ipmen Glass Filled Nylon and MetalBreathersretem.com/Pictures/Parker Accessories[1].pdf · Glass-Filled Nylon and MetalBreathers IP65Rated,Metal,Screw-on and Lockables Reservoirequipment

Reservoir Equipment

Glass-Filled Nylon and Metal BreathersIP65 Rated, Metal, Screw-on and Lockables

Reservoir equipment183

Reservoir Equipment

IP65 Rated Filler Breathers

Option 1 Filler Breathers (Single Hole Installation)

Specification for Single and 6 Hole Installation

Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 25

184

Option 1

Construction:Moulded in non-corrodibleglass-filled nylon combiningstrength with a lightweightdesign.

Options:(1) single (63mm dia) holeFiller breather installation thateliminates drilled and tappedholes using self-lockingclamps.(2) 6 holeFiller Breather Installationthat uses 6 x No 10 threadforming screws.(3) 3 hole filler breatherutilises 3 x zinc and clearchromate plated steelscrews.

Strainers:Unique design diffuses oilflow into the reservoir.(1) Single length inpolypropylene (95mm length)(2) 2-piece telescopic inpolypropylene (195mm lengthmax.)

Filtration element:Expanded polyurethanefoam, 10 micron nominal.

Seals:Nitrile.

Working temperature:-30°C to +90°C.

Pressurised filler breathers:Available in 3 pressureoptions to maintain a positivepressure in a reservoir.

Pressurisation options:0.2, 0.35 and 0.7 bar crackpressure.

Pressurisation valve:Nylon/Nitrile.

Dipstick:Available for use with options1 and 2. Dipsticks areavailable in 2 lengths and inpacks of 10.

Dipstick material:ABS.

Hi/Lo indicators:Acetal. Adjustable Red/Greenlevel indicators.

Dipstick lengths:200mm and 400mm.

Breather weight:0.2Kg.

Anti-splash feature:The unique design anti-splash feature is standardon all options 1 and 2 andallows for a dipstick to befitted if required.

0 5 10 15Flow I/sec (Air)

1.0 0.7 Valve

0.2 Valve

0.35 Valve

1.2

0.8

0.6

0.4

0.2

0

16.9

14.6

11.6

2.9

0

5.8 Δp(P

SID

)

7.3


Without Anti-Splash

With Anti-Splash

0.20

0.15

0.10

0.05

0

0.25

2.9

0

1.5 Δp(P

SID

)

Option 1. Single Hole Filler Breathers – Non-Pressurised

Option 1. Single Hole Filler Breathers – Pressurised

AB98XXX Pressurised Pressure Drop Curves

AB98XXX Non-Pressurised Pressure Drop Curves

Ø101

Ø42

70

167

Ø7.0

A

A

10m

ax

Part numberAB98212011AB98213011AB98212001AB98212021AB98213001AB98213021AB98217001AB98217011AB98217021

SupersedesAB.98212011.UCAB.98213011.UCAB.98212001.UCAB.98212021.UCAB.98213001.UCAB.98213021.UCAB.98217001.UCAB.98217011.UCAB.98217021.UC

Description 10µ nomPressurised 0.2bar with 95mm strainerPressurised 0.35bar with 95mm strainerPressurised 0.2bar without strainerPressurised 0.2bar with telescopic strainerPressurised 0.35bar without strainerPressurised 0.35bar with telescopic strainerPressurised 0.7bar without strainerPressurised 0.7bar with 95mm strainerPressurised 0.7bar with telescopic strainer

Note 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will requireyou to contact Parker Filtration for availability.

Part numberAB98210011AB98210021AB98210001

SupersedesAB.98210011.UCAB.98210021.UCAB.98210001.UC

Description 10µ nomFiller breather with 95mm strainerFiller breather with telescopic strainerFiller breather without strainer


Reservoir equipment

Filler Breathers (6 Hole Installation)

185

Option 2

Note 1. Un-pressurised 6 hole fixing:

Form 6 off tank mounting holes between Ø4.0 and 4.4mm (dependent on the material and thickness – see guide below)equispaced on 70-73mm P.C.D. to suit supplied No.10 thread forming screws.

Note 2. Pressurised 6-hole fixing:

Form 6 off tank mounting holes between Ø4.0 and Ø4.4mm (dependent on the material and thickness – see guide below)equispaced on 73mm P.C.D. to suit supplied No.10 thread forming screws.

Note 3. Reservoir mounting guide

Sheet thickness mm Hole size mm1.2 4.02.0 4.103.15 4.304.0 4.305.0 4.40

Option 2. 6 Hole Filler Breathers – Non-Pressurised

Option 2. 6 Hole Filler Breathers – Pressurised

Telescopic Strainer

The telescopic strainer designis ideal, where reservoir depthallows, to increase the surfacearea of the strainer, improvingstill further its straining ability,oil flow-through and allowing forlonger dipstick lengths.

Ø101

Ø42

167

72

A 73 70

6x Ø 4.44.0

Ø101

Ø42

271

72

Ø31


SupersedesAB.98810001.UCAB.98810011.UCAB.98810021.UC

Description 10µ nomFiller breather without strainerFiller breather with 95mm strainerFiller breather with telescopic strainer

Part numberAB98817011AB98812001AB98812011AB98812021AB98813001AB98813011AB98813021AB98817001AB98817021

SupersedesAB.98817011.UCAB.98812001.UCAB.98812011.UCAB.98812021.UCAB.98813001.UCAB.98813011.UCAB.98813021.UCAB.98817001.UCAB.98817021.UC

Description 10µ nomPressurised 0.7bar with 95mm strainerPressurised 0.2bar without strainerPressurised 0.2bar with 95mm strainerPressurised 0.2bar with telescopic strainerPressurised 0.35bar without strainerPressurised 0.35bar with 95mm strainerPressurised 0.35bar with telescopic strainerPressurised 0.7bar without strainerPressurised 0.7bar with telescopic strainer



Reservoir Equipment

Filler Breathers

Dipstick Options

Option 3 Filler Breathers (3 Hole Installation)


186

Note: Form 3 off tank mounting holes between Ø4.0 and Ø4.4mm (dependent on thematerial and thickness – see chart for guide) equispaced on 41.3 P.C.D. to suit No.10 thread forming screws supplied.

4663

.5

Ø24

Ø50

.5

Ø53

A 41.3

3x Ø 4.44.0

3-hole Filler Breathers (6-hole available)

Note 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will requireyou to contact Parker Filtration for availability.Note 3: Not suitable for use with B.68206/207Note 4: 6-hole AB.68910/AB.68918 option available.

Dipsticks

The dipstick, available in 2 lengths – 200mm and 400mm,can be cut to the required length or left as it is and the Hi/Loindicators moved and positioned on the dipstick itself bysqueezing the sides of the indicator and repositioning alongthe dipstick.

New Options Fully Tested

As part of the design developmentprogramme for the new IP65 FillerBreathers, extensive performance andendurance testing was carried out toensure durability and efficiency.

Part numberAB68110AB68118

Description 10µ nom

Filler breather without strainerFiller breather with 95mm strainer

Part numberB68206B68207

SupersedesDIP.206DIP.207

Description10 x 200mm Dipsticks10 x 400mm Dipsticks

Dipstick Ordering


Reservoir Equipment

Screw-On Type Air Breathers

Reservoir equipment

Pressure Drop Flow Curve

Standard Screw-On Breathers - Specification

187

Option 1– G1/2 and G3/4 (Ø101)


Δp(b

ar)

0

0.30

0.25

0.20

0.15

0.10

0.05Without Anti-Splash

With Anti-Splash

4.4

1.5

0

2.9

Δp(P

SID

)

Note: For pressure drop information on the Option 1. Pressurised consult Parker Filtration.

AB98XXX Screw-on Non-Pressurised Pressure Drop CurvesG1/2

G3/4

Ø101

Ø101

G1/2

G3/4

30 A/F HEX

93

1310

96

1610

A

A

30 A/F HEX

Construction:Moulded in non-corrodible glass-filled nyloncombining strength with a lightweight design.

