FEATURING: • Steam Turbine Generator • Additional Fuel Intake System • Dust Suppression • Transformers and Switch Gear • Wood Pellet Hammer Mills • Mobile Plant and Vehicles • Circuit Breaker and Relays For further details on technical specification or to arrange an inspection contact: LEIGH MCCARRON Telephone: +44 (0) 7901 502682 Email: [email protected]LOCATION: Ironbridge, Shropshire, United Kingdom EQUIPMENT FROM EQUIPMENT FROM THE CLOSURE OF THE CLOSURE OF IRONBRIDGE POWER IRONBRIDGE POWER STATION STATION AUCTIONS • Air Compressors • A substantial quantity of Turbine spares including spare LP, HP and IP rotors • Machine Shop, Spare Parts and Accessories Equipment • Conveyors, Hoppers, Silos, Tanks and other Transfer Equipment • Gantry Cranes • Railway Lines • Water Treatment Plant and Large Capacity Water Pumps PRIVATE PRIVATE FOR SALE BY TREATY TREATY & ONLINE ONLINE COMPLETE CONVERSION TO BIOMASS FUEL IN 2013 BY DOOSAN POWER SYSTEMS On the instructions of Uniper UK Ltd To view and bid on the lots, please visit: http://www.go-dove.com/en/events?cmd=details&event=561140 ONLINE AUCTION: PRIVATE TREATY SALE: http://www.go-dove.com/en/events?cmd=details&event=561141
6
Embed
Ironbridge, Shropshire, United Kingdom FOR SALE … · † Water Treatment Plant and Large Capacity Water Pumps PRIVATE FOR SALE BY ... jet filter dust ... Ironbridge, Shropshire,
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
FEATURING:• Steam Turbine Generator• Additional Fuel Intake System• Dust Suppression• Transformers and Switch Gear• Wood Pellet Hammer Mills• Mobile Plant and Vehicles• Circuit Breaker and Relays
For further details on technical specification or to arrange an inspection contact:
EQUIPMENT FROM EQUIPMENT FROM THE CLOSURE OF THE CLOSURE OF IRONBRIDGE POWER IRONBRIDGE POWER STATIONSTATION
AUCTIONS
• Air Compressors• A substantial quantity of Turbine spares including spare LP, HP and IP rotors• Machine Shop, Spare Parts and Accessories Equipment• Conveyors, Hoppers, Silos, Tanks and other Transfer Equipment• Gantry Cranes• Railway Lines• Water Treatment Plant and Large Capacity Water Pumps
PRIVATEPRIVATEFOR SALE BY
TREATYTREATY&ONLINEONLINE
6. All removal activities to comply with
local Health & Safety Rules.
7. All descriptions are prepared and
intended as a general guide to
supplement an inspection and do not
form part of any offer or contract. Its
accuracy is not guaranteed and must
be verified by prospective buyers.
1. A Buyer’s Premium of 18% applies.
2. Local VAT/GST 20% payable on all purchases.
3. All items are sold as is, where is, with all faults
and without recourse.
4. All costs & activities related to removal of the
items are the sole responsibility of the purchaser.
5. No dismantling will be allowed until full cleared
funds have been received.
Terms and conditions:
For further details on technical specification or to arrange an inspection contact:
Air Compressors• Worthington Creyssensac ‘Rollair 1500V’ variable
speed/flow air compressor max 12.5 bar (Qty 2, 2011)
• Atlas Copco ‘ZT245-8’ air compressor max 8 bar
(Qty 3, 1988)
• Atlas Copco ‘GA160’ air compressor max 7.5 barg (Qty 2)
• Atlas Copco ‘ZT30’ air compressor 7.5 barg
• Atlas Copco ‘ZT37’ air compressor 7.5 barg
• Atlas Copco ‘ZE4B’ air compressor 3 bar (Qty 8, 1988)
Large quantity of machine spares including bearing, filters, motors, fixings, electrical components,etc.
