Issue 195

Advertising: Tel +61 7 3266 1429 Email: [email protected] 1issuE 195 | 17.10.11 | PAgE

AT least 100,000 ha of new sawlog plantations must be planted in Queensland to meet the state’s growing demand for sustainably produced domestic timber products, a new industry report reveals.“Any significant expansion of the plantation estate will come from the private sector,” Timber Queensland chief executive Rod McInnes said.“But this will require facilitation by government.”Timber Queensland’s plantation policy statement, released at a central Queensland plantation investment forum in Gladstone last week, emphasises that

government needs to maintain support for research and development to improve productivity, address remaining impediments to plantation expansion, and could have a role in direct investment in the carbon component of new plantations.“The financial case for new plantation establishment has always been a challenge and the failure of managed investment schemes that focused on short-term financial gains rather than the long-term viability of the plantation investment makes attracting investment harder,”

This issue

Advertising: Tel +61 7 3266 1429 Email: [email protected]

6561

AFS/01-10-01

www.forestrystandard.org.au

issue 195 | 17.10.11 | Page 1

Private sector todrive plantationsGovernment must support industry to meet

state’s growing demand for timber products

MicroPro®

Copper Quat

Visit: www.osmose.com.au or phone: 1800 088 809Osmose® and MicroPro® are registered trademarks of Osmose, Inc. or its subsidiaries. A Better Earth Idea from Osmose sm and Treated Wood Just Got Greener sm are slogan marks of Osmose Inc and its subsidiaries. MicroPro timber products are produced by independently owned and operated wood preserving facilities. GREENGUARD® is a registered trademark of GREENGUARD Environmental Institute. * See MicroPro fastener and hardware information sheet.

© 2011 Osmose, Inc.

Tre

ated

Wood Just Got G

reenersm

A Better Earth Idea from Osmose sm®

Now

Approved For

Aluminium

Contact*

MicroPro®

MicroPro is GREENGUARD® Children and Schools Certified Greenguard® Children and Schools Certification indicates that a product has undergone rigorous testing and has met stringent standards for VOC emissions. In the USA, products certified to this criteria are suitable for use in schools, offices, and other sensitive environments.

Cont Page 2

• How is FWPA shaping up?• One brand .. one TABMA• Building authority comes down hard on non-compliance• Building codes restrict NZ market for EWPs

• Strong voice for Queensland timber importers• Review of standards high priority for AFS

Shortfall .. domestic timber supplies struggle to meet demands from housing.

http://www.forestrystandard.org.au

mailto:[email protected]

http://www.osmose.com.au

www.timtech.info

Advertising: Tel +61 7 3266 1429 Email: [email protected] PAgE | issuE 195 | 17.10.11 2

Mr McInnes said.The Gladstone forum was a joint initiative of Timber Queensland and the Department of Employment Economic Development and Innovation, with sponsorship from Forest and Wood Products Australia.The forum investigated opportunities for plantation expansion in the region, from around Bundaberg to Rockhampton.Researchers, government and industry met with plantation investment specialists to gain a clear picture of what needs to be done to secure investment in a sustainable plantation industry in the region.“It was a step towards making the 100,000 ha a reality,” Mr McInnes said.He said there was increasing recognition that timber was the world’s most environmentally friendly building product, provided long-term carbon storage and contributed to the growing imbalance of demand and supply in Queensland.The plantations policy statement points out that Queensland’s historic $2.7 billion forest and timber industry makes a strong and vibrant contribution to the state economy.Central to the ongoing prosperity of numerous local communities, the industry employs more than 20,000 workers who inject $1 billion into rural and regional Queensland.In the past, Queensland met its own timber needs; today there is a growing imbalance in supply and demand. Only 88% of Queensland’s timber needs are met with local production, and plantations contribute more than 80% of this.There is a growing shortfall of timber sourced from

Queensland and as a result timber imports are on the rise, says the policy statement.Population projections indicate the disparity between Queensland’s demand and supply will worsen. Population is expected to grow by 1.7 million over the next 20 years, requiring almost a million new private dwellings.

In the medium- term, Timber Queensland expects that by 2020 demand for wood will have increased by 33%.With local production unlikely to increase significantly over that time, Queensland’s timber resource will only meet 75% of the state’s needs.Imports are rising, and despite attempts by the federal government to improve legality of imported timber, a proportion of imported wood still comes from illegal logging.The Timber Queensland report says there remain

industry news

growing imbalance:domestic shortfall

as imports increase

Cont Page 6

There is a growing shortfall of timber sourced from Queensland and as a

result timber imports are on the rise

ForestWorks performs a range of industry

wide functions acting as the

channel between industry, Government

and the Australian Vocational Education

and Training (VET) system.

Core services:

• Skill Standards

• Material Development

• Networks

• Strategic Skills Planning

• Project Management

• Data Collection• Research

• Industry Advice

• Career Advice

• Adult Learning Expertise

ViCTORiAPO Box 612, North Melbourne 3051Tel: (03)9321 3500Email: [email protected] sOuTH WALEsPO Box 486, Parramatta 2124Tel: (02)8898 6990Email: [email protected] Box 2146, Launceston 7250Tel: (03)6331 6077Email: [email protected] BRisBANEPO Box 2014 Fortitude Valley 4006Tel: (07)3358 5169Email: [email protected]

Rod McInnes .. the financial case for new plantation establishment has always been a challenge.

From Page 1






www.vafi.org.au/ad



By JIM BOWDEN

CERTIFICATION, no matter the brand, has key objectives – to serve an environmental purpose and to improve the management of forests in general.That’s the belief of Richard Stanton who took up the new position of national secretary of Australian Forestry Standard on October 11.Mr Stanton, who as chief executive, supervised the winding down of A3P after its merger with NAFI spawned the Australian Forest Products Association, has joined AFS at its most critical development stage.

“Highest priority will be given to the review of standards – the Australian Forest Management Standard AS 4708 and the Chain of Custody Standard AS 4707,” Mr Stanton said.“Both of these standards are up for appraisal and we have initiated the process. We want to make sure that this runs as smoothly and efficiently as possible and takes into account all the suggestions for development in the interim period.”Mr Stanton’s other priority is the continued promotion of certification generally and AFS/PEFC certification in particular to a wider range of markets to provide reassurance to consumers.To this end, he is planning to meet with industry stakeholders and those potentially interested in certification programs as soon as possible.AFS is recognised internationally through the Program for the Endorsement of Forest Certification schemes (PEFC),

the world’s largest certification network with about 235 million ha of forests certified in compliance with world sustainability benchmarks. More than 8000 companies and organisations have achieved PEFC chain of custody certification.“There’s a lot of interest right now in the illegal logging issue and the potential legislation which the government may introduce,” Mr Stanton said.“There may be a role for certification in responding to this issue.”Meanwhile, Mr Stanton is involved in a busy round of meetings and presentations. He is making preparations for the AFS annual general meeting in Melbourne on October 19 and a number of AFS award presentations.The first of these was the presentation of the AFS-sponsored BPN Sustainability Award at the Building Product News awards night in Sydney last week. Mr Stanton will also present the Certified Timber Award at the Australian Timber Design Awards at Chapter House in Melbourne on October 18.

