DYNAMIC CALIBRATION SYSTEMS has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017 ''General Requirements for the Competence of Testing & Calibration Laboratories'' for its facilities at PLOT NO.63, FIRST CROSS STREET, AUDCO NAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU, INDIA in the field of CALIBRATION Certificate Number: CC-2390 Issue Date: 31/07/2019 Valid Until: 30/07/2021 This certificate remains valid for the Scope of Accreditation as specified in the annexure subject to continued satisfactory compliance to the above standard & the relevant requirements of NABL. (To see the scope of accreditation of this laboratory, you may also visit NABL website www.nabl-india.org) Signed for and on behalf of NABL N. Venkateswaran Chief Executive Officer
33
Embed
ISO/IEC 17025:2017 DYNAMIC CALIBRATION SYSTEMS 2019 - 2021.pdf · DYNAMIC CALIBRATION SYSTEMS has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017 ''General
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
DYNAMIC CALIBRATION SYSTEMShas been assessed and accredited in accordance with the standard
ISO/IEC 17025:2017''General Requirements for the Competence of Testing &
Calibration Laboratories''for its facilities at
PLOT NO.63, FIRST CROSS STREET, AUDCO NAGAR, KATTUPAKKAM, CHENNAI., CHENNAI,THIRUVALLUR, TAMIL NADU, INDIA
in the field of
CALIBRATIONCertificate Number: CC-2390
Issue Date: 31/07/2019 Valid Until: 30/07/2021
This certificate remains valid for the Scope of Accreditation as specified in the annexure subject to continuedsatisfactory compliance to the above standard & the relevant requirements of NABL.
(To see the scope of accreditation of this laboratory, you may also visit NABL website www.nabl-india.org)
Signed for and on behalf of NABL
N. VenkateswaranChief Executive Officer
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
100 mV to 1 V 0.452% to 0.440% Using Standard 6 ½DMM by Direct Method
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 1 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
30 V to 300 V 0.045% to 0.055% Using StandardMultifunction Calibratorby direct method
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 2 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
Capacitance (1kHz) 1 µF to 30 µF 0.35% to 0.74% Using StandardMultifunction Calibratorby direct method
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 3 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
Inductance(1KHz) 100 µH to 1 H 1.2% Using Zeal DecadeInductance Box byDirect Method
24 ELECTRO-TECHNICAL- DIRECTCURRENT (Measure)
DC Capacitance 1 nF to 0.01 F 5.18% to 4.86% Using Standard 6 ½DMM by Direct Method
25 ELECTRO-TECHNICAL- DIRECTCURRENT (Measure)
DC Current 1 A to 10 A 0.085% to 0.21% Using Standard 6 ½DMM by Direct Method
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 4 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
Remarks
26 ELECTRO-TECHNICAL- DIRECTCURRENT (Measure)
DC Current 1 mA to 100 mA 0.066% to 0.064% Using Standard 6 ½DMM by Direct Method
27 ELECTRO-TECHNICAL- DIRECTCURRENT (Measure)
DC Current 100 µA to 1 mA 0.096% to 0.066% Using Standard 6 ½DMM by Direct Method
28 ELECTRO-TECHNICAL- DIRECTCURRENT (Measure)
DC Current 100 mA to 1 A 0.064% to 0.085% Using Standard 6 ½DMM by Direct Method
29 ELECTRO-TECHNICAL- DIRECTCURRENT (Measure)
DC Resistance 1 kOhm to 100 kOhm 0.027% to 0.023% Using Standard 6 ½DMM by Direct Method
30 ELECTRO-TECHNICAL- DIRECTCURRENT (Measure)
DC Resistance 1 MOhm to 10 MOhm 0.017% to 0.047% Using Standard 6 ½DMM by Direct Method
31 ELECTRO-TECHNICAL- DIRECTCURRENT (Measure)
DC Resistance 10 MOhm to 100MOhm
0.047% to 0.95% Using Standard 6 ½DMM by Direct Method
32 ELECTRO-TECHNICAL- DIRECTCURRENT (Measure)
DC Resistance 10 Ohm to 100 Ohm 0.046% to 0.016% Using Standard 6 ½DMM by Direct Method
33 ELECTRO-TECHNICAL- DIRECTCURRENT (Measure)
DC Resistance 100 kOhm to 1 MOhm 0.023% to 0.017% Using Standard 6 ½DMM by Direct Method
34 ELECTRO-TECHNICAL- DIRECTCURRENT (Measure)
DC Resistance 100 MOhm to 300MOhm
Using Standard 6 ½DMM by Direct Method
35 ELECTRO-TECHNICAL- DIRECTCURRENT (Measure)
