ISO9001:2008 Certified FIRE HYDRANTSsffeco.com/pdf/hydrant-ul.pdfSea ng type is resilient material to bronze seat construc on One pumper nozzle, 4.5-4NH thread, Two hose nozzle, 2.5-7.5NH

www.SFFECO.comwww.SFFECO.com

Certified FIREHYDRANTS

ISO9001:2008Cert. 403

SF-F-06 (900)

SF-F-06 (1050)

SF-F-06 (1200)

SF-F-06 (1350)

SF-F-06 (1500)

SF-F-06 (1650)

SF-F-06 (2050)

MODEL

900 mm

1050 mm

1200 mm

1300 mm

1500 mm

1650 mm

2050 mm

3’ - 0”

3’ - 6”

4’ - 0”

4’ - 6”

5’ - 0”

5’ - 6”

6’ - 0”

170 kg.

178 kg.

183 kg.

196 kg.

200 kg.

210 kg.

215 kg.

LENGTH(mm)

LENGTH(feet) WEIGHT

Meets all applicable parts of ANSI/AWWA C502 standard

UL Listed (EX16453) and FM Approved (FM1510)

250 psig working pressure, 400psi tes�ng pressure as per UL-EX 15971

500 psig working pressure, 500 psi test pressure as per FM1510

Secured by the stainless steel safety stem coupling, and hydrant prevent traffic damage by pulling out if hit by a vehicle preven�ng damage to the main valve and stem.

Dual bronze drain ways

Efficient hydraulic design provides op�mum performance and maximum flow.

Threaded and field replaceable hose nozzles and pumper outlet.

Ease of opera�on by an�-fric�on washer and forced lubrica�on

Easily removable main valve from either the bonnet or grounded line flange

360° nozzle sec�on rota�on

Field replaceable nozzles secured with external stainless steel lock screw

Epoxy lined hydrant shoe and nozzle sec�on

DRY BARRELFIRE HYDRANT

Sea�ng type is resilient material to bronze seat construc�on

One pumper nozzle, 4.5-4NH thread, Two hose nozzle, 2.5-7.5NH thread, Other size thread also available.

6” Mechanical Joint designed to ANSI/AWWA C153/A21.53.

CONSTRUCTION:

Front View Detail of Mechanical Joint

Note: Mechanical Joint is Available

upon request; Standard is ANSI

Flange

AHOLD DOWN NUTNon-Corrosive Bronze Nut with integral weather seal, secures the opera�ng nut and prevents unauthorized removal.

O-RINGO-Ring, the hydrant’s an�-fric�on washer assures smooth and easy turning opera�on of the product.

OIL FILL PLUGAllows for easy check and change of the hydrant’s oil and its level without the need of opening the bonnet.

BONNETThe hydrants bonnet or cap is a cast iron single unit preven�ng water entry to safeguard the O-ring and hold opera�ng nut.

BONNET BOLT AND NUTMade of stainless steel as per AISI201 specifica�ons holds the bonnet and the standpipe together.

PUMPER NOZZLE GASKETMade of rubber as per ASTM D2000. The gasket ensures �ght seal of the hydrant pumper nozzle from leakage.

PUMPER NOZZLE The bronze constructed 4” pumper outlet ensures high performance, effec�ve flow of water and reduces fric�on.

PUMPER NOZZLE CAP The cast iron constructed cap ensures protec�on of the nozzle threads and prevents misuse and external damage.

HOSE NOZZLE The two bronze constructed 2.5” hose outlets ensure effec�ve water flow & provides flexible hose connec�on.

DRY BARRELFIRE HYDRANT

of

HOSE NOZZLE GASKETMade of rubber as per ASTM D2000. It ensures �ght seal of the two hydrant hose nozzles from leakage.

HOSE NOZZLE CAP The cast iron constructed cap ensures protec�on of the nozzle threads and prevents misuse and external damage.

CAP CHAIN A heavy duty, special type, looped non-kinking chain is used to enable free opening and closing of the cap.UPPER RODCarbon steel stem provides smooth non-corrosive surface for holding O-rings to the bearing surface.

SAFETY FLANGE BOLT & NUTSafety Flange Bolt and Nut helps to prevent corrosion. They build a strong joint but also are easy to open for any maintenance.

SAFETY COUPLINGHigh strength coupling assures a �ght connec�on to the stem, protec�ng the main barrel from traffic induced damage.

SAFETY FLANGEPermits easy and economical ways of maintenance, addi�oin and change of upper barrel without excava�on.

LOWER RODThe extension of the upper rod downwards from the safety flange to the main valve at the elbow.

STAND PIPECast Iron moulded durable barrel to hold one pumper nozzle and two hose nozzles of required thread sizes.

