Introspect-11 Manual English

Contents: Program "Introspect"……………………………………………………………………4

Administrator ........................................................................................................ 7 Patient’s index data ............................................................................................ 11 Examination procedure ...................................................................................... 15 Saving to disk ...................................................................................................... 18 How to determine the modulation resonance frequency ....................................... 21 Analysis (examination)....................................................................................... 22 Preparing medicine ............................................................................................ 23 Standards ........................................................................................................... 25 Analysis .............................................................................................................. 37 Collecting data ................................................................................................... 43 Comparative analysis ........................................................................................ 44 Entropic analysis ................................................................................................. 45 NLS Analysis ...................................................................................................... 47

Program Introspect

Introspect Program is meant for computer nonlinear analysis and virtual informative testing of

bioactive supplements.

www.introspect-eu.com

Program Introspect

If you press the button "Program Setup" you will see

the setup layout, where you can change the language

(choose Russian or English), also turn on/off the sound,

change the font size and correct the processor deviation

if needed. To correct the processor

deviation you need to move the triangle sign above the scale to correct the

estimation point grade on the organ

projection if the point estimation

parameters change due to the processor

peculiar features compared to the

standards of the processor chosen upon

authorization.

To chose the analysis performing operator from the list, press the button "Operators".

When you run the program you will see the set of

buttons called Main Menu. To start working with the

program click the button "Examination

(Analysis)".

To obtain the data concerning the software designers

press the button “Developers”.

.

Program Introspect

Here you are entitled to: Press the button "Color" to make colored pictures, if you click this button twice the pictures will become black-and-white.

The button "Index Color" allows to mark the names of the organs with different functional capabilities with various colors

in the examinations performed.

Green line means the organs are without any marked functional deviations.

Red line means the organs have slight functional deviations.

Brown line means the organs have marked functional deviations.

The button "Exit" allows to quit the program.

Administrator The button "Administrator" allows the equipment owner to enter the

administration mode of operation which gives the exclusive rights to:

- Setup (change) the password in the administration mode by pressing the button

"Change password";

- Open or close patients’ card index filing for other users by pressing the button

"Close card index"

- Turn on or off the mode fixing the payment made by patient for the performed

analysis by pressing the button "Register payment"

To delete the patient’s card

press the button "Delete card"

In the right column, to delete a

single examination record press the

button "Delete analysis" above the

list of examinations.

Administrator

To delete the information about all

examinations of all patients performed

before the specific date press the button

"Delete on date basis". Specify the

date in the window "Delete on date

basis"; all examinations performed

before the specified date will be deleted.

To find the list of the operating specialists using this equipment press the button "Choose operator". If

you choose the last name of any individual

specialist you will see the card index of all his

patients.

To widen the range of operating specialists using this equipment you can press the button "New" in

this catalogue; also you can exclude several users

from the list by pressing the button "Delete", the

card index of the patients supervised by such users

will be automatically deleted. To move the patient’s

card from one specialist to the other press the

button "Exchange".

Administrator

To perform the statistic analysis concerning the period of analysis and the quantity of patients

examined and the quantity of examinations

performed individually by each user and all

specialists together and also to perform financial

analysis of each scientific department activity

press the button "Report".

Program Introspect

Before the examination the patient is sitting

in front of the monitor with earphones on,

which have built-in magnetic-inductive devices. The

ear-phones have to be put on in accordance with the

following signs: R is for the right temporal part, L is

for the left temporal part. The infra-red transmitter

has to be put symmetrically in front of the eyes not

father than 80 cm (it exist only in old versions of device).

The card of the patient

When the button "Analysis" is pressed you

can see the "Patient’s card", which

contains all his/her relevant data: last

name, first name, middle name, age,

gender, address, and also the telephone

number can be indicated if available.

"Saving to floppy disk" allows to save the examination data and results of the chosen patient to floppy disk with further possibility to copy this information to the program.

The below table contains the complete information concerning the examination

of the selected patient.