Mr Stanton was at the helm of A3P since its formation in 2004 and was appointed CEO in 2008. Prior to joining A3P, he gained substantial industry association experience with the Australian Paper Industry Council, the Plantation Timber Association of Australia and the National Association of Forest Industries.He has also worked in a number of policy development roles with the commonwealth

and NSW governments. He holds a Bachelor of Science (Forestry) Honours degree from the Australian National University and a Master of Business Administration from the University of Technology Sydney.Mr Stanton reflected: “Industry must continue to push certification standards. Everyone thinks certification is a good idea but there is some reluctance to pay for it.“After all, everyone wants to make sure their wood is coming from the right place.”

Richard Stanton .. everyone wants to make sure their wood is coming from the right place.

Review of standards high priorityas AFs sets goals for certification

industry news

• TABMA, through information, advice and services, provides its members with practical solutions to improve business management, growth and profitability

• TABMA members include merchants, retailers, joiners, manufacturers, frame & truss fabricators, importers, suppliers and carpenters

• TABMA places trainees or apprentices that are recruited, inducted, trained and monitored by us

• TABMA offers debtors control and collection through its wholly owned subsidiary, Building Trade Credit

• TABMA offers trade credit insurance through, IMC Newbury, at extremely cost effective rates.

• TABMA recruitment saves you time by advertising, vetting and interviewing for new staff at competitive rates

• TABMA offers industrial relations support

• TABMA provides industry specific short training courses

• TABMA provides OH&S auditing by specialist staff

• TABMA offers Chain of Custody consulting and auditing at minimal cost

• TABMA offers technical advice

• TABMA offers legal advice

• TABMA provides members with significant savings on fuel through Caltex and 7-ELEVEN outlets

• TABMA offers general insurance advice

• TABMA offers significant travel benefits

• TABMA holds a gala industry annual dinner

WHAT DOES TABMA DO FOR MEMBERS?

TABMA has representation in NSW, Queensland, South Australia, Western Australia and Tasmania. If we can assist you, please contact us on 02 9277 3100.

Promoting certification to a wider range of markets to provide reassurance to

consumers

Promoting certification to a wider range of markets to provide reassurance to

consumers



BUSINESS and management services provider SED Consulting has been commissioned to review the performance of Forest and Wood Products Australia since its inception in 2007.The final report on the review, required by a statutory funding agreement between FWPA and the federal government, will be presented at a special FWPA summit meeting scheduled for February 16 next year.The FWPA board has invited the four national representative organisations to the meeting – Australian Forest Growers, the Australian Forest Products Association, the Australian Timber Importers Federation and the Engineered Wood Products Association of

Australasia, who will assess the performance and future operations of the industry-owned company.

While FWPA will finance the project and assist the consultants with information they need, the review is totally independent. It will provide government, members and levy payers with an external perspective on their company’s performance. It will also assist FWPA to identify ways in which it might improve its effectiveness.Specifically, the review is required to examine:• The performance of the company in meeting its obligations under the Statutory Funding Agreement with the commonwealth.• The company’s implementation of its strategic and operating plans and the company’s effectiveness in meeting its priorities, targets and budgets as set out in these plans.• The efficiency with which the company carried out those plans, including, but not limited to, consideration of FWPA structure and processes; liaison with stakeholders; corporate governance; industry strategy and delivery; and corporate operations.• The delivery of benefits to the industry foreshadowed by

the company’s strategic and operating plans.

• The effectiveness in which FWPA has addressed recommendations from internal and external audits completed since 2007.

SED Consulting invites all stakeholders in FWPA to contribute to the review. Stakeholders include, but may not be restricted to, members of FWPA; levy payers of FWPA; members of industry advisory groups; members of industry associations; FWPA directors, management and staff; government and related bodies; and researchers in the forest and wood product industry.

The consultants will speak personally with a range of people. Those wishing to take part in the survey should contact Steve Laidlaw at SED Consulting on (03) 5572 1922 or mobile 0408 334 331. Email: [email protected]

Alternatively, a simple online survey can be completed at http://www.surveymonkey.com/s/LRVDGWY

The online survey will take about 10 minutes to complete.

Written submissions by email or the completed online survey should be submitted by October 30.

The contact at FWPA is Chris Lafferty, manager research and development. Tel: 03 9927 3220.

Forest and Wood Products Australia Ltd is the forestry and wood industry’s service provider, investing in research and development, industry promotion, technology transfer and education and standards coordination.

survey

How is FWPA shaping up?

SMITHCOMANUFACTURING, INC.

7911 N.E. 33rd Dr. ■ Portland, OR 97211503 -295-6590 ■ Fax 503 -295-6822 www.smithcomfg.com ■ [email protected]

Stretch your dollars with Smithco.

Improve the performance of your dry kiln operations with Smithco propellers. Smithco's 4, 6, 8 and 12-bladed propellers, ranging from 760 to 2135mm, can be configured for maximum air flow with lowest power usage. Our reversible, adjustable blade propellers provide the tools to optimize your cost/benefit ratios.Fully reversible for uniform drying cycle ■ Maximum air flow with any size motor and propeller speed ■ Permanent-mold aluminum blades and hubs, heat-treated for longest kiln life ■ Precision hubs with stainless steel hardware, balanced for vibration-free operation ■ Fast, easy and accurate blade pitch angle setting

Retrofitting or building new, get the most from every dollar with Smithco!

Stakeholders contribute to performance review


http://www.surveymonkey

http://www.smithcomfg.com




OcTOBER 16-19: SilviLaser 2011, University of Tasmania, Hobart. www.silvilaser2011.com

19: Sydney Hoo Hoo club 215 dinner meeting. Contact: Chris White 0411 293 646 or email [email protected]

25: Timber Queensland seminar. OHS Harmonisation & Workers compensation: Are you ready to comply with new legislation? 1:30 – 4:30 pm (registration from 1 pm). Broncos Leagues Club, 98 Fulcher Rd, Red Hill, Brisbane. With a new Work Health and Safety Act to understand and comply with by January, it’s time to assess if your business is prepared. Combine this with rising workers compensation claims and a 25% hike in WorkCover premiums and the need to prioritise health and safety is clear. The event is part of Safe Work Week 2011 and is supported by WorkCover Queensland. Register at www.timberqueensland.com.au/events or contact Clarissa Brandt on (07) 33587906 for more information. See notice P. 17.

27: canberra industry meetings. Hotel Realm, 18 National Circuit, Barton. 9.30 am-1 pm: Improving industry statistics workshop.1.30-3.30 pm: AFPA chamber meeting. 4-6 pm: FWPA board meeting. 7-11 pm: Industry dinner (National Ballroom 3).

