Disclosure to Promote the Right To Information Whereas the Parliament of India has set out to provide a practical regime of right to information for citizens to secure access to information under the control of public authorities, in order to promote transparency and accountability in the working of every public authority, and whereas the attached publication of the Bureau of Indian Standards is of particular interest to the public, particularly disadvantaged communities and those engaged in the pursuit of education and knowledge, the attached public safety standard is made available to promote the timely dissemination of this information in an accurate manner to the public. इंटरनेट मानक “!ान $ एक न’ भारत का +नम-ण” Satyanarayan Gangaram Pitroda “Invent a New India Using Knowledge” “प0रा1 को छोड न’ 5 तरफ” Jawaharlal Nehru “Step Out From the Old to the New” “जान1 का अ+धकार, जी1 का अ+धकार” Mazdoor Kisan Shakti Sangathan “The Right to Information, The Right to Live” “!ान एक ऐसा खजाना > जो कभी च0राया नहB जा सकता ह ै” Bhartṛhari—Nītiśatakam “Knowledge is such a treasure which cannot be stolen” IS 8930-1 (1995): Technical product documentation -vocabulary, Part 1: Terms relating to technical drawings: General and types of drawings [PGD 24: Drawings]
10
Embed
IS 8930-1 (1995): Technical product documentation ...
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Disclosure to Promote the Right To Information
Whereas the Parliament of India has set out to provide a practical regime of right to information for citizens to secure access to information under the control of public authorities, in order to promote transparency and accountability in the working of every public authority, and whereas the attached publication of the Bureau of Indian Standards is of particular interest to the public, particularly disadvantaged communities and those engaged in the pursuit of education and knowledge, the attached public safety standard is made available to promote the timely dissemination of this information in an accurate manner to the public.
इंटरनेट मानक
“!ान $ एक न' भारत का +नम-ण”Satyanarayan Gangaram Pitroda
“Invent a New India Using Knowledge”
“प0रा1 को छोड न' 5 तरफ”Jawaharlal Nehru
“Step Out From the Old to the New”
“जान1 का अ+धकार, जी1 का अ+धकार”Mazdoor Kisan Shakti Sangathan
“The Right to Information, The Right to Live”
“!ान एक ऐसा खजाना > जो कभी च0राया नहB जा सकता है”Bhartṛhari—Nītiśatakam
“Knowledge is such a treasure which cannot be stolen”
“Invent a New India Using Knowledge”
है”ह”ह
IS 8930-1 (1995): Technical product documentation-vocabulary, Part 1: Terms relating to technical drawings:General and types of drawings [PGD 24: Drawings]
IS8930 (Partl):1995 IS0 10209-l : 1992
Indian Standard
TECHNICAL PRODUCT DOCUMENTATION -VOCABULARY
PART 1 TERMS RELATING TO TECHNICAL DRAWINGS: GENERAL AND TYPES OF DRAWINGS
( First Revision )
First Reprint AUGUST 1997
UDC 744’43 : 001’4
@ BIS 1995
BUREAU OF INDIAN STANDARDS MANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARC?
NEW DELHI 110002
feburafy 1995 Price Group 2
Drawings Sectional Committee, LM 02
NATIONAL FOREWORD
This Indian Standard (Part 1) which is identical with IS0 10209-l : 1992 ‘Technical product documentation - Vocabulary : Part 1 Terms relating to technical drawings : General and types of drawings’, issued by the International Organization for Standardization (ISO), was adopted by the Bureau of Indian Standards on the recommendations of the Drawings Sectional Committee (LM 02) and approval of the Light Mechanical Engineering Division Council.
The original version of this standard IS 8930 : 1978 ‘Nomenclature for general engineering drawings was based on DIN 199 Engineering Drawings - Nomenclature’, issued by the Deutsches lnstitut fijr Normung (DIN). International Organization for Standardization has published IS0 10209-l : 1992 ‘Technical product documentation - Vocabulary : Part 1 Terms relating to technical drawings : General and types of drawings’. Harmonization of the Indian Standard has been made by the adoption of IS0 10209-l : 1992.
The English text of IS0 standard has been approved as suitable for publication as Indian Standard without deviations. Certain conventions are, however, not identical to those used in Indian Standards. Attention is particularly drawn to the following:
a) Wherever the words ‘International Standard’ appear referring to this standard, they should be read as ‘Indian Standard’.
b) Comma (J has been used as a decimal marker while in Indian Standards the current practice is to use a point (.) as the decimal marker.
IS 8930(Part1):1995 IS0 10209-l : 1992
Indian Standard
TECHNICAL PRODUCT DOCUMENTATION - VOCABULARY
PART 1 TERMS RELATING TO TECHNICAL DRAWINGS: GENERAL AND TYPES OF DRAWINGS
( First Revision )
1 Scope
This part of IS.0 lOM9 establishes and defines terms used in‘
technical product documentation relating to technical drawings
in all fields of application.
NOTES
1 Terms which are defined elsewhere in this part of IS0 10209 are shown I,, italics.
2 In addition to terms and definitions used in two of the three official
IS0 languages (English and French), this part of IS0 10209 gives the
equivalent terms in the German, Italian and Swedish languages in
annex A; these are published under the responsibility of the member
bodies for Germany (DIN). Italy IUNI) and Sweden (SIS). However,
only the terms and definitions given in the official languages can be
considered as IS0 terms and definitions.
2 General terms
2.1 chart; graph: Graphical presentation, usually within a
coordinate system, expressing the relationship between two or
more variable quantities.
2.2 cut; sectional view: Section showing, in addition,
outlines beyond the cutting plane.
2.3 detail: Representation on a drawing of an item, or part
of an item or an assembly, generally enlarged in order to give
the required information.