If you press the button "New" you will see the form which has

to be filled in according to requirements. It is necessary to

indicate the last name, the first name, the middle name, age,

address, telephone; gender is indicated by choosing from the

list.


If you press the button "Choice" you will

see the the layout of "Patients’ Card

Index", which contains the information

about all patients supervised by the

chosen specialist, the following

information will be available: the last

name, the first name, the middle name, age, gender, address and telephone if

available. Please note that this form can be

closed by the administrator if necessary. To

find promptly the card of a specific patient

in such layout enter his name (or first letters

of his name might be sufficient in some

cases) into the line "Patients’ Card

search". The similar search system is

applied in "Patient’s card" layout.

To print out the recommendations prescribed by the specialist on the basis of the examination results press the

button "Print the conclusion".


If you press the button "Print the Examinations" the examinations’ results

are prepared to be printed.

The program allows to print up to 4

pictures with 100X100 mm size on one A4

formatted list.

Besides, there is a possibility to look up

the older "Recommendations", by

depicting for analysis and printing (buttons

"Recommendations" and "Print

Recommendations") the master

processes with large spectral

diagrams taken from the patient (where the difference coefficient (D) is

less than 0.425).

The program allows to print the most

efficient bioactive supplements,

determined by the specialist on the

basis of the performed analysis or to

adjust the supplements prescribed earlier

by exiting the print preparation layout and

going to the analysis operation mode

(button

"Examination (Analysis)") To print the additional recommendations and notes prescribed by the specialist to the specific patient press the button

"Print Notes".

To stop printing in order to print on both sides of the sheet please press "Pause between pages".

To make the pictures colored press the button "Color", if you turn it off the pictures will be black-and-white.

To print press the button "Print".


If you press the button "Diagram" under the picture

of the examined system you will see the diagram

with frequency-domain measurements of existing

system, which was taken while the examination

was performed. To return to the organ picture press

the button "Picture".

The main elements of managing "Patient’s card menu":

"Current Analysis" is the current analyses of the results of the examination performed with the possibility of conducting additional analysis by connecting

the patient up to the device or without connection (in this case the button

"View the Results " is pressed).

"Comparative Analysis" is the comparative analysis of the results of

several analysis when the patient’s systematic examinations are performed.

If you press the button "Examination" you will see the layout of "Examination

Procedure"

Examination Procedure Layout “Examination Procedure” is meant to prepare the

object for examination.

To perform the automatic choice for profound detailed analysis of biological system depending on the marked

deviations from the existing norms in it’s elements press the button "Program Selection".

The button "Personal choice" allows the operator to choose individually or exclude several pictures from

Examination Procedure "Examination Procedure" list by putting or removing the flags on the left side from the name of the picture by pressing the left button on the mouse. The button "Cancel choice" removes the examination scheme of all pictures.

The button "Restore choice" restores the examination scheme of all pictures.

The button "Alphabetic order" classifies all pictures alphabetically.

The button "Card index" allows to enter Card Index menu.

The button "Current Analysis" shows the current analysis of the examination results.

The button "Supplement (Medicine)" allows to prepare the supplement automatically for the pictures, where the centers have been defined. After pressing this button it is essential to define the necessary settings in “Supplement Preparation”

menu and press the button "Start Preparation".

The Examination Nature:

Express allows to perform the analysis based on complete topographic

pictures without detailed elaboration.

Standard allows to examine specific biological structures only

when pathologic changes are present.

Detailed allows to evaluate the structure of all biological formations that can

be essential to perform the qualitative scientific investigations.

Examination Procedure

By pressing the corresponded icon in the mode "Icons" you can enter the examination procedure of the icon which

is anatomically or functionally linked with the original picture of the object without using the textual diagram

of the examination (or if it has been examined already you can enter to the mode of current analysis).

Saving to floppy disk

If you press the button "Save to

floppy disk" you will see a special

layout in the card index which allows to

copy the examination data of individual

patients to floppy disk or from floppy

disk to the existing patients data

catalogue.

First of all the saving mode has to be selected: "From program"

or "To program"

"From program" allows to copy the examination data of individual

patients to floppy disk.


