Installing and configuring Microsoft iSCSI Initiator 2.08, NetApp DSM MPIO 4, NetApp SnapDrive for Windows 6.4.2 and creating an ISCSI lun on the NetApp controller. 1) Install the iSCSi initiator. Download it from here. a. http://www.microsoft.com/en-us/download/details.aspx?id=18986 b. Double-click the Initiator-2.08-build3825-x86fre.exe file > Next > select all options and click Next > I agree with the license and click Next > Finish > the server will automatically reboot. 2) Install Microsoft KB patches: KB919117, KB945119, KB982109, KB931300 and KB937382. a. Note that in the next step to install the DSM MPIO, if any patches are missing it will tell what patches it needs. 3) Install NetApp DSM MPIO. Double-click ntap_win_mpio_4.0_setup_x86.msi > Next > click OK on the ALUA message > accept the license and click Next > enter the license and click Next (check the NetApp support site for your licenses) > use the default system account and click Next > do not install HyperV utilities and click Next > Next > Next > Next > Install > ignore the no FC adapter message, click OK (you aren’t using fiber channel) > Finish > Yes to reboot. 4) Launch and configure the Microsoft iSCSI Initiator. Double-click the Microsoft iSCSI Initiator icon on the desktop. a. On the Discovery tab, under Target portals click Add. Enter the IP address of the NetApp controller NIC that will receive the storage traffic. Click Advanced.
19
Embed
iSCSI on Windows with NetApp - · PDF fileInstalling and configuring Microsoft iSCSI Initiator 2.08, NetApp DSM MPIO 4, NetApp SnapDrive for Windows 6.4.2 and creating an ISCSI lun
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Installing and configuring Microsoft iSCSI Initiator 2.08, NetApp DSM MPIO 4,
NetApp SnapDrive for Windows 6.4.2 and creating an ISCSI lun on the NetApp
controller.
1) Install the iSCSi initiator. Download it from here.
a. http://www.microsoft.com/en-us/download/details.aspx?id=18986
b. Double-click the Initiator-2.08-build3825-x86fre.exe file > Next > select all options and click Next > I
agree with the license and click Next > Finish > the server will automatically reboot.
2) Install Microsoft KB patches: KB919117, KB945119, KB982109, KB931300 and KB937382.
a. Note that in the next step to install the DSM MPIO, if any patches are missing it will tell what patches it
needs.
3) Install NetApp DSM MPIO. Double-click ntap_win_mpio_4.0_setup_x86.msi > Next > click OK on the ALUA
message > accept the license and click Next > enter the license and click Next (check the NetApp support site for
your licenses) > use the default system account and click Next > do not install HyperV utilities and click Next >
Next > Next > Next > Install > ignore the no FC adapter message, click OK (you aren’t using fiber channel) > Finish
> Yes to reboot.
4) Launch and configure the Microsoft iSCSI Initiator. Double-click the Microsoft iSCSI Initiator icon on the desktop.