Tutorial 5 Surface Modeling 1 Copyright 2006 JD Mather Inventor 11 TUTORIAL 5 Derived Work Surfaces Learning Objectives After completing this tutorial, you will be able to: Construct and use surface features in solid modeling Incorporate surface features in part design when appropriate Create Drafted Ribs Use Derived Work Surfaces Required Competencies Before starting this tutorial, you should have been able to: Construct, constraint and dimension sketches Project geometry on sketch planes Extrude sketched profiles Revolve sketched profiles Loft sketched profiles Understand the concepts of work and placed features Understand how to manipulate the history tree in the browser Figure 1: Ice Cube Tray
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
After completing this tutorial, you will be able to:
Construct and use surface features in solid modeling Incorporate surface features in part design when appropriate
Create Drafted Ribs
Use Derived Work Surfaces
Required Competencies
Before starting this tutorial, you should have been able to:
Construct, constraint and dimension sketches Project geometry on sketch planes Extrude sketched profiles Revolve sketched profiles Loft sketched profiles Understand the concepts of work and placed features Understand how to manipulate the history tree in the browser
Figure 1: Ice Cube Tray
2 Surface Modeling
1. Start a new Standard(in).ipt and sketch Figure 2.
Figure 2
2. Extrude the sketch down a distance of .85in with a taper of -6°.