You can correct the examinations list of the chosen patient before

saving it to floppy disk by putting or removing flag marks.

Further press the button "Create a list" and the chosen

examinations will be transmitted to the right part of the layout.

The button

"Clear the

list" removes

the whole list of

patients and

examinations

which are to be

copied (without

deleting the

original).

To start saving

to floppy disk

insert the floppy disk to the disk drive and press the button "Saving to

disk" or chose the source where the chosen information has to be copied.


The button "Cancel choice" removes

the flag marks from the examinations’

list prepared for being copied.

"Delete" button removes the chosen examination from the list of

examinations ready for being copied.

"Picture" button allows to see the

picture of the chosen examination of

the precise patient.

To exit the copy mode press the

button "Exit".

The "Program" button allows to copy the examination data from the floppy disk to the existing patients’ catalogue in the computer. When choosing this mode, please indicate the source of data (floppy disk, CD) and in the list of patients and

their examination data ready to be copied to the computer will be displayed in the right part of the layout. To enter this

data to the program from the floppy disk press the button "Copy".

How to determine the modulation resonance frequency

Organ pulsing picture.

The button "Stop/continue" allows to

make a pause in the examinations. If you want to continue the automatic examination press the “Continue” button. Press button “Back” to go to the “Examination Procedure”.

The mode “ Determination of the modulation resonance frequency” offers the possibility to determine the spectral characteristic of the lesion focus, all main buttons are similar to the mode of determination of system modulation resonance frequency.

The scale of the on-off time ratio of

the impulse of the signal under study.

The diagram of measured signal

amplitude distribution according to

standard frequencies 1.8 - 8.2 Hertz.

Comparative diagram of the noise level in the system in decibals.

Relative diagram in points showing

correlation of efficient signal/noise.

In the bottom of the screen there is a

picture of logarithmic polychromy

Fleindler’s scale.

Анализ

The mode "Examination" allows to

measure the intensity of the destructive

process in the control data points which

are located in the standard places on the

picture, the results are estimated at the

6-grade polychromy Fleindler’s scale, it’s

buttons are on the screen bottom at the

right corner. The button "Stop/continue" allows to make a pause in the examinations.

Press the button "Exit" to go to

“Examination Procedure” mode.

Grades estimation of the results of NLS Analysis.

1. Latent functional activity level.

2. Optimal regulation level. 3. Characteristics at the higher level,

tension status of regulatory systems.

4. Asthenic status of regulatory

mechanisms.

5. Compensated abnormalities of the adaptation mechanisms.

6. Decompensation of the adaptation mechanisms, marked destructive processes.

Analysis

It is important to remember that the offered grades scale is set up mostly for characterizing the dynamic of the adaptation reserves increase/decrease; even the stable destructive status without evidently marked dynamic changes is

poorly registered in such scale.

Natural frequency of the lesion focus is transformed into the frequency of opposite polarity but identical form and as a transformed and enforced information is recorded to such matrix as water, ethyl alcohol, sugar, paraffin. The water with recorded information is recommended to stop the acute process. Such water supplement is effective for 2-3 weeks only, after that period the medicine is not effective. Alcohol is used to treat the sub-acute or chronic processes. In order to eliminate the chronic process it is recommended to use also alcoholic solution of phytomedications, since it

Preparing Medicine

Preparing medicine

prolongs it’s efficiency period. Effectiveness of the alcohol based medicine lasts up to 2-3 months and 4-6 months is effective for medicine based on alcoholic solution.

To eliminate the chronic processes it is possible to record the information to milk sugar, in this case the medicine will be

effective for 6-9 months, but the sugar has to be slightly moistened with alcohol or water while the medicine is being

prepared.

One dose for acute critical process treatment is 4-8 drops or peas 3 times a day. For children younger than 14 is

for 2-3 drops less. For sub-acute and chronic processes treatment the dose equals to 2-4 drops (peas) once or twice per day. For

children younger than 14 is for 1-2 drops less.