Option 1:2 screw on type air breathers are available– G1/2 or G3/4 threaded base models.

Filtration element:Expanded polyurethane foam, 10 micronnominal.

Seals:Nitrile.


Pressurised air breathers:Available in 3 pressure options to maintain apositive pressure in a reservoir.

Pressurisation options:0.2, 0.35 and 0.7 bar crack pressure.

Pressurisation valve:Nylon/Nitrile.

Dipstick:Available for use with all options. Dipsticksare available in 2 lengths and in packs of 10.


Hi/Lo indicators:Acetal. Adjustable red/green level indicators.

Dipstick lengths:200mm and 400mm.

Breather weight:0.2Kg.

Anti-splash feature:The unique design anti-splash feature isstandard on option 1 and allows for adipstick to be fitted if required.

Option 1 – G1/2 or G3/4

Part numberAB98610101AB98612101AB98613101AB98617101AB98410101AB98412101AB98413101AB98417101

SupersedesAB.98610101.UCAB.98612101.UCAB.98613101.UCAB.98617101.UCAB.98410101.UCAB.98412101.UCAB.98413101.UCAB.98417101.UC

Description 10µ nomG1/2 Un-pressurisedG1/2 pressurised 0.2 barG1/2 pressurised 0.35 barG1/2 pressurised 0.7 barG3/4 Un-pressurisedG3/4 pressurised 0.2 barG3/4 pressurised 0.35 barG3/4 pressurised 0.7 bar


Reservoir Equipment

Screw-On Type Air Breathers

Pressure Drop Flow Curve Ordering Information

Compact Screw-On Breathers - Specification

Construction:G1/4, G3/8, R1/2 and R3/4 cap and base plate mouldings in nylon 66.

Element:Expanded Polyurethane foam, 10 micron nominal.

Dipstick:Available for use with R1/2 and R3/4.


Hi/Lo indicators:Acetal adjustable red/green level indicators.

Dipstick lengths:200mm and 400mm (packs of 10).

Breather weights:0.028Kg


188

Option 2 – G1/4, G3/8, R1/2 and R3/4 (Ø40)

Flow I/sec (Air)

0.20

0 0.5

Δp(b

ar)

0.18

0.16

0.14

0.12

0.10

0.08

0.06

0.04

0.02

01.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5

G1/4219

115

0

Δp(P

SID

)

Ø40

Ø40

Ø40

Ø40

5760 60

59

6

912

.5

1413

.59

G1/4

R1/2

20 A/F HEX

20 A/F HEX

20 A/F HEX G3/8

R3/4

20 A/F HEX

914

G1/4 G3/8

R1/2 R3/4

Note: For pressure drop information on G3/8, R1/2 and R3/4, consult Parker Filtration.

Option 2 – G1/4, G3/8, R1/2 and R3/4 (Packs of 10 only)Part number

AB683101AB68X101AB68Y101AB68Z101

SupersedesAB.683101.UCAB.68X101.UCAB.68Y101.UCAB.68Z101.UC

Description 10µ nomG1/4 Un-pressurisedG3/8 Un-pressurisedR1/2 Un-pressurisedR3/4 Un-pressurised


Reservoir equipment

Pressure Drop Flow Curve Ordering Information

Screw-On Type Air Breathers - Specification

189

Construction:Mouldings in glass-filled nylon and glass coupled polypropylene.

Element:Expanded Polyurethane foam, 10 micron nominal.

Seals:Nitrile.

Pressurised air breathers:Available G3/8, G1/2 and G3/4,3 pressure options to maintain a positive pressure in a reservoir.

Pressurisation options:0.2, 0.35 and 0.7 bar crack pressure.

Pressurisation valve:Nylon.

Dipstick:Available for use with G3/8, G1/2 and G3/4.

Dipstick material:Mini-series in brass.

Hi/Lo indicators:Acetal adjustable red/green level indicators.

Dipstick lengths:200mm and 400mm (packs of 10).

Breather weights:0.075Kg, Mini-series – 0.019Kg.

Option 3 – G3/8, G1/2 and G3/4 (Ø70)

0.14

0.12

0.10

0.08

0.06

0.04

0.02

0 5 10 15 20 25Flow I/sec (Air)

Δp(b

ar)

G3/8

G1/2

G3/4

0

G3/8 G1/2

G3/4

Ø70 Ø70

Ø70

68 68

71

G3/8 G1/2

G3/4

8.5

8.5

12.5

8.5

12.5

15.5

28 A/F HEX 28 A/F HEX

31 A/F HEX

A

A

The mini-series breather

Screw-on option Push-fit optionØ20

36

20

15°30°

1.6

Ø13.55Ø13.35

Ø22 Spotface

7.8

10.5 m

in

Ø16.2516.00

Ø15.1015.00

Ø11.8G1/4

Option 3 – G3/8, G1/2 and G3/4


SupersedesSAB.5101SAB.7101SAB.6101

Description 10µ nomG3/8 Un-pressurisedG3/4 Un-pressurisedG1/2 Un-pressurised


Part numberS680003

Description

Gearbox air breather

Part number Supersedes Replacement cap Supersedes DisplacementI/min

Reservoir Equipment

Filler Breathers (Metal)

Ordering Information

Metal Airbreather/Filler breather Specification


190

Locking lugoption (5561)

For addedsecurity, certainParker FiltrationMetal FillerBreather Filterscan be specifiedwith a lockinglug option.

Ø83

Ø76.2

43.4

58.2

153.

5

Ø49.5

Crackpressure

Micronrating

Air flowm3/min

Thread Weight

Standard products table

Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

Threaded airbreather (unpressurised)

Filler breather - filter flange type (unpressurised)

Filler breather - filter flange type (pressurised)

Air breather - threaded type (pressurised)

SAB156210SAB156310

AB116310AB138010

5561

PAB1730105PAB17301010

SPA1731105SPA17311010

SAB.1562.10SAB.1563.10

AB.1163.10AB.1380.10

N/A

PAB.1730.10.5PAB.1730.10.10

SPA.1731.10.5SPA.1731.10.10

N/AN/A

CAP.116310CAP.138010

N/A

CAP.1730105CAP.17301010

N/AN/A

N/AN/A

CAP.1163.10CAP.1380.10

N/A

CAP.1730.10.5CAP.1730.10.10

N/AN/A

430135

430135430

430430

430430

N/AN/A

N/AN/AN/A

0.35 bar0.70 bar

0.35 bar0.70 bar

10µ nom10µ nom

10µ nom10µ nom10µ nom

10µ nom10µ nom

10µ nom10µ nom

0.450.15

0.450.150.45

0.450.45

0.450.45

G3/4

G1/4

N/AN/AN/A

N/AN/A

G3/4

G3/4

0.20kg0.06kg

0.24kg0.08kg0.24kg

0.27kg0.27kg

0.20kg0.20kg

Reservoir equipment

Breather Units Ordering Information

191

1731 - Threaded type (Pressurised)Displacement:430 l/min.

Micron rating:10µ nominal

Air flow:0.45m3/min.

Weight:0.2 Kg.

Thread:G3/4.

Valve crack-pressure:0.35 and0.7 bar.

Displacement:1562 = 430 l/min.1563 = 135 l/min.


Air flow:1562 = 0.45m3/min.1563 = 0.15m3/min.

Weight:1562 = 0.20 Kg.1563 = 0.06 Kg.

Thread:1562 = G3/4.1563 = G1/4.

1562-1563 - Threaded type (Un-pressurised)

Displacement:135 l/min.


Air flow:0.15m3/min.

Weight:0.08 Kg.

1380 - Filter flange type

Tank installation notes1. Un-pressurised 6 hole fixingForm off tank mounting holes betweenØ4.0 and Ø4.4 (dependant on the materialand thickness, consult Parker Filtration)equispaced on 70.0-73.0 P.C.D. to suitNo. 10 thread forming screws supplied.

