7/18/2019 iPASO LCT Training Manual(3NOV) http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 1/179 0 iPASOLINK LCT WEB Nov 2010 Issue-4
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 1/179
0
iPASOLINK LCT WEB
Nov 2010 Issue-4
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 2/179
TOPC-E4011E-02- 1
LCT COMMUNICATION INTERFACE
THE LOCAL CRAFT TERMINAL IS USED TO SETUP, MONITOR AND MAINTAIN iPASOLINK RADIO. iPASOLINK
SUPPLY USER GUI ENVIRONMENT THROUGH WEB BROWSER. LCT SUPPORTS BOTH LOCAL AND REMOTE
CONNECTIONS
WINDOWS XP WINDOWS VISTA & WINDOWS 7
CPU PENTIUM-M 1.6 GHz OR BETTER INTEL CORE2 DUO 1.6 GHz
RAM 512 MB OR MORE 1 GB
HDD 40 GB OR MORE FREE CAPACITY 40 GB OR MORE FREE CAPACITY
DISPLAY COLOR LCD (1024x768) COLOR LCD (1024x768)
LAN
PORT
10/100 Base T(X) 10/100 Base T(X)
SOFTWARE REQUIREMENT
OS
WIN DOWS XP (ENGLISH VERSION)
WINDOWS VISTA (ENGLISH VERSION)
WINDOWS 7 (ENGLISH VERSION)
IE8, IE7, FIREFOX 3.6 OR HIGHER
COMMUNICATION BETWEEN THE LCT AND THE
IPASOLINK IS VIA THE LCT PORT OF IDU
CONNECTED BY LAN CABLE.
10/100 Base-TX (RJ-45)
SET THE PC INTERNET PROTOCOL,
TCP IP PROPERTIES TO “OBTAIN IP
ADDRESS AUTOMATICALLY “ AND“OBTAIN DSN SERVER ADDRESS
AUTOMATICALLY”
LCT Port supports DHCP Default
IP address is 172.17.254.253
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 3/179
2
LCT Startup and Login
Start the browser Internet Explorer and enter the URL
http://172.17.254.253/weblct/ to open the WebLCTLogin screen.
Enter the “User Name” and “Password” in the
provided text boxes and Click Ok button
Default Username : Admin
Password: 12345678
LCT main menu opens in the “Current Status screen”
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 4/179
3
WebLCT LOGOUT
To Logout of the WebLCT, click on the Logout buttonon the top right hand of the LCT screen.
When Logout Confirm window appears, Click Yes
LCT Login window appears
Close the Browser window to exit WebLCT.
Always Logout using this button before
disconnecting the cable.
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 5/179
4
USER NAMES & PRIVILEGES
Category ADMIN CONFIG USER REMOTE
File OperationUp/Down
Load
Up/Down
Load
Upload
only
SNMP Operation Get/Set Get/Set Get
EASY SETUP
EASY SETUP R/WMODEM SETUP R/W
MANAGEMENT SETUP R/W
ETH SETUP R/W
TDM SETUP R/W
EQUIPMENT SETUP
EQUIPMENT CONFIGURATION R/W R R
RADIO CONFIGURATION R/W R/W R
AMR CONFIGURATION R/W R/W R
NETWORK MANAGEMENT
CONFIGURATION
GENERAL SETTING R/W R R
GENERAL SETTING (DETAIL) R/W R RROUTING SETTING R/W R R
PROVISIONING
MODEM FUNCTION
SETTING
MODEM PORT SETTING R/W R/W R
RADIO SWITCH SETTING R/W R/W R
TX POWER SETTING R/W R/W R
ALM MODE SETTING R/W R/W R
ETH FUNCTION SETTING
BRIDGE SETTING R/W R/W R
ETH PORT SETTING R/W R/W R
VLAN SETTING R/W R/W RFDB SETTING R/W R/W R
ETH OAM SETTING R/W R/W R
RSTP SETTING R/W R/W R
QoS /CLASSIFICATION SETTING R
FILTER SETTING R/W R/W R
OTHER ETH PORT SETTING R/W R/W R
LLF SETTING R/W R/W R
USER: User is able to confirm
system configuration andequipment status. It is not available
to make any configuration change.
Password :87654321
Default Group: :OPERATOR
CONFIG - Beside of the function
can be performed by User , Config
user is able to do radio
management, base-band
management, Switching functionmanagement for C-Plane control.
Password: 87654321
Default Group: CONFIG
ADMIN - Beside of the function can
be performed by Config user,
Admin user is able to do database
management, file management,
user management and time
management for M-Plane control.Password: 12345678
Default Group: ADMIN
REMOTE -Functions available
When User access Remotely but
restricted by the assigned access
level
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 6/179
5
USER NAMES & PRIVILEGES
CATEGORY ADMIN CONFIG USER REMOTE
PROVISIONING
E1/ STM1/CROSS CONNECT
SETTING
CROSS CONNECT SETTING R/W R/W R
E1 PORT SETTING R/W R/W R
STM-1 PORT SETTING R/W R/W R
EXT CLOCK SETTINGEQUIPMENT CLOCK SETTING R/W R/W R
EXT CLOCK SETTING R/W R/W R
RELAY ALARM MAPPING
SETTING
RELAY CONTROL SETTING R/W R/W R
CLUSTER ALARM SETTING R/W R/W R
V.11/ OW SETTING
V.11/SC SETTING R/W R/W R
V.11/DIRECTIONAL SETTING R/W R/W R
OW SETTING R/W R/W R
ALARM /AIS SETTING
CORRELATION/ DELAY _ STRETCH SETTING R/W R/W R
ALARM SEVERITY SETTING R/W R/W R
COLOR SETTING R/W R
AIS SETTING R/W R/W R
BER THRESH HOLD SETTING R/W R/W R
PMON / RMON THRESHOLD
SETTING
PMON THRESHOLD R/W R/W R
PMON OTHER R/W R/W R
RMON THRESHOLD R/W R/W R
RMON OTHER R/W R/W R
AUX SETTINGAUX INPUT SETTING R/W R/W R
AUX OUTPUT SETTING R/W R/W R
MAINTENANCE
LOOPBACK CONTROL
MODEM LOOPBACK CONTROL R/W R/W R
TDM LOOPBACK CONTROL (E1 LB1) R/W R/W R
TDM LOOPBACK CONTROL (E1 LB2) R/W R/W R
TDM LOOPBACK CONTROL (STM-1 LB1) R/W R/W R
TDM LOOPBACK CONTROL (STM-1 LB2) R/W R/W R
PROTECTION CONTROL
MODEM TX/TX SW CONTROL R/W R/W R
RSTP SW CONTROL R/W R
SNCP SW CONTROL R/W R/W R
TIMING SOURCE SW CONTROL R/W R/W R
USER: User is able to confirm
system configuration and
equipment status. It is notavailable to make any
configuration change.
Password :87654321
Default Group: :OPERATOR
CONFIG - Beside of the functioncan be performed by User ,
Config user is able to do radio
management, baseband
management, Switching
function management for C-Plane control.
Password: 87654321
Default Group: CONFIG
ADMIN - beside of the function
can be performed by Config
user, Admin user is able to do
database management, file
management, user
management and time
management for M-Planecontrol.
Password: 12345678
Default Group: ADMIN
REMOTE -Functions available
When User access Remotely but
restricted by the assigned access
level
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 7/179
6
USER NAMES & PRIVILEGES
CATEGORY ADMIN CONFIG USER REMOTE
MODEM MAINTENANCE CONTROL R/W R/W R
AUTO LASER SHUTDOWN CONTROL R/W R/W R
H/W_F/W RESET
CONTROL
H/W RESET CONTROL R/W R/W R
F/W RESET CONTROL R/W R/W R
PMON / RMON/ FDB CLEAR R/W R R
OFFLINE MAINTENANCE
MAINTENANCE TEST ETH OAM LB/LT/LM/DM CONTROL R/W R/W R
CURRENT HISTORY PMON/RMON REPORT
MODEM PMON REPORT R
E1 PMON REPORT R
STM-1 PMON REPORT R
ETH RMON REPORT R
VLAN COUNTER REPORT R
ETH OAM COUNTER REPORT R
METERING
CURRENT METERING R
USER ACCOUNT / SECURITY SETTING
LOGIN USER R/W
USER ACCOUNT MANAGEMENT R/W
USER GROUP PROFILE CONFIGURATION R/W
SECURITY
MANAGEMENTSECURITY STATUS SETTING R/W R R
INVENTORY
EQUIPMENT INVENTORY INFORMATION R/W R/W R
S/W LICENSE INFORMATION R/W R/W R
S/W LICENSE SETUP
IMPORT LICENSE KEY R/W R
RADIO CAPACITY SETTING R/W R
♦
USER: User is able to confirm
system configuration and
equipment status. It is not
available to make anyconfiguration change.
Password :87654321
Default Group: :OPERATOR
CONFIG - Beside of the function
can be performed by User ,Config user is able to do radio
management, base band
management, Switching function
management for C-Plane control.
Password: 87654321
Default Group: CONFIG
ADMIN - Beside of the functioncan be performed by Config
user, Admin user is able to do
database management, file
management, user
management and time
management for M-Plane
control.