Machine Shop, spare parts and accessories equipment• Colchester ‘Triumph 2000’ gap bed centre lathe
• Colchester ‘Mascot 1600’ gap bed centre lathe
• Mitchell ’12 ½ ‘ gap bed centre lathe
• Ajax Cleveland ‘Knee type’ milling machine
• Richmond knee type milling machine
• Ajax ‘AJ600H’ surface grinding machine
• Kitchen/Walker ‘4 – 6” E2’ radial arm drilling machine
• General machine shop machinery
MOBILE PLANT AND VEHICLES• Moxy ‘MT30’ articulated dump truck• Komatsu ‘PC210’ excavator (1998)• Case ‘5150A’ tractor• Renault ‘ARES816RZ’ 4WD tractor (2002)• Ford ‘4110’ tractor• Major ‘LGP2600’ slurry tank
COMPLETE CONVERSION TO BIOMASS FUEL IN 2013 BY DOOSAN POWER SYSTEMS
EQUIPMENT FROM THE CLOSURE OF IRONBRIDGE POWER STATION
CONVEYORS, HOPPERS, SILOS, TANKS AND OTHER TRANSFER EQUIPMENT• Over 2 kilometres of 1300mm rubber belt transfer conveyor throughout the facility
RAILWAY LINES• Over 6 kilometers of railway track complete with inspection platforms and lighting towers
WATER TREATMENT PLANT & LARGE CAPACITY WATER PUMPS• John Thompson-Kennicott Ltd/ Dewplan Water• Deionisation Water Treatment Plants• Norm flow rate 27.15 ltrs/s (21’500 Gal/hr) and 23.68 ltrs/s (18’750 Gal/hr)• Water source River severn
• Large capacity circulating water pump• Laurence Scott IP22EVDP induction motor (2313 kW)• Total pump weight 32'440 kgs• Capacity 7955.535 l/s (105,000 gal/min)• Circulation flow 6819-8334 l/s (5.4 - 6.6 million gallons/hr)
EQUIPMENT FROM EQUIPMENT FROM THE CLOSURE OF THE CLOSURE OF IRONBRIDGE POWER IRONBRIDGE POWER STATIONSTATION
AUCTIONS
• Air Compressors• A substantial quantity of Turbine spares including spare LP, HP and IP rotors• Machine Shop, Spare Parts and Accessories Equipment• Conveyors, Hoppers, Silos, Tanks and other Transfer Equipment• Gantry Cranes• Railway Lines• Water Treatment Plant and Large Capacity Water Pumps
PRIVATEPRIVATEFOR SALE BY
TREATYTREATY&ONLINEONLINE
6. All removal activities to comply with
local Health & Safety Rules.
7. All descriptions are prepared and
intended as a general guide to
supplement an inspection and do not
form part of any offer or contract. Its
accuracy is not guaranteed and must
be verified by prospective buyers.
1. A Buyer’s Premium of 18% applies.
2. Local VAT/GST 20% payable on all purchases.
3. All items are sold as is, where is, with all faults
and without recourse.
4. All costs & activities related to removal of the
items are the sole responsibility of the purchaser.
5. No dismantling will be allowed until full cleared
funds have been received.
Terms and conditions:
For further details on technical specification or to arrange an inspection contact:
Air Compressors• Worthington Creyssensac ‘Rollair 1500V’ variable
speed/flow air compressor max 12.5 bar (Qty 2, 2011)
• Atlas Copco ‘ZT245-8’ air compressor max 8 bar
(Qty 3, 1988)
• Atlas Copco ‘GA160’ air compressor max 7.5 barg (Qty 2)
• Atlas Copco ‘ZT30’ air compressor 7.5 barg
• Atlas Copco ‘ZT37’ air compressor 7.5 barg
• Atlas Copco ‘ZE4B’ air compressor 3 bar (Qty 8, 1988)
Large quantity of machine spares including bearings, filters, motors, fixings, electrical components,etc.