2. Pressurised 6 hole fixingForm 6 off mounting holes betweenØ4.0 and Ø4.4 equispaced on 73.0P.C.D. to suitNo. 10 thread forming screws supplied.

3. Un-pressurised 3 hole fixingForm 3 off tank mounting holesbetween Ø4.0 and Ø4.4 equispaced on41.3 P.C.D. to suitNo. 10 thread forming screws supplied.

35 A/F HEX

Ø76.2

G3/4

65

16

43.4

6

16 A/F HEX

G1/4/G3/4

Ø44.5

56.5

13

36.5

7

Ø44.5

36.5

110

47

Ø51

Ø35

22

5

Three size:1/4” BSPT3/8” BSPT1/2” BSPT

Small BreatherSpecification

Part numberH00279001H00279002H00279003

SupersedesH00279-001H00279-002H00279-003

DescriptionSmall breather 1/4 BSPT threadSmall breather 3/8 BSPT threadSmall breather 1/2 BSPT thread


192

Flow (l/min)

Δp(b

ar)

10µ

0 500 1000 1500 20000

0.02

0.04

0.060 132 264 528

Flow (US GPM)

3940.87

0.58

0.29

0

Δp(P

SID

)

Tank Mounting

Stand Pipe Mounting

Total assembly pressure drop flow curve – 10µ elements

Ø51Strainer

3 off equispaced clamps

51.5

107

Ø 7876

Tank mounting hole

107

34

6881

149

X

Y

Z

141A

B

50.5

Flap to protect lock

2 locking screws threaded type at positionsX and Y3 locking screws push on type at positionsX, Y and Z


Reservoir Equipment

Lockable Filler BreatherInstallation Details

Lockable Filler Breather Selection

Part number

LFC622142LFC622212LFC622242LFC622432LFC622122LFC622222LFC622411

Description

Non-breathing (No element) Clamp mounting with strainer10µ nom element, G2 thread with strainer10µ nom element, clamp mounting with strainer10µ nom vented (air in) push on mounting with strainerNon-breathing (No element) 2” BSP thread with strainer10µ nom element, G21/2 thread with strainer10µ nom vented (air in) G2 thread without strainer


Reservoir Equipment

Spin-On Air Breathers


Reservoir Equipment

Spin-On Air Breathers



Specification

194

High capacity air breathers designed for the removal of airbornecontamination in hydraulic systems to support environmentalmaintenance.Ideal for high flow systems and heavily contaminatedenvironments.Disposable spin-on elements quickly and easily replaced.5 micron nominal quality filtration elements.2 models available – 700 l/min and 1500 l/min.Available with a pressurised valve in the mounting adaptor.

Note: Spin-on air breather elements canalso be mounted directly on to any suitablelength of 3/4” BSP threaded pipe.

5µ Spin-on air breathers

Circuit symbol(standard)

Circuit symbol(pressurised)

Ø94

A

B

60

6

Ø97

A

B

Ø51

Ø63

.5

Standard spin-on air breather stem

Pressurised spin-on air breather stem

Reservoir cutout Ø25 maximum

Reservoir cutout Ø25 maximum

3 off M6 fixing holesequispaced on 41.3 P.C.D.

3 off M6 fixing holesequispaced on 50 P.C.D.

Part number Supersedes Air flow Valve crackpressure

A mm

S340056S340052S340058S340059S340054S340055

B mm Weight Replacementelement

N/AN/A

*S.340058**S.340059*S.340054**S.340055

700 l/min1500 l/min700 l/min700 l/min1500 l/min1500 l/min

UnpressurisedUnpressurised

0.35 Bar0.70 Bar0.35 Bar0.70 Bar

601486060148148

120208120120208208

0.6Kg0.75Kg0.69Kg0.69Kg0.8Kg0.8Kg

493058841049304930

588410588410

Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.Note 3: Reservoir must be capable of withstanding pressurisation.



High capacity air breathers and filler/breathers designed for theremoval of airborne contamination in hydraulic systems to supportenvironmental maintenance.Ideal for high flow systems and heavily contaminated environments.Disposable spin-on elements quickly and easily replaced.3 micron absolute quality filtration elements.Models available – 1700 l/min and 3000 l/min.

Large breather dimensions Large breather filler dimensions

Mounting face for standard and large breather

Maximum operating temperature:-20°C to +90°C.

Construction materials:Epoxy coated steel components to resist corrosion.resistant paint finish on large breathers.

Fluid compatibility:Suitable for use with mineral oils and water oil emulsions.

Weights:Large: H00834001 1.0 Kg

H00834002 1.65 KgH00834003 1.90 Kg

Each breather filler is supplied with mounting gaskets andself-tapping screws.

73 PCD Ø57 hole in tank

6 fitting holesØ5.6 equispacedon 73 PCD

Ø88 boss or spot face(1.6 micron surface finish)

ØA

B C

D

E BSPT

ØA

B

C

Ø48

Large breather filter

Strainer 30 mesh(600 microns)

Specification

Part number Supersedes Air flowl/min

Dimensions (mm) Ports

H00834004H00834005

H00834-004H00834-005

17003000

97134

147198

135180

3036

3/4

11/4

Partnumber

Supersedes Air flowl/min

Dimensions (mm) Replacementelement complete

with bayonetH00834001H00834002H00834003

H00834-001H00834-002H00834-003

170030003000

97134134

165204204

114114203

A B CH00834006H00834007H00834007

Supersedes

H00834-006H00834-007H00834-007

A B C D


Parker HannifinHydraulic Filter Division EuropeFDHB200UK.

196

Notes

Reservoir Equipment

Fluid Level MeasurementFluid Level Temperature Gauges


Reservoir Equipment

Fluid Level/Temperature Gauges


Size 1 Installation Details

Installation and Application Information

Size 1 Ordering Information

Specification

198

For ‘through hole’ mounting:

–Thread–Hole size M10 M12Preferred 11.0 13.0Maximum 13.0 14.0

For tapped holes:

Holes to be tapped square to mounting face.Tolerance on hole centres: +0.5

-0.2

For welded back nuts:

The above details should be combined.

Simple to Install

The universal fixing is designed for either front or rear fixing.Just two holes in the tank – threaded for front fixing – and thegauge is ready to install. After positioning the gauge the boltsare simply tightened to provide a secure seal. There is no fearof leakage with the square section seals and the two-pointmounting system eliminates problems with tank distortion.M10 and M12 bolt thread options are available.

Easy to Read

The high-visibility lens is one-piece for added security andmoulded in shatterproof, transparent polyamide for anaccurate and clear oil level and temperature indication. Furthergauge protection is provided by a specially designed shroudmoulded in high-impact, black polystyrene.

Construction:Lens Transparent polyamide.Lens base Nylon 66.Shroud High impact polystyrene.

No aluminium content.

Bolts:Steel.

Seals:Nitrile.

Maximum working pressure:1 bar.


Fluid compatibility:Mineral and petroleum based oils.

Note:A 500mm model with metal shroud finishedin black available.

Recommended bolt tightening torque:10 Nm maximum.

Thermometer scale range:+30°C to +90°C.

Temperature Indicator:Blue alcohol.

Note:1. Locate seals in mounting recess before

fitting.2. Select the size required by studying the

installation details to determine a partnumber.