DC Resistance 100 Ohm to 1 kOhm 0.016% to 0.027% Using Standard 6 ½DMM by Direct Method
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 5 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
Remarks
36 ELECTRO-TECHNICAL- DIRECTCURRENT (Measure)
DC Voltage 1 V to 10 V 0.004% to 0.0039% Using Standard 6 ½DMM by Direct Method
37 ELECTRO-TECHNICAL- DIRECTCURRENT (Measure)
DC Voltage 10 V to 100 V 0.0039% to 0.0063% Using Standard 6 ½DMM by Direct Method
38 ELECTRO-TECHNICAL- DIRECTCURRENT (Measure)
DC Voltage 100 mV to 1 V 0.01% to 0.004% Using Standard 6 ½DMM by Direct Method
39 ELECTRO-TECHNICAL- DIRECTCURRENT (Measure)
DC Voltage 100 V to 1000 V 0.0063% to 0.0064% Using Standard 6 ½DMM by Direct Method
40 ELECTRO-TECHNICAL- DIRECTCURRENT (Source)
DC Current 1 A to 20 A 0.034% to 0.14% Using StandardMultifunction Calibratorby direct method
41 ELECTRO-TECHNICAL- DIRECTCURRENT (Source)
DC Current 1 mA to 100 mA 0.02% to 0.019% Using StandardMultifunction Calibratorby direct method
42 ELECTRO-TECHNICAL- DIRECTCURRENT (Source)
DC Current 100 mA to 1 A 0.019% to 0.034% Using StandardMultifunction Calibratorby direct method
43 ELECTRO-TECHNICAL- DIRECTCURRENT (Source)
DC Current 190 µA to 1 mA 0.03% to 0.02% Using StandardMultifunction Calibratorby direct method
44 ELECTRO-TECHNICAL- DIRECTCURRENT (Source)
DC Resistance 1 MOhm to 10 MOhm 0.014% to 0.069% Using StandardMultifunction Calibratorby direct method
45 ELECTRO-TECHNICAL- DIRECTCURRENT (Source)
DC Resistance 1 kOhm to 1 MOhm 0.234% to 0.014% Using StandardMultifunction Calibratorby direct method
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 6 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
Remarks
46 ELECTRO-TECHNICAL- DIRECTCURRENT (Source)
DC Resistance 10 MOhm to 300MOhm
0.069% to 0.42% Using StandardMultifunction Calibratorby direct method
47 ELECTRO-TECHNICAL- DIRECTCURRENT (Source)
DC Resistance 100 Ohm to 1 Kilo Ohm 0.005% to 0.234% Using StandardMultifunction Calibratorby direct method
48 ELECTRO-TECHNICAL- DIRECTCURRENT (Source)
DC Resistance 2 Ohm to 10 Ohm 0.062% to 0.016% Using StandardMultifunction Calibratorby direct method
49 ELECTRO-TECHNICAL- DIRECTCURRENT (Source)
DC Voltage 1 V to 10 V 0.0019% to 0.0014% Using StandardMultifunction Calibratorby direct method
50 ELECTRO-TECHNICAL- DIRECTCURRENT (Source)
DC Voltage 10 mV to 100 mV 0.024% to 0.0035% Using StandardMultifunction Calibrator
51 ELECTRO-TECHNICAL- DIRECTCURRENT (Source)
DC Voltage 10 V to 1000 V 0.0014% to 0.0025% Using StandardMultifunction Calibratorby direct method
52 ELECTRO-TECHNICAL- DIRECTCURRENT (Source)
DC Voltage 100 mV to 1 V 0.0035% to 0.0019% Using StandardMultifunction Calibratorby direct method
DC Resistance 10 Ohm to 100 Ohm 0.016% to 0.005% Using StandardMultifunction Calibratorby direct method
54 ELECTRO-TECHNICAL-ELECTRICALEQUIPMENT(Measure)
Timer 60 s to 9000 s 0.81s to 65s Using Digital Timer byComparison Method
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 7 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
PT-100 (-) 200 °C to 800 °C 1.40°C Using PortableCalibrator by DirectMethod
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 8 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
N-type -200 °C to 1300 °C 1.20°C Using StandardMultifunction Calibratorby direct method
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 9 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
T-type -250 °C to 400 °C 0.93°C Using Standard Multi-function Calibrator bydirect method
72 ELECTRO-TECHNICAL- TIME &FREQUENCY(Measure)
Frequency 300 kHz to 1 MHz 0.04% to 0.10% Using Standard 6 ½DMM by Direct Method
73 ELECTRO-TECHNICAL- TIME &FREQUENCY(Measure)
Frequency 5 Hz to 300 kHz 1.16% to 0.04% Using Standard 6 ½DMM by Direct Method
74 ELECTRO-TECHNICAL- TIME &FREQUENCY (Source)
Frequency 120 Hz to 500 MHz 0.0006% to 0.05% Using StandardMultifunction Calibratorby direct method
75 ELECTRO-TECHNICAL- TIME &FREQUENCY (Source)
Oscilloscope(AmplitudeDC Signal)
1 mV to 130 V 4.84% to 0.06% Using StandardMultifunction Calibratorby direct method
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 10 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
