1 Investments in Forest Industry Transformation FULL PROJECT PROPOSAL Stream 1 – Capital Investment Projects 5th Call for Proposals APPLICATION FORM OVERVIEW Applicants are encouraged to review the Investments in Forest Industry Transformation (IFIT) Applicant Handbook Stream 1: Capital Investment Projects prior to completing the Full Project Proposal form. The Handbook was developed to assist applicants in preparing their submissions to the IFIT Program. It provides guidance on the type of information to be included in the application and describes the additional documents that are required as part of the submission. It also explains how the IFIT Program will review proposals in a consistent, fair, and transparent manner and how the program will communicate with applicants at different stages of the process. This form is broken down into six (6) major parts followed by annexes, attestations, and a submission checklist: Part 1: Executive Summary Part 2: Applicant Information Part 3: Project Information Part 4: Mandatory Criteria Part 5: Rated Criteria Part 6: Expected Benefits and Performance Management Annexes A – Statement of Work B – Risks and Mitigation Measures C – Financial Analysis Templates Attestations
24
Embed
Investments in Forest Industry Transformation FULL PROJECT ... · 5th Call for Proposals APPLICATION FORM OVERVIEW Applicants are encouraged to review the Investments in Forest Industry
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1
Investments in Forest Industry Transformation
FULL PROJECT PROPOSAL
Stream 1 – Capital Investment Projects
5th Call for Proposals
APPLICATION FORM OVERVIEW
Applicants are encouraged to review the Investments in Forest Industry Transformation (IFIT) Applicant Handbook Stream 1: Capital Investment Projects prior to completing the Full Project Proposal form. The Handbook was developed to assist applicants in preparing their submissions to the IFIT Program. It provides guidance on the type of information to be included in the application and describes the additional documents that are required as part of the submission. It also explains how the IFIT Program will review proposals in a consistent, fair, and transparent manner and how the program will communicate with applicants at different stages of the process. This form is broken down into six (6) major parts followed by annexes, attestations, and a submission checklist: Part 1: Executive Summary Part 2: Applicant Information Part 3: Project Information Part 4: Mandatory Criteria Part 5: Rated Criteria Part 6: Expected Benefits and Performance Management Annexes
A – Statement of Work B – Risks and Mitigation Measures C – Financial Analysis Templates
Attestations
2
Application Package Checklist
The IFIT Program will be accepting proposals through its Funding Portal INTEGRO. Applicants will be required to input their answers to Parts 1 through 6 as noted above directly in the online portal. This application form is provided to enable applicants to get an overview of the requirements, work collaboratively to complete the information, or seek approvals prior to applying. As a best practice, applicants are encouraged to use this form to draft their responses, however applicants will be required to transfer the information directly to the online portal. The Annexes and Attestations must be completed in a spreadsheet and word processing program respectively and uploaded through INTEGRO. The Application Package Checklist is a tool for applicants and does not need to be submitted to NRCan.
3
NOTES TO APPLICANTS
1. To select a checkbox - right click in the box, select “properties”, select “checked”. 2. It is the responsibility of the applicant to ensure the word character limits are respected for each question. The box sizes in this form do not necessarily reflect the character limit - you may wish use the “Word Count” tool in your word processor (e.g. in Microsoft Word: Review Tab / Proofing Section / Word Count Tool). 3. Unless otherwise specified, the “Proposed Project”, the “Project”, or the “Proposal” in this application form refers to the proposed project submitted to the Investments in Forest Industry Transformation (IFIT) program. 4. Completion and submission of this application to IFIT does not imply that the proposed project will be approved by IFIT. 5. Applicants must submit all information specified in this Application Form. Failure to provide the necessary information may lead to rejection of the Proposal. It is the responsibility of the applicant to ensure that the Proposal clearly and thoroughly demonstrates how each criteria is met. The attached technical information is required to support the information in this application form. 6. The applicant should provide information concisely while still providing sufficient details to ensure complete understanding by reviewers. 7. This form is confidential when completed, with the exception of marked fields. 8. When you have completed the Application Form, please submit all required information via the Natural Resources Canada Funding Portal - INTEGRO.