Driveslot

Blackline

Redline

43

41.5

3018

110

7617

17A

/FH

EX

18.5 24

Part number

FL69121FL69123FL69111FL69113

Supersedes

FLT.121FLT.123FL.111FL.113

Desciption

Fluid level/tempFluid level/temp

Fluid levelFluid level

Centres

76mm76mm76mm76mm

Thread

M10M12M10M12

Max temp

90°C90°C90°C90°C

Weight

0.13Kg0.13Kg0.13Kg0.13Kg







Drive slot

Black line

Red line

2418.5

41.5

1712

7

161 A

/FH

EX

177422

43

Drive slot

Blackline

Redline

2418.5

41.5

1725

428

8

A/F

HE

X17

202

22

43


Part number

FL69221FL69223FL69211FL69213

Supersedes

FLT.221FLT.223FL.211FL.213

Desciption



Centres

127mm127mm127mm127mm

Thread

M10M12M10M12

Max temp

90°C90°C90°C90°C

Weight

0.15Kg0.15Kg0.15Kg0.15Kg



Part number

FL69321FL69323FL69311FL69313

Supersedes

FLT.321FLT.323FL.311FL.313

Desciption



Centres

254mm254mm254mm254mm

Thread

M10M12M10M12

Max temp

90°C90°C90°C90°C

Weight

0.23Kg0.23Kg0.23Kg0.23Kg




200

Notes

Reservoir Equipment

Reservoir Float &Level Switches


Reservoir Equipment

FL SeriesAdjustable Float Switch

Typical Specification Installation Drawing


Features & Benefits


202

Float Switch Features Include:Float switches can be adjusted on siteReliable design using reed switches3 lengths available, 500mm, 1000mm and1500mm

HEX 36 A/F

46 56 69 77

1” BSPP thread

Polypropylene floatØ28.5

Cus

tom

erA

djus

tabl

e

35ap

prox

InstallationMounting: 1” BSP threaded headerGasket: 2.0mm thick sealing washerLength: Adjustable up to 1500mm

Electrical specificationSupply voltage: 240 Vac maximum

300 Vdc maximumSwitching current: 0.5A

Thermostat ratingsNormal voltage: 250VCurrent rating: 4A (10A max)

Material specificationHeader: Brass Stem: BrassFloat: Polypropylene Gasket: Klingersil grade C4324

to BS7531 grade Y

Other parametersFluid types: Any liquids compatible with brass and

polypropylene

The FL Series is a range of vertically mounted, single floatlevel switches operating on the proven reed switch andmagnet principle.

The FL Series float switch can be tailored by the user fora particular application, by adjusting the length of the floatswitch tube. It is also possible for the user to select theswitching configuration by inverting the float, giving eitheropen on rise or close on rise operation.

The unit is supplied part assembled, with detailed instructionsfor the user to complete assembly to the specifications of theapplication and to install the unit.

The FL Series is designed to be adjusted by the user to fittheir tank. The unit consists of a stem with the reed switch,thermal switch (if fitted) and float already set in position. Thecustomer can cut the stem to fit their tank, and assemble it tothe header. The unit is then ready to be fitted to the tank.

The unit has a factory set “Open On Rise” switchingconfiguration, but this can be changed by reversing the float.The common temperature switches used are 60°C “Open OnRise” or 60°C “Close On Rise”. However, other temperaturespecifications may be obtained on request. A standard DIN43650 connector is supplied with the unit.

Part number

FL050010RFL100010RFL150010R

Supersedes

FL-0500-1-0RFL-1000-1-0RFL-1500-1-0R

Desciption

500mm long float level switch1000mm long float level switch1500mm long float level switch



Technical Specification

Reservoir Equipment

CLS46Capacitive Level Switch

Reservoir equipment

Installation Details

Features & Benefits

203

1/4” NPTF,1/2” NPTF or 1/2” BSPT

thread

34

15.2

15

56.5

24.5

3

20.1

12.7

1.39” acrosscorners

(HEX 1.2” A/F)

12.6

Dimensions: See drawing

Electrical rating:Supply voltage: 7-40 Vdc Supply current: 3.0mAMax. load current: 1.0A Alarm delay time: 10.0 seconds

Connections:V+: Positive power supplyGND: Negative power supply or GNDOutput: Transistor switched to GND on alarmTest: Ground to operateBody: Connected to ground

Fluid types:Water based fluids compatible with brass, PTFE and flurosilicone

Construction:Body: Brass Probe: PTFETerminals: SAE CA210 brass, tin platedSeals: FlurosiliconeConnector: 30% glass filled nylon 6Environmental ratingsMax. pressure: 5.0 bar (72 PSI)Temp. ranges: Fluid: -40°C to +130°C

Ambient: -40°C to +100°CStorage: -50°C to +140°C

Sealing: IP67Vibration: 6g 10-50Hz (600-3000rpm)Shock: 50g, 6.3mSWeight: 53g

Features Include:Rugged constructionSimple to installDelay circuitry prevents false alarmsPurely electronic, no moving componentsIntegrated test feature

The CLS46 Liquid Level Switch is an active device which isdesigned to give an alarm signal if fluid falls below a preset level.It will only give an output signal after a few seconds of low level toeliminate false alarms due to turbulence. The fact that the CLS46Series has no moving parts and incorporates a built in delaymeans that it is ideal in applications where mechanically operatedswitches mis-trigger due to vibration and fluid turbulence.

The CLS46 Capacitive Level Switch is designed to detectthe loss of fluid below its position in the tank.

The CLS46 Series has no moving parts and it is thereforesuitable for all applications, particularly where space andaccess inside a vessel is at a minimum.

The CLS46 Series compliments the existing range of levelmeasurement instrumentation supplied by Parker Hannifin.


Part numberCLS46

CLS46Connector

DesciptionCapacitive fluid level sensor

Capacitive fluid level sensor connector



Reservoir Equipment

Fluid Power Products

Hydraulic system protection from Parker is further confirmed with a quality range of fluid power products that include suctionstrainers, check valves pressure gauges and a pipe clamping system that will ensure secure pipe installations.

For information on Parker Filtration products and technology:Tel: +44(0)1924 487000 Fax: +44(0)1924 487001 Email: [email protected]

204

Reservoir Equipment

Suction Elements



206

Reservoir Equipment

Suction Elements

Installation - Suction Elements Without Bypass Installation - Suction Elements with Bypass

Specification

A

ØB

Circuit symbol

C A/F HEX

Mounting thread

Circuit symbol

A

ØB

C A/F HEX

Mounting thread

Construction:Stainless steel media 30% glass filled nylonhead. Zintec centre tube.Epoxy adhesives.

Maximum working temperature:90ºC.

Filtration media:125 micron*.

Flow range:15-500 l/min.

Bypass rating:0.17 bar.

Mounting threads:G1/2 up to G3.

* Non-standard elements are available toorder. Consult Parker Filtration.

SE.1

319

0 50 100 500450150 200 250 300 350 400

Flow (l/min)

Δp(b

ar)

0

0.01

0.04

0.03

0.02

0.58

0.44

0.29

0.15

0

Δp(P

SID

)

0 13 39 79 132

Flow (US GPM)

11926 53 66 92 106

SE.1

457

SE.1221

SE.1220

SE.121

9

SE.13

26

SE.1

324

SE.1

323

SE.1

320

Ordering Information - Without Bypass

Ordering Information - With Bypass


Dimensions (mm) Weightkg

SE75111110SE75221110SE75231210SE75351210SE75351310SE75361410SE75461210SE75471310SE75481410

SE.1319SE.1320SE.1457SE.1323SE.1324SE.1326SE.1219SE.1220SE.1221

15255095130180225350500

PortsBSP

1/2

3/4

111/2

11/2

22

21/2

3

Micronrating

125125125125125125125125125

105.5109.5139.5140200260150212272

466464868686150150150

3646556565757090100

A B C0.080.150.170.280.330.400.640.720.92

Bypassrating

N/AN/AN/AN/AN/AN/AN/AN/AN/A



SE75111111SE75221111SE75231211SE75351211SE75351311SE75361411SE75461211SE75471311SE75481411

SE.5100SE.5101SE.5102SE.5103SE.5104SE.5105SE.5106SE.5107SE.5108

15255095130180225350500

PortsBSP

1/2

3/4

111/2

11/2

22

21/2

3

Micronrating

125125125125125125125125125

105.5109.5139.5140200260150212272

466464868686150150150

3646556565757090100

A B C0.110.180.210.310.360.430.670.750.95

Bypassrating

0.17 bar0.17 bar0.17 bar0.17 bar0.17 bar0.17 bar0.17 bar0.17 bar0.17 bar






Reservoir Equipment

Diffusers

Specification



Construction:Zintec body.30% glass-filled nylon head.Zintec end cap.Epoxy adhesives.