28: canberra industry meetings.

Hotel Realm. 8-9 am: CRC for Forestry annual general meeting. 9-11 am: R&D Ideas Fair. 11.15 am-12.15 pm: FWPA annual general meeting. 12.15-1.15 pm: AFPA annual general meeting.

events

WHAT’S ON?1.15-1.30 pm: FWPA board meeting. 1.30-3 pm: Industry Lunch (all attendees). 3-5 pm: AFPA board meeting. Book registrations with Alice Logan Edwards, business manager, PO Box 239, Deakin West ACT 2600. Fax: (02) 62853855. Email: [email protected]

RSVP by Friday, October 14.

28: Timber Industry Dinner, incorporating the TABMA awards. Doltone House, Darling Island Wharf, Sydney. Supported by TDA NSW, the Furnishing Industry Association of Australia, the NSW Forest Products Association, the Timber Trade Industrial Association, WADIC, the Australian Timber Importers Federation, TABMA Australia, and WoodSolutions. Contacts: Sydney – (02) 9277 3100. Adelaide – 0407 102 244. Perth – 0414 908 465. Brisbane – (07) 3254 3166. Hobart – 0407 102 244.

31-2 (Nov): 5th International Woodfibre Resources & Trade conference. Grand Copthorne Waterfront Hotel, Singapore.Contact Pamela Richards on 61 3 5781 0069. Visit www.woodfibreconference.com

NOVEMBER4: Victorian Association of Forest Industries annual dinner. Crown Complex, Southbank, Melbourne. Guest speaker: Peter Walsh MLA, Victorian Minister for Agriculture and Food Security and Minister for Water. Visit www.vafi.org.au/ad or for bookings call Jillian Roscoe on (03) 9611 9002.

8-11: IUFRO Forest Health Joint Meetings. Colonia del Sacramento, Uruguay. Organised by the National

Australia’s forest, wood, pulp and paper products industry now has a stronger voice in dealings with government, the community and in key negotiations on the industry’s future, as two peak associations have merged to form a single national association.

The Australian Forest Products Association (AFPA) has been formed through the merger of the Australian Plantations Products and Paper Industry Council (A3P) and the National Association of Forest Industries (NAFI).

AFPA was established to cover all aspects of Australia’s forest industry:

- Forest growing; - Harvest and haulage; - Sawmilling and other

wood processing; - Pulp and paper processing; and

- Forest product exporting.

For more information on the Australian Forest Products Association (AFPA) or to enquire about membership , please call (02) 6285 3833.

Agricultural Research Institute (INIA) in Uruguay, the University of Uruguay (UDELAR) and the International Union of Forest Research Organisations (IUFRO). Motivated by the massive development of the forestry sector in several countries in South America.Visit www.iufrouruguay2011.org

16: FSc Australian annual awards dinner. Langham Hotel, Melbourne. Celebrating the 5th anniversary of the incorporation of Responsible Forest Management Australia (FSC Australia) and its exciting achievements. Contact FSC Australia on (03) 9329 9984 or email [email protected]

24-25: Bioenergy Australia 2011 conference and exhibition, Novotel Twin Waters Resort, Sunshine Coast, Queensland. Web: www.bioenergyaustralia.org

25: TABMA Queensland annual general meeting.

DEcEMBER1-2: ForestTEcH 2011: Tools& Technologies. Improving forest planning and operations. Albury, NSW. www.foresttechevents.com

5-6: ForestTEcH 2011: Tools& Technologies. Improving forest planning and operations. Rotorua, NZ. www.foresttechevents.com

MARcH 2012Engineered Wood Products Association of Australasia. conference, dinner, award presentations. (Date to be advised)

13-14: Future Forestry Finance: Investment, Growth and Strategic Outlook.

Sydney. www.forestryfinanceevents.com

http://www.silvilaser2011.com

http://www.silvilaser2011.com


http://www.timberqueensland.com.au/events

http://www.timberqueensland.com.au/events

http://www.woodfibreconference.com

http://www.woodfibreconference.com

http://www.vafi.org.au/ad

http://www.iufrouruguay2011.org

http://www.bioenergyaustralia.org

http://www.bioenergyaustralia.org

http://www.foresttechevents.com

http://www.foresttechevents.com

http://www.forestryfinanceevents



www.holtec.org


serious concerns about the sustainability of some imported timber, as well as meeting Australia’s technical standards. Increased imports deliver

limited benefit to the Australian economy, adding to the $2.2 billion trade deficit in forest and wood products, and fail to deliver regional socio-economic benefits or environmental services to Australia.

PROJECTIONS in a new housing report highlight just how large the aggregate housing supply challenge facing Australia has become.The Housing Industry Association-Jeldwen report estimates Australia will require 1.6 million homes over the nine years to 2020.“But if we build at the average rate of the last 20 years, many areas of the country will have a critical housing shortage by 2020,” says HIA senior economist Andrew Harvey.“Under such a scenario the cumulative national shortage could approach 500,900 dwellings.“Clearly that situation can’t be allowed to happen and it doesn’t have to happen.”Mr Harvey said substantial policy reform was required, and could be achieved, to ensure Australia began reducing its shortage of dwellings, rather than accumulating a larger one.The report provides projections of the underlying demographic demand for housing and the number of dwellings to be completed over the next nine years at a national, state, and local government area.“It is the most comprehensive report available regarding the homes Australia builds compared to what we need to build,” Mr Harvey said.The report says the greatest

housing supply challenge is in New South Wales which, under HIA’s medium build-rate scenario1, could reach a dwelling shortage of 155,700 dwellings by 2020 in the absence of sustained policy reform.Under the same scenario, the projected dwelling shortages at 2020 in the other states and territories are: 104,200 dwellings in Victoria; 112,000 in Western Australia; 91,800 in Queensland; 24,600 in South Australia; 12,500 in the Northern Territory; and 1400 in the ACT.Tasmania could reach a projected surplus of 1300 houses by 2020.Seven of the 20 LGAs with the largest projected housing shortfall by 2020 are in Western Australia, six are in Queensland, five are in New South Wales and two are in the Northern Territory.

industry news

Housing shortageonly 9 years awaysays latest survey

New projection .. critical housing shortage by 2020.

Imports add to trade deficitFrom Page 2


http://www.calibre-equipment.com


THE 2011 Australian Timber Design Awards presentation night in Melbourne on October 18 will be the greatest opportunity for the industry to network with architects and designers.All winners and finalists in the awards will be announced on the night at a banquet dinner with Australian cricketing legend and registered architect Max Walker acting as master of ceremonies.Highlight of the event will be the announcement of the 2011 People’s Choice Award, the result of online voting by the public. A judging panel will

select all other award winners.The Australian Timber Design Awards magazine which showcases this year’s winners will be handed out after award presentations and will be free to architects, designers, engineers and builders.The neo-Gothic architecture of Chapter House should provide a dramatic setting for the event.The ticket cost of $100 p.p. is heavily subsidised by award sponsors. Inquiries to: [email protected] or (02) 8424 3700Full report on the awards next issue of T&F enews.

study

gala night for timber design

Alicia Oelkers .. better service for members.