Password: 12345678
Default Group: ADMIN
REMOTE - Functions available
When User access Remotely but
restricted by the assigned access
level
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 8/179
7
WebLCT Initial Screen
Login User Name
Indicate the currentlogged in user
Summary Alarm Indication
Indicate the summary alarm of ODU, IDU,AUX I/O, TCN, & Maintenance Status
Opposite Site Links
Connect
Maintenance
Maintenance ON/OFF button
Logout
Logout button
Menu tree
Indicate the LCT MainMenu
Block Diagram
Indicate the ODU,IDU and Interfaces
mounted
Detail Display
Display detail alarm & status informationof items selected from the Tabs
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 9/179
8
Block Diagram
Block Diagram of IDU with
two ODUs connected and
STM-1 option
Block Diagram of IDU with
one ODU connected and
additional 16 X E1 option
Block Diagram of IDU with
one ODU connected and
additional 16 X E1 , AUX
and PS Input options
Block Diagram of IDU with one ODUs connected and
STM-1 option
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 10/179
9
Active Alarms & Event Log
Click on the Active Alarm Tab
to see details of current Alarms
Click on Save button to save the active
alarm list to the PC
Click on Event Log tab to see the even
Log information. Click save to save theevent log to a CSV file
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 11/179
10
ODU & IDU Detail Alarm and Status
Click on the ODU icon in the block diagram or
the ODU tab to see the detail alarm and status
information of the ODUs
Click on the IDU block diagram or the IDU tab to see the detail alarm and status
information of the IDU and its mounted
modules
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 12/179
11
WebLCT Main Menu
Menus for Metering
Equipment Utility
User Account / Security
S/W License setup
Can be accessed by selecting the check box “ Detail Menu ”
Click the “Expand All” icon to expand all menu
items and click “ Collapsed All” icon to collapse
the menu items
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 13/179
12
Main Menu
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 14/179
13
Provisioning Menu
Click the “+” to expand each
main menu folder and see the
sub-menu items
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 15/179
14
Maintenance Menu
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 16/179
15
EQUIPMENT SETUP
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 17/179
16
EQUIPMENT CONFIGURATION (1 of 5)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 18/179
17
EQUIPMENT CONFIGURATION (2 of 5)
Equipment Name
Equipment Configuration shows
the mounted option boards.
Modem SW/ XPIC GRP Configuration
shows how the Modem 1 and 2 are used.
Connected ODU
information and IDU
(Modem) Settings
Adaptive Modulation
Radio Settings
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 19/179
18
EQUIPMENT CONFIGURATION (3 of 5)
2 (1+0) Configuration
Equipment Current status
(1+1) Hot Standby
Configuration(1+0) XPIC Configuration
(1+0) Configuration
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 20/179
19
EQUIPMENT CONFIGURATION (4 of 5)
Click on the Setup Icon to open the setup 1 Setting of Equipment
Name window.
1
1
Left side shows the current setting. Click on the Equipment Name
field in the New setting in the right hand of the window. And enter the
new name. (up to 32 characters)
If you exceed the number of characters, the entry field border turns to
red and when the cursor is moved to the entry field pop –up will show
the limits
2Click on the Next Button to go to next setting
window. If the name field characters exceed,
Input Error warning popup appears.
2
Setting of SW/ XPIC Group window allows setting of how the twomodems are used. For (1+1) configuration click on the check box
SW/ XPIC GRP and click on the drop down arrow and select the
required option. Other wise click on modem 1 or modem 2 and select
used or not used.
3
3 Click the Next button to go to the next setting window
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 21/179
20
EQUIPMENT CONFIGURATION – (5 of 5 )
Modifications to be
applied are highlighted
Click the OK button to
apply the changes
Following warning ask to
confirm the change, click
to continue OK
Information window show
the changes complete,
click OK
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 22/179
21
RADIO CONFIGURATION (1 of 4 )
Modem configuration
Item Parameter Description
Channel Spacing 7/14/28/56 [MHz] Specify the radio channel spacing
Reference
Modulation
QPSK
16/32/64/128/256[QAM]
Specify the reference modulation
from the list
Radio Mode High Capacity/ High SystemGain
Specify the Radio Mode
E1 Mapping 0 to 152 [CH] Specify the number of E1 CH for
mapping. (The number of CH
should not exceed the limitation
of the specified modulation.)
STM-1 Mapping 0 to 1 [CH] Specify the number of STM-1 CH
for mapping.
ETH Bandwidth [Mbps] Display the bandwidth of the
ether traffic
TX RF Frequency xxxxx.xxx [MHz] Enter transmit frequency
RX RF Frequency xxxxx.xxx [MHz] receive frequency (automatically)
Frame ID 1 - 32 Set frame ID
TX Power Control MTPC/ATPC Set transmit power control mode
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 23/179
22
RADIO CONFIGURATION (2 of 4)
Click the Equipment Setup Menu and select
Radio Configuration to open the Equipment
Setup – Radio configuration window.
Click the Setup Icon to open the Setup 1 Detailed MODEM
Setting of SW/XPIC GRP or Slot Unit window.
Radio configuration window shows
the existing radio configuration
including the ODU frequency,
parameters of radio channel 1 and 2.
Modem 1 and 2 configuration
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 24/179
23
RADIO CONFIGURATION (3 of 4)
Green border on the Set
Position section modem
configuration show the
selected modem
Specification and information of the ODU
connected to the selected Modem
Current setup of the selected
modem „s radio configuration
Select the channel spacing ofthe radio signal
Select the reference Modulation
of the radio signal
Radio Mode: select High capacity or
High system Gain. High system gain
is achieved by better FEC.
Select the number of E1 channels
to be used
Select the number of STM-1
channels to be used (need STM-1
optional Interface card )
Show the available Ether bandwidth
after E1 and STM-1 traffic mapping.
Select the TX Power Control Mode.
ATPC or MTPC. Parameter setting for
each mode is from provisioning menu Enter the radio signal Frame ID (1 ~ 32)
Enter TX/RX point frequency within the
Start and Stop frequency of the ODU
shown above.
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 25/179
24
RADIO CONFIGURATION (4 of 4)
Changed parameters are highlighted in blue.
Confirm the changes and click the Ok button
Change the setting for Modem 2
and click the Next button
Select the Channel spacing to be used from the drop down list
Select the Reference or fixed modulation to be used from the
drop down list
Select the High system Gain or High Capacity
Select the maximum number of E1 to be used
Select whether STM-1 is to be used in the through mode
Confirm the available Ether band width
After changing the setting for Modem 1 and click the Next
button
Set the TX & RX Frequency
Select the Frame ID to be used (1 ~ 32)
TX Power control mode ATPC or MTPC
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 26/179
25
AMR Configuration (1 of 4)
Show the current Configuration for Modem 1 and 2
Set the AMR Modulation for Modem 1 & Click Next
Set the AMR priority traffic for Modem 1 & Click Next to set the Modem 2.
Item Parameter
E1 Mapping QPSK
Select following items.
- E1 Mapping (Range: 0 - 152)
- STM-1 Mapping (Range: 0 - 1)
- ETH Bandwidth is calculated from E1 and STM-1
mapping
16 QAM
32 QAM
64 QAM
128 QAM
256 QAM
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 27/179
26
AMR CONFIGURATION (2 of 4)
Select AMR Operation by clicking the AMR Mode radio button.
Select Non Operation radio button not to use the AMR function
Reference Modulation selected in Equipment Setup is shown
highlighted in green.
Select the other modulations to be used during AMR operation
by selecting the appropriate Used radio button
Click the Next button to set the E1 / STM-1 mapping.
Enter the priority E1 channels to be used for each modulation
during the AMR operation in E1 Mapping for each modulation
If STM-1 through mode is used select which modulation
schemes to be used during AMR operation provided that theradio capacity is available.
Capacity remaining for Ethernet bandwidth is shown
automatically.
Click the Next button to set the AMR operation and E1/STM-1
mapping for Modem 2.
E1/STM-1 Mapping Settings:
Priorities for preservation of traffic (E1/STM1/Ethernet) as
modulation level (and therefore transmission capacity)
decreases
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 28/179
27
AMR CONFIGURATION (3 of 4)
SET E1/STM-1 MAPPING FOR MODEM-1
SET AMR FOR MODEM-1
SET AMR FOR MODEM-2
SET E1/STM-1 MAPPING FOR MODEM-2AMR CONFIRMATION SCREEN
( f )
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 29/179
28
AMR CONFIGURATION (4 of 4)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 30/179
29
NETWORK MANAGEMENT
GENERAL SETTING
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 31/179
30
GENERAL SETTING
Item Parameter Description
IP Address Setting (Bridge 1)
IP Address x.x.x.x Input IP Address of NMS port
Subnet Mask x.x.x.x Input Subnet Mask of NMS port
Default Gateway x.x.x.x Input Default Gateway IP
address
NMS Port Setting
Connect NMS Port to
NMS
Yes Use NMS Port (for root NE only)
No Not use NMS Port
E l f i L l & R E d
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 32/179
31
Example for setting on Local & Remote Ends
PC for Remote LCT
NMS Port
Management LAN
254
C i i NMS P & LCT A
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 33/179
32
Connection via NMS Port & LCT Access
Browse local IP Address: http://192.168.1.10/
Browse Remote IP Address: http://192.168.1.20/
GENERAL SETTING (DETAIL) 1 f 5
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 34/179
33
GENERAL SETTING (DETAIL) 1 of 5
GENERAL SETTING (DETAIL) 2 f 5
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 35/179
34
GENERAL SETTING (DETAIL) 2 of 5Item Paramet
er
Description
NE2 Port Setting
NE2 Port
IP Address
x.x.x.x Input IP Address of NE2 port
NE2 Port
Usage
Used Use NE2 port
Not Used Not use NE2 port
NE2 Port
Speed
9600 specify the line speed of NE2
port219200
Ethernet Port Setting (NMS / NE1 Port)
Usage Used Use Ethernet port
Not Used Not use Ethernet port
Auto
Negotiation
Enable enable the Auto Negotiation of
Ethernet portDisable Disable the Auto Negotiation of
Ethernet port
Discovery
Usage
Used search of the network access
machinery using Ethernet
connect
Not Used
NE Branch Setting
Branch
Number
1 to 4
Branches
Select the Branch Number
Default
Gateway
x.x.x.x Input the Default Gateway
Restrict LCT Connection
LCT Port
Setting
Any Connection from Local/Remote
to LCT Port
Only to Local
NE
only connection from Local to
LCT Port
GENERAL SETTING (DETAIL) 3 f 5
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 36/179
35
GENERAL SETTING (DETAIL) 3 of 5
GENERAL SETTING (DETAIL) 4 of 5
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 37/179
36
GENERAL SETTING (DETAIL) 4 of 5
When NE2 (RJ-45) port is used for serial connection to
other PASOLINK configure this NE2 Port Setting
Select usage of NMS and NE1 ports set the port parameters
accordingly
LCT Port Setting : select “any” radio button to connect to
remote NEs. From the local LCT Port
Select “Only to Local NE” radio button to prevent connection
to remote NE from local LCT port.