Paraffin is applied in dermatological treatments for skin pathology and for cases with peripheral nervous system lesion

(radiculitis, neuralgia, lumbodynia).

To stop the acute processes it is possible to record from 2 to 4 medications for one matrix in single-step operation. For

stopping the sub-acute and chronic processes the medication quantity can be increased up to 6-8 items.

It is important to remember that the more apparent the voltage of the recorded medicines is the less medicine quantity can

be recorded to the matrix.

The button "Start preparation" initiates the medicine preparation process, the button "Stop preparation" terminates

the medicine preparation process.

The button "Invert" allows to modify the output signal into opposite polarity signal. Such mode allows to record the

medicines successively from various lesion focuses evident in one and the same organ (body slice). To switch the lesion focuses press the left button on the mouse when pointing the arrow to the focus in question.

Standards

and etc. When the frequency characteristics are taken form the tissue, the

program can compare them on the basis of their spectral similarity to the standard

processes data (healthy, pathologically modified tissues, infection agents) and

reveal the most similar pathological process or tendency for its acquisition. Using

this analysis procedure you can monitor the status of the incoming signal (it is

marked with red color (S)) and outgoing signal (it is marked in blue (N)). They are

shown as diagrams on the screen. Looking at these diagrams it is possible to determine

Each cell has its unique specific

oscillations, which are recorded to the

computer memory and can be displayed

at the screen as a diagram which

reflects the conditions of information

exchange happening between the tissue

and its environment. Each pathological

process has also its unique exclusive diagram. The computer memory

contains a huge number of pathological

processes with different considered

deviations such as process intensity,

age, gender

\

Эталоны

which standard process is closer to the one displayed and also to monitor the spectral similarity degree between the

standard process and the patient’s diagram data.

"Group list" contains the list of the

organs’ groups.

“Organomedicine” contains the

standards of the spectral

characteristics of the healthy tissues.

The "Standards List" below contains standards which are organized on the

basis of spectral similarity decrease

with the object under study. Healthy

tissues almost do not have any

differences or dissociation between

incoming and outgoing signals (red and

blue diagrams correspondently). The

less the differences between the

organomedicine and the object are,

the more integral the examined tissue

is, the more such differences are the

less integral the tissue is.

Standards

Biochemical Homeostasis

the index mode, and the extremes values 1 and 7 will characterize the figures value of the biochemical indexes beyond the bounds of the physiological standard

norms, lower and upper correspondently.

The results of the biochemical analysis on computer will be correct only if the

standard rules for carrying out the biochemical analysis by traditional methods in

the clinic are applied.

Allows to perform the qualitative estimation of the main biochemical

data via wave undulate tissues

functions. The evaluation of the

biochemical homeostasis is

performed in the NLS Analysis mode.

It is necessary to remember that the

lowest indexes of the enzymes

(hormones) concentration within the standard range should be at the

point 2 on the diagram, the upper

indexes within the standard range

should be at the point 6. The figures

value at the rate 3,4,5 corresponds to

Standards

PATHOMORPHOLOGY

Here you can find the list of standards applied for destructive processes. This

section contains the main patho-

morphological conditions inherent to

the individual organism tissues. Each

destructive process has its own specific

diagram.

Standards

Microorganisms and Helminths

This section contains the main characteristics of infection agents: bacteriums, viruses, riketcias of mycoplasma, fungi and helminths. Usually the highest dissociation level can be seen in the frequencies where the tissue frequencies to

which they have trope are present.

For example opisthorchosis has high dissociation at the

frequency level 4.9 Hertz for urogenital system.

The allopathy group contains the wave undulate characteristics of the main chemical (synthetic) drugs used in traditional

medicine.

Homoeopathy

This group contains the wave undulate characteristics of the homeopathy medicine.

Standards

Phytotherapy

This group contains the wave undulate characteristics of the medicinal plants which grow in the middle region of Russia.

Nutrients

This group contains the wave undulate characteristics of the biologically active supplements (BAS) of the main Russian and Foreign companies producing food supplements.