4
PART 1: EXECUTIVE SUMMARY Please note that information entered in this section may be shared publicly.
Legal name of applicant company:
If operating name is different, please provide it or enter NA:
Project Title:
Project location Facility:
City:
Province:
Latitude/longitude coordinates:
Briefly describe the proposed project and how it constitutes an advancement of a forest sector
technology, process, or product in Canada (2,000 characters maximum):
5
PART 2: APPLICANT INFORMATION Head office address:
Street Address:
City/Town:
Province:
Postal Code:
Company GST number:
Annual sales in Canadian dollars:
Company Website:
Number of full-time employees:
Number of part-time employees:
Number of years company your has been in operation:
Has your company (or your partner organization(s)) received funding from Natural Resources Canada in
the last 5 years?
__ Yes __ No
If yes, please specify the name of the program:
Does your company have a Workforce Diversity and Inclusion Plan in place?
__ Yes __ No
If you answered yes, you are encouraged to include the plan as an attachment.
Please note that a Workforce Diversity and Inclusion Plan is a Program requirement for all funded
projects. If your project is selected for funding, the Plan will be required prior to receiving funding. A
template is available on the IFIT website, however, applicants may use the format of their choice.
Primary Project Contact
Name:
Title:
Company:
Telephone:
Email:
Project responsibilities:
Preferred language: __ English __ French
Secondary Project Contact
Name:
Title:
Company:
6
Telephone:
Email:
Project responsibilities:
Preferred language: Preferred language: __ English __ French
7
PART 3: PROJECT INFORMATION
Application Stream:
__ Stream 1.a: General Enterprise
Open to companies of any size, including small enterprises requesting more than $1 million for a total
project of any cost. Maximum funding amount per project is: $20 million
__ Stream 1.b: Small Enterprise
To be eligible under this stream, applicants must meet all of the following conditions:
Company employs 50 or fewer people
Funding amount requesting from IFIT is $1 million or less
Total project cost including IFIT requested funding is $3 million or less
If the above conditions are not met, please select stream 1.b.
Provide a short description of the facility at which the project will take place (350 characters maximum):
Project Funding: Estimated total project cost:
IFIT funding request (maximum 50% of total project cost):
How have capital and project cost estimates been established? Please note that it is mandatory that the
estimate is within a +/-20% degree of accuracy.
Estimated total project cost by government fiscal year and funding source:
Please note that the government fiscal years run from April 1 – March 31 (e.g. April 1, 2020 – March 31,
2021)
Funding Source IFIT Program
April 2020-March 2021:
April 2021-March 2022:
8
April 2022-March 2023:
April 2023-March 2025: N/A IFIT eligible cost period ended March 31, 2023.
Total Amount:
Applicant
April 2020-March 2021:
April 2021-March 2022:
April 2022-March 2023:
April 2023-March 2025:
Total Amount:
Other
April 2020-March 2021:
April 2021-March 2022:
April 2022-March 2023:
April 2023-March 2025:
Total Amount:
Total Project
April 2020-March 2021:
April 2021-March 2022:
April 2022-March 2023:
April 2023-March 2025:
Total Amount:
Other Sources of Funding1: Please note that confirmed funding means that an agreement has been signed.
Name of Organization:
Requested Funding Amount:
Confirmed: __ Yes __ No
Name of Organization:
Requested Funding Amount:
Confirmed: __ Yes __ No
Name of Organization:
Requested Funding Amount:
Confirmed: __ Yes __ No
1 Add or remove sections as necessary
9
Name of Organization:
Requested Funding Amount:
Confirmed: __ Yes __ No
For any unsecured funding (other than IFIT), when do you expect it to be secured? What is the
contingency plan in the event funding is not secured? (1,400 characters maximum)
10
PART 4: MANDATORY CRITERIA
a) Eligible Recipients
Eligible recipients are for-profit companies located in Canada that either:
produce forest products in an existing forest product manufacturing facility (for example, pulp,
paper, or solid/engineered wood products facility)
OR
are/will be new entrants in the forest sector for the purpose of the proposed project.
