ISO Methods - Standards Certificati · 5 ISO Methods ISO Method ISO 3924:2010 Petroleum products - Determination of boiling range distribution - Gas chromatography method ISO 3924:2010
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
5
ISO Methods
www.cpachem.com
ISO M
ethod
ISO 3924:2010Petroleum products - Determination of boiling range distribution - Gas chromatography method
ISO 3924:2010 specifies a method for the determination of the boiling-range distribution of petroleum products.ISO 3924:2010 has successfully been applied to samples containing biodiesel up to 10%.
ISO 6488 :1996Water quality - Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes - Gas chromatographic method after liquid-liquid extraction.
Describes a method for determining certain organochlorine insecticides, polychlorinated biphenyls (PCBs) and chlorobenzenes (except the mono- and dichlorobenzenes) in drinking water, ground water, surface waters and waste waters. The method is applicable to samples containing up to 0,05 g/l of suspended solids.
Solvent : Iso-Octane ampoule 1 ml 10 µg/ml Ref : F109230 Price : BEF ISO 7981-1:2005
Water quality - Determination of polycyclic aromatic hydrocarbons (PAH) - Part 1: Determination of six PAH by high-performance thin-layer chromatography with fluorescence detection after liquid-liquid extraction
Specifies the determination of six selected polycyclic aromatic hydrocarbons (PAH) in drinking water. The 6 PAH are: fluoranthene, benzo[b]fluoranthene, benzo[a]pyrene, benzo[k]fluoranthene, indeno[1,2,3-cd]pyrene, and benzo[ghi]perylene.
Solvent : Acetonitrile ampoule 5 ml Ref : F109250 Price : EF ISO 7981-2:2005
Water quality - Determination of polycyclic aromatic hydrocarbons (PAH) - Part 2: Determination of six PAH by high-performance liquid chromatography with fluorescence detection after liquid-liquid extraction.
ISO 7981-2:2005 specifies the determination of six selected PAH in drinking, mineral and table waters and ground and surface waters in mass concentrations above 0,005 micrograms per litre by high-performance liquid chromatography with fluorescence detection after liquid-liquid extraction. The six PAH are: fluoranthene, benzo[b]fluoranthene, benzo[a]pyrene, benzo[k]fluoranthene, indeno[1,2,3-cd]pyrene, and benzo[ghi]perylene. With some modification, this method is also applicable for the analysis of moderately polluted waste waters.
Solvent : Acetonitrile ampoule 5 ml 10 µg/ml Ref : F109260 Price : EF ISO 8165-1:1992
Water quality - Determination of selected monovalent phenols -- Part 1: Gas-chromatographic method after enrichment by extraction.
This international method specifies a method for determining phenols by a gas chromatographic method. The determination of selected phenols and nitrophenols in drinking water, ground water and surface water. The method provides a procedure for solid-phase extraction of nitrophenols, followed by solvent elution, derivatization with diazomethane and determination by gas chromatography and mass spectrometry.
Phenol Internal Standard Stock Solution - 1 component
Solvent : Methanol purge & trap ampoule 1 ml 100 µg/ml Ref : F109270 Price : KA
www.cpachem.com
ISO
Met
hod
7
ISO 8165-2 :1999
Water quality - Determination of selected monovalent phenols - Part 2: Method by derivatization and gas chromatography
This international method specifies a method for the determination of phenols by gas chromatography, following pentafluorobenzoyl chloride derivatization. It may in particular be applied to the examination of drinking water, ground water and moderately contaminated surface water. With this method, lower limits of detection may be obtained compared with extraction procedures.
Solvent : Methanol purge & trap ampoule 1 ml 300 µg/ml Ref : F109300 Price : BBA ISO 9377-2 :2000
Water quality - Determination of hydrocarbon oil index - Part 2: Method using solvent extraction and gas chromatography
The method of choice for the determination of oil and grease in water is based on extraction wit hydrocarbon solvent like pentane or hexane.
This test determines the hydrocarbon oil index in water by means of gas chromatography. The method is suitable for surface water, waste water, and water from sewage treatment plants, and allows the determination of the hydrocarbon oil index in concentrations above 0.1 mg/l.
The index is the sum of compounds with retention times between n-decane and n-tetracontane. Substances complying with this definition are long-chain or branched aliphatic, alicyclic, aromatic or alkylsubstituted aromatic hydrocarbons.