Allergen

This group contains the wave undulate characteristics of food, domestic, vegetative and industrial allergens.

Individual tissues’ frequencies are lie in the following standards of frequency range. 1.8 Bone system.

2.6 Crude conjunctive tissue, joints, mitral valve.

2.6-3.4 Porous conjunctive tissue, intertransverse muscular system, cardiac muscle.

3.4 Unstriped muscular system.

4.2 Monolayer flat epithelium of digestive tract.

4.9 Multilayer flat and prismatic epithelium. Parenchymatous tissue of the liver и bile-excreting tissue.

4.9-5.8 Epithelium of the kidney tissue and reproductive organs.

5.8 Gullet lymphatic plexus, upper level of the respiratory tract, lymphatic system, spleen, ovaries,

prostate. 6.6 Peripheral nervous system, bronchial epithelium, adrenals, thyroid gland.

7.4 Central sections of sensory analyzers except for optical, subcortical cerebral structure, cerebellum, limbic

system and bronchial parenchyma.

8.2 Eye retina, optic nerve, cerebral [brain] hemisphere cortex.

Standards

Next to the diagram you can see the following control

elements:

"Object" shows the diagram of the examined

biological object, organ or tissue which was taken

during the examination.

"Stndard" shows the diagram of the chosen standard

process.

"Spectrum" press this button to see the enlarged

diagram.

"Optimum" the yellow diagram shows the normal signal

distribution for standard frequencies.

"Model" shows the diagram of virtual model.

"Invert" this button allows to convert the diagram to the diagram of the opposite polarity.

The button "Clear" which is above the list of standard groups terminates the

possibility of dispersing analysis for all groups simultaneously.

Standards

The program offers the unique

possibility to compare the value of the spectral

similarity of all recorded medicine with spectral

characteristics of pathological focus. The marked

section contains the data of spectral differences

(D) of the standard data and the object. If the index is less than 0,425 this means that the spectral

similarity with the object under study is more than

95%, where this standard is marked in red. The

clinical importance for statistically reliable data

concerning the process manifestation is considered

if the value of such data does not exceed 0,750

(similarity with examined object is more than

65%).

By mathematical summing up of the spectral

characteristics of information medications it is possible to obtain the better combination of medications on the basis of

the similarity of spectral characteristics of pathological process and consequently choose the most effective medicine. The possibility of combining the frequencies of pathological agents helps to experiment with creating the virtual models

of various pathological process. The creation of such virtual models is necessary for example for choosing the

medicine groups which give better results in complex.

Standards

To sum up the standards in order to create the virtual model press the left button on the mouse in the first

column in the standards list opposite the chosen

standard. To deduct from the virtual standard mode

press the right button on the mouse. To switch off

the virtual modeling press on [X] sign in the

right column in the standards list opposite the

virtual model. If the spectral differences (D) of any

of the summed medicine and object taken separately exceed the value of their mutual combination model

then it shows the medicine synergy. If the value is

less it means interaction antagonism.

Control elements of “Standards” layout

The button "Virtual Activation" is virtual activation of pathologic process.

The process can be in the remission state when we are interested in its active status. If

you press this button the chosen standard is tuned to the spectral characteristics of the

examined object. To tune all standard processes from the standards list press the button "ALL".

Standards

"Vegeto-test" allows to use the internal vegetative resonance test mode where the

medicine is chosen from the standards catalogue. "Reprint" allows to record any medicine from the standards catalogue to the matrix

(water, alcohol, sugar, paraffin).

"Standard description" shows the detailed description of the chosen standard.

"Entropic Analysis" allows to perform the 2 factors entropic analysis of the

pathologic process.

"NLS-Analysis" allows to perform multifactor entropic analysis of the pathological

process (biochemical homeostasis of the system).

"Standard-Object" allows to perform the dispersing analysis of the optionally chosen

standard conferring on it object functions.

"Recommend" allows to mention all standards with high spectral similarity with the object under study in the printed document.

"Recommendations" displays the list of the standards chosen for print.