Remarks
76 ELECTRO-TECHNICAL- TIME &FREQUENCY (Source)
Oscilloscope(AmplitudeSquare Wave)
3 mVp-p to 130 Vp-p 2.6% to 0.12% Using Standard Multifunction Calibrator bydirect method
77 ELECTRO-TECHNICAL- TIME &FREQUENCY (Source)
Oscilloscope(Bandwidth)
50 kHz to 500 MHz 8.09% Using Standard Multi-function Calibrator bydirect method
78 ELECTRO-TECHNICAL- TIME &FREQUENCY (Source)
Oscilloscope(TimeMarker)
2 ns to 5 s 0.58% Using Standard Multi-function Calibrator bydirect method
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 11 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
0 to 180° 30minutes per arc Using Profile Projector
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 12 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
0 to 200 mm 6.8µm Using Slip Gauges &Long Slip Gauges
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 13 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
Gap/Width Gauge 0.2 to 200 mm 3.9 µm Using Slip Gauge &Electronic Comparator
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 14 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
0.17 to 20 mm 0.8µm Using Slip Gauge &Electronic Comparator
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 15 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
Radius Gauge up to 50 mm 6.60µm Using Profile Projector
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 16 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
Sprit level/Block level upto 600 mm 6.9 µm using precision spritlevel, slip gauge & sinebar
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 17 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
Taper Scale 0 to 200 mm 25.8µm Using Profile Projector
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 18 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 19 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
Vee Block Symmetricity Up to to 200 mm 6.0µm Using Mandrel &Electronic HeightGauge
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 20 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
Caliper Checker 0 mm to 600 mm 7.16µm Using Electronic HeightGauge
141 MECHANICAL-DIMENSION(PRECISIONINSTRUMENTS)
Dial Calibration Tester(LC:0.0001 mm)
0 mm to 50 mm 1.96µm Using Gauge Block &Electronic Comparator.Procedure as per IS9483.
142 MECHANICAL-DIMENSION(PRECISIONINSTRUMENTS)
Electronic HeightGaugeL.C: 0.1µm
0 mm to 1000 mm 7.0µm Using Long Slip GaugeBlocks & Length Bars.Procedure as per IS2921.
143 MECHANICAL-DIMENSION(PRECISIONINSTRUMENTS)
Electronic Probe WithDRO / LVDTL.C.:0.0001mm
0 mm to 100 mm 0.70µm Using K Grade SlipGauges
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 21 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
Remarks
144 MECHANICAL-DIMENSION(PRECISIONINSTRUMENTS)
Floating Carriage DiaMeasuring MachineLC:0.1µm(Alignment ofcenter to base fcdm,Micrometer head,overall accuracy fcdm)
0 mm to 100 mm 4.16µm,0.77µm,1.61µm
Using Gauge Blocks,Mandrel & ElectronicHeight Gauge
145 MECHANICAL-DIMENSION(PRECISIONINSTRUMENTS)
Length Bar 125 mm to 500 mm 4.66µm Using LengthMeasuring Machineand procedure basedon ISO 3650 & IS7014.
146 MECHANICAL-DIMENSION(PRECISIONINSTRUMENTS)
Long Slip Gauges 125 mm to 500 mm 4.66µm Using LengthMeasuring Machineand procedure basedon ISO 3650 & IS7014.:
147 MECHANICAL-DIMENSION(PRECISIONINSTRUMENTS)
MicrometerHead(LC:0.0001 mm)
0 mm to 50 mm 1.96µm Using Gauge Block &Electronic Comparator.Procedure as per IS9483.:
148 MECHANICAL-DIMENSION(PRECISIONINSTRUMENTS)
Profile Projector /VMM(Angular)
0 ° to 360 ° 3.2 "sec of arc Using Angular GlassScale
149 MECHANICAL-DIMENSION(PRECISIONINSTRUMENTS)
Profile Projector /VMM(Linear)
0 mm to 300 mm 1.5µm Using Linear GlassScale
150 MECHANICAL-DIMENSION(PRECISIONINSTRUMENTS)
Profile Projector /VMM(Magnification)
10 x to 100 x 0.7% Using Glass Scales
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 22 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
Remarks
151 MECHANICAL-DIMENSION(PRECISIONINSTRUMENTS)
Slip Gauge 0 mm to 25 mm 0.15µm Using Gauge BlockCalibrator & K GradeSlip Gauges.Procedure based on IS2984.