GENERAL SETTING (detail) 5 of 5
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 38/179
37
GENERAL SETTING (detail) 5 of 5
Select to which branch NMS port belongs to
Select to which branch Modem-2 port belongs to
Select the number of branches the NE belongs to
ROUTING SETTING
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 39/179
38
ROUTING SETTING
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 40/179
39
PROVISIONING
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 41/179
40
MODEM FUNCTION SETTING
MODEM PORT SETTING
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 42/179
41
MODEM PORT SETTING
Select Modem Function
Setting on the provisioning
menu and click on the Modem
Port setting to enter the Modem
port Name Enter the Modem Port Name ( 32 Characters)
Enter the Modem Port Name ( 32 Characters)
RADIO SWITCH SETTING (1 of 2)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 43/179
42
RADIO SWITCH SETTING (1 of 2)
Select provisioning menu and click on the Radio Switch setting to enter
the switch setting for (1+1) configuration.
Click the SW GRP1 (Modem 1/2) to open the switching parameter
setting dialog box.
Following functions can be set by this item.
TX & RX switching priority
TX Switch Lock in Usage
TX Switch Reverse function
RX Switch condition early warning
Item Parameter Description
TX SW Priority Non
Priority
Selecting non revertive mode
No.1 Select No.1 when both No.1 and
No.2 are normally operating.
TX SW Lockin
Usage
Used enable TX SW Lockin function
Not Used disable TX SW Lockin function
TX SW Reverse
Function Usage
Used enable Reverse Function
Not Used disable Reverse Function
RX SW Priority Non
Priority
Selecting non revertive mod
No.1 Select No.1 when both No.1 and
No.2 are normally operating.
RADIO SWITCH SETTING (2 of 2)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 44/179
43
RADIO SWITCH SETTING (2 of 2)
TX & RX SW PRIORITY (ONLY FOR HOT STANDBY)
NON PRIORITY: SELECT THIS FOR NON HOMING SWITCHING.
PRIORITY NO.1: SELECT THIS FOR HOMING SWITCHING. WHEN BOTH
CHANNELS ARE NORMAL ALWAYS USE No.1 AS ONLINE.
WHEN CH NO.1 FAILS SWITCH TO CH NO.2, WHEN CH NO.1 IS NORMALIZED
SWITCH BACK TO CH NO.1 AUTOMATICALLY.
TX SW REVERSE FUNCTION USAGE:
THIS FUNCTION APPLIES TO 1+1 HOT STANDBY CONFIGURATION WITH TX
SWITCH SET TO NON PRIORITY
WHEN BOTH RECEIVE FAILS DUE TO OPPOSITE STATION TX MAIN ANTENNA
MISALIGNMENT, AND REVERSE FUNCTION IS SET TO USED, THEN SENDS A
SILENT ALARM TO TX SIDE TO SWITCH TX ODU TO STANDBY ODU.
CRITERIA IS, RX LEV ALM OBSERVED FROM BOTH CHANNELS FOR MORE
THAN 120 SEC. THEN SILENT ALM IS SENT TO TX SIDE TO SWITCH TX ODU
TO ODU 2
TX SW LOCKIN USAGE
THIS FUNCTION APPLIES TO 1+1 HOT STANDBY CONFIGURATION WITH TX
SWITCH SET TO PRIORITY NO.1
IN THE CASE WHEN DUE TO INTERMITTENT ODU1 FAILURE IT SWITCHES
FROM ODU1 TO ODU2 AND BACK TO ODU1 REPEATEDLY AND LOCK IN
USAGE IS SELECTED USED, TX SWITCH WILL BE LOCKED TO ODU2 TO
PREVENT FREQUENT SWITCHING
CRITERIA IS, DURING 10MIN PERIOD IF SWITCHING OCCURS 10 TIMES, TX
WILL BE LOCKED TO ODU2. IT WILL BE RELEASED AFTER 24 HOURS IF NO
ALARMS ARE OBSERVED ON ODU1.
RX SW CONDITION EARLY WARNING:
INCLUDE EW: SELECT THIS TO INCLUDE EW AS A CRITERIA FOR AUTO
REDUNDANCY SWITCHING IN (1+1) CONFIGURATION
EXCLUDE EW: SELECT THIS TO EXCLUDE EW AS A CRITERIA FOR AUTO
REDUNDANCY SWITCHING IN (1+1) CONFIGURATION
EARLY WARNING BER SETTING IS 1E-9
TX POWER SETTING
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 45/179
44
TX POWER SETTING
MTPC MODE: MANUAL TRANSMIT POWER CONTROL MODE
MPTC TX POWER : ENTER A VALUE IN dBm WITHIN THE RANGE INDICATED
ATPC THRESHOLD: ENTER THE RX THRESHOLD VALUE TO BE USED WHEN OPPOSITE STATION IS IN ATPC MODE
(SET IN 1 dB STEPS) NOT IN AMR MODE
ATPC MODE:
ATPC THRESHOLD: ENTER THE RX THRESHOLD VALUE TO BE USED WHEN OPPOSITE STATION IS IN ATPC MOD E(FIXED
MODULATION)
ATPC RANGE (MAX): MAXIMUM POWER LEVEL UNDER ATPC CONTROL IS DEFINED BY THIS ITEM (Set the value in dBm)
ATPC RANGE (MIN): MINIMUM POWER LEVEL UNDER ATPC CONTROL IS DEFINED BY THIS ITEM (Set the value in dBm)
AMR
Mode
Fixed
Modulation
ATPC
ALARM MODE SETTING
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 46/179
45
ALARM MODE SETTING
ALARM MODE:
ATPC POWER MODE: THIS ITEM DEFINE THE ODU TX POWER SETTING DURING ATPC CONTROL FAILURE
HOLD: TO MAINTAIN THE CURRENT TX POWER AT THE TIME OF ATPC CONTROL FAILURE
SELECT : MAX: TO TRANSMIT AT ATPC MAX POWER LEVEL AT THE TIME OF ATPC CONTROL FAILURE
MIN: TO TRANSMIT AT ATPC MIN POWER LEVEL AT THE TIME OF ATPC CONTROL FAILURE
COMM ALM MODE : THIS ITEM SELECT THE ACTION TO BE TAKEN
WHEN THE COMMUNICATION BETWEEN IDUAND ODU FAILS.
SELECT MUTE: TO STOP TX OUTPUT POWER
HOLD : TO KEEP TRANSMITTING THE TX OUTPUT
POWER
XPIC SETTING
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 47/179
46
XPIC SETTING
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 48/179
47
E1 / STM-1 / CROSS CONNECT SETTING
Provisioning – E1 Port setting (1 of 2)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 49/179
48
Provisioning E1 Port setting (1 of 2)
SELECT E1 PORT SETTING FROM THE
PROVISIONING - E1/STM-1/ CROSS CONNECT
SETTING MENU
INDICATE THE CURRENT SETTING:
E1 CHANNELS USED
IMPEDANCE SETTING FOR EACH E1 CHANNEL
SERVICE NAME FOR EACH E1 CHANNEL
CH USAGE ERROR REPORT/NOT REPORT
CLICK THE EDIT ICON TO CONFIGURE THE E1
PORT SETTING
Provisioning – E1 Port setting (2 of 2)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 50/179
49
Provisioning E1 Port setting (2 of 2)
COLLECTIVE SETTING ALLOWS ALL E1 CHANNELS TO BE SET
TO THE SAME CONFIGURATION
USED ALL CH OR NOT USED ALL (SELECT RADIO BUTTON)
CH USAGE ERROR REPORT ALL / NOT REPORT ALL (SELECT
RADIO BUTTON)
IMPEDANCE ALL CH 120 OHM OR ALL CH 75 OHM ( SELECT
RADIO BUTTON)
CH USAGE :- SELECT E1 CHANNELS TO BE USED BY
SELECTING THE USED RADIO BUTTON. NOT USED RADIO
BUTTON INHIBIT ALARMS FROM THE SELECTED CHANNEL
E1 PORT IMPEDANCE:- SELECT THE IMPEDANCE OF THE E1
CHANNELS TO BE 120 OHMS OR 75 OHMS. SELECT THE
APPROPRIATE RADIO BUTTONS.