ISO 9377-2 :Mod
Water quality -Determination of hydrocarbon oil index down to C7 A modified method for oil in water analysis of produced water from offshore petroleum production installations
has recently been taken into force. ISO 9377-2 is not applicable for volatile hydrocarbons, and a modification of the method is proposed by the OSPAR commission in order to include the determination of certain hydrocarbons with boiling points between 98 and 174 ºC from produced water.
The OSPAR Reference Method of Analysis for the Determination of the Dispersed Oil Content in Produced Water.
ISO M
ethod
Mixture of Mineral Oils (A+B) (Diesel Fuel / Lubricating Oil) : 1/1(neat) - 2 components
Mineral Oil 50% CAS:8042-47-5 Diesel Oil 50% N/A (id : 381)
ampoule 1 ml Ref : F109631 Price : DF ampoule 5 ml Ref : F061945 Price : KJ Calibration Mixture of Mineral Oils (A+B) Set - 2 components
Ampoule 1 Blank n-Hexane Ampoule 4 Mineral Oil CAS : 8042-47-5 + Diesel Oil 0.6 mg/ml each Ampoule 2 Mineral Oil CAS : 8042-47-5 + Diesel Oil 0.2 mg/ml each Ampoule 5 Mineral Oil CAS : 8042-47-5 + Diesel Oil 0.8 mg/ml each Ampoule 3 Mineral Oil CAS : 8042-47-5 + Diesel Oil 0.4 mg/ml each Ampoule 6 Mineral Oil CAS : 8042-47-5 + Diesel Oil 1.0 mg/ml each
Solvent : n-Hexane 6 ampoules X 1 ml Ref : F061955 Price : EF 6 ampoules X 5 ml Ref : F109681 Price : BDA
www.cpachem.com
8
Quality Control Standard of Mineral Oils - 2 components
Mineral Oil CAS:8042-47-5 Diesel Oil N/A (id : 381)
Solvent : Acetone 500 µg/ml each Ref : P858050 Price : DF ampoule 5 ml 500 µg/ml each Ref : F109641 Price : KJ
ampoule 1 ml
ampoule 1 ml 1 000 µg/ml each Ref : F061965 Price : DF ampoule 5 ml 1 000 µg/ml each Ref : F145091 Price : KJ Solvent : n-Hexane ampoule 1 ml 5 000 µg/ml each Ref : P858010 Price : DF ampoule 5 ml 5 000 µg/ml each Ref : F109661 Price : KJ ampoule 1 ml 10 000 µg/ml each Ref : F061975 Price : DF ampoule 5 ml 10 000 µg/ml each Ref : F109671 Price : KJ Florisil Cartridge QC Standard Mixture - 2 components
Mineral Oil CAS:8042-47-5 Diesel Oil N/A (id : 381)
Solvent : n-Hexane ampoule 1 ml 1 000 µg/ml each Ref : P858090 Price : DA ampoule 5 ml 1 000 µg/ml each Ref : F109651 Price : FF Extraction Solvent Stock Solution - 2 components
n-Decane (C10) CAS:124-18-5 20 µl/l n-Tetracontane (C40) CAS:4181-95-7 20 mg/l Solvent : n-Hexane ampoule 1 ml Ref : P858570 Price : DA ampoule 10 ml Ref : F109741 Price : FE Solvent : n-Hexane/Petroleum ether (1/1) ampoule 1 ml Ref : P858530 Price : DA ampoule 10 ml Ref : F109751 Price : FE Stearyl Stearate Test Solution – 1 component
ISO 9562 :2004Water quality - Determination of absorbable organically bound halogens (AOX)
This European standard specifies a method for the direct determination of an amount of more than 10 microgram/l in water of organically bound chlorine, bromine and iodine (expressed as chloride) absorbable on activated carbon. The concentration of inorganic chloride ions in the test sample (see clause 8) needs to be less than 1 g/l. Samples with higher concentrations need to be diluted prior to analysis. For samples containing suspended solids, halogens adsorbed onto the solid matter are also included.
Solvent : Water ampoule 1 ml 1 104 µg/ml Ref : F128991 Price : BH
ISO 10301 :1997Water quality - Determination of highly volatile halogenated hydrocarbons - Gas-chromatographic methods
This International Standard specifies two methods for the determination of highly volatile halogenated hydrocarbons in drinking water, ground water, swimming pool water, most rivers and lakes and many sewage and industrial effluents using gas chromatography.