One brand ..one TABMA

DIRECTORS of TABMA Australia and TABMA Queensland have agreed to connect as one unified national association, effective October 17.TABMA Australia will be responsible for the day-to-day management of TABMA Queensland and Alicia Oelkers continues as operations manager in Brisbane, reporting to TABMA Australia CEO in Sydney Colin Fitzpatrick.Queensland chairman Steve Johnson said the national association had the resources and expertise to successfully relieve Queensland of much of the time-consuming administrative workload.“This will enable Alicia to concentrate on better servicing members and growing the placement of trainees and apprentices,” he said.“TABMA is becoming a truly national association so it makes sense for Queensland to be seen as part of the group rather than as a separate entity.”President of TABMA Australia Peter Hutchison welcomed the decision, which was made after ongoing lengthy discussions.“Although TABMA Qld has operated successfully and independently since 2001, we have always maintained a close working relationship and both boards considered that because of the parlous state of the world economy and economies of scale, it would strengthen the TABMA brand if we were seen to be as one,” Mr Hutchison said.


www.tanalised.com


A Conference on skills and training development of womenin construction, forestry, mining and energy industries

8 November – Evening Function 9 November – Full day conference, 2011, Sydney

Invitation to a very special event

You are invited to a very special event: a conference on skills and training development of women in construction, forestry, mining and energy related industries.

This Conference is of major importance to Australian industry. It is supported by CFMEU, Skills DMC, CPSISC and ForestWorks ISC.

The aim is to bring together participants from across the country and across a range of construction, forestry, mining and energy industries. Together they will design and recommend changes in industry practice so that the industry – assisted by government policy – can achieve skills and training development to lead or complement action

to address the under-representation of women in these industries and occupations.

• Togetherconferenceparticipantswill consider strategies to encourage women into these industries and occupations

• Togetherparticipantswilllookatways to ensure women receive the same, appropriate skills training for work in construction, forestry, mining and energy industries

• Togethertheywillconsiderstrategiesto ensure women have the same career paths and employment opportunities as male counterparts, once they are in construction, forestry, mining and energy industries.





















The conference will include sharing information about research and consideration of trial initiatives that have been carried out in construction, forestry, mining and energy industries.

It will present the reality and disadvantages of the current under-representation of women in construction, forestry, mining and energy industries – identifying key issues for attention.

The Conference will provide a focus for discussion with Governments for relevant announcements at the Conference to build on achievements to date, noting that any areas for policy development need to be within existing policy parameters.

A conference dinner will be held on the evening of the 8th November to allow participants to meet and hear from representatives from the Australian Government address this important policy issue.

Venue

Dinner8 November7pm onwardsL’AquaTerrace Room,Rooftop Level,Cockle Bay Wharf,Darling Harbour,Sydney NSW 2000

Conference9 November9am – 5pmTrades HallAuditorium,10/377 Sussex Street,Sydney NSW 2000

PO Box 612, North Melbourne Vic 3051Tel: +61 3 9321 3500. Fax: +61 3 9326 7800. Email: [email protected] registration form and other information from: www.forestworks.com.au

Registrations to be completed and paid in full by November 2, 2011

Industry Skills Councils activities are assisted by funding provided by the Commonwealth Government through the Department of Education, Employment & Workplace Relations.


http://www.forestworks.com.au



THE critical role women play in the timber industry was highlighted at the first ‘women in forestry’ professional development event held recently in Traralgon, Vic.Attended by more than 20 staff from VicForests, the event was specifically designed to recognise the achievements of women working in the forestry industry.“VicForests understands the need to actively encourage our female staff to consider their professional development and recognise the leadership potential they possess,” human resources manager Rebecca Gauci said.“Part of this process is ensuring all staff have the opportunity for future development to enable them to grow their careers.“We look forward to this becoming a regular event which allows staff to strengthen their personal networks, while also celebrating the diversity which exists within our organisation.“VicForests continually strives to be an ‘employer of choice’ and we hope this workshop has inspired staff to become future leaders.”Ms Gauci said women continued to be an important part of the broader forestry industry.The key focus of this year’s event was training for staff in the areas of leadership and resilience.The program focused on ‘emotional intelligence’ and was

facilitated by Christina Lovison of Mountain Ash Executive Development.“The training emphasised the need for staff to consider how their emotions and the emotions of others influence their decisions, behaviours and performance at work,” Ms Gauci said.“A second session following this training concentrated on leadership skills and leadership resilience.“Staff learnt the value of resilient leadership and the attributes which make for a resilient leader including courageous and confident decision making, adaptability and a strong sense of self-awareness.“We look forward to our staff applying this knowledge in their day-to-day management of the various issues they face.”

Timber & Forestry e-news is the most authoritative and quickest deliverer of news and special features to the forest and forest products industries in Australia, New Zealand and the Asia-Pacific region. Weekly distribution is over 6,400 copies, delivered every Monday. Advertising rates are the most competitive of any industry magazine in the region. Timber&Forestry e-news hits your target market – every week, every Monday!

HEAD OFFICEcustom Publishing Group

Unit 2- 3986 Pacific HighwayLoganholme 4129 Qld, Australia

PUBLISHERDennis Macready

[email protected]

CONSULTING EDITORJim Bowden

Tel: +61 7 3266 1429Mob: 0401 312 087

[email protected]

ADVERTISINGTel: +61 7 3266 1429

[email protected]

PRODUCTION MANAGERLeigh Macready

[email protected]

Opinions expressed on Timber & Forestry e news are not necessarily the opinions of the editor, publisher or staff. We do not accept responsibility for any damage resulting from inaccuracies in editorial or advertising. The Publisher is therefore indemnified against all actions, suits, claims or damages resulting from content on this e news. content cannot be reproduced without the prior consent of the Publisher- custom Publishing Group.

LeAdersHiP

Event recognisescritical role of

women in industry

Rebecca Gauci .. recognising the leadership potential of women in the forest industry.

Need for disaster relief housingAN international conference on sustainable disaster relief housing in Canada this month will bring together experts in the field to discuss swift and durable construction solutions.The conference in Ottawa, Ontario, on October 27 and 28, will focus on the catastrophic events in Japan, New Zealand,

Haiti, Chile, Pakistan and Indonesia – perfect examples of the devastation wreaked by natural events.There is an urgent need for swiftly erected and durable disaster relief housing. Years of research in the forest products industry have resulted in direct responses to these needs.






www.naturallybetter.com.au


STAFF from VicForests and Forests NSW have taken part in a workshop discussing the processes used to develop timber harvesting plans in Victoria’s state forests.VicForests’ director of planning Lachlan Spencer said the opportunity to share knowledge and experiences was extremely valuable for both organisations.“VicForests’ staff outlined the procedures which are in place to ensure the harvesting of Victoria’s forests remains sustainable,” he said.“Our resources staff use detailed information to indicate how much forest is available and the appropriate level of harvesting. VicForests’ tactical planning staff then create timber release plans that outline which specific areas will potentially be harvested in the next three to five years.“The key step in this process is ensuring the planned harvest levels match the predetermined sustainable harvest levels. This enables VicForests to ensure its harvesting rates are sustainable both now, and in the long term.