SERVICE NAME:- ENTER THE SERVICED NAME FOR EACH E1
CHANNEL. (MAX 32 CHARACTERS)
CH USAGE ERROR REPORT:- SELECT REPORT RADIO
BUTTON TO RAISE AN ALARM WHEN AN E1 SIGNAL IS
DETECTED AT HE INPUT OF A CHANNEL SELECTED AS NOT
USED
Provisioning – STM-1 Port setting (1 of 4)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 51/179
50
Provisioning STM 1 Port setting (1 of 4)
SELECT STM-1 PORT SETTING FROM THE
PROVISIONING - E1/STM-1/ CROSS
CONNECT SETTING MENU
CLICK THE EDIT ICON TO OPEN THE STM-1
PORT SETTING WINDOW
Provisioning – STM-1 Port setting (1 of 4)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 52/179
51
Provisioning STM 1 Port setting (1 of 4)
WHEN STM-1 IS SELECTED AS THROUGH MODE
Provisioning – STM-1 Port setting (2 of 4)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 53/179
52
Provisioning STM 1 Port setting (2 of 4)
Item Parameter Description
STM-1 Mode Through Through Mode of STM-1
Channelized Channelized Mode of STM-1
Port Usage Used use STM-1 Port
Not Used not user STM-1 Port
Port Name 1 to 32 character specify the port name of the STM-1
MS - AIS Generation Enable enable device stop output laser when receiving STM1
signal lost (optical or radio) (RLOS) and send out MS-
AIS.
Disable disable device stop output laser when receiving STM1
signal lost (optical or radio) (RLOS) and send out MS-
AIS
ALS Usage Enable enable ALS (Auto Laser Shutdown)
Disable disable ALS (Auto Laser Shutdown)
ALS Interval 60 sec set the delay of release ALS after restored
180 sec
300 sec
Trace Mismatch Detection Disable disable TIM detection
Enable J0 enable RS-TIM detection
Enable J1 enable HP-TIM detection
Trace Mismatch AIS Generation Action Enable enable transmit AIS alarm when TIM detected
Disable disable transmit AIS alarm when TIM detectedSection Trace Send 1 to 15 set J0 in transmit direction
Expected Section Trace 1 to 15 set J0 in receiving direction
High Order Path Trace - Not select
Expected High Order Path Trace - Not select
Received Trace Value
Received select trace Port 01 - Not select
Received High Order Path Trace - Not select
Provisioning – STM-1 Port setting (3 of 4)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 54/179
53
Provisioning STM 1 Port setting (3 of 4)
STM-1 MODE SETTING:
SELECT THROUGH RADIO BUTTON TO TRANSMIT STM-1
OVER THE RADIO FRAME
SELECT CHANNELIZED RADIO BUTTON TO EXTRACT THE 63
E1 FROM THE STM-1. AND SELECTIVELY USE THEM.
PORT SETTING:
PORT USAGE: SELECT USED TO USE THE STM-1 PORT OR
NOT USED TO NOT SELECT THE STM-1 PORT. SELECT THE
APPROPRIATE RADIO BUTTON.
PORT NAME: ENTER A NAME FOR THE STM-1 CHANNEL
(MAX 32 CHARACTERS)
MS-AIS GENERATION SETTING IS USED TO STOP SENDING
MS-AIS SIGNAL DUE TO RADIO LINK OR EQUIPMENT
FAILURE.
WHEN DISABLED:- DURING FAILURE OPTICAL INTFC WILL
STOP TRANSMITTING THE OPTICAL SIGNAL, ELECTRICAL
INTFC WILL SEND UNFRAMED AIS.
WHEN ENABLED:- SEND MS-AIS DUE TO RADIO LINK OR
EQUIPMENT FAILURE.
AUTOMATIC LASER SHUT DOWN (ALS) FUNCTION IS AVAILABLE ONLY FOR OPTICAL INTFC . DURING LOS OF SIGNAL AT THE INPUT
OF THE OPTICAL INTFC IT WILL CUT THE LASER OUTPUT FROM THE OUTPUT OF THE OPTICAL INTFC. DURING THIS TIME AT
DEFINED INTERVALS INTFC WILL OUTPUT A 2 SEC LASER PULSE.
SELECT ENABLE OR DISABLE FROM THE ALS FUNCTION RADIO BUTTON
IF ENABLE IS SELECTED, SELECT ALS INTERVAL FROM 60, 180, AND 300 SEC .
Provisioning – STM-1 Port setting (4 of 4 )
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 55/179
54
Provisioning STM 1 Port setting (4 of 4 )
TRACE SETTING:
ENABLE OR DISABLE J0 OR J1 TRACE MIS MATCH
DETECTION
WHEN TRACE MISMATCH IS DETECTED WHETHER TOENABLE OR DISABLE AIS GENERATION
ENTER THE TX TRACE PATTERN
ENTER THE EXPECTED RX TRACE PATTERN
TRACE SETTING:
WHEN HIGHER ORDER PATH TRACE IS ENABLED ENTERTHE HO PATH TRACE PATTERN AND THE EXPECTED RX
PATTERN
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 56/179
55
CROSS CONNECT SETTING
Provisioning – Cross connect setting
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 57/179
56
g g
Provisioning – Cross connect setting
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 58/179
57
g g
Item Parameter Description
No 1 to 168 Cross Connect Service Number
Service Name 0 to 32 characters Cross Connect Service Name
Cross Connect Type E1 E1 level Cross Connect
RST enable user to observe the port (CH) utilization
Edge. A ProtectionProtection Check the radio box If Protection is checked, Edge .A Term 2 need to be specified.
Edge .A Term 1 ifIndex Slot-Port-CH
Edge .A Term 2 ifIndex Slot-Port-CH
Edge .B Protection
Protection Check the radio box If Protection is checked, Edge. B Term 2 need to be specified.
Edge B Term 1 ifIndex Slot-Port-CH
Edge .B Term 2 ifIndex Slot-Port-CH
Cross Connect - SNCP
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 59/179
58
Cross Connect – Modify / Delete
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 60/179
59
y /
Cross- connect – AMR Linkage
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 61/179
60
g
Radio E1
mapping
Priority E1 channels during AMR operation
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 62/179
61
EQUIPMENT CLOCK/ SYNCHRONIZATION
Clock/Synchronization(w/o CLK Card)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 63/179
62
ONE SIDE INTERNAL CLOCK
AS MASTER
OTHER SIDE MODEM OR
AUTO AS SLAVE
SELECT EQUIPMENT CLOCK FROM THE PROVISIONING
EQUIPMENT CLOCK / SYNCHRONIZATION SETTING MENU
CURRENT EQUIPMENT CLOCK MODE AND SELECTED
CLOCK SOURCE IS INDICATED.
CLICK THE EDIT ICON TO SET / CHANGE EQUIPMENT
CLOCK SETTING
SELECT THE CLOCK SOURCE TO BE USED
FROM THE DROP DOWN LIST
INTERNAL: SET EQUIPMENT CLOCK MODE TO
MASTER
MODEM : SLAVE TO THE CLOCK FROM THE
RADIO DIRECTION
AUTO: TO AUTOMATICALLY SLAVE TO
MODEM OR INTERNAL
Provisioning – Clock/Synchronization
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 64/179
63
SELECT EQUIPMENT CLOCK FROM THE PROVISIONING
EQUIPMENT CLOCK / SYNCHRONIZATION SETTING MENU
CURRENT EQUIPMENT CLOCK MODE AND SELECTED
CLOCK SOURCE IS INDICATED.
CLICK THE EDIT ICON TO SET / CHANGE EQUIPMENT
CLOCK SETTING
AFTER SELECTING THE EQUIPMENT CLOCK SETTINGCLICK THE OK BUTTON
CLICK OK BUTTON ON THE TIMING LOOP WARNING
DIALOG BOX
Synchronization method
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 65/179
64
Synchronous Ethernet
PDH Line Transmit Clk
SDH Line Transmit Clk
G.703 External Clk Output
Radio Clk Output
iPASOLINK can utilize multiple clock sources.
PLLTiming Source 1
Timing Source 2
Timing Source 3
SELSEL
Modem-1
Modem-2
E1 Line CLK
Option Line CLK(STM1)
GbE Line CLK
External CLK IN
SEL
External CLK OUT
Provisioning – Clock/Synchronization
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 66/179
65
EQUIPMENT CLOCK MODE : SELECT THE CLOCK MODE TO BE
USED IN THE IDU.
SELECT MASTER OR SLAVE RADIO BUTTON AS APPLICABLE
THREE TIMING SOURCES CAN BE SELECTED . AVAILABLE
TIMING SOURCES DEPENDS ON THE OPTION CARDS
MOUNTED. NO. 1 AND 2 CAN SELECT FROM THE
FOLLOWING SOURCES:
IF E1 CHANNELS ARE USED E1 LINE CLOCK IS AVAILABLE
AS A TIMING SOURCE
IF STM-1 CARD OPTION IS USED IN CHANNELIZED MODE
THEN OPTION LINE CLK (STM1 CAN BE USED AS A TIMING
SOURCE.