DRAIN RING HOUSING Made of duc�le iron, it houses the drain ring which helps in reducing the wear and tear due to excessive usage.SEAT RING Seat rings are permanently affixed to the Elbow with the drain ring and O-ring seal, provideing easy seat removal.STEM PIN Stainless steel stem pin rigidly secures the bo�om valve plate of the hydrant to the lower stem.

DRAIN VALVE FACINGUnique pressure ac�vated drain valve assures possi�ve shut-off by �ghtening the seal as per the pressure level.

BOTTOM VALVE PLATEConically designed, epoxy bonded single component compress the drain valve securing it to the lower stem.

DISC RINGCompression type ring for sealing. Rubber made reversible type assures longer life and is convenient to use.

BOTTOM PLATE NUTSealed by a nut gasket, retains the main valve preven�ng corroding of stem threads and is locked by a washer.

ELBOWExtended neck of the Elbow with integral an�-rota�on pads provides for maximum flow and easy connec�on.

Wet Fire Hydrant is used in places where there is no danger of vehicle accidents or freezing atmospheres. It is be�er to be used in malls, shopping centers, colleges, hospitals, etc.

Manufactured in accordance with AWWA C503 Standard

(1) 4.5” Pumper Nozzle, (2) 2.5” Hose Nozzles

Nozzle Threads to NFPA 1963 Standard

Flange to ANSI B16.1, Class 125 (6”). Other types available upon request

Working Pressure:

250PSI for FM approval & 200PSI for UL listed

Working Temperature: 42°F - 180°F

Corrosion protec�on:

Interior and exterior is e-coated to a dry film thickness of 0.6 mils minimum, then fusion bonded epoxy powder coated (FBE).

Note:

Design and material are subject to change without no�ce

WET BARRELFIRE HYDRANT

Model: SFD-250-WH (C) Closed Head

Model: SFD-250-WH (F) Flange Head

SFFECO with its years of experience has always been a progressive organiza�on that has remained in the forefront of the Fire Figh�ng Industry with innova�ve, unconven�onal, environmental friendly, reengineered and unique products.

SFFECO in i ts state-of-the-art manufacturing plants in Riyadh and Dubai works in close connec�ons with renewed governmental and cer�fica�on bodies to provide key answers to the challenges faced by the society. SFFECO brings together over 3 decades of exper�se and experience in form of design, consultancy, installa�on, tes�ng, commissioning, maintenance and refurbishment of the fire protec�ng and fire figh�ng system.

With a large number of highly qualified staff, SFFECO is cer�fied and licensed to supply equipment with its own comprehensive designs, installa�ons, commissioning and maintenance services throughout the GCC, Asian, African and European countries. SFFECO provides excellent a�er sales service and earns utmost customer sa�sfac�on by providing func�onal and technical training and support, and by resolving and troubleshoo�ng issues arising at the client site.

ABOUT SFFECODRY PILLAR FIRE HYDRANT

Conforming to BS EN 14384:2005, & BS 1074 Standards

Avilable with Different type of caps and outlet landing valves

Automa�c drain system drains the water in the upper part when the main valve is closed, thus avoiding damage caused by freezing

Externally sand blasted for smooth finish

Hydrants are designed for high performance and easy to install, maintain and repair. www.SFFECO.com

LPS EN 14384:2005Cert. 1280Ba Size

:

4” & 6”

With/

Without

Break Away

System

Straight

or

90° Inlet

Connection

Model

100SFH680-LPDIB

100SFH1325-LPDI

150SFH1080-LPDI

150SFH680-LPDIB

Inlet

4”

4”

6”

6”

LPCB Ref. No.

1280Ba/01

1280Ba/02

1280Ba/03

1280Ba/04Hose Outlet : 2 x 2.5” BSP (65mm)Pumper : 1 x 4” BSP (100mm)

www.SFFECO.com

Factory - Riyadh2nd Industrial Area, Al-Kharj Road, Riyadh, KSAP.O. Box: 4441, Riyadh 14334Tel : +966 11 2650070, Fax: +966 11 2652190E-mail: [email protected]

SFFECO Global - DubaiP.O. Box: 261318, JAFZA South, Dubai U.A.E.Tel: +971 4 880 9890, Fax: +971 4 880 9822E-mail: [email protected]

Jeddah BranchP.O. Box: 16769, Jeddah – 21474, KSATel : +966 12 670 6009, Fax: +966 12 676 0307E-mail: [email protected]

Madinah BranchTel : 0148660959, 0148283256, Fax: 0148660969E-mail: [email protected]

In line with our policy of con�nuous product improvement,SFFECO reserves the right to modify specifica�ons without prior no�ce.

Dammam BranchP.O. Box: 7162, Dammam – 31462, KSATel : +966 13 8351961, Fax: +966 13 8351968E-mail: [email protected]

Don’t Compromise on Fire Safety…Choose Certified Quality Products…