Flow range:50 l/min up to 454 l/min.

Mounting threads:G3/4 up to G2.

The effect of fitting a diffuser

Note: When installing a diffuser theplain area on the outside must befacing the pump inlet.

The benefits of specifying a Parker Filtration Diffuser

Installing a Parker Filtration Diffuser in a hydraulic reservoir isa simple operation that can make a big difference to systemefficiency.

With its special concentric tubes designed with dischargeholes 180° opposed fluid aeration, foaming and reservoir noiseare reduced and pump life extended by reducing cavitation tothe pump inlet.

Diffusers manufactured to customer specifications and othersizes of diffusers are available.

Mounting thread

120° plain area

CA

/FH

EX

ØB

A

Part number Flowl/min


2201220222102203

11422750454

PortsBSP

111/2

3/4

2

127178120242

86866286

55654675

A B C0.420.560.270.69




208

Reservoir Equipment

Inline Filters

Metal Inline Filter - Specification

Installation Details Filter Selection

Construction:Head – zinc.Bowl – AluminiumBS1470/1050A. 1987.

Element:Zintec/Stainless steel.125 micron*.

Max. flow:90 l/min.

Max working pressure:7 bar.

Thread:G1.


Seal:Nitrile.

Bowl tightening torque:12 Nm.

Flow direction:From outside to inside.

Weight:1.5 Kg.

*Alternative media can bespecified.

Construction:Housing and bowlmoulded in polyester.

Element:Stainless steel mesh.125 micron*.

Max. flow:120 l/min.

Max working pressure:7 bar.

Thread:G1.

*For alternative mediaconsult Parker FiltrationNote: When using withwater, protect from

freezing.

Working temperature:-30°C to +80°C.(+60°C water).

Seal:Nitrile.

Bowl tightening torque:12 Nm.

Bowl tightening note:A box or ring spanner isrecommended.

Flow direction:From outside to inside.

Weight:0.5 Kg.

Flow (l/min)

Δp(b

ar)

0 20 40 60 80 100 120 140 1600

0.1

0.2

0.3

0.4

0.50 5 16 42

Flow (US GPM)

3111 21 26 377.3

5.8

1.5

0

2.9 Δp(P

SID

)

4.4

Total assembly pressure drop flow curveOil Viscosity 30 cSt Relative density 0.856

0 20 40 60 80 100 120 140 1600

0.2

1.0

0.8

0.6

0.4

Flow (l/min)

Δp(b

ar)

14.5

11.6

2.9

0

5.8 Δp(P

SID

)

8.7

0 5 16 42

Flow (US GPM)

3111 21 26 37

Total assembly pressure drop flow curveOil Viscosity 30 cSt Relative density 0.856

Circuit symbol

G1

Ø78.5

10

24

48

216

160

Minimum for bowlremoval

2448 56

99

116

542 off fixingholes Ø7.2

Circuit symbol

30

Ø74

G1

Minimum for bowlremoval

6

Ø90

215

609

Ø45 63

22 A/F HEX

5749

112

Inlet

54.530

102

2 off fixingholes Ø7.5


Non-Corrodible Inline Filter - Specification


Part number Supersedes ThreadBSP

Weight

IL761151IL761251

IL.1151IL.1251

11

Appliance

OilWater

Micronrating

125125

0.50.5

Replacementelement

R.76115R.76125

Part number Flowl/min

IL1115 90

ThreadBSP

G1

Micronrating

125

Replacementelement

EIL1115

Supersedes

E.IL.1115






Ordering Examples

Reservoir Equipment

Drive Couplings


Technical Data

Materials To select coupling model check application to establishrunning load condition.Check chart for factor (F) and apply factor (F) to *Rating ofcoupling formulae. This answer you now apply to *Rating/100rev/min below.It is advisable always to check shaft sizes being used onapplication and check with dimension ‘H’.

Factor (F)Application Electric motor Petrol/diesel engineUniform load 1.00 1.20Medium shock 1.25 1.50Heavy shock 1.75 2.00

HP of application x 100 x F*Rating of coupling= rev/min of application

F

G

A A

Grub screw position

Hub withdrawalclearance

E

D

ØJ

ØH

ØC

ØB

Sectioned detail

Parker Filtration drive coupling components are orderedseparately. Here are three examples of complete assembliesordered this way.1. Complete assembly – DC28M14B04K

Made up of a DC28M14DC28B04KDC28.S (Sleeve)

Complete model DC28 drive coupling: One gear hub has14mm bore with 5mm wide keyway and other hub has a 1/2”bore with 0.125” wide keyway.Both hubs supplied with locating grub screw.

2. Complete assembly – DCR42PBPBMade up of 2x DCR42PB’s

DC42S (Sleeve)Complete model DC42 drive coupling: Both gear hubs havepilot bore of 10.5mm. Not supplied with grub screws.3. Complete assembly – DCR55PBB12K

Made up of a DCR55PBDC55B12KDC55S (Sleeve)

Complete model DC55 drive coupling: One gear hub pilotbored 5/8”, the other hub pilot bored 11/2”. Latter only suppliedwith grub screw.

Coupling halvesSintered Steel

SleeveNylon 66

Max temp sleeve83°C


DC28*DC42*DC55*

5000 0.75 1.00 0.4 40.0 66.0 44.5 38.0 4.0 104.0 84.0 28.0 10.0 7.05000 1.32 1.75 0.75 42.0 90.0 60.0 42.0 4.0 115.0 88.0 42.0 14.0 10.54000 6.00 8.00 2.05 59.0 125.0 83.0 65.0 4.0 158.0 122.0 55.0 19.0 16.0 min

38.1 max

Max *Rating/ –H– Jspeed 100 rev/min Weight A B C D E F G max min pilot

Part number prefix rev/min kW hp mm mm mm mm mm mm mm bore bore bore

Height of keyway from base of boreMetric Imperial

Standard bore BS 4500, (1985) BS 1916, Part 1, (1985)Standard keyway BS 4325, Part 1 (1980) BS 46, Part 1, (1985)

Assembly data1. Maximum angular misalignment is ±2°. Maximum radial misalignment is ±0.4mm.2. Ensure that the Parker Filtration drive coupling gear hubs are an easy fit to their respective shafts.

Do not use heavy blows to force the hubs on.3. When in position, the hubs should have a gap of 4mm as denoted by ‘E’ dimension.4. Tighten grub screws to locate both gear hubs on to their respective shafts.

Part number Supersedes Dimensions (mm) Weight

Ø Bore Width Height


210

Reservoir Equipment

Drive Couplings


Model DC.28


DC28M16DC28M19DC28M20DC28M22DC28M24DC28M25DC28M28DCR28PB

DC28SDC28M10DC28M11DC28M14DC28M18DC28B03KDC28B04KDC28B05KDC28B06KDC28B07KDC28B08KDC28B09K

DC.28.M16DC.28.M19DC.28.M20DC.28.M22DC.28.M24DC.28.M25DC.28.M28DCR.28.PB

DC.28.SDC.28.M10DC.28.M11DC.28.M14DC.28.M18DC.28.B03KDC.28.B04KDC.28.B05KDC.28.B06KDC.28.B07KDC.28.B08KDC.28.B09K

16.0mm19.0mm20.0mm22.0mm24.0mm25.0mm28.0mm

N/AN/A

10.0mm11.0mm14.0mm18.0mm

7/16

1/2

5/8

3/4

7/8

111/8

5.0mm6.0mm6.0mm6.0mm8.0mm8.0mm8.0mm8.0mm

N/A3.0mm4.0mm5.0mm6.0mm

0.125 ins0.125 ins0.188 ins0.188 ins0.250 ins0.250 ins0.313 ins

18.4mm21.9mm22.9mm24.9mm27.5mm28.5mm31.5mm

N/AN/A

11.5mm12.9mm16.4mm20.9mm0.50 ins0.57 ins0.72 ins0.84 ins0.99 ins1.12 ins1.24 ins

Rangefrom 0.259Kgto 0.411Kg



Model DC.42

DC42M25DC42M28DC42M30DC42M35DC42M38DC42M42DCR42PB

DC42SDC42M18DC42M19DC42M20DC42M22DC42M24DC42M32DC42B05KDC42B06KDC42B07KDC42B08KDC42B09KDC42B10KDC42B11KDC42B12KDC42B13K

DC.42.M25DC.42.M28DC.42.M30DC.42.M35DC.42.M38DC.42.M42DCR.42.PB

DC.42.SDC.42.M18DC.42.M19DC.42.M20DC.42.M22DC.42.M24DC.42.M32DC.42.B05KDC.42.B06KDC.42.B07KDC.42.B08KDC.42.B09KDC.42.B10KDC.42.B11KDC.42.B12KDC.42.B13K

