Disclosure to Promote the Right To Information Whereas the Parliament of India has set out to provide a practical regime of right to information for citizens to secure access to information under the control of public authorities, in order to promote transparency and accountability in the working of every public authority, and whereas the attached publication of the Bureau of Indian Standards is of particular interest to the public, particularly disadvantaged communities and those engaged in the pursuit of education and knowledge, the attached public safety standard is made available to promote the timely dissemination of this information in an accurate manner to the public. इंटरनेट मानक “!ान $ एक न’ भारत का +नम-ण” Satyanarayan Gangaram Pitroda “Invent a New India Using Knowledge” “प0रा1 को छोड न’ 5 तरफ” Jawaharlal Nehru “Step Out From the Old to the New” “जान1 का अ+धकार, जी1 का अ+धकार” Mazdoor Kisan Shakti Sangathan “The Right to Information, The Right to Live” “!ान एक ऐसा खजाना > जो कभी च0राया नहB जा सकता ह ै” Bhartṛhari—Nītiśatakam “Knowledge is such a treasure which cannot be stolen” IS 4753 (2008): Potassium Nitrate, Food Grade [FAD 8: Food Additives]
11
Embed
IS 4753 (2008): Potassium Nitrate, Food GradeIS 4753:2008 Indian Standard POTASSIUM NITRATE, FOOD GRADE — SPECIFICATION (Second Revision) ICS 67.220.20 (3 BIS 2008 BUREAU OF INDIAN
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Disclosure to Promote the Right To Information
Whereas the Parliament of India has set out to provide a practical regime of right to information for citizens to secure access to information under the control of public authorities, in order to promote transparency and accountability in the working of every public authority, and whereas the attached publication of the Bureau of Indian Standards is of particular interest to the public, particularly disadvantaged communities and those engaged in the pursuit of education and knowledge, the attached public safety standard is made available to promote the timely dissemination of this information in an accurate manner to the public.
इंटरनेट मानक
“!ान $ एक न' भारत का +नम-ण”Satyanarayan Gangaram Pitroda
“Invent a New India Using Knowledge”
“प0रा1 को छोड न' 5 तरफ”Jawaharlal Nehru
“Step Out From the Old to the New”
“जान1 का अ+धकार, जी1 का अ+धकार”Mazdoor Kisan Shakti Sangathan
“The Right to Information, The Right to Live”
“!ान एक ऐसा खजाना > जो कभी च0राया नहB जा सकता है”Bhartṛhari—Nītiśatakam
“Knowledge is such a treasure which cannot be stolen”
“Invent a New India Using Knowledge”
है”ह”ह
IS 4753 (2008): Potassium Nitrate, Food Grade [FAD 8: FoodAdditives]
IS 4753:2008
Indian Standard
POTASSIUM NITRATE, FOOD GRADE —SPECIFICATION
(Second Revision)
ICS 67.220.20
(3 BIS 2008
BUREAU OF INDIAN STANDARDSMANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG
NEW DELHI 110002
April 2008 Price Group 3
Food Additives Sectional Committee, FAD 8
FOREWORD
This Indian Standard (Second Revision) was adopted by the Bureau of Indian Standards, after the draftfinalized by the Food Additives Sectional Committee had been approved by the Food and Agriculture DivisionCouncil,
With the increased production of processed foods, manufacturers have started adding a large number ofsubstances, generally in small quantities, to improve the appearance, flavour, texture or storage properties of theprocessed foods. As impurities in these substances have been found to be harmful, it is necessary to have a strictquality control of these food additives. Potassium nitrate, is widely used as a preservative in meat and meatproducts and is permitted ~nder the Prevention of Food Adulteration Rules, 1955. This compound is known tohave some toxicity. This standard would help in checking purity which requires to be checked at the stage ofmanufacture, for it is extremely difficult (and in many cases impossible) to detect the impurity once thesesubstances are added to the processed foods.
This s[andard was first published in 1968 and later revised in 1997 based on the then existing JECFASpecification and EEC standards. This standard is being revised taking into consideration the latest publicationfor polassiu]n nitrate issued by JECFA. In this revision, the limit for nitrite content has been made mores~ringcnt to align with the international requirements and corresponding method of test has also been revisedand updated.
I)ue considerateion has also been given to the Prevention of Food Adulteration Rules, 1955 and Standard ofIlei,qht.v & Measures (Packaged Commodities) Rules, 1977. However, this standard is subject to restrictionsimposed under these, wherever applicable. .