IF STM-1 IS USED IN THROUGH MODE IT IS NOT AVAILABLE
AS A TIMING SOURCE.
MODEM 1 AND 2 CAN BE SELECTED AS A TIMING SOURCE
THIRD TIMING SOURCE IS EXTERNAL CLOCK.
TIMINGSOURCE
PORT/CH PRIORITY REMARKS
MODEM 1 PORT-1 1 TO 12 FROM RADIO DIRECTION
MODEM 2 PORT-1 1 TO 12 FROM RADIO DIRECTION
E1 LINE CLK CH 01-16 1 TO 12
OPTION LINECLK (STM1)
LINE 1 1 TO 12 CHANNELIZED STM-1 OPTION
EXTERNAL CLK
WTR : SET WAIT TO RESTORE TIME, WHICH IS THE
AMOUNT OF TIME TO WAIT BEFORE A RECOVERED TIMING
SOURCE BECOMES ACTIVE AGAIN. (0 THRU 15 MIN)
Clock/Synchronization – EXT Clock Setting
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 67/179
66
SELECT EXT CLOCK SETTING FROM THE PROVISIONING
EQUIPMENT CLOCK / SYNCHRONIZATION SETTING MENU
CURRENT EXT CLOCK SETTING IS INDICATED.
Click the Edit icon to open the Ext Clock setting Window.
Item Parameter Description
EXT Impedance 120 Ω set Ext Clock impedance to 120 Ω
70 Ω set Ext Clock impedance to 75 Ω
EXT CLK Interface bps select the Ext Clock in bps
Hz select the Ext Clock in Hz
CRC On/Off On turn on Ext Clock CRC check
Off turn off Ext Clock CRC check
EXT CLK Out SEL NOT SELECT CLK out not used
NE CLK Use NE CLK
DMR Line CLK 1 Use DMR Line CLK1
DMR Line CLK2 Use DMR Line CLK2
GbE Line CLK Use GbE Line CLK
E1 Line CLK Use E1 Line CLK
Option Line CLK Use Option Line CLK (STM-1)
Select the appropriate radio buttons to set the EXT CLK IN/OUT
parameters
Select the Clock source to be used for EXT Clock Out
Click the OK Button
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 68/179
67
RELAY-ALARM MAPPING SETTING
Provisioning – Relay-Alarm Mapping
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 69/179
68
Provisioning – Relay-Alarm Setting
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 70/179
69
Provisioning – Cluster Alarm
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 71/179
70
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 72/179
71
V.11 / OW SETTING
SERVICE CHANNELS / OW
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 73/179
72
DSC 1 ~ DSC 4 DSC 1 ~ DSC 42x RS 232C
2 x V.11
PDH RADIO OH
iPASOLINK USER
CHANNELS
2 x RS 232C
2 x V.11
2 x RS 232C
2 x V.11
iPASOLINK USER
CHANNELS
iPASOLINK USER
CHANNELS
STM-1INTFC
E1, F1, DCCr
STM-1INTFC
E1, F1, DCCr
STM-1INTFC
E1, F1, DCCr
OW OWOW
Through
V.11 / SC SETTING 1of 3
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 74/179
73
V.11/SC setting menu provides
the configuration of user
interface (V.11, RS-232C) and
OW channel.
Click the SC Channel , and
Modem1 /2 to assign the related
service channel assignments
STM-1S is available when the STM-1
port is used as channelized. Select to
assign E1 ,F1 and DCCr to Service
channels over the radio
SC through setting
User CH to SC setting
V.11 / SC SETTING 2 of 3
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 75/179
74
Expand Provisioning from LCT menu.
Expand V.11/OW Setting from Provisioning sub menu.
Select V.11/SC Setting from V.11/OW Setting sub menu.
V.11/SC Setting window appears. Click SC Channel
Example: To assign user channel RS-232-C Ch1 to modem-1 SC1
Click on the rectangle intercepting the RS-232C-1 row and SC1column, assignment is indicated by the green color.
Similarly to assign the user channel V.11 Ch1 to modem-1 SC2
Click on the rectangle intercepting the V.11-1 row and SC2 column,
assignment is indicated by the green color.
Click OK to set the assignment
Confirm the assignment in Provisioning-V.11/OW setting – V.11/SC setting window
Select Modem 1 from the Slot drop down list
V.11 / SC SETTING 3 of 3
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 76/179
75
Example: To assign Modem 2 , SC3 through to modem 1 SC-3
Click on the rectangle intercepting the SC-3 row of Modem 2 and
SC3 column , assignment is indicated by the green color.Similarly to assign the Modem 2 , SC4 to Modem 1 SC4
Click the rectangle intercepting the Modem 2 , SC4 row and SC4
column, assignment is indicated by the green color.
Click OK to set the assignment
Confirm the assignment in Provisioning-V.11/OW setting – V.11/SC setting window
Select Modem 1 from the Slot drop down list
Click Modem 2 in the Provisioning – V.11/OW Setting-V.11/SC Setting window
V.11 Directional Setting
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 77/179
76
Item Parameter Description
V.11-1/2 Direction Setting Co-Directional the data receiving
direction is same as
the clock output /input
direction
Contra-Directional the data receiving
direction is different
from the clock
output/input direction
Expand Provisioning from LCT menu.
Expand V.11/OW Setting from Provisioning sub menu.
Select V.11 Directional Setting from V.11/OW Setting sub menu.
V.11 Directional Setting window appears
Click the radio button Co-Directional or Contra-Directional as
appropriate.
Click the OK Button
Current Direction setting
OW SETTING
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 78/179
77
Expand Provisioning from LCT menu.
Expand V.11/OW Setting from Provisioning sub menu.
Select OW Setting from V.11/OW Setting sub menu.
Click the Modem 1 or Modem 2 to open the OW Setting (Modem 1- 1+0) window
Click the OK Button
Current Order Wire setting
Select Used radio button to enable DSC channel for OW
Select Not Used radio button to disable DSC channel for OW
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 79/179
78
ALARM / AIS SETTING
CORRELATION SETTING
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 80/179
79
Item Parameter Description
Alarm
Correlation
On enable mask the lower level alarm
Off disable mask the lower level alarm
From the Provisioning menu. Select Alarm/AIS Setting sub menuSelect Correlation Setting from Alarm/AIS Setting sub menu.
Correlation Setting window appears. Click Edit button.
Select the Alarm correlation ON radio Button to enable masking lof over level alarms
Select the Alarm correlation OFF radio Button to disable masking of lover level alarms
Click OK button and to set the changes.
AIS Setting
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 81/179
80
Item Parameter Description
AIS Activation
Delay
On enable sending AIS alarm in the
specified the intervalOff sending AIS alarm without delay
AIS Activation
Condition
LOF + High BER sending AIS alarm after received
LOF and High BER alarm
LOF sending AIS alarm after received
LOF alarm only.
AIS Generated
Report
Report report AIS generated event
Not Report do not report AIS generated event
AIS Received
Report
Report report AIS received event
Not Report do not report AIS received event
AIS Received
Condition
Alarm specify the AIS received event as
an alarm event
Status specify the AIS received event as
a status event
AIS setting function allows to change the
behavior when the AIS signal is received,
activated and whether to report or not to
report the AIS alarms .
Severity Color Setting
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 82/179
82
Expand Provisioning from LCT menu.Expand Alarm/AIS Setting from Provisioning sub menu.
Select Color Setting from Alarm/AIS Setting sub menu.
Color Setting window appears. Click Edit button.
Color setting window opens .
Click the severity item that require changing
Select new severity color from the color choice window and click OK
Confirm that the severity color is changed in the color setting window.Click OK button to close the color setting window
AUX Input Setting (1 of 2)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 83/179
83
Expand Provisioning from LCT menu.
Expand AUX Setting from Provisioning sub menu.
Select AUX Input Setting from AUX Setting sub menu.
AUX Input Setting window appears. Click the tabs to see the
current setting for each AUX input.
AUX Input Setting ( 2 of 2)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 84/179
84
Click on the tab to select the AUX input to be set or modified
Click OK button to close the window
Click on the Modify icon to open the AUX input Setting for AUX#
Name : Enter the name for the alarm (32 Characters)
Condition : Select from the drop down list alarm input condition
Alarm when Event ON (close): [Report when Alarm is ON]
Alarm when Event OFF (Open): [Report when alarm is OFF]
Status : Event is considered as a Status Event not alarm event
Status String : Enter the text to be shown when the Event is ON
and OFF (32 Characters)
Status String : Enter the text to be shown when the Event is ON
and OFF (32 Characters)
X.733: Select the Severity, Alarm Type and Probable cause for
the event from the drop down list for each item
AUX Output Setting (1 of 2)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 85/179
85
Expand Provisioning from LCT menu.
Expand AUX Setting from Provisioning sub menu.
Select AUX Output Setting from AUX Setting sub menu.
Click the each tab and assign the alarms to the Relays 01 to 06.
Click OK button to close the window
AUX Output Setting (2 of 2)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 86/179
86
Select the 16E1-S tab to see the current assignment of Relays 16E1 interface alarms
Click the Modify icon to open the Relay Control setting window for 16E1 – S,
Assign the Alarms to the relays
Click OK button to close the window
AUX Output Setting (2 of 2)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 87/179
87
Select the AUX-S tab to see the current assignment
of Relays for House Keeping Control and Cluster
Alarm Out.