“VicForests’ staff showcased our approach to assessing forested areas prior to harvest to identify available timber volumes, biodiversity and other non-timber related values.”The workshop also discussed how the use of new technology can increase transparency and improve efficiency when

developing coupe plans and other significant information.“Forests NSW staff were greatly impressed with the professional systems and outlook of Vic Forests staff,” said Dean Kearney, project manager, native forest division, Forests NSW.“Forests NSW is hoping to continue a collegiate relationship with VicForests into the future, to continue to share knowledge and improve practices,” he said.As part of the visit, Forests NSW staff toured VicForests operations around Healesville and Toolangi to observe forest management practices first hand.“VicForests tactical planning staff visited Forests NSW operations in Coffs Harbour earlier in the year and our staff jumped at the chance to highlight the systems and procedures used here in Victoria,” Lachlan Spencer said.“Seeing forest management practices in action in other states is particularly valuable and assists our industry to continually evolve to improve environmental and commercial

outcomes.“Sharing ideas and broadening our knowledge base is vital in ensuring Australia remains a world leader in sustainable forest management practices,” he said.Forests NSW, a public trading enterprise within NSW Department of Industry and Investment, sustainably manages more than 2 million ha of native and planted forests and contributes nearly $1 billion to the state’s economy.

VicForests is a state-owned business harvesting about 5500 ha of native forest in Victoria each year under strict environmental regulations.This equates to less than 0.1% of the 7.8 million ha of native forest across the state.

Lachlan Spencer .. ensuring harvesting of forests remains sustainable.

FOrest wOrKsHOP

From the 36” utility chipper to a 144” pulp mill wood yard and chip mill machines. Other specialised individual equipment items include the radial log cranes, drum debarkers, Rosser head debarkers, vibrating conveyors, rotary and drum screens, X rotor hogs and hammer hogs. Contact details: +64 9 832 7930 or +1 478 252 5223Email: [email protected] Web: www.fulghum.com

Fulghum Industries, FIRST in wood chippersAN INDUSTRY LEADER FOR 51 YEARS1

states share forest managementideas on sustainable harvesting

Methods to identify available timber volumes

‘Seeing forest management practices in action in other

states is particularly valuable and assists our industry to continually evolve to

improve environmental and commercial outcomes’ –

Dean Kearney


http://www.fulghum.com



NEW ZEALAND’S landmark timber structural demonstration building won further acclaim at the NZ Wood Timber Design Awards in Auckland last week.The Nelson Marlborough Institute of Technology Arts and Media Building (NMIT) picked up three blue ribbon excellence awards: commercial engineering; commercial architecture; and clever wood solutions.Designed by structural engineers, Aurecon, the NMIT Arts and Media building is the first in a new generation of multi-storey timber buildings. It employs an advanced damage avoidance earthquake design that is a world first for a timber building.This revolutionary earthquake technology has been developed

by Aurecon structural engineers and is based on the latest timber

research from the University of Canterbury. The building also employs several new timber structural systems for floors, beams and columns that truly demonstrate the ability of structural timber for use in multi-storey construction.Laminated veneer lumber (LVL) was used as it has strength properties that allow for the fabrication of beams, columns and walls at sizes similar to those used in concrete or steel designs.The project was the subject of a national design competition sponsored by the NZ government to realise a building whose structural form uses and showcases its construction in timber and encourages the future use of timber in the design and construction of multi-level

commercial buildings.All structural timber components were grown, milled, manufactured and erected within an 80 km radius of Nelson.Aurecon technical director and lead structural engineer for the NMIT project, Carl Devereux, says: “We have seen huge interest in this project from overseas groups as it showcases a new era in the sustainable design of resilient buildings so beautifully. A huge amount of research went into the use of timber and in particular using the LVL systems.“After the devastating Christchurch earthquakes, our research and innovation around using other timber systems has increased three-fold. The

AwArds

Multi-storey timber building collectsthree top prizes in NZ design awards

Conference focuses on forests in the Pacific

Engineered Wood Products Association of AustralasiaPlywood House, 3 Dunlop Sreet, Newstead, 4006 Queensland AustraliaTel: +61 7 3250 3700 Fax: +61 7 3252 4769 Email: [email protected]

GREEN and CLEANEngineered wood products from EWPAA members are manufactured from100% LEGAL forests – they are GUARANTEED to meet all Australasian standards.

You can rely on EWPAA certified products – other certifications are just not the same.Choose consistent quality and structurally safe PAA-accredited products.

Don’t be exposed to liability. Unbranded, non-compliant products are not worth the risk!

Engineered wood products have the best environmental credentials and the lowest emissions. They meet all specifications for emissions certified under JAS-ANZ accreditation.

Be sure.

Be safe.Visit

www.ewp.asn.au

Cont Page 17

Excellence in timber design .. the Nelson Marlborough Institute of Technology Arts and Media building



www.ewp.asn.au


LIMITATIONS in New Zealand’s building codes are preventing the timber industry from creating greater value out of improving technology that allows wood to replace steel as a construction material.The report by the New Zealand Institute of Economic Research, released by the NZ Wood Council, claims exports of forestry and other wood-related products are valued at $4.6 billion, or 13.3% of total goods exports.With a ‘wall of wood’ available to harvest as forests mature early next decade, the report claims there is potential for exports to increase by 40% over the next 20 years.

China’s demand for logs has resulted in a boom in log prices in recent years. The

Guardians of the New Zealand Superannuation Fund revealed last week that the value of its investment in the Kaingaroa forest had increased by $89.2 million in the year to June 30.The increase was “largely courtesy of high appetite from China”, but the real impact was “hidden somewhat” by the value of the NZ dollar at the end of June – then above US80c – when the calculation was made.NZ Wood chief executive Jane Arnott warned that additional value was being lost because the current building standards

did not take into account improvements to the technology of engineered timber for use in large commercial buildings.The NZIER report found that over the past five years, the real value of forestry primary products exports – mainly logs – has grown at 18.6% a year, compared to 3.5% annual growth for processed wood exports.Glued laminated beams, including those manufactured locally, are now used for structural support in large buildings, once the preserve only of steel. But while the technology has take-up around the world, Ms Arnott says this has not happened to any great degree in New Zealand because of a lack of understanding in the construction industry, and building standards that date back to 1993.“It’s presenting a limiting factor to some of our new engineered timber that is available and being manufactured in New Zealand,” Ms Arnott said.NZ Wood has already set up an advisory centre to try to educate the construction and architecture sector about the options for engineered timber, and the organisation is appealing for an “immediate” update of the building code.“The Government’s focus is on adding value; we want to be adding value, but we need certain things to be in place. One of those is greater commercial take-up in commercial construction in New Zealand,” Ms Arnott said.NZ Wood expects exports of forestry and wood products to soar during the next 20 years, according to NZ Wood.

enGineered wOOd

Outdated building codes restrictmarket for EWPs in New Zealand

Barrier .. standards limiting factor to use of engineered wood in New Zealand.

