grace which may be granted. Responsibility

All goods are to be inspected immediately after supply and any claim concerning the goods is to be made thereafter without delay. In any case claims made later than 6 months after supply cannot be accepted, even in the case of hidden defect.

All claims made by the purchaser are limited to a time period of 12 months beginning with the first day of notification.

We reserve the right acc. to Art. 46 of the convention to supply replacement instead of repair should the goods supplied not fulfil the contract. In this case the purchaser is obliged to put the defect goods at our disposal upon our request.

Compensation may only be demanded should Seifert be fully responsible for the non-fulfilment of contract directly related to the goods. Compensation is limited to € 25.000,00.

Recommendations made by telephone, as well as other verbal recommendations, including those made by our representatives, are without engagement. Contents and sizes

The content of the packing shall be determined by weighing. Slight deviations in the number of pieces may result from differing densities of raw materials, and do not represent grounds for complaint. All weights stated by us are to be considered as approximate values only for the purpose of determining transport costs. The conversion of all sizes from metric to US-sizes have been made approximate and for information only. In all cases the metric sizes are binding. Copyrights

We reserve unrestricted rights of ownership and copyright for all ideas, diagrams and

Seifert about Seifert 2

A strong programm Plastic, concrete and steel spacers for top and bottom, horizontal and vertical reinforcement. Lifting, fixing and connecting systems for precast concrete structures. Waterstop and sealant, formwork and shuttering products. Wal l spacers and accessories for precast concrete. Fastening anchors and spacers for insulating material. Chamfers and construction profiles. Magnetic products for steel moulds. Many other exiting products for the modern construction industry.

With best references: Minifix in Saudi Arabian desert, Topfix in Siberia, Rotafix in a concrete coated pipeline under the sea - our products prove themselves under most demanding conditions. References include: civil housing projects in Mecca, London's Covent Garden Opera House, Transharbour motorway in Hong Kong, airports in Jeddah and Athens, Sports Arena in Beirut, several military projects in Russia, Nuclear power plants in China, the Royal Palace in Riyadh and the Summer Palace in Abu Dhabi, bridges in South Europe as well as one of the largest Mosques in the world.

Gebr. Seifert GmbH & Co. Klagebach 90 58579 Schalksmühle Germany Tel. +49-2355 90 99 90 Fax +49-2355 90 99 99 e-mail [email protected] Internet http://www.seifert.de

Issue 2004/2005 - Магекс-В ЕООД ... Product... · The creativity and competence of our employees, ... fixing and connecting precast concrete components ... Schalfix round

Documents