152 MECHANICAL-DIMENSION(PRECISIONINSTRUMENTS)
Slip Gauge 25 mm to 50 mm 0.18µm Using Gauge BlockCalibrator & K GradeSlip Gauges.Procedure as per IS2984.
153 MECHANICAL-DIMENSION(PRECISIONINSTRUMENTS)
Slip Gauge 50 mm to 75 mm 0.21µm Using Gauge BlockCalibrator & K GradeSlip Gauges.Procedure as per IS2984.
154 MECHANICAL-DIMENSION(PRECISIONINSTRUMENTS)
Slip Gauge 75 mm to 100 mm 0.25µm Using Gauge BlockCalibrator & K GradeSlip Gauges.Procedure based on IS2984.
155 MECHANICAL-DIMENSION(PRECISIONINSTRUMENTS)
Specimens 0.05 µm to 12.5 µm 6.0% Using SurfaceRoughness Tester:
156 MECHANICAL-DIMENSION(PRECISIONINSTRUMENTS)
Surface RoughnessTester
0.05 µm to 12.5 µm 6.0% Using SurfaceRoughness specimen
157 MECHANICAL-DIMENSION(PRECISIONINSTRUMENTS)
Verification of Co-ordinating MeasuringMachine
0 mm to 2000 mm 5.18µm Using Long SlipGauges & Length bars.Procedure as per ISO10360.
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 23 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
Remarks
158 MECHANICAL-DUROMETER
Durometers Shore A 0 Shore A to 100 ShoreA
1.0Shore A Using Shore HardnessCalibrator As perASTM D2240-05
159 MECHANICAL-DUROMETER
DurometersShore D 0 Shore D to 100 ShoreD
1.0Shore D Using Shore HardnessCalibrator As perASTM D2240-05
100 N to 5000 N 0.04% Using Dead WeightForce CalibrationMachine with StainlessSteel / Dead Weightsand Loading hangers.As per IS 4169:2014/ISO 376:2011
162 MECHANICAL-MOBILE FORCEMEASURING SYSTEM
Push Pull Gauge /Force Gauge
0 N to 2000 N 0.04% of Rdg Using Slotted StandardWeights As Per ASTME4-16
163 MECHANICAL-PRESSUREINDICATING DEVICES
Pressure(Gauge,Switches, Sensors,Transducers)
0 to 1000 bar 0.46% of Rdg Using Digital PressureIndicators & PressureComparator pump ByComparison Method Asper DKD-R-6-1
164 MECHANICAL-PRESSUREINDICATING DEVICES
Vaccum (Gauge,Switches, Sensors,Transducers)
-1 bar to 0 bar 1.2% of rdg Using Digital Vaccum &Pressure ComparatorPump DKD-R-6-1
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 24 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
Remarks
165 MECHANICAL-TORQUEGENERATINGDEVICES
Torque Multiplier 0 Nm to 5000 Nm 0.90% of Rdg Using Digital TorqueWrench Sensor WithIndicator ByComparison Method
20 % RH to 95 % RH 1.9% RH Using DigitalHygrometer, HumidityGenerator byComparison Method
170 THERMAL-TEMPERATURE
Glass thermometers 30 °c to 200 °c 1.8°c Using 3 wire RTD withprecision digitalThermometer LiquidBath (Oil), byComparison Method
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 25 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
Remarks
171 THERMAL-TEMPERATURE
IR Thermometer (Non-Contact Type)RadiationThermometer.