Click the Modify icon to open the Relay Control
setting window for AUX – S,
Assign Relays for House Keeping Control and
Cluster Alarm Out.
Make sure that HK Out and Cluster Alarm out are
not assigned to the same relay
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 88/179
88
PMON / RMON Setting
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 89/179
Provisioning – PMON / RMON Setting
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 90/179
90
Provisioning – PMON / RMON Setting
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 91/179
91
Provisioning – PMON / RMON Setting
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 92/179
92
Provisioning – PMON / RMON Setting
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 93/179
93
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 94/179
94
MAINTENANCE CONTROL
Maintenance
Loopback Control
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 95/179
95
Loopback Control
- IF Loopback Control
- TDM Loopback Control (E1 LB1/LB2)
- TDM Loopback Control (STM1 LB1/LB2)
H/W F/W Reset
- HW Reset Control
- FW Reset Control
Protection Control
- Modem TX / RX switch Control- RSTP Control
- SNCP Switch Control
- Timing source switch Control
Auto Laser Shutdown Control
- Laser Shutdown Control
- ALS Manual Switch Control
Performance Monitor
- MODEM PMON Report
- E1 PMON Report
- STM-1 PMON Report
- PMON/RMON/FDB Clear
Offline Maintenance
- Data Adjust
- RF Sub Band Select
Modem Maintenance Control
- ATPC Manual Control
- TX Mute Control
- CW Control
- TX Modulation Manual Control
- XPIC Reset (1+0 XPIC only)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 96/179
96
LOOPBACK CONTROL
MAINT Control- Modem Loopback
IF loopback cuts the TX output
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 97/179
97
Off
If Maintenance mode is selected
before applying the maintenance
control “ Switch to Maintenance
mode first error message
appears
IF loopback cuts the TX output
affecting the radio link
Parameter
IF Loopback
Off Turn on the IF Loopback function (Default)
On Turn off IF Loopback function
Release Time
not release Not set automatic restore
90 sec (Default)
180 sec
300 sec
3600 sec (60 min)
43200 sec (12h)
Set automatic restore time
* Available when executing IF Loopback from remote NE.
MAINT Control- Modem Loopback
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 98/179
98
Click on Maintenance button on the top of LCT window to enter maintenance mode.
Expand the Maintenance Control from LCT menu 。
Expand the Loopback Control from Maintenance Control sub menu.
Select the MODEM Loopback Control from Loopback Control sub menu.
MODEM Loopback Control Window is displayed. Click on Off of the IF Loopback field.
Click on Off of the IF Loopback field to open the Modem Loopback Control (Modem1 – 1+0)
Select IF Loopback ON radio button to select loopback On.
If the IF Loopback is for the remote NE, then select the Release time
Click OK button to apply the maintenance control. Off indication will turn to On with
Yellow background
MAINT Control- TDM Loopback1
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 99/179
99
Click on Maintenance button on the top of LCT window to enter maintenance mode.
Expand the Maintenance Control from LCT menu 。
Expand the Loopback Control from Maintenance Control sub menu.
Select the TDM Loopback Control (E1 LB1) from Loopback Control sub menu.
TDM Loopback Control (E1 LB1) Window is displayed
Click on Off of the Main Board selected CH# field to open the TDM Loopback Control (E1 LB1)
Select E1 LB1 CH# ON radio button to select loopback On .
Click OK button to apply the maintenance control. Off indication will turn to On with Yellow background
This is the Near End
Baseband Loopback
MAINT Control- TDM Loopback2
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 100/179
100
Click on Maintenance button on the top of LCT window to enter maintenance mode.
Expand the Maintenance Control from LCT menu 。
Expand the Loopback Control from Maintenance Control sub menu.
Select the TDM Loopback Control (E1 LB2) from Loopback Control sub menu.
TDM Loopback Control (E1 LB2) Window is displayed
Click on Off of the Main Board selected CH# field to open the TDM Loopback Control (E1 LB2)
Select E1 LB2 CH# ON radio button to select loopback On .
Click OK button to apply the maintenance control. Off indication will turn to On with Yellow background
This is the Far End
Baseband Loopback
MAINT Control- STM-1 Loopback1
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 101/179
101
Click on Maintenance button on the top of LCT window to enter maintenance mode.
Expand the Maintenance Control from LCT menu 。
Expand the Loopback Control from Maintenance Control sub menu.
Select the TDM Loopback Control (STM-1 LB1) from Loopback Control sub menu.
TDM Loopback Control (STM-1 LB1) Window is displayed
Click on Off of the STM-1S field to open the TDM Loopback Control (STM-1 LB1)
Select ON radio button to select loopback On .
Click OK button to apply the maintenance control. Off indication will turn to On with Yellow background
This is the Near End
Baseband Loopback
MAINT Control- STM-1 Loopback2
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 102/179
102
Click on Maintenance button on the top of LCT window to enter maintenance mode.
Expand the Maintenance Control from LCT menu 。
Expand the Loopback Control from Maintenance Control sub menu.
Select the TDM Loopback Control (STM-1 LB2) from Loopback Control sub menu.
TDM Loopback Control (STM-1 LB2) Window is displayed
Click on Off of the STM-1S field to open the TDM Loopback Control (STM-1 LB2)
Select ON radio button to select loopback On .
Click OK button to apply the maintenance control. Off indication will turn to On with Yellow background
This is the Far End
Baseband Loopback
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 103/179
103
MODEM MAINT CONTROL
MAINT Control- Modem Maint CTRL
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 104/179
104
•ATPC Manual Control
If TX Power Control Mode selected is ATPC Mode, it is possible
to temporarily disable ATPC mode under maintenance control
and transmit .a fixed transmit power.
Select ATPC Manual Control On radio button and enter required
fixed (Manual) power output level within the limits shown.
Click OK button to apply the manual TX control.
This may be required during antenna alignment.
MAINT Control- Modem Maint CTRL
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 105/179
105
This maintenance Control switch off the
TX output power of the ODU connected to
the selected modem
This maintenance Control TX an un-
modulated carrier from the selected
modem
This maintenance Control select a fixed
modulation when the modem is under AMR
mode . Select auto to go back to AMR mode
starting with QPSK modulation and adjustaccording to the propagation condition
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 106/179
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 107/179
107
H/W _ F/W RESET CONTROL
MAINT Control- H/W Reset Control
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 108/179
108
Reset control available only
when Maintenance Mode is On
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 109/179
OFFLINE MAINT CONTROL-
Parameter
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 110/179
110
DADE Operational system (RXSW selection) is fixed to run
DADE.
The operational system does not change to avoid any
circuit interruption.
Offset
DADE
After DADE adjustment, it offsets in a DADE memory
so the amount of delay may serve as the minimum.
Due to the memory offset, it may cause a circuit
interruption.
DADE Off DADE does not adjust, but in order to make the
amount of delay into the minimum, it is set as the very
end of the memory.
NEO ODU CAN CHANGE THE FREQUENCY SUB BAND
BY CHANGING THE TX/RX RF BPF. AFTER CHANGING
THE SUBBAND FILTER NEW SUB BAND LETTER USED
SHOULD BE SET IN THE ODU USING THIS OFFLINE
CONTROL. IF YOU CHANGE THIS PARAMETER
WITHOUT CHANGING THE SUB BAND FILTER RADIO
LINK MAY FAIL.
SELECT FROM THE DROP DOWN LIST THE SUB
BAND LETTER TO BE USED AND CLICK THE SET
BUTTON
IN (1+1) CONFIGURATION, CH1 AND CH2 RX PATH DELAY AT
THE INPUT OF THE SWITCH MAY NOT BE EQUAL.
AUTOMATIC DADE ADJUSTMENT INSERT ADDITIONAL DELAY
IN ONE CH TO MAKE THEM IN PHASE FOR THE HITLESS
SWITCH TO OPERATE PROPERLY.
SELECT DADE AND CLICK SET TO MEMORIZE THE DELAY
SETTING ADJUSTED UNDER AUTO DADE. THIS DELAY IS
ADJUSTED ONLY IN THE STANDBY PATH.
SELECT OFFSET DADE AND CLICK SET TO REDUCE THE
ABSOLUTE DELAY BETWEEN THE TWO RX CHANNELS. THIS
ADJUSTMENT MAY INTERRUPT THE RADIO LINK.
SELECT DADE OFF AND CLICK SET WHEN DADE ADJUSTMENT
IS NOT REQUIRED.
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 111/179
111
METERING
Metering -
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 112/179
112
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 113/179
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 114/179
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 115/179
S/W License Information
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 116/179
116
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 117/179
S/W LICENSE SETUP– IMPORT LICENSE KEY
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 118/179
118
S/W LICENSE SETUP-RADIO CAPACITY SETTING
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 119/179
119
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 120/179
120
Equipment Utility
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 121/179
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 122/179
Equipment utility Program ROM Switching
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 123/179
123
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 124/179
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 125/179
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 126/179
126
User Account / Security Setting
LOGIN USER LIST
LOGIN USER LIST menu shows a list of Users logged in
t th NE l ll d t l
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 127/179
127
Click on the User name to modify the
logged in user's password or user group.
to the NE, locally and remotely.
Click on the Set Password In User
Setting window to change the User
Password
To change the User Group click on the
Group field and select from the drop
down list the group to be changed to.
