Top Banner
INTRODUCTION TO
55

INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Dec 18, 2015

Download

Documents

Evan Chandler
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

INTRODUCTION

TO

Page 2: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

• A metallic apparatus for sending and receiving electromagnetic waves.

• A usually metallic device (as a rod or wire) for radiating or receiving radio waves.

• A transitional structure between free-space and a guiding structure.

What is an antenna?

Page 3: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Prominent Definition Of an Antenna

The antenna can be defined as,

“A truncated transmission line with output impedance equal to the impedance of the

free space i.e. 377 Ω”

Page 4: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

EQUIVALENT CIRCUIT OF A TRANSMISSION ANTENNA

INPUT IMPEDANCE:

“The ratio of voltage to current at pair of terminals”

Antenna resistance consists of two components: Rr = Radiation Resistance

RL = Loss resistance i.e. ohmic resistance

What is the radiation resistance?The antennas appear to the transmission line as a

resistance Rr called as radiation resistance.

What does the reactance part indicate?The reactance part of this impedance represents power

temporarily stored by the antenna.

Page 5: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

MAJOR TYPES OF ANTENNAE

• Wire antennas

• Aperture antennas

• Reflector antennas

• Patch antennas

Page 6: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Antenna type Space Power Applications

Wire Large Large AM , FM broadcast(Low

frequency antenna)

Reflector Medium Large Satellite, TV Antennae

Horn( Aperture Antenna)

Small Large Large range antennae , used

for satellites

Patch Very small Reduced Receiving Antennae, used

for bluetooth, wi-fi etc.

Page 7: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

BEAM - WIDTH

HPBW :

“The angle between the two directions in which the radiation intensity is one half the maximum value of the beam”

FNBW:

“The angle between first nulls”

Page 8: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

BAND - WIDTH

The range of frequencies within which the performance of antenna with respect to some characteristics conforms to a specified standard.

Broadband antennas :-

Narrowband antennas :-

F BROADBAND=F H F L

F NARROWBAND=F H −F L FC

∗100

Page 9: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Polarisation

“The property of an electromagnetic wave describing the time varying direction and relative magnitude of the electric field vector”.

Types of polarization : Linear (horizontal or vertical)

Circular (right hand polarization or the left hand polarization)

A left hand circular polarized wave is one in which the wave rotates counter-clockwise whereas right hand circular polarized wave exhibits clockwise motion as shown in Figure (d).

Page 10: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Linearly polarized waveIf the path of the electric field vector is back and forth along a

line, it is said to be linearly polarized.

Page 11: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Circularly Polarized WaveIn a circularly polarized wave, the electric field vector remains constant in length but

rotates around in a circular path.

Page 12: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Antenna aperture

The area or part of the antenna which extracts power from the wave, that is, which actually comes in contact of EMW falling on it.

The total power is extracted from a passing wave being proportional to the aperture or area of its mouth.

Antenna efficiency :

Eap =

Page 13: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Directivity“ The property of radiating more strongly in some directions than in

others is called the directivity of the antenna”

It can also be called as the ratio of the maximum power density to its average value over a sphere as observed in the far field of an antenna.

where,U is the radiation intensity of the antenna;

UI is the radiation intensity of an isotropic source;

P is the total power radiated.

DIRECTIVITY =

Page 14: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

GAIN

“ The gain of an antenna is an actual or realized quantity which is less than the directivity”

Gain can be measured by comparing the maximum power density of the antenna of known gain.

Thus,

GAIN =

GAIN = 4

Page 15: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Wire Antennae

• Dipole

• Monopole

• Yagi-Uda

• Helix

Page 16: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Hertz antenna or a half-wave dipole antenna :

“An antenna having a physical length that is one-

half wavelength of the applied frequency”

Hertz antennas are not found at frequencies below 2MHz

A Dipole Antenna

Page 17: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

17

A Dipole Antenna

Dipole Antenna

The dipole antenna is connected to an alternating AC voltage source which causes current to flow from one side of the antenna to the other.

When the cycle is completed, direction of current reverses.

Page 18: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

18

Dipole antenna

ForceField

Imbalance of electrons create a force field i.e. an electromagnetic (EM) wave.

EM wave consists of :

Electric field E(volts/meter),

Magnetic field H (amps/meter).

Page 19: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

19

Dipole antenna

ForceField

The E produced by antenna is equal to the ratio of the difference in voltage potential of the legs of the antenna to the distance in meters between the ends.

A displacement current is present along with the E field and is a function of the capacitive reactance between the legs of the antenna.

This displacement current creates an inductive (i.e., magnetic) H field in amps/m which is at right angles to the E field.

Page 20: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

20

Dipole antenna

ForceField

The electromagnetic force field (EM wave) moves or radiates away from the antenna.

This is similar to a wave created by dropping a stone into water.

The power in the field decreases as the square of the distance from the antenna.

Page 21: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Radiation Pattern of a dipole antenna

C:\4nec2\models\zz_EZnec\v3.0\Dipole1.nec

Page 22: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Monopole Vertical (Marconi)

Antenna

Vertical Antennas are used for frequencies under 2 MHz

It uses a conducting path to ground that acts as ¼ wavelength portion the antenna above the ground.

