IP Network Intercom Exchange IP NETWORK INTERCOM SYSTEM DESCRIPTION FEATURES ● ● ● ● ● ● ● ● The N-8000 Series comprises a complete network-based intercom system that makes it possible to achieve efficient wide area coverage with high-quality audio through a network, even with the most remote locations. The system includes a main exchange unit that can handle up to 16 dedicated stations. The system provides a full range of communication features and functions such as: Redial, Recall, One-touch dialing/Auto-dialing, Group Call, Group hunting/Absence transfer/Call Forwarding, Call Hold, and Scan Monitor. Stations are also available in various configurations to suit specific applications and depending on model, provide such features such as LCD display, hands- free operation, and heavy-duty design for severe environments. Convenient station paging is possible as each station has a built- in speaker and by using an external amplifier, PA paging is also possible. The system can broadcast to a total of 160 zones with paging as well as provide all-zone paging. The system can also be expanded as desired to a maximum of as many as 1,280 stations. In addition, since the system is network-based, maintenance is simplified with a personal computer able to perform all maintenance tasks. The increasing prominence of networks makes it possible for TOA to develop advanced and cost-effective communication products. A network-based intercom system consisting of an exchanger unit and dedicated station. A single exchange unit can connect up to 16 stations. Stations are available in four different configurations. These are: N-8000MS (with LCD display), N-8010MS (standard), N-8011MS (hands-free calls), and N-8020MS, which is a heavy-duty type designed for use in adverse environments such as factories and various plants (dust- and water-resistant: IP54). This system is equally suitable for use in a small-scale system with 16 stations to meeting the demands of a large-scale system that can have as many as up to 1,280 stations. Once the intercom is connected to a network, efficient wide area connections even between remote locations can be achieved. The system includes convenient functions and features such as: Redial, Recall, One-touch dialing/Auto-dialing, Group Call, Group hunting/Absence transfer/Call Forwarding, Call Hold, and Scan Monitor. Using the echo canceller function makes hands-free simultaneous conversation an easy task. High quality audio with frequencies extending to 7kHz* for extra clarity is possible. Stations incorporate a built-in speaker, which allows station paging. PA paging can also be conducted using an external PA amplifier. Total broadcast capabilities of up to 160-zones with paging and All-call paging are possible. Total system maintenance can be conveniently performed through network using a personal computer that has TOA,s dedicated software installed. *network status may sometimes cause audio quality to deteriorate to about 3.4 kHz. N-8011MS N-8000MS N-8000EX N-8020MS N-8010MS Master Stations
6
Embed
IP Network Intercom Exchange - Louis Grace · IP Network Intercom Exchange The IP Network Intercom Exchange uses packet audio technology to permit connection of up to sixteen N-8000
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
APPLICATION EXAMPLE
IP Network Intercom Exchange
IP NETWORK INTERCOM SYSTEM
DESCRIPTION FEATURES
The N-8000 Series comprises a complete network-based intercom system that makes it possible to achieve efficient wide area coverage with high-quality audio through a network, even with the most remote locations. The system includes a main exchange unit that can handle up to 16 dedicated stations. The system provides a full range of communication features and functions such as: Redial, Recall, One-touch dialing/Auto-dialing, Group Call, Group hunting/Absence transfer/Call Forwarding, Call Hold, and Scan Monitor. Stations are also available in various configurations to suit specific applications and depending on model, provide such features such as LCD display, hands-free operation, and heavy-duty design for severe environments. Convenient station paging is possible as each station has a built-in speaker and by using an external amplifier, PA paging is also possible. The system can broadcast to a total of 160 zones with paging as well as provide all-zone paging. The system can also be expanded as desired to a maximum of as many as 1,280 stations. In addition, since the system is network-based, maintenance is simplified with a personal computer able to perform all maintenance tasks. The increasing prominence of networks makes it possible for TOA to develop advanced and cost-effective communication products.
A network-based intercom system consisting of an exchanger unit and dedicated station.
A single exchange unit can connect up to 16 stations. Stations are available in four different configurations. These are: N-8000MS (with LCD display), N-8010MS (standard), N-8011MS (hands-free calls), and N-8020MS, which is a heavy-duty type designed for use in adverse environments such as factories and various plants (dust- and water-resistant: IP54).
This system is equally suitable for use in a small-scale system with 16 stations to meeting the demands of a large-scale system that can have as many as up to 1,280 stations. Once the intercom is connected to a network, efficient wide area connections even between remote locations can be achieved.