50 °c to 1200 °c 3.99°c Using Standard IRThermometer & Blackbody Source byComparison Method
172 THERMAL-TEMPERATURE
RTDs, Thermocouples(with and withoutindicators), DataLoggers, Recorders,Transmitters, DigitalThermometers
-196 °C to -196 °C 1.26°C Using 4 wire RTD withtemperature calibrator,Liquid nitrogen Bath, byComparison Method
173 THERMAL-TEMPERATURE
RTDs, Thermocouples(with and withoutindicators), DataLoggers, Recorders,Transmitters, DigitalThermometers
-80 °C to 250 °C 2.4°C Using 4 wire RTD withhigh precision digitalThermometer lowtemperature bath byComparison Method
174 THERMAL-TEMPERATURE
Thermocouples (withand without indicators),Data Loggers,Recorders,Transmitters, DigitalThermometers
250 °C to 1200 °C 3.65°C Using Standard S-typeThermocouple WithPortable Calibrator &Dry Block ByComparison Method
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 26 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
N-Type (-)200 °C to 1200 °C 4.03°C Using PortableCalibrator by DirectMethod
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 27 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
K-type -200 °C to 1350 °C 1.10°C Using StandardMultifunction Calibratorby direct method
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 28 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 29 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
Surface Plate Up to 3000 x 3000 mm 1.7+Vl+w/150µm Using Precision SpritLevel, Slip Gauge &Sine Bar
23 MECHANICAL-DIMENSION(PRECISIONINSTRUMENTS)
Electronic HeightGaugeL.C: 0.1µm
0 mm to 1000 mm 7.0µm Using Long Slip GaugeBlocks & Length Bars.Procedure as per IS2921.
24 MECHANICAL-DIMENSION(PRECISIONINSTRUMENTS)
Profile Projector /VMM(Angular)
0 ° to 360 ° 3.2 "sec of arc Using Angular GlassScale
25 MECHANICAL-DIMENSION(PRECISIONINSTRUMENTS)
Profile Projector /VMM(Linear)
0 mm to 300 mm 1.5µm Using Linear GlassScale
26 MECHANICAL-DIMENSION(PRECISIONINSTRUMENTS)
Profile Projector /VMM(Magnification)
10 x to 100 x 0.7% Using Glass Scales
27 MECHANICAL-DIMENSION(PRECISIONINSTRUMENTS)
Verification of Co-ordinating MeasuringMachine
0 mm to 2000 mm 5.18µm Using Long SlipGauges & Length bars.Procedure as per ISO10360.
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 30 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
Remarks
28 MECHANICAL-HARDNESS TESTINGMACHINES
Verification of BrinellHardness TestingMachine HBW 10/3000
10/3000 HBW to10/3000 HBW
2.0% HBW Using HBW HardnessBlocks As per IS6506.2.2012
29 MECHANICAL-HARDNESS TESTINGMACHINES
Verification of BrinellHardness TestingMachine HBW 5/750
5/750 HBW to 5/750HBW
1.4% HBW Using HBW HardnessBlocks As per IS6506.2.2012
30 MECHANICAL-HARDNESS TESTINGMACHINES
Verification of RockwellHardness TestingMachine
0 HRC to 100 HRC 1.04HRC Using HRC HardnessBlocks As per IS1586.2.2012 By DirectMethod
31 MECHANICAL-HARDNESS TESTINGMACHINES
Verification of RockwellHardness TestingMachine
0 HRWB to 100 HRWB 1.3HRWB Using HRWB HardnessBlocks As per IS1586.2.2012 By DirectMethod
32 MECHANICAL-HARDNESS TESTINGMACHINES
Verification of VickersHardness TestingMachine HV 30
30 HV to 30 HV 2.2% HV Using HV HardnessBlocks As per IS6507.2.2012
33 MECHANICAL-PRESSUREINDICATING DEVICES
Pressure(Gauge,Switches, Sensors,Transducers)
0 to 1000 bar 0.46% of Rdg Using Digital PressureIndicators & PressureComparator pump ByComparison Method Asper DKD-R-6-1
34 MECHANICAL-PRESSUREINDICATING DEVICES
Vaccum (Gauge,Switches, Sensors,Transducers)
-1 bar to 0 bar 1.2% of rdg Using Digital Vaccum &Pressure ComparatorPump DKD-R-6-1
1 kN to 1000 kN 0.41% of Rdg Using Load Cells WithIndicators as per IS1828 (Part I) :2015
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 31 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019
S.No Discipline / Group Quantity Measured/Instrument
Range / Frequency * CalibrationMeasurementCapability(±)
-80 °C to 200 °C 2.5°C Using Standard RTD(Pt 100) withTemperature Calibrator& Indicator byComparison Method(Single Point)
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name DYNAMIC CALIBRATION SYSTEMS, PLOT NO.63, FIRST CROSS STREET, AUDCONAGAR, KATTUPAKKAM, CHENNAI., CHENNAI, THIRUVALLUR, TAMIL NADU ,INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2390 Page No. : 32 / 32
Validity 31/07/2019 to 30/07/2021 Last Amended on 14/08/2019