Page 23: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Evolution of monopole from dipole

Page 24: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Working of a monopole antenna

A monopole antenna is a type of radio antenna formed by replacing one half of a dipole antenna with a ground plane at right-angles to the remaining half.

If the ground plane is large enough, the monopole behaves like a dipole, as if its reflection in the ground plane formed the missing half of the dipole

Page 25: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Radiation Pattern of Monopole

C:\4nec2\models\HFsimple\_new.nec

Page 26: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.
Page 27: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.
Page 28: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Limitations of monopoles

Needs perfect ground.

Doesn’t work satisfactorily in bad weather conditions .

Doesn’t have large range.

Operate satisfactorily for low frequencies only.

Page 29: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Yagi – Uda Antenna

Page 30: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

The Yagi-Uda Antenna is a “Directional antenna”

Invented by,

1) Dr.Hidetsugu Yagi [Tohoku Imperial University ]

2)Dr. Shintaro Uda.

Yagi-Uda Antenna

Page 31: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Antenna Principles

Direct signal in one direction

Only the driving element is connected directly to the feeder

The other elements couple to the transmitter power through the local electromagnetic fields which induce currents in them.

Page 32: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

How does a Yagi - Uda antenna work ?

A Yagi-Uda antenna is a linear array of parallel dipoles.

Yagi unit consists of , 1. Driver or driven element, 2. Reflector, 3. Director.

Driven element (Dipole or Folded dipole) is energized with transmission line.

Parasite elements excite from near field coupling by the driven element.

Page 33: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Gain is related to boom length and number of directors.

Typical Gain : 5 to 15 dB (Addition of directors up to 5 or 6 provides significant increase in gain. )

Stacking (Horizontal or vertical) : To increase gain

Polarization : Linear (Horizontal or Vertical)

Yagi specifications

Page 34: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Radiation Pattern of Yagi - UdaD:\College Sat\College Sat\Antennas Section\YagiS

\144-5Yagi.nec

Page 35: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Advantages Highly Directional antenna.

Simple to build.

Low cost.

Light Weight.

High gain.

Less critical tuning.

Wider bandwidth .

Disadvantage The Yagi Antenna design is obtrusive.

Page 36: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Applications :

Television antenna set.

Amateur radio operators (HAMS) for communication.

On frequencies from short wave, through VHF/UHF and microwaves band.

Satellite Tracking.

Radar.

Page 37: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Parabolic - Dish Antennas

Page 38: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Working

High gain and sharp directivity.

Uses a parabolic reflector and feed antenna.

Feed antenna can be any antenna like dipole ,horn, helix.

Page 39: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Reflector provides high gain because like mirror of reflecting telescope.

Parabolic dish antennas are not used at lower frequencies such as VHF region because size of dish will be very large.

Gain can be limited by size of the reflector.

Polarization : Takes polarization of feed antenna.

Typical gain : 20 dB to 30 dB.

Page 40: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

40

Methods of feeding parabolic reflectors

Dual offsetFront – fed reflectors Offset reflectors Cassegrain fed

Page 41: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Advantages Highly Directional.

High gain.

Disadvantages Can not be used at VHF frequency.

Less accuracy , sometimes parabolic surfaces are rough.

Use other antenna as feed.

Highly expensive.

Page 42: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Applications

Radio , satellite T.V broadcasting.

Data communication.

Radar in UHF and SHF bands.

Earlier applications included ground-based and airborne radar and radio astronomy.

Page 43: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.
Page 44: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.
Page 45: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

This is the biggest antenna in the world

It is built into the mountain side of Arecibo Puerto Rico.

The feed antenna is suspended by steel cables strung from 300-feet towers, an array of antennas hangs above an aluminum bowl 1,000 feet in diameter that gazes into space.

This antenna is actually the most accurate

meteorite detection system known to man.

Page 46: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Helix Antennas

Page 47: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Helix Antenna

Wire is wounded in the form of HELIX.

Helix is broadband UHF and VHF antenna to provide circular polarization.

Fed by co-axial cable.

Page 48: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Working Operates in two modes :

1) Normal (Broadside),

2) Axial (End-Fire).

Helix antenna mounted over Ground plane which makes radiation unidirectional.

Page 49: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Normal Mode

Radiation is max. in direction perpendicular to axis of helix.

Polarization : nearly circular .

Dimension of helix are very small compared to wavelength.

Narrow B/W and low radiation efficiency.

Not used practically.

Page 50: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Radiation is max. in direction along axis of helix.

It is circularly polarized i.e receives signals with arbitrary polarization.

Typical gain : 10 dB.

Polarization : Circular

Frequency limit : VHF and UHF.

Axial Mode

Page 51: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Helix antenna in different modes

Page 52: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

D:\College Sat\College Sat\Antennas Section\YagiS\helix.nec

Radiation Pattern of Helix antenna in Axial mode

Page 53: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Advantages : (Axial mode) Wide Bandwidth.

Circular polarization.

Highest Directivity.

High Radiation efficiency.

Disadvantages Very Expensive

Hard to Construct.

Page 54: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

Application

Handheld satellite communication device such as radios, mobile.

Global positioning system.

For tracking in satellite communication.

Page 55: INTRODUCTION TO. A metallic apparatus for sending and receiving electromagnetic waves. A usually metallic device (as a rod or wire) for radiating or receiving.

THANK YOU!!!