"Absolute model" allows to construct the most optimum virtual mode by creating a

complex program algorithm which helps to consider all possible matching of the

standards.

"Imperative model" is the function similar to “Absolute model” except for the fact

that the virtual model is created on the basis of optionally chosen one (control)

standard taken to estimate its spectrum influence on the model creation.

The sign 00 for other model standards means that the control standard’s

participation in the model creation is reduced to minimum.

Standards

The button above the list of standards:

"Fixation" allows to fix three lines in the upper part of the list:

the name of the biological object

optimal distribution

virtual model

"Sort" sorts all standards alphabetically.

"Filter" allows to mark the group of standards which have similar last word in their names.

The search line in the left lower corner under the standards list allows to find easily the necessary standard only by entering the first letters of its name.

Analysis

Buttons above the organ picture

"Text" allows to obtain information concerning the individual fragments on the picture. To obtain this information press the button "Text" and you will see symbols on the screen displayed as green crosses. To read the text put the mouse arrow to the cross and the message will be displayed next to it in the rectangle. To print this message press the left button on the mouse and tick the square on the left from the text in the layout displayed. This mode also allows to move

promptly to the picture

examination to analyze the icons

with obtained data. If you press the

button "Icons" you will see the icons.

To see which picture can be displayed

from the icon put the mouse arrow on

the icon and you will see the name of

the picture in the rectangle next to it,

press the mouse button on the icon to unfold the correspondent organ for examination.

The button "Description" allows to see the description of biological object displayed at the picture.

The button "Focuses" allows to hide or display the earlier marked focuses on the picture.

Analysis

You can also display (hide) the focus by pressing the left button on the mouse while pointing it to the focus.

Scaling: if you pres the button with "+" sign in the upper left corner of the picture it will enlarge the chosen area on the

picture. After that click on the picture and stretch the frame by moving the mouse and after you mark the necessary area

click the mouse for the second time. The second click restores the total picture from the fragment.

Analysis

"Comparative analysis" is comparative analysis of the examination results when the

patient’s case is followed-up.

"Meta-correction" if you press this button you will enter the mode which allows to

correct the influence by using the infrared scanner. It is necessary to set up the center of

impact influence on the picture projection and press the button "Start".

Analysis

"Vegetative Test"

Using the mode of vegetative resonance test gives great opportunities and the possibility to add to the personal patient’s

electro-magnetic oscillation counter the electro-magnetic oscillation of the standards from the testing set – internal

vegetative test or taken by using the resonance camera – external vegetative test and to define the effectiveness of the

biologically active supplements (BAS) or their influence on the patient’s organism and it’s allergic reaction. To perform

the vegetative test using the medicine which is not in the BAS allergic standards catalogue, enter the mode "Analysis",

place the medicine under study to the resonance camera, press the button "Vegetative Test", enter the name of the

examined medicine and press the button "ОК". For better monitoring of the dynamic of vegetative reaction of the

organism to this medicine use the mode "Comparative analysis" which calculates the intensification and weakening of organism compensatory reaction when the information influence is performed by the testing medicine.

The internal vegetative test is performed in "Standards catalogue"

mode, by pressing the mouse left button choose the medicine from the

standards’ list where the medicine is already written as a digitized mode.

To start this mode press the button "Vegetative test"

Reprint

Allows to record any nutritious substance to the matrix. Enter the menu "Standards Catalogue" and choose the medicine

which is effective for this patient (value "D" should not exceed 0.425) and press the button "Reprint". It is important to

remember that all medicines are recorded in the inverted form and it has to be re-inverted on the diagram before medicine

preparation by pressing the button “Invert"; then you chose the matrix in the similar way the matrix is chosen when

preparing nazods and press the button "Start Preparation".

Analysis

Analysis

The button "Estimate the fragment" allows to estimate in more details the marked zone on the picture projection using the scaling mode.

"Localization" allows to determine the

frames of the focus with the most evident

structure deviations. To determine the

frames press the left button on the

mouse pointing the picture projection

and mark the area under study; to close

the counter press again the left button on the mouse.

