Is a white cement based – texture finish material for plastered surfaces. Is in dry powdered form, and only water is mixed with it before use. Is available.

•Is a white cement based – “texture finish material for

plastered surfaces”.

•Is in dry powdered form, and only water is mixed

with it before use.

•Is available for three kind of finishes, namely,

Trowel Finish (TF), Roller/Spray Finish (RF).

•Is available in 25 Kg. PP laminated bags.

WHY TEXTURA?

Decorates & protects both interiors & exteriors

Available in wide range of colors, textures & designs

Can be applied on damp walls

Extra adhesive strength unlike other acrylic finishes

Needs no curing

Birla White CementBirla White Cement

Quartz Sand. Quartz Sand.

Inert Mineral Fillers.Inert Mineral Fillers.

Chemical Additive.Chemical Additive.

Being white cement based, it offers a range of benefits, such as

Durable/ permanent finish.

Better adhesiveness, once applied on mortar/ plastered

surface it becomes a part of the surface.

Covers the fine cracks and other minor defects of the

plastered surface.

Has sufficient breath-ability, to breathe out the entrapped

moisture.

SALIENT FEATURES OF TEXTURA

SALIENT FEATURES OF TEXTURA

•Ideal for decoration and protection of Exterior and Interior Walls.

•Relatively economical than acrylic based material.

•Can be applied on moist and damp walls.

•Each finish (Trowel/ Roller/ Spray) offers a variety of textures and

designs.

•The inert mineral filler, white cement and chemical additives make it

water resistant.

SALIENT FEATURES OF TEXTURA

•The eco-friendly materials/ chemicals used in Textura makes it

suitable for all weather conditions.

•Textura is designed to make the finish resistant to microbial

growth.

•There is no health hazard or environmental impact during its

application, therefore, Textura is safe to use.

Roller / Spray Finish

1. Physical state Ready to use Powder Form

2 Pot life 2 hours (approx.)

3 Surface hardness 3 to 4 N

4 Max. thickness 2.5 mm

5 Coverage 6-8 sq. ft. per Kg .-Roller finish

8-10 sq. ft. per kg. -Spray finish

(Depends on Surface)

6 Drying time 2-3 hours, may vary due to change in temperature and humidity

Trowel Finish

1. Physical state Ready to use dry powder form.

2 Pot life 2 hours (approx.)

3 Surface hardness 3 to 3.5 N

4 Max. thickness 3 mm

5 Coverage 4 to 5 sq. ft. per Kg. (Depends on surface)

6 Drying time 2-3 hours, may vary due to change in temperature and humidity

TEXTURATEXTURA ACRYLIC TEXTURESACRYLIC TEXTURES

Water Resistant. Not Water Resistant.

Cement Based – more adhesive strength.

Less Adhesive strength.

Can be applied on moist and damp surfaces.

Only on dry surfaces.

Economical. Relatively Costly.

The surface (wall) should be in line & level.

Use the material within two hours of adding

water.

The roller/spray-gun/ trowel should be cleaned

properly after use.

Keep the dry mix material in dry place and out of

reach of children.

To get water repellant and non-sticky surface,

apply a good quality water-soluble silicone, on

the dry textured surface.