The GB787SH hand held weight is over lighter than the 256 installation tool and over 200% lighter than the 255 installation tool RIVET & LOCKBOLT TOOLS MA I TH GB787SH Aerospace & Commercial Lockbolt Installation Tool The GB787SH hand- held weight is 4.3 lb (1.95 kg) and is the lightest tool on the market for installing up to 3/8” lockbolt fasteners. BOM®, LGP®, C6L®, GP®, MLGP®, MGP®, AND MAGNA-GRIP® ARE REGISTERED TRADEMARKS OF ARCONIC INC. AVBOLT®, AVDELOK®, AND MAXLOK® ARE REGISTERED TRADEMARKS OF AVDEL UK LIMITED. DESCRIPTION The GB787SH is the lightest tool on the market for installing up to 3/8” lockbolt fasteners. It offers a unique “split” system providing the operator with an ergonomic tool with a reduced hand held weight of only 4.3 lb (1.95 kg) and can be operated in any position. The GB787SH has a 0.670" (17.0 mm) setting stroke, a rated pull load of 9,000 lbf (40.0 kN) with 90 psi. (6.2 bar) air pressure at the air inlet and comes with 8 ft (2.4 m) hydraulic hose. Use with Split-System Backpacks to increase user mobility, ergonomics and productivity. The GB787SH installation tool operates on 90 to 100 psi. (6.2 - 6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing the maximum efficiency. At 90 psi. (6.2 bar) of air pressure, the GB787SH does not exceed 74.2 dB(A) and consumes 0.60 SCF/cycle (17 L/cycle). The air inlet is provided with 1/4-18 female pipe thread to accept the users air hose fitting. NOSE ASSEMBLIES ARE NOT FURNISHED WITH THIS TOOL AND MUST BE PURCHASED SEPARATELY 250% GB787SH Stroke - 0.670" (17.0 mm) Hand held weight – 4.30 lb (1.95 kg) Entire tool weight – 15.1 lb (6.85 kg) Pull load - 9,000 lbf (40.0 kN) Hyd. Hose Length (std.) - 8 ft (2.4m) 5 f t Hyd. Hoses are recommended with use of Backpack. Additional custom lengths are available. AEROSPACE COMMERCIAL 3/8” NAS, GPⓇ 3/8” LGP , MGP , MLGP Ⓡ Ⓡ Ⓡ 3/8” C6L , Avdelok Ⓡ Ⓡ 5/16” BOM , Avbolt Ⓡ Ⓡ 3/8” Magna-Grip , Maxlok Ⓡ Ⓡ VS shown GB756 GB787SH Hand Held Weight 4.3 lbs (1.95 kg) Gage Bilt tool GB756 hand- held weight : 11.1 lb (5.03 kg) Competitor’s t ool 256 hand-held weight: 11.1 lb (5.03 kg) Competitor’s t ool 255 hand-held weight: 8.8 lb (4.02 kg) GB787SH GAGE BILT l ~~ . ?.~e~!~~ '~OOttLIN.G ircra Tooling 800-832-7009 [email protected]innovativetooling.com
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
The GB787SH hand held weight is over lighter than the 256 installation tool and over 200% lighter than the 255 installation tool
R I V E T & L O C K B O LT T O O L S
MA I TH
GB787SHAerospace & Commercial
Lockbolt Installation Tool
The GB787SH hand-held weight is 4.3 lb (1.95 kg) and is the lightest tool on the market for installing up to 3/8” lockbolt fasteners.
BOM®, LGP®, C6L®, GP®, MLGP®, MGP®, AND MAGNA-GRIP® ARE REGISTERED TRADEMARKS OF ARCONIC INC. AVBOLT®, AVDELOK®, AND MAXLOK® ARE REGISTERED TRADEMARKS OF AVDEL UK LIMITED.
DESCRIPTIONThe GB787SH is the lightest tool on the market for installing up to 3/8” lockbolt fasteners. It offers a unique “split” system providing the operator with an ergonomic tool with a reduced hand held weight of only 4.3 lb (1.95 kg) and can be operated in any position.
