ISE 370 Project: Create ISE 370 Project: Create a Machined Part Using a Machined Part Using the Computer Numerically the Computer Numerically Controlled (CNC) Machine Controlled (CNC) Machine Mercer University School of Engineering Industrial Engineering Course Project David Harris (Industrial Engineering) Russell Hazelrig (Industrial Engineering) Chris Meador (Industrial Engineering)
6
Embed
ISE 370 Project: Create a Machined Part Using the Computer Numerically Controlled (CNC) Machine Mercer University School of Engineering Industrial Engineering.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
ISE 370 Project: Create a ISE 370 Project: Create a Machined Part Using the Machined Part Using the Computer Numerically Computer Numerically
Controlled (CNC) MachineControlled (CNC) Machine
Mercer University School of Engineering Industrial Engineering Course Project
David Harris (Industrial Engineering)Russell Hazelrig (Industrial Engineering)
Chris Meador (Industrial Engineering)
Project Goal and SolutionProject Goal and Solution
Develop design of partChoose material (blue wax)Draft dimensioned drawing in AutoCADWrite program using G-codeUse Computer Numerically Controlled
(CNC) Machine to manufacture part Use Coordinate Measuring Machine (CMM)
to check part quality
Student ProjectsDepartment of Industrial Engineering and Industrial Management Slide 2
Dimensioned DrawingDimensioned Drawing
Student ProjectsDepartment of Industrial Engineering and Industrial Management Slide 3
Partial Code for CNC Production Partial Code for CNC Production of Crossof Cross