For the purpose of deciding whether a particular requirement of this standard is complied with, the final value,observed or calculated, expressing the result of a test or analysis, shall be rounded off in accordance withIS 2: 1960 ‘Rules for rounding off numerical values (revised)’. The number of significant places retained in therounded off value should be the same as that of the specified value in this standard.
IS 4753:2008
Indian Standard
POTASSIUM NITRATE, FOODSPECIFICATION
(Second Revision)
1 SCOPE
This standard prescribes the requirements andmethods of sampling and test for potassiumnitrate, food grade.
2 REFERENCES
The following standards contain provisions whichthrough reference in this text, constitute provisionsof this standard. At the time of publication, theeditions indicated were valid, All dandards areshje~i 10nwisionandpartiesto agreementsbasedonthis standard are encouraged to investigate thepossibility of applying the most recent editions of thestandards indicated below:
IS No. Title
265:1993 Hydrochloric acid (@@h revision)
266 ~ 1993 Sulphuric acid (third revision)
1070:1992 Reagent grade water (third revision)
1699:1995 Methods of sampling and test forfood colours (second revision)
Potassium nitrate shall be colorless, odourlessand shall have a salty taste. It shall be in the formof transparent prisms or white granules or acrystalline powder. It shall produce a coolingsensation in the mouth and shall be slightlyhydroscopic in moist air. The material is soluble inwater and slightly soluble in ethanol and glycerol.
NOTE — The solubiiity is intended only as information regarding
approximatevolubilityand is not considered as a qualityrequirement and is of minor significance as a means of
identification or determination of purity and dependence must be
placed on other specifications.
3.2 Identification Tests
3.2.1 Aqueous solution of the material shall beneutral to litmus.
GRADE —
3.2.2 Ten percent solution shall give positive testfor potassium given in 3.2.2.1 and positive test fornitrate given in 3.2.2.2.
3.2.2.1 Test for potassium
When to a neutral 10 percent solution of thematerial sodium bitartarate is added, a white precipitateshall be formed. This precipitate shall be soluble inammonia and in solutions of alkali hydroxide orcarbonates.
3’2.3a)
b)
c)
Tesffor NitrateWhen the solution is mixed with an equalvolume of ss.dphuric acid, the mixture cooled,and a solution of ferrous sulphate superimposed,a brown colour shall be produced at the junctionof the two liquids.
When the solution is heated with sulphuricacid and metallic copper, brownish red fumesshall be evolved.
The solution shall not decolourize acidifiedpotassium permanganate solution (distinctionfrom nitries).
3.3 The material shall also conform to the requirementsgiven in Table 1.
3.4 The product shall be processed, packed, storedand distributed under hygienic conditions in licencedpremises (see IS 2491).
4 PACKING, STORAGE AND MARKING
4.1 Packing
The material shall be securely packed in well-filledcontainers with minimum access to air. The containersshall be such as to preclude contamination of thecontents with metals or other impurities.
4.2 Storage
The material shall be stored in a cool and dry place soas to avoid excessive exposure to heat.
4.3 Marking
Each container shall be legibly and indelibly markedwith the following information:
a) Name of the material including the words ‘FoodGrade’;
1
IS 4753:2008
Table 1 Requirements for Potassium Nitrate
(Clause 3.3)
SINo. Characteristic Requirement Method of Test, Ref to
fA
\Annex of this Clause of
Standard IS 1699
(1) (2) (3) (4) (5)
O
Ii)
Iii)
iv)
v)
vi)
wi)
viii)
lx)
Purity as KNO, percent by mass, L4in
Moisture, percent by mass, Mux
Matter insoluble in water
Chlorates
Sulphates (as KZSO,), percent by mass, Max
Arsenic (as As), m@g, MUX
Lead (as Pb), mglkg, Mux
Heavy metals, mg/kg, Max
Nitrite, mg/kg, Max
99
1
To pass the test
To pass the test
0.10
3
10
20
20
A
B
c
D
E
—
F
G
—
—
—
—
15
15
b)
c)
d)
e)
9
~)h)
j)
4.3.1
Source of mamtfacture;
Name and address of the manufacturer;
Date of manufacture;
Batch or Code number;
Net content when packed;
Instruction for storage;
Best before date (Month and Year to be givenby the manufacturer); and
Any other requirements as given under theStandards of Weights and Measures (PackagedCommodities) Rules, 1977 and Prevention ofFood Adulteration Act, 1955 and Rules.
BIS Certl’cation Marking
The product may also be marked with the StandardMark.