The system includes convenient functions and features such as: Redial, Recall, One-touch dialing/Auto-dialing, Group Call, Group hunting/Absence transfer/Call Forwarding, Call Hold, and Scan Monitor.
Using the echo canceller function makes hands-free simultaneous conversation an easy task.
High quality audio with frequencies extending to 7kHz* for extra clarity is possible.
Stations incorporate a built-in speaker, which allows station paging. PA paging can also be conducted using an external PA amplifier. Total broadcast capabilities of up to 160-zones with paging and All-call paging are possible.
Total system maintenance can be conveniently performed through network using a personal computer that has TOA,s dedicated software installed.*network status may sometimes cause audio quality to deteriorate to about 3.4 kHz.
N-8011MSN-8000MS
N-8000EX
N-8020MSN-8010MS
Master Stations
N-8000EX IP Network Intercom Exchange
The IP Network Intercom Exchange uses packet audio technology to permit connection of up to sixteen N-8000 Series stations, and features two outputs for public address paging. Simultaneous hand-free conversation is possible between stations. Moreover, the exchange is equipped with a networking interface, allowing up to 80 exchanges to be connected over a network using additional network intercom exchanges. The Exchange can be mounted in an EIA standard rack (1-unit size) or to a wall using the supplied bracket.
Rear View
Side View
Front View
Wall mounting installation
Wall mounting bracket (accessory)
31.8
44.3
56
483466420
349
22.5 21 194
194
38
2–ø4
Dimensions ofwall mounting hole
20236196
20
1
10
460440
(196
)32
.6
18
4 10
33,610–ø2.4
22
18.920.6
N-8000MS Multifunctional Master Station
This Master Station is designed to connect to the Network intercom Exchange, and provides hands-free or handset conversation of high sound quality. In addition to the functions of the standard Master Station, the Multifunctional Master Station provides LCD display. Auto-dialer function enabling one-touch dialing, headset terminal and external speaker terminal. This station can be mounted to the wall using and optional YC-280 wall mounting bracket.
Rear ViewSide ViewFront View
Top ViewFigure of the
desktop installation
207.3
48.3 69
.7
148 70.5
208
unit: mm
N-8010MS Standard Master Station
This Master Station is designed to connect to the Network intercom Exchange, and provides hands-free or handset conversation of high sound quality. This station can be mounted to the wall using and optional YC-280 wall mounting bracket.
Rear ViewSide ViewFront View
Top ViewFigure of the
desktop installation
207.3
48.3 69
.7
148 70.5
208
unit: mm
N-8011MS Standard Hands-Free Master Station
This Master Station is designed to connect to the Network intercom Exchange, and provides hands-free or handset conversation of high sound quality. With its space-saving design, this Master Station features the same functions as the Standard Master Station. This station can be mounted to the wall using and optional YC-290 wall mounting bracket.
Rear ViewSide ViewFront View
Top View Figure of thedesktop installation
194.4
38.3
57.9
92 56.1
195
unit: mm
N-8020MS Industrial-Use Master Station
This Master Station is designed to connect to the Network intercom Exchange, and provides hands-free or handset conversation of high sound quality. It features dustproof and waterproof construction, and can be used in locations exposed to ambient temperatures ranging from –10°C to +50°C. In addition to the functions of the standard Master Station, the Industrial-Use Station permits connection of external spealers and can take out control signal for dial-in inddicator from its contact output. This station can be mounted to the wall using and optional YC-280 wall mounting bracket.
The E-7000TB is Terminal Board for IP Network Intercom. It is used for a hookup between the exchange and the station, and allows connection of up to 40 lines.
Rear ViewSide ViewFront View
Top View
Figure of thedesktop installation
238
91
170 97.8
220
unit: mmunit: mm
Wall Mounting Brackets/Terminal Board
E-7000TBTerminal Board
YC-280Wall Mounting Bracketfor N-8000MS, N-8010MS and N-8020.
YC-290Wall Mounting Bracketfor N-8011MS.
4–6x10
420465482
108.8
57.2
132.
6
Under View
Top View
Front ViewSide View
(Without front panel)
1008060
4.6x6
13 2 (desktop view)
Rubber foot(accessory)
31.8
10°
2–ø4.5
6037
50 83.5 14
0
Top View
Front View
Side View
4.5x10
23.5
6450 4.6x6 13 2 (desktop view)
Rubber foot(accessory)
31.8
10°
2–ø4.5
6037
50 83.5
131.
5
Top View
Front View Side View
4.5x10
23.5
34
SYSTEM CONFIGURATION EXAMPLEThis system consists of the following equipment.
