IP Video Intercom€¦ · Video Intercom, User Setup, System Setup. 3) Shortcut key including: Ringtone On/Off, Outdoor Station Monitoring, one key arm. 4) Status Icon from left to

IP�Video�IntercomUniversal�User�Manual

Wifi�Intercom-D

Android iOS

1 2

1 System Wiring Diagram

System list:

Outdoor station, IP camera, Indoor monitor, Router, Switch, Smart phone.

Note: Support PoE Function if use PoE splitter in outdoor station.

System Wiring

(Miltple Devices)

Doorbell

5.Red(DC+12V-18V/1A)

10

Door4

Doorbell

Black(GND)

Red(DC+12V)

System Wiring

(one to one)

Note: Support PoE Function if use PoE splitter in outdoor station.

3 4

2 Indoor Monitor Operation

picture 2.1

2.1 Introduction

1) There are Menu, Shortcut Keys, Status, as picture2.1.

2) Menu including: Recording Center, Security Zone, Monitoring Center,

Video Intercom, User Setup, System Setup.

3) Shortcut key including: Ringtone On/Off, Outdoor Station Monitoring,

one key arm.

4) Status Icon from left to right means:

① Network status: Connected, Disconnected,

Network Conflict.

② Security status: Arm, Disarming, Alarming.

③ Unread message:

④ Missed call:

⑤ WiFi connection:

2.2 Video Intercom

2.2.1 Internal Call

2.2.2 Cloud Intercom

2.2.2.1 WiFi Connection

Connect up to 9 indoor monitor extensions and support “Click to call the monitor

extension” or “the other is not online” if the monitor extension is not setting

successfully or offline. as picture 2.2.1

The smart phone can communicate with visitor when the bell is pressed.

Before that, you need to connect the WIFI Router and select the Cloud

Server in indoor monitor firstly,bind with smart phone by APP.Meanwhile,

when the bell is pressed,there will be a notification in the smart phone.

Note: only available to set the “ Cloud Intercom Function” in “ 01 Monitor

Extension”

Click “ Wifi Connection ” to enter the interface and connect the related Wifi

Name when there is Wifi list.As picture 2.2.2.1

Transform to enter Capital or Lowercase Letter.

Transform to enter Number or Letter.

Delete the input.

Confirm to connect the Wifi.

picture2.2.1

5 6

2.2.2.2 Server Selection

Click “ Sever Selection ” to select the related server which is near you, to

have better Cloud Intercom Experience.As picture 2.2.2.2.

-“Default”: is the server in China.

-“Ap-southeast-1”: is the server in Singapore.

-“Ap-southeast-2”: is the server in Sydney/Australia.

-“Us-east-1”: is the server in Dubai/UAE.

-“Eu-central-1”: is the server in Frankfurt/Germany

picture 2.2.2.2

picture 2.2.2.1

2.2.2.3 Mobile Binding

2.3 User Settings

Click “ Mobile Binding ” to have the records list which smart phone binding

with the Indoor Monitor to have Cloud Intercom Function. Meanwhile,you

can delete a record or all records after selected.As picture 2.2.2.3.

Note: “Cloud Intercom Function” in smart phone is not available if you delete

the binding record in the indoor monitor.

Click to enter “ User Settings Interface” as picture 2.3.

: Click “ One Circle Button” to enter the next user settings page.

picture 2.2.2.3

picture 2.3

7 8

2.4 Software Upgrade

2.5 Record Mode Setting

Caution: Don’t shut off power during the software is upgrading or the indoor

monitor will not work any more.

Click “Upgrade” to enter the Software Upgrade.

1). Support SD Card Software Upgrade that need to put “image.dd” and

“NetCfg.dat” in related SD Card.

2). Assembly SD Card in the indoor monitor and shut off power to reset the

indoor monitor accordingly. Then, enter “ Upgrade” menu as the above

instructions.

3). Select “NetCfg” or “Program” to upgrade the Program and Network

Configuration separately. As picture 2.4.

A. Select “NetCfg” firstly and click “OK” to upgrade the Network Configuration,

it will reboot automatically to be upgradedsuccessfully.

B. Select “Program” firstly and click “OK” to upgrade the Program, it will reboot

automatically to be upgraded successfully.

“Record Mode” is including Record and Snapshot, to set the outdoor station

record mode when the householder missed the call or answered the call.

Record is “take the video of visitor” and Snapshot is “take the photo of visitor”.

As picture 2.5.

picture 2.4

2.6 Outdoor Station Parameters Resetting

Support to review and change the Outdoor Station Parameters.

As picture 2.6.

1). Input “Door Extension Number” and cl ick “OK” to have related door

extension parameters such as “Unlock Time”, “Ring Volume”, “Call Volume” ,

“ Motion Sensitivity”, “Software Version”.

2). Support to change the parameters, need to delete the previous parameters

and input new ones. Then, click “OK” to change successfully.

picture 2.5

picture 2.6

9

Display: 7" TFT LCD(color)

Resolution: 1024*600

Vibration: Bell≥70dB

Power: DC 12V/2A

Current: ＜350mA

Working temperature: -20℃~+70℃

Max power consumption: ＜5W

Mension: 226mm*151mm*23mm

Installation: surface mounted

4 Technical Configuration

3 Installation Diagram