ISO 10382:2002Soil quality - Determination of organochlorine pesticides and polychlorinated biphenyls - Gas-chromatographic method with electron capture detection
Specifies a method for quantitative determination of seven polychlorinated biphenyls and seventeen organochlorine pesticides in soil. ISO 10382:2002 is applicable to all types of soil.
ISO 10695 :2000Water quality - Determination of selected organic nitrogen and phosphorus compounds - Gas chromatographic methods
This International Standard specifies two methods for the determination of certain organic nitrogen and phosphorus compounds in waters by gas chromatography.
NCC / OPP Standard Solution - 12 componentsAtrazine CAS:1912-24-9Cyanazine CAS:21725-46-2Metazachlor CAS:67129-08-2Parathion-ethyl CAS:56-38-2
Solvent : Acetone ampoule 10 ml 10 µg/ml Ref : F128971 Price : EF
ISO 11369:1997Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction
This International Standard describes a method for the determination of organic plant treatment agents in drinking and ground water using high performance liquid chromatography (HPLC) with UV detection after solid-liquid extraction.
Solvent : Acetonitrile ampoule 10 ml 10 µg/ml Ref : F129021 Price : EF
ISO 11423-2:1997Water quality - Determination of benzene and some derivatives - Part 2: Method using extraction and gas chromatography
The method described is applicable to the determination of benzene, methylbenzene (toluene), dimethylbenzenes (xylenes) and ethylbenzene (abbreviated hereafter to BTX) in water and waste water in concentrations above 5 μg/l. High concentrations may be determined by diluting the extract. A number of further derivatives and nonpolar compounds with similar boiling points may also be determined by this method.
ACs Internal Standard Solution - 1 componentToluene D8 CAS:2037-26-5
Solvent : Acetone ampoule 1 ml 50 µg/ml Ref : F129011 Price : BK
ISO 14154:2005Soil quality - Determination of some selected chlorophenols - Gas chromatographic method with electron-capture detection
ISO 14154:2005 describes the gas chromatographic determination of 15 chlorophenols in soil samples. This method can also be applied to other solid samples such as sediments and solid wastes.
ISO 14154:2005 describes an acid-base liquid extraction, followed by acetylation and then liquid/liquid extraction. Determination of mass concentrationis then carried out by gas chromatography and electron-capture detection.
Solvent : Ethanol ampoule 1 ml Ref : F109901 Price : CBA ISO 15009:2002
Soil quality - Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons - Purge-and-trap method with thermal desorption
Internal Stock Standard Solution for aromatic hydrocarbons - 2 components
Water quality - Gas chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption
ISO 15680:2003 specifies a general method for the determination of volatile organic compounds (VOCs) in water by purge-and-trap isolation and gas chromatography (GC). ISO 15680:2003 is applicable to drinking water, ground water, surface water, seawater and to (diluted) waste water.
ACs Internal Stock Standard Solution - 4 components
Animal and vegetable fats and oils - Determination of polycyclic aromatic hydrocarbons ISO 15753:2006 describes two methods for the determination of 15 polycyclic aromatic hydrocarbons (PAHs) in
animal and vegetable fats and oils: a general method, and a method specific for coconut oil and short-chain vegetable oils. These methods are not quantitative for the very volatile compounds such as naphthalene, acenaphthene and
fluorene. Due to interferences provided by the matrix itself, palm oil and olive pomace oil cannot be analysed using this method.
Multiple Compound Standard Solution - 15 components
Water quality - Determination of selected phenoxyalkanoic herbicides, including bentazones and hydroxybenzonitriles by gas chromatography and mass spectrometry after solid phase extraction and derivatization.
This standard specifies a method for the determination of phenoxyalkanoic acids in ground and drinking water in mass concentrations > 0,05 Вµg/l. The single substances are listed in the above mentioned standard. The method includes a solid-liquid extraction, derivatization and gas chromatography with MS detection.
Phenoxyacetic Herbicides Standard Solution - 10 components
Solvent : Acetone ampoule 1 ml 500 µg/ml Ref : F129041 Price : EE
ISO 17495:2001Water quality - Determination of selected nitrophenols - Method by solid-phase extraction and gas chromatography with mass spectrometric detection
This standard specifies a method for the determination of selected nitrophenols in drinking, grund and surface water in mass concentrations > 0,5 Вµg/l. The method includes extraction, derivatization and gas chromatography. Exact figures on the application ranges are given in the table listing the result from the interlaboratory trial.The method includes the determination of mononitrophenols, methylnitrophenols, and selected chloronitrophenols and methylaged chloronitrophenols.