The GB787SH has a 0.670" (17.0 mm) setting stroke, a rated pull load of 9,000 lbf (40.0 kN) with 90 psi. (6.2 bar) air pressure at the air inlet and comes with 8 ft (2.4 m) hydraulic hose. Use with Split-System Backpacks to increase user mobility, ergonomics and productivity.
The GB787SH installation tool operates on 90 to 100 psi. (6.2 - 6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing the maximum efficiency. At 90 psi. (6.2 bar) of air pressure, the GB787SH does not exceed 74.2 dB(A) and consumes 0.60 SCF/cycle (17 L/cycle). The air inlet is provided with 1/4-18 female pipe thread to accept the users air hose fitting.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH THIS TOOL AND MUST BE PURCHASED SEPARATELY
250%
GB787SHStroke - 0.670" (17.0 mm)Hand held weight – 4.30 lb (1.95 kg)Entire tool weight – 15.1 lb (6.85 kg)Pull load - 9,000 lbf (40.0 kN)Hyd. Hose Length (std.) - 8 ft (2.4m)5 ft Hyd. Hoses are recommended with use of Backpack. Additional custom lengths are available.
AEROSPACECOMMERCIAL
3/8” NAS, GPⓇ
3/8” LGP , MGP , MLGPⓇ Ⓡ Ⓡ3/8” C6L , AvdelokⓇ Ⓡ
5/16” BOM , AvboltⓇ Ⓡ
3/8” Magna-Grip , MaxlokⓇ Ⓡ
VS
shownGB756
GB787SHHand Held Weight
4.3 lbs (1.95 kg)
Gage Bilt tool GB756 hand-held weight: 11.1 lb (5.03 kg)
Competitor’s tool 256 hand-held weight: 11.1 lb (5.03 kg)
Competitor’s tool 255 hand-held weight: 8.8 lb (4.02 kg)
*ALL OFFSET 204 SERIES NOSES REQUIRE 353204 ADAPTER WITH 756152 STROKE LIMITER..
*ALL OFFSET 205 SERIES NOSES REQUIRE 353205 ADAPTER WITH 756153 STROKE LIMITER.
**ALL RIGHT ANGLE NOSES REQUIRE 745751 ADAPTER.
NOTE: THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE LENGTH THE NOSE
EXTENDS FROM THE TOOL I.E. -20 = 2.0 INCHES
STRAIGHT
LGP® LOCKBOLT
LGPL2SC-V BACB30VM
LGPL18SC-V BACB30XT
LGPL4SC-V ABS0548
LGPL2SP-V BACB30VN
LGPL4SP-V ASNA2392
LGPL8SC-V BACB30WD
LGPL9SC-V BACB30WB
LGPL9SP-V BACB30VY
BACB31N BACB31P
*OFFSETBOM®
AVBOLT®
COMMERCIAL LOCKBOLTS
C6L®
AVDELOK®
GAGE BILT CERTIFIES THE GB787SH WILL INSTALL THE ABOVE FASTENERSSee www.gagebilt.com/nose_assemblies.php for nose assembly information (data sheets)
MULTI-GRIP LOCKBOLT
MAGNA-GRIP® and MAXLOK®
BOM ®, LGP®, C6L®, GP®, M LGP®, M GP®, AND M AGNA-GRIP® ARE REGISTERED TRADEM ARKS OF ARCONIC INC. AVBOLT®, AVDELOK®, AND M AXLOK® ARE REGISTERED TRADEM ARKS OF
AVDEL UK LIM ITED.
NAS and GP® SHEAR/TENSION
LOCKBOLTS
BACB30TY BACB30UA
BACB30TZ BACB30UB
BACB30DY BACB30GX
BACB30DX BACB30GP
BACB30GO BACB30GY
BACB30GW
MGP®(MILLIMETER)
LOCKBOLT
MLGP®(MILLIMETER)
LOCKBOLT
9/18
INNOVATIVETOOLING On the leading edge of Aircraft Tooling