Machine Shop, spare parts and accessories equipment• Colchester ‘Triumph 2000’ gap bed centre lathe
• Colchester ‘Mascot 1600’ gap bed centre lathe
• Mitchell ’12 ½ ‘ gap bed centre lathe
• Ajax Cleveland ‘Knee type’ milling machine
• Richmond knee type milling machine
• Ajax ‘AJ600H’ surface grinding machine
• Kitchen/Walker ‘4 – 6” E2’ radial arm drilling machine
• General machine shop machinery
MOBILE PLANT AND VEHICLES• Moxy ‘MT30’ articulated dump truck• Komatsu ‘PC210’ excavator (1998)• Case ‘5150A’ tractor• Renault ‘ARES816RZ’ 4WD tractor (2002)• Ford ‘4110’ tractor• Major ‘LGP2600’ slurry tank
COMPLETE CONVERSION TO BIOMASS FUEL IN 2013 BY DOOSAN POWER SYSTEMS
EQUIPMENT FROM THE CLOSURE OF IRONBRIDGE POWER STATION
CONVEYORS, HOPPERS, SILOS, TANKS AND OTHER TRANSFER EQUIPMENT• Over 2 kilometres of 1300mm rubber belt transfer conveyor throughout the facility
RAILWAY LINES• Over 6 kilometers of railway track complete with inspection platforms and lighting towers
WATER TREATMENT PLANT & LARGE CAPACITY WATER PUMPS• John Thompson-Kennicott Ltd/ Dewplan Water• Deionisation Water Treatment Plants• Norm flow rate 27.15 ltrs/s (21’500 Gal/hr) and 23.68 ltrs/s (18’750 Gal/hr)• Water source River severn
• Large capacity circulating water pump• Laurence Scott IP22EVDP induction motor (2313 kW)• Total pump weight 32'440 kgs• Capacity 7955.535 l/s (105,000 gal/min)• Circulation flow 6819-8334 l/s (5.4 - 6.6 million gallons/hr)
EQUIPMENT FROM EQUIPMENT FROM THE CLOSURE OF THE CLOSURE OF IRONBRIDGE POWER IRONBRIDGE POWER STATIONSTATION
AUCTIONS
• Air Compressors• A substantial quantity of Turbine spares including spare LP, HP and IP rotors• Machine Shop, Spare Parts and Accessories Equipment• Conveyors, Hoppers, Silos, Tanks and other Transfer Equipment• Gantry Cranes• Railway Lines• Water Treatment Plant and Large Capacity Water Pumps
PRIVATEPRIVATEFOR SALE BY
TREATYTREATY&ONLINEONLINE
6. All removal activities to comply with
local Health & Safety Rules.
7. All descriptions are prepared and
intended as a general guide to
supplement an inspection and do not
form part of any offer or contract. Its
accuracy is not guaranteed and must
be verified by prospective buyers.
1. A Buyer’s Premium of 16% applies.
2. Local VAT/GST 20% payable on all purchases.
3. All items are sold as is, where is, with all faults
and without recourse.
4. All costs & activities related to removal of the
items are the sole responsibility of the purchaser.
5. No dismantling will be allowed until full cleared
funds have been received.
Terms and conditions:
For further details on technical specification or to arrange an inspection contact:
Air Compressors• Worthington Creyssensac ‘Rollair 1500V’ variable
speed/flow air compressor max 12.5 bar (Qty 2, 2011)
• Atlas Copco ‘ZT245-8’ air compressor max 8 bar
(Qty 3, 1988)
• Atlas Copco ‘GA160’ air compressor max 7.5 barg (Qty 2)
• Atlas Copco ‘ZT30’ air compressor 7.5 barg
• Atlas Copco ‘ZT37’ air compressor 7.5 barg
• Atlas Copco ‘ZE4B’ air compressor 3 bar (Qty 8, 1988)
Large quantity of machine spares including bearings, filters, motors, fixings, electrical components,etc.
Machine Shop, spare parts and accessories equipment• Colchester ‘Triumph 2000’ gap bed centre lathe
• Colchester ‘Mascot 1600’ gap bed centre lathe
• Mitchell ’12 ½ ‘ gap bed centre lathe
• Ajax Cleveland ‘Knee type’ milling machine
• Richmond knee type milling machine
• Ajax ‘AJ600H’ surface grinding machine
• Kitchen/Walker ‘4 – 6” E2’ radial arm drilling machine
• General machine shop machinery
MOBILE PLANT AND VEHICLES• Moxy ‘MT30’ articulated dump truck• Komatsu ‘PC210’ excavator (1998)• Case ‘5150A’ tractor• Renault ‘ARES816RZ’ 4WD tractor (2002)• Ford ‘4110’ tractor• Major ‘LGP2600’ slurry tank
COMPLETE CONVERSION TO BIOMASS FUEL IN 2013 BY DOOSAN POWER SYSTEMS
EQUIPMENT FROM THE CLOSURE OF IRONBRIDGE POWER STATION
CONVEYORS, HOPPERS, SILOS, TANKS AND OTHER TRANSFER EQUIPMENT• Over 2 kilometres of 1300mm rubber belt transfer conveyor throughout the facility
RAILWAY LINES• Over 6 kilometers of railway track complete with inspection platforms and lighting towers
WATER TREATMENT PLANT & LARGE CAPACITY WATER PUMPS• John Thompson-Kennicott Ltd/ Dewplan Water• Deionisation Water Treatment Plants• Norm flow rate 27.15 ltrs/s (21’500 Gal/hr) and 23.68 ltrs/s (18’750 Gal/hr)• Water source River severn
• Large capacity circulating water pump• Laurence Scott IP22EVDP induction motor (2313 kW)• Total pump weight 32'440 kgs• Capacity 7955.535 l/s (105,000 gal/min)• Circulation flow 6819-8334 l/s (5.4 - 6.6 million gallons/hr)