25.0mm28.0mm30.0mm35.0mm38.0mm42.0mm

N/AN/A

18.0mm19.0mm20.0mm22.0mm24.0mm32.0mm

5/8

3/4

7/8

111/8

11/4

13/8

11/2

15/8

8.0mm8.0mm8.0mm10.0mm10.0mm12.0mm12.0mm

N/A6.0mm6.0mm6.0mm6.0mm8.0mm10.0mm0.188 ins0.188 ins0.250 ins0.250 ins0.313 ins0.313 ins0.375 ins0.375 ins0.439 ins

28.5mm31.5mm33.5mm38.5mm41.5mm45.5mm

N/AN/A

20.9mm21.9mm22.9mm24.9mm27.5mm35.5mm0.72 ins0.84 ins0.99 ins1.12 ins1.24 ins1.37 ins1.49 ins1.61 ins1.76 ins

Rangefrom 0.436Kgto 0.753Kg



Model DC.55

DCR55PBDC55S

DC55M25DC55M28DC55M30DC55M32DC55M35DC55M38DC55M42DC55M55DC55B09KDC55B10KDC55B11KDC55B12KDC55B13KDC55B14KDC55B15KDC55B16KDC55B17K

DCR.55.PBDC.55.S

DC.55.M25DC.55.M28DC.55.M30DC.55.M32DC.55.M35DC.55.M38DC.55.M42DC.55.M55DC.55.B09KDC.55.B10KDC.55.B11KDC.55.B12KDC.55.B13KDC.55.B14KDC.55.B15KDC.55.B16KDC.55.B17K

N/AN/A

25.0mm28.0mm30.0mm32.0mm35.0mm38.0mm42.0mm55.0mm

11/8

11/4

13/8

11/2

15/8

13/4

17/8

221/8

16.0mmN/A

8.0mm8.0mm8.0mm10.0mm10.0mm10.0mm12.0mm16.0mm0.313 ins0.313 ins0.375 ins0.375 ins0.439 ins0.439 ins0.501 ins0.501 ins0.626 ins

N/AN/A

28.5mm33.5mm33.5mm35.5mm38.5mm41.5mm45.5mm59.5mm1.24 ins1.37 ins1.49 ins1.61 ins1.76 ins1.89 ins2.01 ins2.13 ins2.31 ins

Rangefrom 1.248 Kg

– 2.046 Kg

Pipe Clamp System

Multiclamp


Pipe Clamp System

Multiclamp

When only the best ClampingSystem will do ....specify Multiclamp

Multiclamp is a system. A system ofcomponents, each one engineered toa high standard – that together build toprovide effective, all-purpose pipeworkclamping. Multiclamp offers creativeand cost-effective environmentalbenefits to the system designer andinstaller. Creating accurate runs ofvarying diameter tubes, pipes, hosesand cables in all industries.

Secure Multiclamp installationsensure a leak free, noise free andvibration free system.

The neat design of pipe line runs offerseasy maintenance of machinery andplant equipment. Visual planning of lineruns is straightforward with Multiclamp– accurate installations can be achievedwithout skilled labour – keeping costsdown and quality up.


Planning with Multiclamp

These notes have been compiled to assist in planning yourMulticlamp system.

Multiclamp offers considerable flexibility. For example, it can fitin with a factory installation that is being built in phases.

Should a last minute change in pipe diameter occur duringinstallation, an alternative rubber bush is likely to be all that isrequired. Not a complete and expensive re-think of the installation.

Multiclamp metal components can be sprayed to match avehicle livery or plant installation and, if installed properly,should require no maintenance.

Installation is simple and requires no experience

Anyone can use Multiclamp and only the basic, everyday toolsare required.

From one pipe to almost any number – because each Multiclamp‘position’ can be visually sighted and its position adjusted – analmost guaranteed straight run can be obtained. Equally, changesof plane or direction can be achieved simply and securely.

Group pipe sizes together to obtain the most economical useof three basic Multiclamp Series.

Some sites will require all pipes mounted in one single plane– either vertical or horizontal.

When stacked modules are preferred, the only work to bedone on the Multiclamp is to saw off the desired length.

If a large number of pipe lines are to be run, it is recommendedthat the upper clamping unit is simply cut into two lines only,and progressively assembled by securing two pipes at a time.It will be recognised that most odd lengths on site will be used,and one man can easily cope with a large number of pipe linesby this simple progressive build up. This assembly will provideeasy access for servicing and replacing pipes. This methodalso reduces the quantity of Stacking Nuts and Studs by 50%.

If a factory installation is being built in phases, it would bewise to leave the first phase with a lower clamping unit andStacking Nuts in position ready to receive pipe runs for thenext building phase.

Your maximum pipe size will determine the series to use. There is adegree of versatility provided by the rubber bushes. You choose fromsingle or multistacked Multiclamp, whichever suits your particularinstallation requirements.

Series 106.0mm-20.0mm(1/4”-3/4”)

Series 166.0mm-28.0mm(1/4”-1”)

Series 3210.0mm-50.0mm(3/8”-2”)

Stacked modules or single module

Fixing points to suit

Stacking stud andnut not requiredin this position

212

Material Specifications

Zinc plated steel with anti-corrosive, full passivate. Multiclampcan also be multi-stacked using stacking studs and nuts.Series 10 and 16 clamp is supplied in lengths of 603mm andSeries 32 in lengths of 1206mm. These can be simply cut tothe required lengths for installation.

Series 10 will accept pipe or hose diameters from 6mm upto 20mm maximum. Series 16 from 6mm up to 28mm andSeries 32 from 10mm up to 50mm. Across the 3 Series, thereare 26 different high-quality split rubber bushes to select fromto cope with any combination and number of different pipeand hose diameters in the same run.

Specification

Dimension details supplied in product configurator

Multiclamp – 12 or 16 holes Split Bushes

B C CTS ( B )

Ø

A

E

FR

EF

B C C B

D

A

E

F

Series 10PAT.1170557

Series 10PAT.1170557

ThetfordEngland

C

G

HR

EF

A BØ

D E

F

Ø

B

A

Pipe size

1 set of clamping units = 1 pair Split bushes are ordered in sets onlyi.e. 1 set of bushes = 10 bushes of one size

Double ClampSingle Clamp


Mounting adaptors are not orderedin sets. i.e. 1 off mounting adaptors= 1 single piece.

Weld plates are ordered in sets only.i.e. 1 set of weld plates= 10 weld plates.

B

AØ B

A

C

D

EF

Thre

ad

A

BA

B

Thre

ad

Stacking studs are ordered in setsonly. i.e. 1 set of stacking studs= 50 stacking studs of one size.

Stacking nuts are ordered in sets only.i.e. 1 set of stacking nuts= 50 stacking nuts of one size.

Note: For stainless steel version please consult Parker.