2.4 diagram: Drawing in which graphical symbols are used
to indicate the function of the components of a system and
their relationships.
2.5 elevation: VLW on a vertical plane.
2.6 item: Component, part, element or physical feature of
an object represented on a drawing.
2.7 nomogram Charf from which it is possible to determine
without calculation the approximate numerical value of one or more quantifies.
2.8 plan: View, section or cut, in a horizontal plane, seen
from above.
2.9 section : Representation showing only the outlines of an
object lying in one or more cutting planes.
2.10 sketch: Drawing commonly prepared freehand and not
necessarily to scale.
2.11 iechnical drawing; drawing : Technical information, given on an information carrier, graphically presented in accor-
dance with agreed rules and usually to scale.
2.12 view: Orthogonal projection showing the visible part of
an object and also, if necessary, its hidden outlines
3 Types of. drawings
3.1 as-built drawing; record drawing: Drawing used to
record the details of a construction following its completion
3.2 assembly drawing: Drawing representing the relative
position and/or shape of a high-level group of assembled parts
NOTE 3 For groups on a lower structural level, see 3.22
3.3 block plan: Drawing which identifies R site and locates the outlines of construction works ir, relation tr 3 tctwn plar’ nr similar document.
3.4 component drawing: Orating depicting a single corn ponent and which includes all the information required for I+ definition of the component
3.5 component rsnge drawing: Drawing showing rht?
Sizes. System Of reference (type of component and ldenttfa cation number) and performance data of a range of CC”, ponents of a given type.
IS 8930 ( Part 1) : 1995 IS0 10209-l : 1992
3.6 detail drawing: Drawing showing parts of a construc- tion or a component, generally enlarged, and including specific information about the form and construction or about the assembly and joints.
3.7 draft drawing; preliminary drawing: Drawing serving as a basis for the choice of a final solution and/or for discussion between involved parties.
3.8 general arrangement drawing: Drawing showing the layout of construction works, including location, item references and sizes.
3.9 general assembly drawing: Assembly drawing show- ing all groups and parts of a complete product.
3.H) installation drawing: Drawing showing the general configuration of an item and the necessary information to in- stall the item relative to its mating structures or associated items.
3.11 interface drawing : Drawing giving information for the assembty and matching of two parts, concerning, for example, their dimensions, configuration limitations, performance and test requirements.
3.12 item list: Complete list of the items constituting an assembly (or a sub-assembly), or of detailed parts presented on a drawing.
3.13 layout drawing; location drawing : Drawing showing the location of sites, structures, buildings, spaces, elements, assemblies or components.
3.14 origlnal drawing: Drawing giving the currently ap- proved information or data and on which the latest revision has been recorded.
3.15 outline drawing: Drawing giving the outside
peripheral envelope, overall dimensions and mass of an object.
used in the determination of packaging, transportation and in
stallation requirements.
3.18 part drawing: Drawing depicting a single part (which
cannot be further disassembled) and which includes all the necessary information required for the definition of the part
3.17 partial arrangement drawing: Drawing showing a
delimited part of a general arrangement drawing* usually lo a
larger scale and giving supplementary information.
3.18 pattern drawing : Drawing depicting a pattern made of
wood, metal or other material, around which moulding mater14
IS placed to make a mould for castings.
3.19 production drawing: Drawfng, generally establlshed
on the basis of the design data, giving all the informatton re-
quired for the production.
3.29 tabular drawing: Drawing showing parts with similar
form but different features.
3.21 site plan: Location drawing giving the position of con
struction works in relation to the setting out points, the means
of access and the general layout of a site. It may a!so contain in-
formation on service networks, roadworks and the landscape.
3.22 sub-assembly drawing: Assembly drawing on a lower
structural level showing only a limited number of groups.or
section sectional view site plan sketch sub-assembly drawing
N
nomogram 2.7 tabular drawing technical drawing
0 E
original drawing, ................. 3.14 outline drawing .................. 3.15 view ...........
2.9 2.2 3.21 2.10 3.22
3.20 2.11
2.12
4
Bureau of Indian Standards
BIS is a statutory institution established under the Bureau of hdiutz Standards Acf, 1986 to promote harmonious development of the activities of standardization, marking and quality certification of goods and attending to connected matters in the country.
Copyright
BIS has the copyright of all its publications. No part of these publications may be reproduced in any form without the prior permission in writing of BIS. This does not preclude Ihe free use, in the course ol implementing the standard, of necessary details, such as symbols and sizes, type or grade dcsign;ttions. Enquiries relating to copyright be addressed to the Director (Publication), BIS.
Review of Indian Standards
Amendments are issued to standards as the need arises on the basis of comments. Standards arc also reviewed periodically; a standard along with amendments is reaffirmed when such review indicates that no changes arc needed; if the review indicates that changes are needed, it is taken up for revision. Users of Indian Standards should ascertain that they are in possession of the latest nmcndmcnts or edition by referring to the latest issue of ‘BIS Handbook’ and ‘Standards Monthly Additions’.
This Indian Standard has been developed from Dot: No. LM 02 C 0209 ).
Amend No.
Amendments Issued Since Publication
Date of Issue Text Affected
Headquarters: BUREAU OF INDIAN STANDARDS
Manak Bhavan, 9 Bahadur Shah Afar Marg, New Delhi 110002 Telegrams: Manaksanstha Telephones: 323 0131,323 33 75,323 94 02 (Common to all offices)
Regional Offices: Tclephonc
‘Central :
Eastern :
Northern :
Southern :
Western :
Branches :
Manak Bhavan, 9 Bahadur Shah Zafar Marg NEW DELHI 110002
32376 17,3233X41
l/l4 C.I.T. Scheme VII M, V.I.P. Road, Maniktola CALCUlTA 700054