4.3.1.1 The use of the Standard Mark is governedby the provisions of the Bureau of IndianStandards Act, 1986 and the Rules and Regulationsmade thereunder. The details of conditions underwhich the licence for the use of the Standard Markmay be granted to manufacturers or producers may beobtained from the Bureau of Indian Standards.
5 SAMPLING
Representative samples of the material shall be drawnaccording to the method prescribed in 4 of IS 1699.
6 QUALITY OF REAGENTS
Unless specified otherwise, pure chemicals anddistilled water (see IS 1070) shall be employed in tests.
NOTE — ‘Pure chemicals’ shall mean chemicals that do not
contain impurities which affect the experimental results.
ANNEX A
[Table 1, S2No. (i)]
DETERMINATION OF PURITY
A-1 REAGENTS
A-1. I Hydrochloric Acid
A-1.2 Silver Nitrate, 0.1 N.
A-1.3 Nitric Acid
A-1.4 Nitrobenzene
A-1.5 Ferric Ammonium Sulphate Solution —Dissolve 8 g of ferric ammonium thiosulphate
2
[Fe(NH,)2,12H20] in sufficient water to make100 ml.
A-1.6 Ammonium Thiocyanate, 0.1 N.
A-2 PROCEDURE
A-2.1 Weigh accurately about 400 mg of the materialpreviously dried at 105°C for 4 h, dissolve in 10 mlof hydrochloric acid in a small beaker or porcelaihdish, and evaporate to dryness on a steam-bath.
*
. . -------
IS 4753:2008
Dissolve the residue in 10 ml of hydrochloric acid, nitrobenzene and shake vigorously. Add ferricand again evaporate to dryness continuing the heat ammonium sulphate solution and titrate the excessuntil the residue, when dissolved in water is neutral to silver nitrate with 0.1 N ammonium thiocyante.litmus. Transfer the residue with the aid of 20 ml of Each ml of 0.1 N silver nitrate is equivalent towater to a glass-stoppered flask, add 3 ml of 10.11 mg of KNO,.
9
ANNEX B
[Tab/e 1, S/ No. (ii)]
DETERMINATION OF MOISTURE
B-1 APPARATUS in a tared weighing bottle. Distribute the sample as
B-1. 1 Oven — Maintained at 105 + l“C.evenly as practicable to a depth of about 5 mm. Placethe bottle containing the sample (uncovered) in the
B-1.2 Weighing Bottle — Glass-stoppered, shallow. oven maintained at105 + 1“C. Remove the bottle fromthe oven after 2 h, close the bottle promptly, allow it to
B-2 PROCEDURE come to room temperature in a desiccator. Weigh.
B-2. 1 Weigh accurately 2 g of the powdered sample B-2.2 Calculate the loss on drying, percent by mass.
ANNEX C
[Table 1, S1 No. (iii)]
DETERMINATION OF WATER INSOLUBLE MATTER
C-1 PROCEDURE all soluble matter and dry at 105 to 110”C to
Dissolve about 2 g of accurately weighed sampleconstant mass. The material shall be considered tohave passed the test if the residue is not more than
in 100 ml of water. Filter through a tared filter 1 mg.paper, wash the residue thoroughly to free it from
3
m
1S 4753:2008
ANNEX D
[Table 1, S1No. (iv)]
TEST FOR CHLORATE
D-1 REAGENT D-2.2 The material shall be considered to have
D-1.1 Concentrated Sulphuric Acid — Conformingpassed the test, if there is no detonation or no
to 1S266.evolution of yellow fumes.
D-2 PROCEDURE
D-2. 1 Heat about 1.0 g of the prepared sample with1.0 ml of concentrated sulphuric acid.
ANNEX E
[Table 1, S1No. (v)]
TEST FOR CHLORATE
E-1 REAGENTS
E-1.1 Concentrated Hydrochloric Acid —Conforming to 1S 265.
Weigh accurately about 5 g of the prepared sampleand dissolve in 50 ml of water. Add 15 ml ofconcentrated hydrochloric acid and evaporate thesolution to dryness. Moisten the residue with 10 ml ofdilute hydrochloric acid, dilute to 200 ml with waterand fiIter, if necessary. Heat the solution to boiling
and drop by drop 10 ml of barium chloride solution.Boil the solution for 15 min and then allow tostand for 4 h, Filter through a tared Gooch crucible.Wash the precipitate thoroughly with hot water till freefrom chlorides and dry to constant mass at 105 tollo”c.
E-3 CALCULATION
74.65 X M,E-3.1 Sulphates (as K,SO,), =
percent by mass M2
where
M, = mass of the precipitate obtained, in g; and
Mz = mass of the prepared sample taken for the test,in g.