RIPPING · CROSS-CUTTING · OPTIMISING · FINGER JOINTING · GLUING PLANING AND PROFILING · WINDOW PRODUCTION · AUTOMATION

WEINIG OFFERS MORE

The complete package in solid wood processing!WEINIG is synonymous with techno-logical advancement. And has been for more than 100 years. WEINIG quality allows our partners around the world both in handcrafts and industry to stand out above the competition.

With machines and systems that set standards in performance and economy. With intelligent production concepts for optimal value creation. And with customised solutions – from application through to service.

Your WEINIG expert at

WWW.WEINIG.com

Standards work against value-adding technology

Jane Arnott .. additional value lost in current building standards.


www.weinig.com


BRISBANE timber traders were introduced to Stora Enso Australia’s new 18,000 sq m warehouse facility in the Brisbane suburb of Virginia last week, taking part in a day of sporting and social events to celebrate the opening.Guests were welcomed by Stora Enso Australia managing director Matthew Wood and Kurt Schrammel, the Finnish forestry company’s vice-president of marketing and sales (overseas), based in Austria.The opening of the Virginia warehouse with 12,000 sq m of outside storage and 6000 sq m under cover, will be followed by the commissioning of a new 38,000 sq m complex at Derrimut, 18 km west of Melbourne on the Melbourne Cup weekend.

Stora Enso currently holds about 40,000 cub of timber in warehouse storage in Melbourne, Adelaide, Gosford and Brisbane. The main

product range is timber framing material for wall and truss manufacturing, supplied mostly from the company’s sawmills in the Baltics and Central Europe.

“Our vision is to maintain and further develop our position as the number one quality supplier of European softwoods in the Australian market,” Matthew Wood said.

Stora Enso Timber Australia became a wholly owned subsidiary of Stora Enso Timber Oy Ltd in June 2005 after the final purchase of the 49% shareholding of Moxon Timber.

Based in Finland, Stora Enso has an annual production capacity of 6.4 million cub m of sawn timber, including 3.2 million cub m of value-added products, 11.8 million tonnes of paper board and 1.3 billion sq m of corrugated packaging.

The group has around 26,000 employees and 85 production units worldwide.

industry news

Day of celebrations marks opening ofstora Enso’s new Virginia warehouse

You can expect superior outcomes from Austbrokers Premier in the following key areas:• Focus on premium value and insurer security• Expert advice for Business Interruption• Premiums + claims + deductibles – self insurance option analysis• Committed claims management & settlement negotiations.• On-going service and advice, not just at renewal time.

Call Alan Jones 0419 754 681 or Scott Hastings 0406 382 582 today.

Freecall 1800 803 180ABN 95 010 576 324 AFSL 238123

Insuring it all stacks up.

Selecting the right equipment to maximise your production output is similar to selecting the right people to maximise your insurance protection.

Austbrokers Premier has been working with the timber industry for over 25 years and we know what insurance best suits your industry and risks. Whether it’s a complicated business interruption loss or a burnt out frontend loader we work hard to get you the right outcome.

InSurAnce..It’S All In the SelectIon

Impressed .. making a tour of the Stora Enso Australia’s new Virginia warehouse are David Thomas, Stora Enso sales, Brisbane, Christian Wenlof, Stora Enso sales support manager, Sweden, Mona Forsberg, Stora Enso Paper, Sydney, John Halkett, Australian Timber Importers Federation, Sydney, Helen Pham, Stora Enso, John Titmarsh, Gill and Co, Rocklea and Cleveland, Ken Newing, Virginia Building Supplies, and Teresa Lotho, Stora Enso.

FSC Australia AnnualAwards Dinner 2011

November 16Langham Hotel – Melbourne

The Forest Stewardship Council Australia annual dinner and awards presentation celebrates the 5th anniversary of the incorporation of Responsible Forest Management Australia (FSC Australia) and its exciting achievements.The awards dinner offers FSC certificate holders, FSC members and consumers the opportunity to engage, discuss and plan future direction for the responsible management of the world’s forests.It provides the growing community of responsible, aware and informed Australian’s access to industries that meet the rigorous demands of the FSC system – a system that ensures global best practice complies with, and exceeds, public expectations.The FSC awards recognise of FSC certificate holders who have best complied with, contributed to, and helped build the FSC system in Australia this year.

Sponsorship tables and ticketsThere are a limited number of sponsorship tables which are tiered to

Major, Gold and Silver. All sponsors will be able to showcase their FSC products/services at silent auction on the night.

Sponsorship inquiries and table bookings should be directed to FSC Australia on (03) 9329 9984 or email [email protected]




By JIM BOWDEN

IT really was a mouthful. Even the acronym was too ‘cute’ .. QTIEWA.The Queensland Timber Importers, Exporters and Wholesalers Association has been truncated to Queensland Timber Importers Association (QTIA) – its original moniker from its foundation year almost 29 years ago.But what’s in a name?“QTIA will continue to have significant relevance in the industry; it’s very financial and has a voice for the state’s importers that’s recognised by such organisations as DAFF, FWPA, AFPA, AQUIS, Customs and others,” says foundation director Gerry Gardiner providing another list of acronyms.Members of the Queensland organisation are also positioning for a closer alliance with the Australian Timber Importers Federation and Mr Gardiner has joined the ATIF board.“There’s a lot of history here,” he said. “But as ATIF gathers momentum and strength it makes sense to be part of the

national organisation.”Although QTIA itself cannot be part of ATIF, its members can, and quite a few have gone on board.

Some members recall what they term the “halcyon days” of the federation which was made up of four state importer bodies in Queensland, New South Wales,

Victoria and South Australia.These state bodies formed the membership of ATIF which at the time was considered a “true importers’ federation” funded by each organisation with state representatives attending national meetings, a logical configuration.Today, the ATIF structure allows for individual membership, rather than membership by state bodies.But many individual importers who were initially opposed to the new ATIF structure say the national body has moved

on, there is new heart in its operations and they must be objective.

The Australian Timber Importers Federation Inc has been established for more than 20 years. It is responsible for coordinating the state activities of timber importers and wholesalers and identifies issues that are of national concern such as matters associated with customs, shipping and quarantine.