Click on the Group name of the logged in
User to change the group setting
Click on the Access Level field and from
the drop down list select the new access
level for the Group
USER ACCOUNT MANAGEMENT
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 128/179
128
User Account Management function
allows adding , Modifying and deleting
of User accounts.This function is available for Admin
Access leve l users only
Up to nine user accounts can be added
in addition to the three default user
accounts ( User, Config & Admin ).
Click on the ADD USER icon on the Use Account /
Security Setting window. Enter the User Name and selectthe Group from the drop down list of registered user groups.
Click on the Set Password icon on the User Setting
window to open the Set Password window. Enter the
password for the new user and re-enter it to confirm the
password and click OK
Click on the OK button to register the new user.
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 129/179
USER ACCOUNT MANAGEMENT
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 130/179
130
MODIFY USER
SET PASSWORD
DELETE USER
USER GROUP PROFILE CONFIGURATION
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 131/179
131
PARAMETER DESCRIPTION
Group Name 1 to 32 characters
FTP Allow or Deny using FTPprotocol
HTTP Allow or deny using HTTPprotocol for WebLCT to accessEquipment
SNMP Allow or deny using SNMPprotocol to access networkequipment
Access Level Specify the User Access Level
In addition to the three
default groups
(OPERATOR/CONFIG/
ADMIN) Six additional
groups can be registered.
SECURITY MANAGEMENT
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 132/179
132
Protocol or Service Enabled
Protocol or Service Disabled
SNMP and SNMP Community SETTING
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 133/179
133
Default UDP Port is 161
Item Parameter Description
Community Name Use ASCII within 255Characters
Set the SNMP community name. Any request with differentcommunity name will be refused
Access Level CONFIG- allows only GETADMIN – Allows GET and SET
Assign the access level to the specified server(s)
Access address xxx.xxx.xxx.xxx Specify the valid IP address or network of the SNMP Manager(s)
Subnet Mask 255.xxx.xxx.xxx Subnet Mask of SNMP Manager(s)
SNMP Trap Entry SETTING
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 134/179
134
Item Parameter Description
SNMP Version V1 / v2c / v3 Set SNMP version for trap
PDU Type Trap / Inform Set PDU Type for Trap
IP Address 0.0.0.0 Specify the destination IPaddress of trap
Port 162 (default) (1 t065535)
Set UDP Port trap
Communityname
255 Character Set communication nameof the trap. This muchmatch on both SNMP serverand agent
Security Level NoAuthNoPriv/AuthNoPriv/AuthPriv
Auth Algorithm MD5 or SHA
Auth Key 8 to 16
Priv Algorithm DSE or AES
Priv Key 8 to 16
USER ACCOUNT / SECURITY SETTING
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 135/179
135
FTP and HTTP setting
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 136/179
136
Item Parameter Description
FTP Enable (Running)Disable (Stopped)
Start and Stop FTP service
TCP Port(Command)
21(default Set TCP port of FTP server (for receivedcommand) ) (1 to 65535)
TCP Port (Data) 20 (Default) Set the TCP port of FTP server (for data
transmit) (1 to 65535)
Max session 3 Maximum user connection
Auto Stop Enable Enable FTP server break the connection in90 sec automatically after no operationon the client
Disable Disable FTP server break automatically
Item Parameter Description
HTTP Enable (Running)Disable (Stopped)
Start and Stop HTTP service
TCP Port 80(default) Set the port number of HTTP server
(1 to 65535)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 137/179
137
Current/History PMON/RMON Report
MODEM PMON REPORT
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 138/179
138
ETH RMON REPORT
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 139/179
139
STM-1/ E1 PMON REPORT
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 140/179
140
VLAN COUNTER REPORT
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 141/179
141
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 142/179
142
ETHER FUNCTION SETTING
ETH Function Setting-Bridge Setting (1 of 2)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 143/179
143
Expand Provisioning from LCT menu.
Expand ETH Function Setting from Provisioning sub menu.
Select Bridge Setting from ETH Function Setting sub menu
Current Bridge setting is displayed.
Click Edit button open the Bridge Setting window
Setting window when Aging radio button is ON
Setting window when Aging radio button is OFF
Select the bridge parameters and click the OK button
ETH Function Setting-Bridge Setting (2 of 2)Aging – enabling aging allows the FBD (Forwarding Data Base) to delete the
learnt MAC address if is not communicating for a certain amount of time (FDB
Aging Time)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 144/179
144
GbE MAX Frame Size – it is the maximum size (in bytes) of the Ethernet
frames allowed on Gigabit Ethernet (1 Gbps) ports
Default Value = 1522 bytes Range = 64 to 9600 byes
FE MAX Frame Size – it is the maximum size (in bytes) of the Ethernet frames
allowed on Fast Ethernet (100 Mbps) ports
Default Value = 1522 bytes Range = 64 to 2000 byes
On – Aging function is enabled (default setting)
Off – Aging function is disabled (MAC address entries will not be deleted from
FDB)
FDB Aging Time – it is time (in second) for which the FDB will wait before
deleting the MAC entry if it is not communicating
Default Value = 300 s Range = 5 to 163680 s
VLAN Mode – this option choose the tagging mode in case of VLAN being used
802.1q – VLAN tagging will be done using IEEE 802.1q standard (default setting)
802.1ad – VLAN tagging will be done using IEEE 802.1ad (QinQ, provider bridge)
Default VLAN ID – it is VLAN ID which will be used as default (native) VLAN
Default Value = 1
Range = 1 to 4094 (any VLAN can be set as default VLAN)
Default VLAN TPID – Tag Protocol Identifier
Default Value = 0x8100 for 802.1Q-tagged frameDefault VLAN
•For management IP
•To handle untagged frames
•Trunking purpose
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 145/179
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 146/179
ETH Function Setting– VLAN Setting (1 of 4)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 147/179
147
Expand Provisioning from LCT menu.
Expand ETH Function Setting from Provisioning sub menu.
Select VLAN Setting from ETH Function Setting sub menu
Current VLAN settings are displayed.
Click on VLAN Setting tab to see the current VLAN setting
Click on VLAN List tab to see the current VLAN List
ETH Function Setting– VLAN Setting (2 of 4)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 148/179
148
Click Add VLAN ID to open the Add
VLAN ID window
Item Parameter Description
VLAN ID 1 to 4094 Specify VLAN
ID
VALN
Service
Name
1 to 32 Character Specify the
service name
of the VLAN
Enter the VLAN ID
Enter a VLAN Service Name for the
VLAN ID
Click OK button to close the window
Click Delete VLAN ID to open the Delete
VLAN ID window
Enter the VLAN ID or its VLAN Service
Name to be deleted from the VLAN List
Click OK button to close the delete VLAN
ID window
Confirm the VLAN ID is deleted from thelist
Click the VLAN Service Name to be
modified from the VLAN ListModify the VLAN Service Name
Click OK button to close the Modify VLAN
Service Name window
Confirm the VLAN Service Name is change
din the VLAN List
ETH Function Setting– VLAN Setting (3 of 4)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 149/179
149
Port Type – Access / Truck / Tunnel
Item Parameter Description
Port Type Access Only Allow untagged frame pass through
Tunnel Allow tagged and untagged frame pass through
Trunk Only allow tagged frame pass through
Enable check box Check Check the box to assign the port to the specified
VLAN.Uncheck
Untag Frame Assignment (Access Port) Check
Uncheck
Click the Port to which the VLAN ID is to
be assigned.
Port /VLAN Configuration is displayed
Select the Port Type under VLAN Assignment
Modem Port is always Trunk Port type
Select the VLAN ID (s) for the Selected Port
and Port Type by selecting the enable check
boxes
Main Board Ports can be Access, Tunnel andTrunk Port types
ETH Function Setting– VLAN Setting (4 of 4)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 150/179
150
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 151/179
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 152/179
Example of Trunk Port (tag/untag Frames)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 153/179
153
Untagged frames on
Port 1 are assumed to
belong to VLAN ID = 20Tagged frames on
Port 1 must have
VLAN ID = 10 & 30
P2 (FE)
Fm
A
to
BMSG
Fm
A
to
CMSGVLAN
30
Fm
Ato
CMSGVLAN
30
Fm
Ato
BMSGVLAN
20
Fm
Ato
CMSGVLAN
other
Example of Tunnel Port (Any Frame Forwarding)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 154/179
154
Any frame type on Port 3, eitheruntagged or tagged with any VLAN
ID, will be unconditionally tagged
(Outer Tag) with VLAN ID = 30 and
then processed.
P3 (FE)
Fm
A
to
BMSG
Fm
A
to
CMSG1VLAN
any
Fm
A
to
BMSGVLAN
30
Fm
Ato
CMSG1VLAN
30
VLAN
any
ETH Function Setting– FDB Setting (1 of 5)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 155/179
155
Expand Provisioning from LCT menu.
Expand ETH Function Setting from Provisioning sub menu.
Select FDB Setting from ETH Function Setting sub menu
Select FDB Setting tab to see the current FDB setting.Select Static Entry tab to see the current static entries
ETH Function Setting– FDB Setting (2 of 5)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 156/179
156
Provisioning – ETH Function Setting – FDB Setting – Equipment
Learning MAX Size – Maximum number of MAC addresses the FDB can learn / hold
Default Value = 32512
Range = 1 to 32512
Learning Limit Mode – the action to be taken with frames coming from new MAC addresses exceeding themaximum size of FDB
Default Value = Forwarding – the fame will be forwarded without learning its source MAC address
Other Option = Discard – frames will be dropped if its source MAC address is not there in the FDB
Learning Limit Trap – enable allows the equipment to send traps to SNMP Manager when the learning limitexceeds its maximum size limit (by default it is enabled)
Select FDB Setting Tab.
