Introduction to the 3 d print & scan workshop on the digital days at ucn

April 2013 - Ulla lunde Ringtved - [email protected] . [email protected]

Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN

Welcome to the 3D scan & print workshop

• Examples of the 3D printing technology mostly concerning buildings

• Examples of the 3D technology in other areas• Local 3D-developers visiting on The Digital Days• Some useful programs for the workshop

April 2013 - Ulla lunde Ringtved - [email protected] . [email protected]

Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN

ESA building a lunar base with 3D printing

http://www.esa.int/Our_Activities/Technology/Building_a_lunar_base_with_3D_printing

Lunar Base Design

ESA = The European Space Agency

April 2013 - Ulla lunde Ringtved - [email protected] . [email protected]

Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN

Working on the lunar base

http://www.fosterandpartners.com/news/foster-+-partners-works-with-european-space-agency-to-3d-print-structures-on-the-moon

/

http://inhabitat.com/foster-partners-unveil-plans-for-3d-printed-moon-base/foster_partners_lunar_base2/?extend=1

April 2013 - Ulla lunde Ringtved - [email protected] . [email protected]

Introduction to the 3D Scan & Print Workshop on the Digital Days at UCNThe ”paper material” for ESA`s 3D-printed lunar

base

“The UK’s Monolite supplied the D-Shape printer for ESA's 3D-printed lunar base study, with a mobile printing array of nozzles on a 6 m frame to spray a binding solution onto a sand-like building material. 

3D ‘printouts’ are built up layer by layer – the company more typically uses its printer to create sculptures and is working on artificial coral reefs to help preserve beaches from energetic sea waves. First the simulated lunar material with magnesium oxide – turning it into ‘paper’ to print with. Then for structural ‘ink’ a binding salt is applied which converts material to a stone-like solid.” http://spaceinimages.esa.int/Images/2013/01/D-Shape_printer

April 2013 - Ulla lunde Ringtved - [email protected] . [email protected]

Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN

3D printed Protohouse

Softkill Design, an english architecture team, has entered the race of creating and building the first 3D printed house http://www.gizmag.com/softkill-3d-printed-house/26305/ http://www.softkilldesign.com/project/

April 2013 - Ulla lunde Ringtved - [email protected] . [email protected]

Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN

The Canal House

”The Canal House” from DUS Architects in Amsterdam. They intend to print it ”on site”, and are planning to print the first facades and rooms in this year 2013, http://inhabitat.com/dus-architects-plan-to-3d-print-an-entire-canal-house-for-amsterdam/

April 2013 - Ulla lunde Ringtved - [email protected] . [email protected]

Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN

The Canal House and the KamerMaker

To develop their 3D printed Canal House DUS Architects has invented their own 3D printer, which is 6 meter tall and called KamerMaker http://www.dusarchitects.com/news.php?newsid=168

Video about KamerMaker http://vimeo.com/36027546#

April 2013 - Ulla lunde Ringtved - [email protected] . [email protected]

Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN

The Landscape House

”The Landscape House”, A twisted loopy 3D-printed building by the dutch architect Janjaap Ruijssenaar to be finished building in 2014 http://news.cnet.com/8301-11386_3-57565073-76/3d-printer-to-carve-out-worlds-first-full-size-building/

http://www.3ders.org/articles/20130115-dutch-architect-to-build-endless-house-with-3d-printer.html

http://www.dezeen.com/2013/01/24/3d-printed-house-interview/

April 2013 - Ulla lunde Ringtved - [email protected] . [email protected]

Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN

3D eco-system

Paul Brody, CEO at IBM, see the 3D-printing, Intelligent Robotics and Open Source Electronics as three Technologies that will transform manufacturing and as an eco-system of open source software, 3D scanners, crowdfunding and material-technology which will challenge the production industry and course a rapid need for change:http://ing.dk/artikel/ibm-3d-print-kan-aendre-hele-produktionsindustrien-157337

See his slideshow here :http://www.slideshare.net/pbrody/the-software-defined-supply-chain

April 2013 - Ulla lunde Ringtved - [email protected] . [email protected]

Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN

3D print technology in other areas

3D-printed dresses you cant sewhttp://ing.dk/artikel/3d-printede-skorter-pa-catwalken-i-paris-135801

3D-printed headphones http://3dprintingindustry.com/2012/10/15/3d-printable-headphone-design-experiment/

3D print = The next industrial revolution http://ing.dk/artikel/fremtidsforsker-3d-print-bliver-den-tredje-industrielle-revolution-134489

3D-printing on nano level http://ing.dk/artikel/lasershow-booster-3d-printere-print-et-mikro-rumskib-paa-under-et-minut-157343

April 2013 - Ulla lunde Ringtved - [email protected] . [email protected]

Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN

3D measure, scan & print company(visiting)

http://www.kvejborg.dk/

How to scan: http://www.youtube.com/watch?v=8wAMZo9lFrg

Measurement: http://www.youtube.com/watch?v=QZ2p8xIblAA

April 2013 - Ulla lunde Ringtved - [email protected] . [email protected]

Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN

3D-print- and printermaking company(visiting)

www.thy3d.dk

Build-your-own-printer-kits

April 2013 - Ulla lunde Ringtved - [email protected] . [email protected]

Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN

3D modelling apps

A free 3D modelling program: http://www.123dapp.com/

April 2013 - Ulla lunde Ringtved - [email protected] . [email protected]

Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN

3D modelling apps

http://www.123dapp.com/make

http://www.youtube.com/watch?feature=player_embedded&v=jo5TxtKLmjM

April 2013 - Ulla lunde Ringtved - [email protected] . [email protected]

Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN

3D modelling apps

http://www.youtube.com/watch?feature=player_embedded&v=6aU2s85Zw3A

April 2013 - Ulla lunde Ringtved - [email protected] . [email protected]

Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN

www.thingiverse.com

3D- & Robotic things and apps you can make http://www.thingiverse.com/

April 2013 - Ulla lunde Ringtved - [email protected] . [email protected]

Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN

Instructables.com

Go to the 123Dgroup at instructables.com for help and inspiration http://www.instructables.com/group/123d/

http://www.instructables.com/id/A-fully-3D-printable-GlaDOS-Robotic-ceiling-arm-la/

http://www.instructables.com/id/One-Washing-Machine-Selector-Knob-to-end-all-Washi/

That`s all for now.Have a nice workshop on The Digital Days