Introduction to OIS Display Development Standards Presented By: Skip Hagan OIS Project Technical Lead Entergy Fossil Operations.

Introduction toOIS Display Development Standards

Presented By:Skip HaganOIS Project Technical LeadEntergy Fossil Operations

A Moment For Safety

Look around! Listen for a second

or two. Give the horn a

couple of taps. ONLY THEN,

Back out of your parking space.

What is OIS?

Software and hardware thatgathers, stores, calculates, and displays...information from the generating units.

...used by operations personnel, engineers, and other local and corporate staff to better understand each unit’s thermal and economic performance and reliability.

An Operations Information System!

Plant

Before OIS

Data Acquisition/

Control System

Control Room

Generating plants were initially provided with the traditional suite of data acquisition and control systems.

OIS implementation

Entergy’s wide area network

WPF

OIS

serverinterface

buffer

Data Acquisition

& Control S

ystem

Control Room

Plant

The scope of OIS 2.3 is outlined below.

OIS at Entergy

Application No. of Displays (approx) Description

•Plant Summary 4 Production, Operations, Financials & Declarations•Controllable Losses Ov 1 Controllable Losses, Heat Rate, Costs•Controllable Losses 15 Diagnostics and Detailed Displays•Turbine Monitor 10 Performance & Efficiency,Heat Rate,Bearings•Generator Monitor 5 MVAR Advisor,Bearings,Stator•Boiler Monitor 7 Performance,Fuel Conditions,Burners,Limits•Condenser Monitor 5 Cleanliness,CWP Advisor,Assessment•Feedwater Heater Monitor 23 BFP Monitor,TTD’s,DCA’s,Status,Condition•Pump & Fan Monitor 9 Status,Bearings,Vibration•Water Chemistry Monitor 2 Advisor,Condition,Alarms,Limits•Cycle Isolation 3 Major Drain Monitor,Condition,Alarms•Transition Monitor 20 Startup and Shutdown, Turbine Roll and Load•Unit Dispatch Curve 2 Based on Ambient Temp.

Diversity & perspective

“Different strokes for different folks.”• Operations people want to know what their

systems are doing and how best to “tweak” the plant controls for optimum performance.

•Production and performance engineers need to analyze factors that affect capacity, efficiency, and reliability.

•Diagnostic specialists are constantly in pursuit of the slightest hint of system and component physical degradation or declining performance.

PI-ProcessBook®

Entergy’s power generation team is OIS enabled!

• Every OIS user is a potential developer through the ProcessBook (PB) desktop environment.• OIS users are consistently meeting their individual and site goals with the support of OIS and their own custom built displays.• Resolution of emergent and suddenly critical issues are facilitated through creative use of PB/OIS displays, for “just in time” analysis.• “Local genius” can be readily rolled out system-wide.

Need for standards

PI-ProcessBook® is the tool used to create our OIS displays. Displays are created by:

•Our I.T. application development and support team

•Plant operators and engineers

•Plant monitoring & diagnostic specialists

•Corporate plant support engineers

•Casual or occasional users

Opinions, perceptions & just good design

Reality Reality ISIS a perception!a perception!

Individual responses to displays are based upon their experience and training. Information must be presented in a way that is quickly perceived and readily understood.

•Similar displays must be consistently formatted; between displays and even between applications.

•Symbols, icons, and other graphical elements must be in concert with those used and recognized by the end users.

•Establish the fundamental ProcessBook environmental standards for all displays: Screen resolution, toolbars, etc.

Abbreviations and acronyms

•Develop an abbreviations and acronyms list to ensure consistent use throughout the application.(Gaining consensus and acceptance may prove to be a challenge.)

Common Abbreviations & AcromymsNOTE: It is preferable NOT to abbreviate words marked with an asterisk (*).

Abbreviation for

Displays

DescriptionAbbreviatio

n for Displays

Description

ACETAverage Cold End Temperature

  HP High Pressure

Achv Achievable   HR Heat Rate

Act Actual   HRH Hot Reheat

AH Air Pre-Heater   Htr Heater

Alt Alternate   Hyd Hydraulic

AOV Air Operated Valve   IB Inboard

Aux Auxiliary   In Inlet

Display Digits•Establish a logical constraint on display digits. Display only truly significant digits.

Use Of Color

•Use a “web ready” color palette to facilitate web interfacing.

•Color coding is more than decorative. It often carries a connotation that may be significant to the user that is not recognized by the developer. Ask questions, then, choose wisely.

0080FF0128255No RGB matchOrangeNA

8080001281280TealTeal16

0080800128128Dark YellowOlive15

80000012800Dark BlueNavy14

8000801280128VioletPurple13

808080128128128Gray – 50%Gray12

00800001280GreenGreen11

00008000128Dark RedMaroon10

C0C0C0192192192Gray – 25%Silver9

000000000BlackBlack8

00FFFF0255255YellowYellow7

FF00FF2550255FuchsiaFuchsia6

FFFF002552550TurquoiseAqua5

FF000025500BlueBlue4

00FF0002550Bright GreenLime3

0000FF00255RedRed2

FFFFFF255255255WhiteWhite1

RGB ValueHex

RGB ValueDecimal

Color Swatch

Microsoft Shade Name

StandardNamed Color

Color Preference

0080FF0128255No RGB matchOrangeNA

8080001281280TealTeal16

0080800128128Dark YellowOlive15

80000012800Dark BlueNavy14

8000801280128VioletPurple13

808080128128128Gray – 50%Gray12

00800001280GreenGreen11

00008000128Dark RedMaroon10

C0C0C0192192192Gray – 25%Silver9

000000000BlackBlack8

00FFFF0255255YellowYellow7

FF00FF2550255FuchsiaFuchsia6

FFFF002552550TurquoiseAqua5

FF000025500BlueBlue4

00FF0002550Bright GreenLime3

0000FF00255RedRed2

FFFFFF255255255WhiteWhite1

RGB ValueHex

RGB ValueDecimal

Color Swatch

Microsoft Shade Name

StandardNamed Color

Color Preference

Color and Trends

•When possible, color co-ordinate your trend pens with the corresponding graphical elements.

Each bearing is assigned a color

The corresponding trend trace is the same color.

Highlight the Index

•When using an index parameter for a set of trends, assign a specific color for the index trace. Use this “index color” in ALL your trends.

•When using an index parameter for a set of trends, assign a specific color for the index trace. Use this color in ALL your trends.

Navigation Sense

•Be consistent in the placement of navigation buttons. Develop a method, stick to it, and tell the users about it.

•The ability to navigate to the desired information, quickly, efficiently, and LOGICALLY can mean the difference between an application that is useful and one that frustrates the user.

In Conclusion

At the earliest possible stage of the development process:

•Define your proposed display standards.•Include end-user review and acceptance of the standards.•Publish the approved standards document.•Enforce compliance.•Check and adjust.

Standards Are Vital To Success!