ExchangeN-8000EX: IP Intercom Exchange
StationsN-8000MS: Multifunctional Master StationN-8010MS: Standard Master StationN-8011MS: Standard Hands-Free Master StationN-8020MS: Industrial-Use Master Station
OthersYC-280: Wall mounting bracket for the N-8000MS/-8010MS/-8020MSYC-290: Wall mounting bracket for the N-8011MSE-7000TB: 40-Station Terminal BoardCR-273: Equipment RackCR-413: Equipment Rack
N-8000EXAmplifier
Speaker
To AC MainsUPS
(Uninterruptible power supply feeder)
To LAN
N-8000MS N-8010MS N-8020MSN-8011MS
SYSTEM FUNCTION TABLE
Item Setting from: Software Browser StationStation number digit — —System name —Password —Paging number digit — —Paging zone name — —Assigned station — —Assigned PA zone — —Network communicationsON or OFF between exchanges — —
Web server port number —TCP start port number — —UDP start port number — —Multicast address — —Multicast port number — —WAN IP address — —WAN Web server port number — —WAN TCP start port number — —WAN UDP start port number — —Network ID — —Broadcast specification — —Communication capacity — —Sampling frequency
— —compensationTransmitted party IP address — —Recipient party IP address — —Reception multicast address — —Equipment name —Call forwarding function — —Time-based call forwarding
— —functionTime-based call forwarding
— —start timeTime-based call forwarding
— —end timeGroup hunting function — —Absence transfer function — —Absence transfer call duration — —Call timeout — —Conversation time out — —Paging time out — —Paging response mode — —Paging priority mode — —
Item Setting from: Software Browser StationStation number — *2
Name — —Paging operation enable or
— — disableReception mode — —Automatic connection
— —call toneContinuous call tone — —Group call member — —Access to priority call — —Refusal of priority call setting — —Call forwarding destination
Station speaker sound volume — —One touch dialing — *2
Auto-dialing — — *2
Scan monitor group — —Scan monitor duration — —Remote response group — —Remote response destination
— —number
SYSTEM SETTING ITEMSSettings can be performed for the connected exchanges from a PC and the stations.
General System Exchange Stations
*1 Settings can only be performed from the N-8000MS Multifunctional Master station.
*2 Setting can be performed from all stations.*3 Be sure to set this since settings and conversations are
performed via a network.
Function Description
[Conversation]
Hands-free Permits conversations to be made without lifting the handset conversation when another party is called or when a call is received in
automatic connection mode.Handset Calls can be made or received by lifting the handset.conversationPTT conversation Pressing the PTT key during a conversation enables one-way
conversation from the party who pressed the PTT key. Conversation flow is reversed when the key is released.
[Call]
Individual call The desired party can be called by dialing its station number.Redialing Pressing the Redial key automatically redials the last number
called. Only the N-8000MS Multifunctional Master Station permits selection from the most recent 10 numbers.
Recall The last conversation partner can be recalled by pressing the [#/] key regardless of whether the call was made or received. Only the N-8000MS Multifunctional Master Station permits selection from the most recent 10 numbers.
Voice calling Holding down the PTT key while making a call by means of a continuous call tone permits a voice calling to be made to the called station. The voice calling reverts to the original continuous tone call when the PTT key is released.
Group call When a station is assigned to a call group, if the station is called, all stations within that group are simultaneously called by a continuous call tone regardless of their call connection mode settings. If any one of the stations within the group responds, calls to the other stations stop.
[IncomingAutomatic Incoming calls are automatically connected after a brief call
Callconnection tone (1 second) or without a call tone.
Selection]Continuous call Calls continue with a continuous call tone (or without a
call tone) and a status indicator continuously flashesas long as no response is made.
[Speed
Auto-dialing The most frequently used station numbers (of up to 20 digits)
Dialing]
(N-8000MS only) programmed into the station's auto dialer can be called by one-touch dialing.
One-touch dialing Pre-programming a number (up to 20 digits) into the station's [7], [8], [9], [0] keys or off hook permits that number to be automatically called by one-touch dialing the corresponding key.
[Hold]
Mic Off When it is desirable to hold the line during a conversation, if any dialing key ([0] - [9]) is pressed, the microphone is disabled as long as the key is pressed.
Call hold Pressing the Hold key during a conversation places theconversation on hold, transmitting a hold tone to both parties. If the Hold key is pressed again, the hold mode is cancelled, and the original conversation is restored.
Function Description
[Call transfer]Current conversations can be placed on hold to call a third party by pressing the Transfer key. The original conversation can be subsequently restored or transferred to the third party after conclusion of the second call.