ANNEX F
[Table 1, S1No. (viii)]
TEST FOR HEAVY METALS
F-1 PROCEDURE water meets the requirements of the heavy metal
A solution of 1 g potassium nitrate in 10 ml oftest as given in Annex J of IS 4447 using 10 yg oflead (Pb) ion in the control (Solution A).
4
........... . .... . .—... . . “..... .
m
IS 4753:2008
ANNEX G
[Table 1, S1 No. (ix)]
DETERMINATION OF NITRITE
G-1 PRINCIPLE
A spectrophotometric determination using areaction between nitrite, sulphanilamide andN-( 1-naphthyl) ethylenediamine dihydrochloride toproduce a pink coloured complex which is measuredby its absorbance at 540 nm.
G-2 REAGENT
G-2.1 Sulphanilamide Solution — Dissolve 2 g ofsulphanilamide in 1 000 ml dilute hydrochloricacid.
G-2.2 Coupling Reagent — Dissolve 0.2 g ofN-( 1-naphthyl)-ethy lene-diamine dihydrochloridein water and dilute to 100 ml. Keep the reagent in
a brown bottle In a rel+lgerator.
G-2.3 Nitrite Standard — Dissolve 0.750 g ofsodium nitrite (previously dried for 4 h over silicagel) in water and dilute to 1 000 ml (500 ~gnitrite/ml). Dilute 10 ml of this stock solution to100 ml with water (50 mg nitrite/ml). Finally dilute10 ml of this preparation to 1000 ml with water(0.5 mg nitrite/ml).
G-3 PROCEDURE
G-3.1 Standard Curve
Pipette into 100 ml volumetric flasks O, 5, 10, 20 and50 ml of nitrite standard (corresponding to O, 2,5, 5,
10 and 25 mg of nitrite) and dilute to about 80 ml withwater. Add to each of the flasks 10ml of sulphanilamidesolution and mix. After 3 min add 1 ml of couplingreagent, dilute to mark with water, mix and let standfor 15 min. Measure the absorbance of the solutionsagainst water at 540 run using 10 mm cuvettes. Drawa standard curve with the absorbance as a function ofamount of nitrite (it shall be a straight line).
G-3.2 Sample
Accuratelyweigh about 1 g of the sample to thenearest 0.001 g. Dissolve in water and dilute to100 ml. Pipette 20 ml into a 100 ml volumetric flaskand dilute to about 80 ml with water. Add 10 ml ofsulphanilamide solution and mix. After 3 min add1 ml of coupling reagent, dilute to m~k whh w~h?r,mix and let stand for 15 min. Measure the absorbanceof the solution against water at 540 nm using 10 mmcuvettes. Read on the standard curve the amount ofnitrite corresponding to the actual absorbance.
G-4 CALCULATION
~x5n@kgContent of nitrite =
wwhere
A = amount of nitrite read from the standardcurve, in g pg; and
W= weight of sample.
?
Bureau of Indian Standards
BIS is a statutory institution established under the Bureau of Indian Standarh Act, 1986 to promoteharmonious development of the activities of standardization, marking and quality certification of goods andattending to connected matters in the country.
[Copyright !
BIS has the copyright of all its publications. No part of these publications may be reproduced in any form 1
without the prior permission in writing of BIS. This does not preclude the free use, in the course of implementingthe standard, of necessary details, such as symbols and sizes, type or grade designations. Enquiries relating tocopyright be addressed to the Director (Publications), BIS.
Review of Indian Standards
Amendments are issued to standards as the need arises on the basis of comments. Standards are also reviewedperiodically; a standard along with amendments is reaffmed when such review indicates that no changes areneeded; if the review indicates that changes are needed, it is taken up for revision. Users of Indian Standards
i~
should ascertain that they are in possession of the latest amendments or edition by referring to the latest issue of‘BIS Catalogue’ and’ Standards; Monihiy Additions’,
his Indian Standard has been developed from Dot: No. FAD8 (1583).
Amendments Issued Since Publication
Amend No. Date of Issue Text Affected
BUREAU OF INDIAN STANDARDS
Headquarters:
Manak Bhavan, 9 Bahadur Shah Zafar Marg, New Delhi 110002Telephones: 23230131,23233375,2323 9402 website: www.bis.org.in
Regional Offices: Telephones
Central :
Eastern :
Northern :
Southern :
Western :
Branches :
Manak Bhavan, 9 Bahadur Shah Zafar Marg{
23237617NEW DELHI 110002 23233841
1/14 C. LT.Scheme VII M, V.I.P. Road, Kankurgachi{