Eligible recipients can include includes clusters, joint ventures, and consortiums, provided that a for-
profit company acts as the lead applicant.
Do you meet the above criteria? __ Yes __ No
Describe your company’s principal line of business. (350 characters maximum)
If you are a lead applicant for a cluster, joint venture, consortium or similar organization, please describe
the organization and your role within it. (350 characters maximum)
b) Technology Advancement The proposed project must constitute an advancement in the Canadian forest sector.
All of the following must be true to meet this criteria:
The project will produce or will lead to the production of innovative bioproducts or bioenergy
OR will employ new process to produce forest products.
The proposed project will be carried out at a pilot to commercial scale. (IFIT funding cannot
support projects at a research and development stage.)
The project should be the first installation, at the proposed scale and specification, in the
Canadian forest sector (including components of larger systems and technologies that improve
efficiency of upstream activities or logistics within the forest sector supply chain).
Do you meet the above criteria? __ Yes __ No
11
What is the scale of your project?
__ Pilot or demonstration scale – Technology employed to produce a small quantity of a product for
technical and market analysis (i.e. will produce small volumes in support of future full scale
development).
__ Commercial – Full scale facility that intends to produce products for profit.
__ Unsure
Please describe the production capacity of the proposed technologies. (E.g. the volume of feedstock the
equipment can process, the volume of product that can be produced, etc.)
c) Integration within the Forest Sector Supply Chain
The project must be located at an industrial facility, existing or new, in Canada. It may be:
connected to an existing forest sector industrial process (e.g. innovative process or technology
to improve efficiency within an existing (open or closed) facility).
OR
a stand-alone project within the supply chain (e.g. production of an innovative new product at a
designated facility).
Do you meet the above criteria? __ Yes __ No
Clearly describe how you meet the above criteria. (2,700 characters maximum):
d) Primarily Based on Wood Fibre Project uses material that is derived from wood fibre. This includes, but is not limited to, by-products
generated by industrial wood processing and wood residues.
Do you meet the above criteria? __ Yes __ No
12
PART 5: RATED CRITERIA
a) Technical Feasibility i. Describe the product(s) that will be produced or the technology that will be implemented by this
project. Include a description of the process used to implement the project and, if applicable, an
estimate of the quantity of the new product that is expected to be produced once the project is
implemented. Applicants are encouraged to attach and reference a technical report, which provides
information supporting the successful implementation. (5,500 characters maximum):
ii. Provide any product standards or certifications that need to be met by your product. What product
specifications will be monitored to achieve a quality product? (1,400 characters maximum):
iii. What remaining engineering design and/or technical studies are required to initiate the project?
Have engineering firm(s) been identified or retained to perform these studies? (1,400 characters
maximum):
iv. Has the process/technology been demonstrated or verified by a third party? If so, who? (1,400
characters maximum):
v. What are the key performance indicators (KPIs) for the project? KPIs should be specific, easily
measured, and time bound. They may include production, social, or environmental targets. Please note
that financial indicators will be captured in Annex C of the application. (1,400 characters maximum):
vi. Describe your company’s experience with completing innovative industrial projects of similar scale.
(1,400 characters maximum):
13
vii. Provide information for key project team members2:
Name:
Role:
Organization:
Relevant Experience/Expertise:
Name:
Role:
Organization:
Relevant Experience/Expertise:
Name:
Role:
Organization:
Relevant Experience/Expertise:
Name:
Role:
Organization:
Relevant Experience/Expertise:
Name:
Role:
Organization:
Relevant Experience/Expertise:
b) Innovation i. Describe how the project is innovative for the Canadian forest products sector. (e.g. Is it an entirely
new product or technology, a first implementation in the Canadian forest sector? Is it an innovative
solution to a specific industry or regional challenge?). (2,700 characters maximum):
ii. What is the technology or market gap addressed by this project? (1,400 characters maximum):
2 Add or remove sections as necessary
14
iii. Do you have the rights to operate the IP for the life of the project? Is the project expected to