1 Introduction to AutoCAD Commands Command Keystroke Icon Menu Result Line Line / L D raw > L ine Draw a straight line segment from one point to the next
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1
Introduction to AutoCAD Commands
Command Keystroke Icon Menu Result
Line Line / L
Draw > Line
Draw a straight line segment from one point to the next
2
3
Command Keystroke Icon Menu Result
Circle Circle / C
Draw > Circle > Center, Radius
Draws a circle based on a center point and radius.
4
5
6
Command Keystroke Icon Menu Result
Erase Erase / E
Modify > Erase Erases an object.
7
Command Keystroke Icon Menu Result
Undo
U
(Don't use 'Undo' for now)
Edit > Undo Undoes the last
command.
8
Command Keystroke Icon Menu Result
Trim TRIM / TR
Modify > Trim Trims objects to a selected cutting edge.
9
Command Keystroke Icon Menu Result
Extend EXTEND / EX
Modify > Extend Extends objects to a selected boundary edge.
10
Command Keystroke Icon Menu Result
Offset OFFSET / O
Modify > Offset Offsets an object (parallel) by a set distance.
11
Command Keystroke Icon Menu Result
Move Move / M
Modify > Move Moves an object or objects
12
Command Keystroke Icon Menu Result
Copy Copy / CP
Modify > Copy Copies object(s) once or multiple times
13
Command Keystroke Icon Menu Result
Stretch Stretch / S
Modify > Stretch
Stretches an object after you have selected a portion of it
14
Command Keystroke Icon Menu Result
Mirror Mirror / MI
Modify > Mirror
Creates a mirror image of an object or selection set
15
Command Keystroke Icon Menu Result
Rotate Rotate / RO
Modify > Rotate Rotates objects to a certain angle
16
Command Keystroke Icon Menu Result
Fillet Fillet / F
Modify > Fillet Creates a round corner between two lines
17
18
Command Keystroke Icon Menu Result
Chamfer Chamfer / CHA
Modify > Chamfer
Creates an angled corner between two lines
Related Documents