"Estimate" allows to estimate the

focuses of the most evident deviations

on the picture chosen by the specialist.

The estimation goes automatically, non

marked pictures and pictures without

focuses are omitted.

"Delete paste" allows to delete the marked focuses. To mark the focuses press the mouse right button.

Above the diagram of the organ (focus) you will see buttons "Test" and "Spectrum". If you press the button "Test" you

will see the form "Standards". The button "Spectrum" shows the enlarged diagram with amplitude values of the signal

by the spectrum frequencies.

Collecting data

This mode is intended for the patient’s

active participation in the process of

data collection and allows to get into

more personal contact in the Patient - Operator dialog.

Using the method of the dynamic point

the operator can localize more

precisely the zone of body destruction.

Comparative Analysis

Comparative Analysis allows to estimate (in figures) the result of the correction made in dynamic, and to analyze the status of compensatory reactions of the system after the vegetative test of the medicines. The left picture

characterizes the initial state, the right shows the state of effects in dynamic or after some period of time. The button

"Auto Search" allows to find automatically the compared organs in the common data index. The buttons

"Improvement" and "Deterioration" allow to emphasize the sections in the tissue structure where the changes have

been noticed.

Enthropy Analysis – available in the mode "Standards’ Analysis"

Enthropy (2 factor) analysis allows to

construct mathematic criterion of the

pathologic process, considering the

healthy tissue (organic medicine) as a

basis stage and clinically evident form

of any pathologic process as a final

stage and mathematically calculates

the diagrams of a number of

intermediate states. During analysis

the most similar state to one of the

intermediate states (or final state) is

determined in order to show the maturity of the process.

It is necessary to consider that the

entropy index data at the values 1, 2

shows that there is no tendency in the

development of the process under

study; 3, 4 show the pre-clinical stages

of the process; 5,6 shows the maturity of the process.

Low spectral similarity with the standard (correlation exceeds 1) if the entropy data

value is high at the level of 5 or 6 shows the remission status of the pathological process with low adaptation reaction levels of the tissue.

Entropic Analysis

The small difference in spectral similarity (dispersion) of all range of entropic data from 1 to 6 shows the acute process.

The more similar diagram in spectral characteristics is marked by bold line on the diagram and the value is marked in red,

in our case it is 0.760.

To look at the diagrams separately or together press the correspondent buttons in the layout "Hide N(S) diagram”

Press the button “Surfaces” to look at the diagram in the mode "Surfaces", to return to the mode "Lines"

press this button again.

Entropic Analysis

The button "Object" reflects the most optimal

values of the process under study.

"Vera-Test" shows the diagram with the most

spectral similarity.

Энтропийный анализ

To monitor the dynamic of the process press the button "Dynamic" above the

diagram.

The button "Spectrum" shows the enlarged diagram.

The button "Exit" allows to exit the entropic analysis.

"Interdance - Screening" allows to monitor the destruction degree of different

tissues with developing destruction process. It is possible to monitor the intensity of

destructive changes in all groups of tissue structures simultaneously (button" Е "), and

separately by morphological groups. Button "А" (red) reflects the arterial system;

Button "V" (blue) venous system;

Button "N" (yellow) nervous system;

Button "L" (green) lymphatic system;

Button "М" (orange) musculoskeletal [locomotor] system;

Button "О" (lilac) the rest groups of tissues.

NLS Analysis is accessible from the mode "Standards analysis"

NLS- analysis (multivariate) is identical with entropic analysis except the fact that all intermediate stages in

NLS – analysis are recorded as standards from the

biological object in different stages of destructive process to

allow to construct the more precise model of the process

development. It is a very complicated and laborious form

of recording the process and that is the reason why the

NLS-analysis is used only to evaluate the biochemical

indexes.

The growing amplitude of the outgoing signal (blue line on

the diagram) reflects the intensification of compensatory

mechanisms. At its maximum value the diagram of the

incoming signal can abruptly drop down when the amplitude of the incoming signal (red line) is high. This

means that the adaptation mechanisms are broken and

the irreversible state is developed