Stacking Nuts Stacking Studs Mounting Adaptors Weld Plate


214

Pipe Clamp System

MulticlampOrdering Information - Series 10

Series 16Ordering Information -

Part number Supersedes Description Dimensions (mm) Thread

MC101MC102MC1016MCN10MCS10

MCWP10MCSB10

MCB10MO

MC.10.1MC.10.2MC.10.16MC.N.10MC.S.10

MC.WP.10MC.SB.10

MC.B.10.MO

Single clampDouble clamp16 bay clampStacking nutStacking stud

Weld plateStandard bolt

Mounting adaptor

Packquantity

10 pairs10 pairs1 pair

505010501

25.025.034.011.032.013.3

27.0

8.58.538.133.021.025.0

25.0

38.138.125.0

2.610.0

A B C55.093.015.0

6.3

D19.019.038.1

25.0

E38.038.0601.5

8.5

F

19.0

G

38.0

H9.09.09.0

8.7

Ø

M8 x 1.25M8 x 1.25

M8 x 1.25

Packweight

0.60 Kg1.00 Kg0.80 Kg0.80 Kg0.50 Kg0.35 Kg0.55 Kg0.02 Kg

Product configurator

Part number Supersedes Description Dimensions (mm) Pipe size

MCG105MCG106MCG108MCG1010MCG1012MCG104

MC.G.10.5MC.G.10.6MC.G.10.8MC.G.10.10MC.G.10.12MC.G.10.4

Split bushSplit bushSplit bushSplit bushSplit bushSplit bush

Packquantity

101010101010

25.525.525.525.525.525.5

A27.027.027.027.027.027.0

B810

12-1415-1618-20

6

(mm)5/163/81/25/83/41/4

OD

Packweight

0.13 Kg0.12 Kg0.12 Kg0.10 Kg0.90 Kg0.13 Kg




MCWP10MCSB10

MCB16MO

MC.16.1MC.16.2MC.16.12MC.N.16MC.S.10

MC.WP.10MC.SB.10

MC.B.16.MO



Mounting adaptor

Packquantity


505010501

25.025.047.011.032.013.3

27.0

7.07.050.844.021.025.0

36.0

50.850.825.0

2.610.0

A B C65.0116.021.0

6.3

D23.823.850.8

25.0

E47.647.6608.8

8.5

F

25.0

G

51.0

H9.09.09.0

8.7

Ø

M8 x 1.25M8 x 1.25

M8 x 1.25

Packweight




MCG165MCG166MCG168MCG1610MCG1612MCG1614MCG1616MCG1618MCG164

MC.G.16.5MC.G.16.6MC.G.16.8MC.G.16.10MC.G.16.12MC.G.16.14MC.G.16.16MC.G.16.18MC.G.16.4

Split bushSplit bushSplit bushSplit bushSplit bushSplit bushSplit bushSplit bushSplit bush

Packquantity

101010101010101010

35.435.435.435.435.435.435.435.435.4

A27.027.027.027.027.027.027.027.027.0

B810

12-1415-1618-2022.025.028.0

6

(mm)5/163/81/25/83/47/81

1/4

OD

Packweight

0.28 Kg0.28 Kg0.26 Kg0.22 Kg0.20 Kg0.18 Kg0.14 Kg0.16 Kg0.28 Kg



Series 32Ordering Information -

How to ‘build’ Multiclamp



MCWP32MCSB32

MCB32MO

MC.32.1MC.32.2MC.32.16MC.N.32MC.S.32

MC.WP.32MC.SB.32

MC.B.32.MO



Mounting adaptor

Packquantity


505010501

40.041.072.013.038.017.5

40.0

9.49.476.271.522.032.0

58.0

76.276.240.0

4.012.0

A B C95.0171.034.0

8.0

D38.038.076.2

32.0

E76.276.2

1211.0

11.0

F

38.5

G

77.0

H11.111.111.0

10.7

Ø

M10 x 1.5M10 x 1.5

M10 x 1.5

Packweight




MCG3210MCG3212MCG3216MCG3218MCG3220MCG3224MCG3232MCG326MCG328MCG3214MCG3226

MC.G.32.10MC.G.32.12MC.G.32.16MC.G.32.18MC.G.32.20MC.G.32.24MC.G.32.32MC.G.32.6MC.G.32.8MC.G.32.14MC.G.32.26

Split bushSplit bushSplit bushSplit bushSplit bushSplit bushSplit bushSplit bushSplit bushSplit bushSplit bush

Packquantity

1010101010101010101010

59.059.059.059.059.059.059.059.059.059.059.0

A44.544.544.544.544.544.544.544.544.544.544.5

B15-1618-20

2528-3032-3435-38

5010

12-142242

(mm)5/83/41

1 1/41 1/4

23/81/27/8

OD

Packweight

1.10 Kg1.10 Kg1.00 Kg1.00 Kg0.80 Kg0.80 Kg0.40 Kg1.30 Kg1.20 Kg1.00 Kg0.60 Kg


1 2 3

4 5 6

7 8 9

Reservoir Equipment

Inline Check Valves

Specification


216


Technical Data Ordering Information

Construction:Steel UNI 5105.

Ball and spring:Chrome finished steel.

Retainer:Nylon.

Flow rates:From 20 l/min to 150 l/min.

Max. working pressure:350 bar.

Valve crack pressures:0.35 and 4.5 bar.

Circuit symbol

A B A/F HEX

Thread

2301230223032304230523112312231323142315

203050100150203050100150

0.350.350.350.350.354.504.504.504.504.50

1/4

3/8

1/2

3/4

11/4

3/8

1/2

3/4

1

5466778810854657788108

19243036461924303646

0.090.170.320.480.990.090.170.320.480.99

CrackingFlow pressure Thread A B Weight

Part number l/min bar G mm mm Kg

2301

2302

2303

2304

2305

0 20 40 22020060 80 100 120 140 160 180

Flow (l/min)

Δp(b

ar)

0

0.5

1.0

4.0

3.5

3.0

2.5

2.0

1.5

58

43.5

29

14.5

0

Δp(P

SID

)

0 5 21 37 58

Flow (US GPM)

5311 16 26 31 42 47

Pressure Drop Flow Curves Standard products table


Reservoir Equipment

Single Station Gauge Isolator Valves

Specification

Single Station Installation Details

Operation Details

Construction:Single Station: Cast iron and steel. Knurledaluminium knob with ‘Twist to lock’ or ‘pushto read’ type.

Max. working pressure:350 bar.

Port size:Single Station: G1/4.

Weight:Single Station: 0.90 Kg.

GI1486GI1414

Part number

Single station gauge isolator “twist to lock” typeSingle station gauge isolator “push to read” type

Description

0.90 Kg0.90 Kg

Weight

80.0

20.0 SQ

13.0

57.0

91.0

90.0

G1/4 TYP3 positions

Circuit symbol

27.0

28.0

54.0

26.0

29.0

27.7

21.0

36.0

HEX nut 38.0 A/F

G

PDR

Single Station

Ordering InformationStandard products table

Symbol

25

23

15

2

Ø9.

5Ø5

Snubber fittedG1/4 (1/4” BSP)

14 A/F HEX

Reservoir Equipment

63mm Dia. Pressure Gauges

Specification


218


Construction:Case: Natural finish stainless

steel.Window: Non-splintering clear

acrylic glass.Movement: Cu alloy.Dial: White plastic, with

pointer stop pin.Pointer: Black plastic.

Liquid filling:Glycerine 99.7%.

Working pressure:Max 75% of the full scale value.

Process temperature:+ 60°C maximum.

Accuracy:1.6% FSD.

Wetted parts connector:Copper alloy.

Bourdon tube:< 60 bar = Cu alloy, C-type,soft soldered.> 60 bar = Cu alloy, helical type,soft soldered.

Note: It is recommended that allglycerine gauges should be mountedin the vertical position with gaugecase relief valve uppermost. Pressurerange up to 1000 bar available.