Phenols Internal Standard Solution - 2 components2,4-Dibromophenol CAS:615-58-7 2,3,6-Trichlorophenol CAS:933-75-5
Solvent : Ethyl Acetate ampoule 1 ml 500 µg/ml Ref : F129051 Price : DJ
ISO 17858:2007Water quality - Determination of dioxin-like polychlorinated biphenyls - Method using gas chromatography/mass spectrometry
ISO 17858:2007 specifies a method for the determination of dioxin-like tetra- to hepta-chlorinated biphenyls (PCBs) in waters and wastewaters (containing less than 1 % suspended solids) using high-resolution gas chromatography/high-resolution mass spectrometry (HRGC/HRMS). The minimum levels at which the dioxin-like PCBs can typically be determined with no interferences present are specified. This method is "performance based". The analyst is permitted to modify the method to overcome interferences or lower the cost of measurements, provided that all performance criteria in this method are met. The requirements for establishing method equivalency are given.
ISO 17993:2002Water quality - Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction
ISO 17993:2002 specifies a method using high performance liquid chromatography (HPLC) with fluorescence detection for the determination of 15 selected polycyclic aromatic hydrocarbons (PAH) in drinking and ground water in mass concentrations greater than 0,005 microgram/litre (for each single compound) and surface waters in mass concentrations above 0,01 microgram/litre.
This method is, with some modification, also suitable for the analysis of waste water.
ISO 18287:2006Soil quality - Determination of polycyclic aromatic hydrocarbons (PAH) - Gas chromatographic method with
mass spectrometric detection (GC-MS)ISO 18287:2006 specifies the quantitative determination of 16 polycyclic aromatic hydrocarbons (PAH) according
to the priority list of the Environmental Protection Agency, USA (EPA, 1982). ISO 18287:2006 is applicable to all types of soil (field-moist or chemically dried samples), covering a wide range of PAH contamination levels. Under the conditions specified in ISO 18287:2006, a lower limit of application of 0,01 mg/kg (expressed as dry matter) can be ensured for each individual PAH.
Solvent : Cyclohexane ampoule 1 ml 100 µg/ml Ref : F062135 Price : FFampoule 1 ml 200 µg/ml Ref : F131381 Price : JA
ISO 18856:2004Water quality - Determination of selected phthalates using gas chromatography/mass spectrometry
This future standard will specify a method for the determination of phthalates in water after solid phase extraction and gas chromatography - mass spectrometry. The method is applicable to the determination of phthalates (a list of common phthalates is included in ISO/CD 18856) in ground water, surface water, waste water and drinking water in mass concentrations between 0,02 Вµg/l and 0,150 Вµg/l, depending on the individual substance. The applicability of the method to other phthalates not given in the table is not excluded, but shall be verified in each case.
Solvent : Ethyl Acetate ampoule 1 ml 1 000 µg/ml Ref : F129191 Price : DC
ISO 18857-1:2005Water quality - Determination of selected alkylphenols - Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection
This part of ISO 18857 specifies a method for the determination of 4-nonylphenol (mixture of isomers) and 4-(1,1,3,3-tetramethylbutyl)phenol in non-filtered samples of drinking water, ground water and surface water. The method is applicable in a concentration range from 0,005 Вµg/l to 0,2 Вµg/l for 4-(1,1,3,3-tetramethylbutyl)phenol and from 0,02 Вµg/l to 0,2 Вµg/l for 4-nonylphenol (mixture of isomers). Depending on the matrix, the method is also applicable to waste water in a concentration range from 0,1 Вµg/l to 50 Вµg/l. Higher concentrations may be measured after appropriate dilution of the sample.
ISO 23631 :2006Water quality - Determination of dalapon, trichloroacetic acid and selected haloacetic acids - Method using gas chromatography (GC-ECD and/or GC-MS detection) after liquid-liquid extraction and derivatization
ISO 23631:2006 specifies a method for the determination of dalapon, trichloroacetic acid (TCA) and selected haloacetic acids in ground water and drinking water by gas chromatography (GC-ECD and/or GC-MS detection) after liquid-liquid-extraction and derivatization using diazomethane. Depending on the matrix, the method is applicable to a concentration range from 0,5 to 10 micrograms per litre.