ATIF represents its sector on the FWPA market knowledge advisory group and coordinates suitable market development programs that benefit imported timber products. Funding of such program is negotiated with the Forest and Wood Products Research and Development Corp.

ATIF lobbies and liaises with the federal government on various issues such as tropical wood imports and certification of timber imports in relation to their legality, sustainability and sourcing from well managed forests.

Umbrella .. ATIF monitoring timber imports in all states.

AssOCiAtiOns

What’s in a name? QTiA still hasa strong voice for state members

‘As ATIF gathers momentum and strength it makes sense

to be part of the national organisation’

Producers laud US government’s study on thebenefits of wood in green building construction

A STUDY released by the US Department of Agriculture and the Forest Service on the benefits of using wood in green building construction supports the industry’s long-held view about wood as a responsible choice for construction.“Results of the study on issues related to green building are extremely welcome, and we commend this commitment to sound scientific study on the matter,” American Wood Council resident Robert Glowinski said.“The study calls for supporting

three industry initiatives that further USDA’s climate change mitigation and job creation objectives. We strongly endorse the support of the Forest Service for additional LCA research, technology transfer for wood use in the non-residential sector, and to demonstrate the significant carbon-reducing benefits that accrue from wood product use.”Life-cycle assessment has revealed significant environmental benefits associated with the use of wood, such as reduced greenhouse gas air emissions

and the sequestration of carbon.“Working forests are functional carbon sinks for communities across the country and provide economic incentives for landowners to maintain healthy forests rather than selling the property for development,” Mr Glowinski said.“The resulting wood products store carbon for life and net much lower air and water emissions than other building materials whose production is fossil-fuel intensive.“Perhaps one of the most

important findings is related to the current state of the economy and how using wood supports jobs.“In addition to the obvious environmental benefits of maintaining working forests and producing wood products, the industry provides well-paying rural jobs, from forests to lumber yards. We hope that others in the industry and government will take note of these findings and support policy and regulations to protect the health of the industry.”



By JIM BOWDEN

THE Queensland timber treatment industry has a strong ally in the Building Services Authority which has displayed the sharp teeth necessary to prosecute builders and specifiers who use non-compliant materials in construction.“It can sometimes be a long process but we do catch them,” says Don Vosper, BSA’s assistant manager of technical resources resolutions.Speaking at a Timber Queensland treaters’ forum in Brisbane, Mr Vosper said government building inspectors were very satisfied with the performance of treated products in Queensland, although he said the industry needed to provide a clearer product identification of the different levels of timber treatment.“The method of identification of treatment levels and their purpose for use is the big issue for us,” he said. “And from a building inspector’s point of view, a review of the performance of treated timber in tropical regions is just as important.”Mr Vosper said inspectors north of the Tropic of Capricorn were

concerned about the effect of humid conditions on timber; they wanted assurances that H3 treatment was suitable in extremely moist but still above-ground environments.He referred to the suitability of H3 treatment for critical structural elements directly exposed to weather, such as handrails and balustrades, given that performance of these elements is easily compromised by poor construction practices – ends

of timber not adequately primed and poor joint construction causing water retention in joints.“This is not to be taken as a criticism, more a ‘need to know’ by inspectors and specifiers in the tropical north,” Mr Vosper said.Mr Vosper said building inspectors had reported no failures with LOSP envelope treated timber and end sections that had been treated after cutting.“We did expect to see failures but they haven’t occurred. Infestations have occurred only where barriers were inadequate or poorly maintained,” he said.“But the alarm bells are ringing on this, because we’re not chemical experts, so there are some concerns. The bottom line, however, is there have been no reported failures from envelope treatment and it’s been around for some time. But I guess time will tell.”Mr Vosper says he is not a believer in self-regulation in the building trade.“The problems we have are in work practices and the dubious nature of some people who use the wrong specifications,” he said.

“We can’t hold a timber treater or supplier responsible for that. Suppliers provide only what they are asked to provide.“Our biggest gripe is with the building industry itself, the construction side of the business, where builders engage their own certifiers, and I’ll pinpoint project builders in this.“That’s why we’re coming down heavily in our auditing of the building trade – and the scrutinising of retaining walls is included in this which relates to proper treatment and the way they are constructed.“We’re looking out for inadequate paint protection after installation, incorrect or non-durable fixings and inadequate preservative treatment of cladding.”BSA has a team of six government certifiers based in Brisbane with this role in regional areas given to building inspectors.The authority is ramping up the division and will take on additional certifiers.“A more proactive and bigger team will investigate the certifiers as well as carry out certification audits to make sure they comply with legislation,” Mr Vosper said.

“Our first prosecution of a certifier two months ago was successful and the certifier was deregistered.“Construction has to comply with the building code of Australia and the Building Act and must comply with the applicable standard.”Mr Vosper pointed to a case where a large deck on a $1 million home had failed because it used products installed in a way that did not comply with the manufacturer’s instructions. H2 treated timbers were used in exposed locations.Returning to treated timber branding, Mr Vosper said the industry needed to provide better marking and clearer identification of the treatment levels used.“I remember when the F grades of timber were colour-coded. I don’t know why they don’t continue with this practice.”The Queensland Building Services Authority is continuing its education sessions for contractors and certifiers on correct construction methods, particularly for decks and retaining walls.The TQ treaters’ forum also discussed concerns about CCA as a restricted chemical product, flood affected treated timber and a draft report of TPAA timber process guidelines, presented by Greg Jensen of Arch Wood Protection, which was unanimously supported by the meeting.The Brisbane meeting confirmed that Colin MacKenzie of Timber Queensland and Jack Norton of DEEDI would attend future meetings of the TM-006 joint technical committee, thanks to respective funding by Forest and Wood Products Australia and the Engineered Wood Products Association of Australasia.

wOOd PreservAtiOn

Timber treaters are treating us right

Praise for treated timber .. Ron Vosper of the Building Services Authority (second from right) at the Timber Queensland treaters’ forum with Jack Norton, senior principal scientist, Ecosciences Precinct, Department of Employment, Economic Development and Innovation, Grahame Henderson, Corbek Timber Preservation, Arundel, Qld, and Steven Koch, Arch Wood Protection (Aust) Pty Ltd, Narangba.

Building authority comes down hard on non-compliance

‘We want assurances that H3 treatment is suitable in extremely moist but still

above-ground environments’ – Don Vosper



ORGANISERS have hailed Melbourne’s Ride to Work Day on October 12 a huge success, with an estimated 40,000 Victorians pedalling their way to workplaces.According to one report, there was at least two all-wood bicyles in the run.

It seems there a lot of wooden bikes out there, ranging from the glue-it-yourself, no-metal kind, to award-winning, high-end designer bikes. But this near all-wooden bike (pictured), handmade by Dutch industrial designer Jan Gunneweg, must be one of the most beautiful wooden specimens.