Bottom Connection

Panel Mounting

Panel Mounted (3-hole flange)

Note 1: Part numbers featured with bold highlighted codes will ensurea ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you tocontact Parker Filtration for availability.*Note 3: Any subsequent changes to gauge accuracy will be notified.

13 32 68 62 6.5 G1/4 54 14 0.21

a b D1 D2 e G h SW Weight±0.5 ±1 Kg

Dimensions (mm) Bottom Connection

32 56 68 62 6.5 G1/4 14 0.21

b b2 D1 D2 e G SW Weight±0.5 ±1 Kg

Dimensions (mm) Panel Mounting (Lower Back)

Note 1: Panel cut-out 64.5 ±0.5Note 2: 13mm on the outside radius required to allow for fixing clamp.


75 85 3.6

D1 D2 D3

Dimensions (mm)

Note 1: Gauge dimensions as forpanel mounting option abovewith flange as shown below.

Note 2: Panel cut-out for 3-holemounting 67±0.3.

ØD2

ØD1

120°

120°

ØD3

Ordering InformationMounting Stem Detail

Part numberPGB0631010PGB0631016PGB0631025PGB0631040PGB0631060PGB0631100PGB0631160PGB0631250PGB0631400PGB0631600PGB0631004

SupersedesPGB.0631.010PGB.0631.016PGB.0631.025PGB.0631.040PGB.0631.060PGB.0631.100PGB.0631.160PGB.0631.250PGB.0631.400PGB.0631.600

PGB.0631.004

Pressure range0-10 bar0-16 bar0-25 bar0-40 bar0-60 bar0-100 bar0-160 bar0-250 bar0-400 bar0-600 bar0-4 bar

Connector typeG1/4 BottomG1/4 BottomG1/4 BottomG1/4 BottomG1/4 BottomG1/4 BottomG1/4 BottomG1/4 BottomG1/4 BottomG1/4 BottomG1/4 Bottom

Part numberPGC0631010PGC0631016PGC0631025PGC0631040PGC0631060PGC0631100PGC0631160PGC0631250PGC0631400PGC0631004PGC0631600

SupersedesPGC.0631.010PGC.0631.016PGC.0631.025PGC.0631.040PGC.0631.060PGC.0631.100PGC.0631.160PGC.0631.250PGC.0631.400

PGC.0631.004PGC.0631.600

Pressure range0-10 bar0-16 bar0-25 bar0-40 bar0-60 bar0-100 bar0-160 bar0-250 bar0-400 bar0-4 bar

0-600 bar

Connector typeG1/4 PanelG1/4 PanelG1/4 PanelG1/4 PanelG1/4 PanelG1/4 PanelG1/4 PanelG1/4 PanelG1/4 PanelG1/4 PanelG1/4 Panel

Part numberPGF0631060PGF0631100PGF0631160PGF0631250PGF0631400PGF0631004PGF0631010PGF0631016PGF0631025PGF0631040PGF0631600

SupersedesPGF.0631.060PGF.0631.100PGF.0631.160PGF.0631.250PGF.0631.400

PGF.0631.004PGF.0631.010PGF.0631.016PGF.0631.025PGF.0631.040PGF.0631.600


Connector typeG1/4 Panel FlangeG1/4 Panel FlangeG1/4 Panel FlangeG1/4 Panel FlangeG1/4 Panel FlangeG1/4 Panel FlangeG1/4 Panel FlangeG1/4 Panel FlangeG1/4 Panel FlangeG1/4 Panel FlangeG1/4 Panel Flange

Panel Mounting (Lower Back)Bottom ConnectionD1

SW

G

h

ØD

2

b

a

e

SW

e

ØD

2

bb2

G

D1

45°

109±1


Reservoir Equipment

100mm Dia. Pressure Gauges

Specification

Note 1: Part numbers featured with bold highlighted codes will ensurea ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you tocontact Parker Filtration for availability.*Note 3: Any subsequent changes to gauge accuracy will be notified.

Symbol

43

39

25

5

Ø17

.5

Ø6

Snubber fittedG1/2 (1/2” BSP)

22 A/F HEX


Construction:Case: BS 304 S15 stainless

steel.Window: Acrylic.Movement: Brass.Dial: White aluminium.Pointer: Black aluminium.

Liquid filling:Glycerine 98%.

Working pressure:Full scale value.

Process temperature:+ 60°C maximum.

Accuracy:1.0% FSD.

Wetted parts connector:Copper alloy.

Bourdon tube:< 100 bar = Cu alloy, c-type,soft soldered.> 100 bar = stainless steel 1.4571,helical type, brazed.

Note: It is recommended that allglycerine gauges should be mountedin the vertical position with gaugecase relief valve uppermost.

15.5 48 107 100 8 G1/2 87 22 0.80

a b D1 D2 e G h SW Weight±0.5 ±1 Kg

Dimensions (mm) Bottom Connection

48 81.5 107 100 8 G1/2 22 0.80

b b2 D1 D2 e G SW Weight±0.5 ±1 Kg

Dimensions (mm) Panel Mounting (Lower Back)

Note 1: Panel cut-out 102 ±1.0Note 2: 13mm on the outside radius required to allow for fixing clamp.


116 132 4.8

D1 D2 D3

Dimensions (mm)

Note 1: Gauge dimensions as forpanel mounting option abovewith flange as shown below.

Note 2: Panel cut-out for 3-holemounting 104±0.5.

ØD2

ØD1

120°

120°

ØD3

Ordering InformationMounting Stem Detail

Bottom Connection

Panel Mounting


Part numberPGB1001250PGB1001400PGB1001010PGB1001016PGB1001025PGB1001040PGB1001060PGB1001100PGB1001160PGB1001600PGB10011000

SupersedesPGB.1001.250PGB.1001.400PGB.1001.010PGB.1001.016PGB.1001.025PGB.1001.040PGB.1001.060PGB.1001.100PGB.1001.160PGB.1001.600PGB.1001.1000


Connector typeG1/2 BottomG1/2 BottomG1/2 BottomG1/2 BottomG1/2 BottomG1/2 BottomG1/2 BottomG1/2 BottomG1/2 BottomG1/2 BottomG1/2 Bottom

Part numberPGE1001010PGE1001016PGE1001025PGE1001040PGE1001060PGE1001100PGE1001160PGE1001250PGE1001400PGE1001600PGE10011000

SupersedesPGE.1001.010PGE.1001.016PGE.1001.025PGE.1001.040PGE.1001.060PGE.1001.100PGE.1001.160PGE.1001.250PGE.1001.400PGE.1001.600PGE.1001.1000


Connector typeG1/2 PanelG1/2 PanelG1/2 PanelG1/2 PanelG1/2 PanelG1/2 PanelG1/2 PanelG1/2 PanelG1/2 PanelG1/2 PanelG1/2 Panel

Part numberPG.1001250PGF1001400PGF1001010PGF1001016PGF1001025PGF1001040PGF1001060PGF1001100PGF1001160PGF1001600PGF10011000

SupersedesPGF.1001.250PGF.1001.400PGF.1001.010PGF.1001.016PGF.1001.025PGF.1001.040PGF.1001.060PGF.1001.100PGF.1001.160PGF.1001.600PGF.1001.1000


Connector typeG1/2 Panel FlangeG1/2 Panel FlangeG1/2 Panel FlangeG1/2 Panel FlangeG1/2 Panel FlangeG1/2 Panel FlangeG1/2 Panel FlangeG1/2 Panel FlangeG1/2 Panel FlangeG1/2 Panel FlangeG1/2 Panel Flange

Panel Mounting (Lower Back)Bottom ConnectionD1

SW

G

h

ØD

2

b

a

e

SW

e

ØD

2

bb2

G

D1

45°

109±1


220

Notes

ipmen Glass Filled Nylon and MetalBreathersretem.com/Pictures/Parker Accessories[1].pdf · Glass-Filled Nylon and MetalBreathers IP65Rated,Metal,Screw-on and Lockables Reservoirequipment

Documents