[Automatic
Group hunting Calls to a busy station are automatically transferred to another
Transfer]
designated station, if group hunting function is set to the called station.
Absence transfer When no response is made to a call for a set period of time, the call is automatically transferred to another designated station.
Call forwarding Calls to stations are automatically transferred to another designated station without sounding a call tone. Two different modes are available: one is call forwarding, in which calls are manually rerouted to the selected station, and the other is time-based call forwarding, which transfers calls only when the preset time is reached.
[Remote Response]Calls to a station can be answered by pressing the PTT key of another station, provided both stations are assigned to the same group.
[Executive Priority]
If a called station is busy, as indicated by a busy tone, pressing the [9] key transmits a short priority call tone, then forcibly terminates the current conversation, allowing the call to go through. Access to priority call operation or refusal of prioritycalls can be set individually for each station.
[Scan Monitor] The station can scan an arbitrary group of preprogrammedstations for auditory monitoring.
[Paging]
Zone paging Calls can be made to one of the pre-programmed zones.Paging Calls can be made to up to 10 zones of the preprogrammed
multiple zones.All-call paging Calls can be made simultaneously to all of the preprogrammed
zones.[Station Speaker Output Setting] Permits adjustment of the station speaker sound volume.
[Ambient Noise Control] Automatically measures the ambient noise level of the station and sets the station for proper hands-free conversation.
[PagingAutomatic response Dialing the Paging Response key automatically initiates a
Response]response to the paging last received.
Zone number response Dialing the number assigned to paging response automatically initiates a response to a next-to-last paging.
Time-outThe duration of calls, conversations and paging can be limited by pre-programming time intervals (10 - 990 seconds) for individual exchanges.
Group blocking Arbitrary station groups (up to 31 groups) can be set to permit or
disallow calls between groups.
PC Window Example
Specifications are subject to change without notice.Printed in Japan (0502) 833-00-000-00 U
TOA Corporationhttp://www.toa.jp/
Model No.Power SourcePower ConsumptionType of Speech PathSpeech LinkHands-free Speech Method Line CapacityWiring MethodTransmission SystemSignal LevelTransmission RangePower Supply to StationPaging Output
Connecting TerminalOthers
Network SectionNetwork I/FNetwork ProtocolAudio Packet Transmission System Connector Voice Sampling FrequencyQuantifying Bit NumberVoice Encoding MethodAudio Packet Omission Compensation SystemAudio Delay Time
N-8000EXN-8000EX (CE): 230V AC, 50/60Hz/N-8000EX (CU): 120V AC, 50/60Hz50W (at rated), 75W (max.)Space sharing/Time Space sharingInternal: 4/External: 8 (Both Half duplex/Full duplex use)Simultaneous conversation by way of echo canceller or Half-duplex conversation by way of voice switchUp to 16 stationsNon-polar one pair stranded wire system2 wire 160kbps echo canceller transmission systemUnder 0dB*Max. 1500m (ø0.65mm. Loop resistance 170 ohms)48V DC, Max. 70mAAudio: 2 channels Max. 0dB*, 600Ω, balanced, detachable terminal blockControl: 2 channels, no-voltage make contact output (24V DC/0.5A), detachable terminal blockRJ-11 modullar jackFirmware update function, System registration data entry hold facility, Time of day hold facility, Forced air-cooling, Reset switch (front panel) 10BASE-T/100BASE-TX (Automatic change)TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMPUnicast (Simultaneous paging to up to 16 zones)Multicast (Simultaneous paging to up to 79 zones)RJ45 connector16kHz, 8kHz (Controllable on the software)16-bitSub-band ADPCM, CryptosystemSilence insertion
80ms, 320ms (Controllable on the software)Network LINK/ACT indication, Status Lamp, Power-on indication lampRack, Desk, Surface mount0°C to +40°CUnder 90% RH (no condensation)Pre-coated steel plate, black, 30% gloss420 (W) × 44.3 (H) × 349 (D)mm4.2kgAC power cord (2m) × 1, CD (for PC setting, maintenance use) × 1, Detachable terminal plug (4P) × 2, Detachable terminal plug (2P) × 20, Plastic foot × 4, Screw for fitting plastic foot × 4, Rack mounting bracket × 2, Screw for rack mounting × 4, Wall mounting bracket × 2, Screw for mounting bracket × 8, Screw for wall mounting × 4
Model No.Power SourcePower ConsumptionWiring MethodTransmission System Signal Level Speech MethodAudio Frequency RangeTransmission RangeHands-freeHandset