Introduction To Rolltek Engineering Works 11 05 09

India

Shanta Industrial Estate

I. B. Patel Road, # 37

Goregaon East,

Mumbai- 400063

India

USA Sales / Engineering office

Detroit-Michigan

Provides onsite support

Factory Size: 4,000 sq feet.

Total Sale Annual: Year to date $ 6M

Confidential RollTek Engineering Works

Foundries:

Developed Foundry for S.G.I. Castings which meets US Standard.

Morgan

(India ) also buys complete requirements .

Facilities for all types of ferrous and non-ferrous castings locally .

Measuring Instruments:

Complete range of Measuring Instruments for manufacturing as well as

for Inspection.

Capability of CMM measurements

Quote Timing:

RollTek Engineering Works provides quotes within 48 to 72 upon

receiving inquiry for an RFQ.

INTRODUCTION TO ROLLTEK ENGINEERING WORKS

Confidential RollTek Engineering Works

INTRODUCTION TO ROLLTEK ENGINEERING WORKSKey Customer:

Qatar Steel Company (Dubai)

Advantages:

Cost advantages to current suppliers.

Part fits to current equipment / with no additional parts needed.

All parts will fit to current Ashlow / Morgan or other manufacturing equipment build types.

REW Roller guides are manufactured from a single piece casting (housing and roller holders) this design provides with a higher accuracy and a longer lasting part.

Other parts Manufactured at site:

Spindles

Conveyor Rollers

Shafts for applications

Non-Ferrous Bushings

Chockes

Liner plates

Sprockets

Gears

Shaft set Fasteners

Spacers (Shims)

Confidential RollTek Engineering Works

Roller Guide Box No 210 Conventional type to finish rounds Max190mmDia

Confidential RollTek Engineering Works

Roller View

Roller Guide box no 0820 Cassette type design with frame to finish rounds max 14mm diameter

Confidential RollTek Engineering Works

Roller Guide Box No 0820 , 0830 & 45. The Guide Box 0820 & 0830 are Cassette type where as Guide box No 45 is the Conventional type. Capacity of 0820 is to finish max dia 14 mm , 0830 to finish 22 mm and box 45 is to finish maximum 35 mm dia.

Confidential RollTek Engineering Works

Roller guide box no 0820 cassette type with Frame to mount the Roller guide Box on the Rest bar.

Confidential RollTek Engineering Works

Roller guide box No 45 but Conventional type

Confidential RollTek Engineering Works

R.G. Box No 0845 angle view

Confidential RollTek Engineering Works

Roller Guide Box No 0845 Cassette design with frame

Confidential RollTek Engineering Works

2 Roller guide box No 0835 (Heavy Duty New Design ) supplied to Qatar Steel Doha Qatar Units.

Confidential RollTek Engineering Works

Roller guide box No 0860 Cassette type with Frame capacity to finish rounds maximum 45 mm diameter.

Confidential RollTek Engineering Works

Front View

Roller guide box 45 another view

Confidential RollTek Engineering Works

Same as above Roller view

Confidential RollTek Engineering Works

Grooved Hardened and Ground D2 Quality Roller guide box No 0830, 0845, 0860,0885

Confidential RollTek Engineering Works

Twister Rollers D2 quality for Roughing and finishing design Roller guide box.

Confidential RollTek Engineering Works

Twister roller D2 quality for Roughing and finishing Mill Guide RS6C

Confidential RollTek Engineering Works

Side view

NTM Delivery Strippers with Saddle for mounting. Material: Special Composition of Stainless Steel to withstand Wear & tear at high speed without scratching the Bars.

Confidential RollTek Engineering Works

Entry & Exit Guide (Strippers ) for Ovals, Rounds, Preovals, RCS, Squares and Diamond sizes range from 30 mm to 190 mm

Confidential RollTek Engineering Works

Same as SR No: 1 entry side view

Confidential RollTek Engineering Works

Forged CK45 Grade Spindle for 8", 10", 12" 16" 18" 20" Mill

Confidential RollTek Engineering Works

Housing design roller guide box size RE7

Confidential RollTek Engineering Works

Side View

Same as SR No:1

Confidential RollTek Engineering Works

Same as SR No: 4

Confidential RollTek Engineering Works

Roller holder Comparison Box No 20 & Box No 125

Confidential RollTek Engineering Works

Same as SR No: 26 but close view from entry side

Confidential RollTek Engineering Works

Roller Guide Box No 85 design Conventional type to finish rounds Max 70 mm Diameter

Confidential RollTek Engineering Works

Roller Holder Left & Right side Design guide box no RE113

Confidential RollTek Engineering Works

R.G. 45 Side view

Confidential RollTek Engineering Works

Roller Holder Left & Right side Design size RE4

Confidential RollTek Engineering Works

Roller holder Design Left & Right Side for Box No 60, 85, 125and 155 (Range)

Confidential RollTek Engineering Works

Roller Guide Box no 125 Special build per customer requirements

Confidential RollTek Engineering Works

Side View

Same as 29 Front View

Confidential RollTek Engineering Works

Roller View

Confidential RollTek Engineering Works

Same as 41 different view

Confidential RollTek Engineering Works

Design Static Guide with Cartridge to finish rounds From 8mm to 14mm Diameter

Confidential RollTek Engineering Works

Grooved Hardened and Ground D2 Quality Roller guide box No 125 and 155

Confidential RollTek Engineering Works

Roller Guide Box No 125 Conventional type to finish rounds max 100 mm dia

Confidential RollTek Engineering Works

Roller Guide box No RE115

Confidential RollTek Engineering Works