Made out of solid walnut and weighing under 16 kg, the bike’s unique cachet is all in the wheels, which each sport a thick wooden spoke. Drawing attention away from the metal support spokes, the wooden

spokes create the impression that there is a continuous line from front wheel, through the frame and all the way to the rear wheel.Gunneweg says the spokes “symbolise the legs of man,”

adding that “balancing the wheels was pretty challenging because of the width of the wooden spoke.”

Though it may seem paradoxical, wood may actually be more sustainable as materials for bike design, due to the energy-intensity of steel and aluminium. Plus, the nature of wood lends more easily to the do-it-yourself ethic, which may explain the recent explosion of handmade wooden bicycles in the US.

Gunneweg, whose obsession is wood, has previously designed two wooden bikes before this version, and says that this latest model delivers a smoother ride.

THE Tasmanian government has taken action to avert the forest industry choking on a stockpile of logs caused principally by the shut down of the Triabunna woodchip mill seven months ago.I applaud the quick action by the Resources Minister Bryan Green to make $1.1 million available to shift the logjam in the south of the state and to transfer sawlogs to the north west, where Forestry Tasmania has been unable to supply contracted volumes.FT advised the minister late last week that without urgent action, there was a grave risk the industry could grind to a standstill prior to Christmas, and before the intergovernmental agreement was fully implemented. The Minister requested advice on the best possible solution to the following short-term issues: the build up of sawmill waste; the build up of pulp logs on

landings; the lack of sawlog supply to the north west; and relief for forest contractors.Acknowledging there is little likelihood of the Triabunna facility opening in the short term, Forestry Tasmania recommended transporting

about 39,000 tonnes of pulpwood from the south and north west to the only remaining export facility at Bell Bay; transporting about 5000 tonnes of sawlog from the south to the north west; and moving about 24,000 tonnes of sawmill waste and residues to Bell Bay.Following an exhaustive analysis, Forestry Tasmania concluded the additional transport task would cost $1.1 million more than would otherwise have been incurred if Triabunna was open.On the positive side, the arrangement would clear the backlog and avert the risk of an industry shut down prior to Christmas; avert the risk of stand downs in the short term for about 800 employees in the industry; generate a final product value for Tasmania of around $6 million; provide direct payments to transport contractors of $2-$2.5 million and direct payments to harvest

contractors of around $1

million; overcome a critical

sawlog shortage in the north

west; and enable sawmillers/

processors to clear their yards

of waste wood.

As a result of the government’s

prompt response, FT, in

partnership with contractors, is

confident the transport task can

begin as early as next week.

FT has been diligently working

to minimise the impacts of the

Triabunna shut down, mainly

through whole log shipments.

These shipments are providing

a dual benefit – reducing the

stockpile of wood that would

otherwise be exported as chips,

and proving up a new market to

downstream this lower quality

wood into rotary peeled veneer,

right here in Tasmania. These

shipments will continue.

tAsMAniA

government action prevents forestindustry choking on a log stockpile

BOB GORDONManaging DirectorForestry Tasmania

By

Wood on wheels more sustainable ride for bike trippers

Wooden spokes symbolise the legs of man



next best thing to watch out for in leading seismic design solutions is the use of CLT timber.”

This is not the end of the awards season for the NMIT building as it has been announced as a finalist at the globally prestigious UK Structural Awards 2011.Established in 1968, the

structural awards recognise and reward the work of the world’s most talented structural designers, their indispensable contribution to the built environment and showcase

projects that lead the industry’s development.Winners will be announced at an awards ceremony being held in London on November 18.

From Page 11

tiMBer treAtMent

Finalist at uK global structural awards


www.timberqueensland.com.au/events


Classifieds

? ?? ???? ??? ??We’ve got Questions

Only YOU can answerWe want your feedback

Click here to go to the online survey form

From time to time we welcome your feedback to ensure we are bringing you the very best product we can.

Please take time to fill out the following ONLINE questionnaire.

Satisfaction SurveyPlease complete this surveyOverall, how do you rate the flip page software?O Very goodO GoodO NeutralO BadO Very bad

How long have you been reading enews?O Less than a month O 3-4 monthsO 1-3 years O Cannot rememberHow often do you read enews?O Daily O Once a weekO 2-3 times a week

Are you happy with editorial content?O DefinitelyO It could be betterO Not sure

Do you read the enews in double page view or single page view?O Double pageO Single page




Advertising SalesCustom Publishing GroupT: (07) 32561776e: [email protected]

ProductionT: (07) 3392 9810e: [email protected]

www.industryenews.com.au

Timber & Forestry e news is publishedby Custom Publishing Group.

Timber & Forestry e news is a full colour e magazineemailed every Monday to Decision Makers withinthe Australian and New Zealand Timber and Forestrysectors.

Advertising is booked with a minimum 4 weekbooking with discounts for 12, 24 and 48 weekbookings.

12 week- 7.5% Discount24 week- 10% Discount48 week- 15% DiscountClassified ads can be booked in a per issue basis.All advertisements link to customer websites oremail address with an option for rich text (flash).

BENEFITS:

DIRECT PENETRATION via email.WEEKLY opposed to monthly alternatives.NEWS that is up to date that will ensure readership.COST EFFECTIVE advertising rates.

All prices quoted plus GST and based on Art being supplied.We can create artwork if required – Eighth/Quarter $44 Half $66 which will be billed if complete art is notsupplied to our specifications.

Video: Maximum 3 meg swf file. Animation: gif file

Due to the regularity of timber & forestry e news and the tight deadlines no customer proofs can be sent.

SDisplay Ads

Rate Size Specificationsper Issue + GST Height x Width

Full Page Bleed $330 303mm x 216mm Half Page Vertical $182 254mm x 93mm Half Page Horizontal $182 125mm x 190mm Third Page Horizontal $143 73mm x 190mmQuarter Page Vertical $120 125mm x 93mmEighth Page $72 60mm x 93mmFront Page Third Horizonal $176 73mm x 190mmFront Page Masthead $77 33mm x 45mm

Classifieds

Half Page Vertical $182 220mm x 93mm

Quarter Page Vertical $120 107mm x 93mm

Eighth Page Horizontal $72 51mm x 93mm

Full Page Bleed $330 303mm x 216m

Display Ads Minimum 4 issue booking

Classified Ads per week

Extras: Video and Animated ads - Add 20% per issue

Artwork Specifications: Please supply all artwork as High Resolution (300dpi) Pdf’s or jpegs.Send artwork to [email protected]

DEADLINES Booking – Noon Wednesday for Monday edition. Material – Noon Thursday

Terms: Account Clients- 14 days New Accounts: Payment on Booking All Classifieds- Payment on booking (Credit card preferred)

RATES

T: (07) 3841 8075T: (07) 3266 1429




http://www.industryenews.com.au

Issue 195

Documents

plantation expansion

micropro timber products

domestic timber products

plantation estate

new plantation establishment

investment harder

direct investment

treated wood