TABLE OF CONTENTS
EN ISO 462-1 Wire Type 1 Marker Boxes 5
DIN 54 109 Wire Type 2 Film Dark Cassettes 5
EN ISO 462-2 Wire Type 2 Lead Intensifying Screen 6
ASTM E-747 Wire Type Penetrameters 2 Lead Sheet 7
ASTM SE 1025 Plate Penetrameters 3 Lead Marker Ruler 7
Lead Marker Strap/Tape 7
Film Shelves 8 Magnet 8Lead Markers 4
EN 462-1 Wire Type were introduced as a EUROPEAN STANDARD to
supersede the German Standards (DIN 54.109) and the British
Standards Institute (BS3971:1980 type 1) Image Quality Indicators.
Each indicator consists of a series of seven parallel wires of
different thichkness mounted and encapsulated between two thin
sheets of transparent, flexible PVC. A lead monogram indicates the
number of the thickest wire, the material and the EN symbol.
Wire Diameters:
All sizes are available in Steel(Fe), Aluminium(Al), and
Stainless Steel(SS). Copper(Cu), Zirconium(ZR) Image Quality
Indicators are only available in sizes 6 and 10. Nickel(Ni) Image
Quality Indicators are only available in sizes 6, 10 and 13.
As an illustration the identification (i.e. lead monogram) for,
say Size 10 (Wire numbers 10 to 16) in steel(Fe) would be 10 FE
EN.
ASTM E747 Wire Type Penetrameters consists of a series of six
parallel wires of different thicknesses, encapsulated between two
thin sheets of transparent, flexible PVC. Lead characters identify
the thickness of the thickest wire, and the material group(1-FE,
01-Ti, 02-Al, 03-Mg, 3-Ni, 4-Cu). The letters ASTM are also
included.
E-mail: [email protected]
TypeNameSpecification
Type1Film Cassettes PVC
with "Velcro" (Double
Layers)80120/80150/80180/80240/80300/80360
100240/100300/100360
120360/120400/120430
Type2Magnetic Film Cassettes PVC
with "Velcro" (Double
Layers)80120/80150/80180/80240/80300/80360
100240/100300/100360
120360/120400/120430
Type3Film Cassettes PVC
with "Inserted" (Single
Layer)80120/80150/80180/80240/80300/80360
100240/100300/100360
120360/120400/120430
Type4Film Cassettes Leatheroid
With Velcro80120/80150/80180/80240/80300/80360
100240/100300/100360
120360/120400/120430
Type5Magnetic Film Cassettes Leatheroid
With Velcro80120/80150/80180/80240/80300/80360
100240/100300/100360
120360/120400/120430
Film Cassettes PVC for Pipeline210070
Magnetic Film Cassettes PVC for Pipeline210070
Film Cassettes Leatheroid for Pipeline210070
Magnetic Film Cassettes Leatheroid for Pipeline210070
Type6Folding magnetic
Cassettes80150/80180/80240/80300/80360/80240
100300/100360
Type7Folding magnetic Cassettes
with lead sheet80240/80300/80360
100300/100360
120360/120400
Any Sizes you need we can made to your order!
Normal Size
WidthLengthThickness
601800.03/602400.03/603000.03/603600.03
801200.03/801500.03/801800.03/802400.03
803000.03/803600.03
1002400.03/1003000.03/1003600.03
1202400.03/1203000.03/1203600.03/1204300.03
1253600.03/1253000.03/1252400.03
601800.1/602400.1/603000.1/603600.1
801200.1/801500.1/801800.1/802400.1
803000.1/803600.1
1002400.1/1003000.1/1003600.1
1202400.1/1203000.1/1203600.1/1204300.1
1253600.1/1253600.1/1252400.1
2100700.03
Any Sizes you need we can make to your order!
[The size need to be custom-made, Please supply the size, Front
thick and Back thick]
PS: if you have any new products(outside this cataloge) about
Radiography, which you want to have them make to order, please let
me know without any hesitation!
RADIOGRAPHY: Accessories
Image Quality Indicators (I.Q.Is) - Penetrameters
Marker Boxes
EN ISO 462-1 IQI
Film Dark Cassettes
DIN 54 109 IQI
EN ISO 462-2 IQI
Lead Intensifying Screen
ASTM E-747 IQI
Lead Sheet
ASTM SE 1025 IQI
Other Accessories
LEAD MARKERS
Contact Us:
Office711-6-99 Yulan Road Nanjing City Jiangsu Provice China
Email HYPERLINK "mailto:[email protected]" [email protected]
Fax0086-25-84664170
RADIOGRAPHY: Accessories
Image Quality Indicators (I.Q.Is) - Penetrameters
Wire Number 1 2 3 4 5 6 7 8 9 10
Wire Diam(mm) 3.20 2.50 2.00 1.60 1.25 1.00 0.80 0.63 0.50
0.40
Wire Number 11 12 13 14 15 16 17 18 19
Wire Diam(mm) 0.32 0.25 0.20 0.16 0.125 0.10 0.08 0.063 0.05
Indicator Sizes:
There are four sizes of EN Image Quality Indicators.