Click on the Equipment to open the
FDB Setting (Equipment) window
Configure the parameters and click OK
button
ETH Function Setting– FDB Setting (3 of 5)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 157/179
157
Provisioning– ETH Function Setting – FDB Setting – VLAN ID
Learning MAX Size – Maximum number of MAC addresses the FDB can learn / hold for this particular VLAN
Default Value = 0
Range = 0 to 32512Learning Limit Mode – the action to be taken with frames coming from new MAC addresses exceeding themaximum size of FDB
Default Value = Forwarding – the fame will be forwarded without learning its source MAC address
Other Option = Discard – frames will be dropped if its source MAC address is not there in the FDB
Select FDB Setting Tab.
Click on the VLAN ID # to open the
FDB Setting (VLAN ID#) window
Configure the parameters and click OK
button
ETH Function Setting– FDB Setting (4 of 5)
Click the Static Entry
Number to be Modified
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 158/179
158
VLAN ID = 1 to 4094
Item = Main Board / Modem 1 / 2
Port No. = Choose from 1 to 6
MAC address = Type MAC address in hexadecimal
Select Static Entry Tab.
Click on the Add icon to open the Static Entry (Add)
window
Configure the parameters and click OK button
Number to be Modified
Modify the MAC address
for the selected static
entry and Click OK Button
ETH Function Setting– FDB Setting (5 of 5)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 159/179
159
Select Static Entry Tab.
Click on the Delete icon to open the Static Entry
(Delete) window
Select the static entry to be deleted by clicking on the
check box.
Click OK button to delete the entry
Click PMON /RMON/FDB Clear to clear the FDB
Select the appropriate FDB table radio button clear
Click Execute button to clear the selected FDB table
ETH Function Setting– ETH OAM (1 of 4)
Ethernet OAM (Operations, Administration, and Maintenance)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 160/179
160
Expand Provisioning from LCT menu.
Expand ETH Function Setting from Provisioning sub menu.
Select ETH OAM Setting from ETH Function Setting sub menu
Select OAM MEP tab to see the current MEP Index entries
Select OAM MIP tab to see the current MIP entries
Select OAM MEG tab to see the current MEG entries
Maintenance End Point
Maintenance Intermediate Point
Maintenance Entity Group
ETH Function Setting– ETH OAM (2 of 4)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 161/179
161
MEP Index – Index (Serial) No. of the MEP
1 to 192
MEP ID – Unique ID of MEP – 1 to 8191
CCM Transmit / Receive – Enable or
disable CCM (Continuity Check Messages)
transmit and/or receive
CCM Priority - Set priority for CCM – 0 to 7
VLAN Untag – Choose if VLAN tag to be
used with Ethernet OAM messages or not
Item – Choose among Main Board /
Modem1 / 2
Port – Choose the port number
ETH OAM Source MAC Address – Specify
the MAC address to be used as source MAC
address of Ethernet OAM messages
ETH Function Setting– ETH OAM (3 of 4)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 162/179
162
MEG Configuration - Maintenance Entity Group (Add / Delete)
Enable – enables an MEG
MEG Index – Serial Number of MEG (1 to 5)
MEG ID – Unique ID for MEG
MEG Level – hierarchy level of MEG (0 to 7)
ETH-CC Period – Ethernet Continuity Check Message Period in ms or s
Peer MEP Configuration
Enable
Peer MEP ID (1 to 8191)
Peer List Check Status Enabled
ETH Function Setting– ETH OAM (4 of 4)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 163/179
163
MIP (Maintenance Intermediate Point)
Settings – Add / Modify / Delete
MIP Index – 1 to 32
MEG Level – 0 to 7
Item – Main Board / Model 1 / 2Port – Port No.
Enable – Enable or disable
VLAN ID – VLAN ID to be used
Service Name – VLAN Service Name
ETH Function Setting– RSTP Setting (1 of 2)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 164/179
164
Item Parameter Description
STP Mode RSTP Enable RSTP (Rapid Spanning Tree
Protocol)
Disable Disable RSTP
Enable Check Enable RSTP on the port.
Uncheck Disable RSTP on the port.
Item Main Board
MODEM 1
MODEM 2
Select the object from drop-down list
Port - Select the port from drop-down list
Port Name 1 to 32
Character
Specify the port name
Path Cost Auto Enable equipment calculate the path cost
automatically.
Manual Enter the path cost manually.
Path Cost
Value
1 to
200000000
Enter the cost of path when Path Cost is set
to ManualPort Priority 0 to 240 Specify the RSTP priority of the port
Edge Enable Set the Port as Edge port
Disable Remove Edge port feature
P-to-P Force true Enable Point-to-point
Force False Disable Point-to-point。
Auto Set Point-to-point automatically
ETH Function Setting– RSTP Setting (2 of 2)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 165/179
165
Item Parameter Description
STP Bridge Priority 0 to 61440 Set STP priority of the bridge
STP Bridge MAX Age 6 to 40 s Set the expiration of the Configuration BPDU stored,
Bridge will. notice that a topology change has
occurred after the Max Age time elapses and the
BPDU is aged out
STP Bridge Hello Time 1 s Set the period of sending Configuration BPDUsfrom Root Bridge.2 s
STP Bridge Forward
Delay
4 to 30 s Set the delay when the port is going to change the
state from Listening to Learning.
STP TX Hold Count 1 to 10 Set the number of BPDU which can be sent per
second.
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 166/179
166
QUALITY OF SERVICE SETTING
ETH Function Setting– QoS/Classification (1 of 7)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 167/179
167
Classify Field Type
VLAN CoS – 802.1 q / p
IPv4 Precedence
Classify Priority – used to classify
Classify Internal Priority
ETH Function Setting– QoS/Classification (2 of 7)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 168/179
168
ETH Function Setting– QoS/Classification (3 of 7)
Classify Setting tab
iPASOLINK supports QoS based on MEF10 and REC4115 which classify the traffic into eight classes with the proper
Internal Priority according to the predetermined Policer. Except the default Policer, user can configure up to three
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 169/179
169
additional Policer which provide user the capability of realizing the user-orientation QoS strategy flexibly. The
Internal Priority is used for following purpose:
1) Identify Ingress traffic properly according to the predetermined Policer.
2) Mapping the eight classes of ingress traffic to four classes when queuing the Egress traffic
3) Copy the original internal priority to the capsulated frame to prevent the traffic priority from changing unexpectedly. (VLAN c-tag
CoS/VLAN s-tag CoS)
I ngress
At the Ingress of the traffic, assign the internal priority and then perform flow control according to the predetermined policer,
coloring the frame with Yellow or Green which decide the QoS queue at the egress, discarding the frames of the traffic thatexceed the designated bandwidth (EIR, Excess Information Rate).
Egress
Queuing the frame according to the internal priority and the color assigned at ingress, determine forwarding or discarding
the frame.
ETH Function Setting– QoS/Classification (4 of 7)
Item Parameter Description
QoS Port Setting Information
Scheduling Mode 2xSP Specify the queuing mode.
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 170/179
170
SP: Strict-Priority
DWRR: Deficit Weighted Round Robin
4xSP
1xSP+3xDWRR
4xDWRRPort Drop Mode WTD Specify the port discard all packets at the tail end of the queue when
queue exceeded the pre set threshold. WTD (Weighted tail drop).
WRED Specify the port randomly discard the packets of lower priority traffic
before higher priority traffic when queue exceeded the preset
threshold. WRED (weighted random early detection).
Egress Shaper Rate 0 to 1000 Mbps Specify the maximum sending rate of the egress queue.
Internal Priority Queuing Policy per Ingress Port
Internal Priority 0 to 7 Class 0 to 7 Set the priority of Ingress port
Egress Class Setting Information
Class Shaper Rate 0 to 1000 Mbps Specify the maximum sending rate of the class.
Class DWRR Weight 1 to 127 Specify the weight of the queue.
Class Queue Length 16 to 128 Kbyte Specify the length for each Queue.
Queue 6 and 7 is fixed at 16Kbyte.
Wtd Yellow Frame Threshold 10 to 100 % Set the Threshold of Yellow Frame
ETH Function Setting– QoS/Classification (5 of 7)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 171/179
171
ETH Function Setting– QoS/Classification (6 of 7)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 172/179
172
ETH Function Setting– QoS/Classification (7 of 7)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 173/179
173
ETH Function Setting– QoS/Classification (7 of 7)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 174/179
174
ETH Function Setting– QoS/Classification (7 of 7)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 175/179
175
ETH Function Setting– QoS/Classification (7 of 7)
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 176/179
176
Provisioning– LLF Setting
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 177/179
177
Provisioning– Other Ether Setting
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 178/179
178
Slot / Port No. / Port Name– Chose the port to be modified
Media Type – Optical / Electrical
Speed – 10 Mbps / 100 Mbps / Auto-negotiated
QoS Mode – Strict Priority / ??
VLAN ID – VLAN to which this port belongs
Monitoring - Mirroring
7/18/2019 iPASO LCT Training Manual(3NOV)
http://slidepdf.com/reader/full/ipaso-lct-training-manual3nov 179/179
Thank you
This training document describes the current version of the equipment.
The specifications or configuration contained in this document are subject to change