Size 1 contains wire numbers 1 to 7 and used for material
thicknesses in the range of 40 t 160mm
Size 6 contains wire numbers 6 to 12 and used for material
thicknesses in the range of 12.5 to 50mm
Size 10 contains wire numbers 10 to 16 and used for material
thicknesses in the range of 5 to 20mm
Size 13 contains wire numbers 13 to 19 and used for material
thicknesses in the range 2.5 to 10mm
Contact Us:
Office711-6-99 Yulan Road Nanjing City Jiangsu Provice China
Email HYPERLINK "mailto:[email protected]" [email protected]
Fax0086-25-84664170 1
Contact Us:
Office711-6-99 Yulan Road Nanjing City Jiangsu Provice China
Email HYPERLINK "mailto:[email protected]" [email protected]
Fax0086-25-84664170 1
RADIOGRAPHY: Accessories
Image Quality Indicators (I.Q.Is) - Penetrameters
DIN 54 109 Wire Type Image Quality Indicators are similar to the
EN 462-1 I.Q.Is, the wire diameters are the same, and there are the
same wire numbers in each size of indicator. The only difference
being that the lead monogram reads DIN rather than EN.
Example:
Size 6Wire numbers 6 to 12) in Stainless Steel(SS) would be 6
DIN SS.
EN 462-2 Stepwedge/Hole Type Penetrameters
Stepwedge in shape and available in four Model Numbers H5, H9
and H13 in Steel.
Model No. Stepwedge Range Material Thickness
H5 0.32 to 1mm 16 to 50mm
H9 0.8 to 2.5mm 40 to 125mm
H13 2 TO 6.3mm 100 to 315mm
ShenZhen Highness Industrial Development Co., LTD
TEL: +86-755-2583 9115
FAX: +86-755-2588 7855
E-mail: [email protected]
Web: www.highness.cn
2
Available for Fe, Cu, Al, Mg, Ni&Cu.
Set No. Wire No Dia. Mm Dia. Ins
A 1 0.08 0.0032
`` 2 0.10 0.0040
`` 3 0.13 0.0050
`` 4 0.16 0.0063
`` 5 0.20 0.0080
`` 6 0.25 0.0100
Contact Us:
Office711-6-99 Yulan Road Nanjing City Jiangsu Provice China
Email HYPERLINK "mailto:[email protected]" [email protected]
Fax0086-25-84664170 2
RADIOGRAPHY: Accessories
Image Quality Indicators (I.Q.Is) - Penetrameters
Available for Fe, Cu, Al, Mg, Ni&Cu.
Set No. Wire No Dia. Mm Dia. Ins
B 1 0.25 0.010
`` 2 0.33 0.013
`` 3 0.40 0.016
`` 4 0.51 0.020
`` 5 0.64 0.025
`` 6 0.81 0.032
Available for Fe.
Set No. Wire No Dia. Mm Dia. Ins
C 1 0.81 0.032
`` 2 1.02 0.040
`` 3 1.27 0.050
`` 4 1.60 0.063
`` 5 2.03 0.080
`` 6 2.50 0.100
Available for Fe.
Set No. Wire No Dia. Mm Dia. Ins
D 1 2.50 0.100
`` 2 3.20 0.128
`` 3 4.06 0.160
`` 4 5.10 0.200
`` 5 6.40 0.250
`` 6 8.00 0.320
ASTM SE 1025 Plate Penetrameters are normally used to conform
with the American Inspection Standards. They are rectangular
plates, 2% in thichness of the specimen and of material
radiographically similar to the specimen. Each plate has three
holes drilled equal in diameter to 1X, 2X, and 4X the plate
penetrameter thickness. The minimum thickness of Plate type
penetrameter is 0.010. For Penetrameters greater than 0.180, these
are supplied in disc form, the outside diameter is 4X, with 2 holes
1X & 2X the thickness of the Penetrameter.
The chart below gives Plate Penetrameter Identification and
thickness and a guide as to which penetrameter to use for each
material thickness.
Contact Us:
Office711-6-99 Yulan Road Nanjing City Jiangsu Provice China
Email HYPERLINK "mailto:[email protected]" [email protected]
Fax0086-25-84664170 3
RADIOGRAPHY: Accessories
Image Quality Indicators (I.Q.Is) - Penetrameters
ASME Pene. Material Thickness
I.D. Thickness Ins mm
5 0.0050