Introduction Powerpoint

Specializing in Waterjet & Laser Cutting

Who is Fedtech?Custom and Contract ManufacturerWaterjet Cutting ServicesLaser Cutting ServicesIn-House Services

Welding Drilling TappingFormingFinishing

Fabrication

Machining

Sales Squad Over 50 years of combined time at

Fedtech Sales & estimating Direct contact with our customers Friendly, quick, and efficient services

Brent Erickson

John Bobrowski

Steve Sayler Nate Novak

Kris Cabak

Dave Fox, Owner

ProgrammingCNC Machinery with direct importing of filesFedtech starts with drawings provided by

virtually any method including: DXFIGESAutoCadDWG

Waterjet Cutting• Uses garnet abrasive and high-pressure water

• Can cut materials from .0005” thin to 12” thick

• No heat-affected zones (HAZ) when cutting

• Eliminates burr

• Near-net shapes

Waterjet MaterialsWaterjet can cut

through:CopperBrassTitaniumWoodAcrylicPlasticSilicone

These are materials laser can’t safely cut through

Laser Cutting

• Laser cutting uses a beam of light to process thin materials

• Such as stainless steels, carbon steels, and steel alloys

• Processes materials up to 5/8” thick

Laser MaterialsStainless steels

15-517-4301-317And more

AluminumCarbon SteelsIncludes full CAD/CAM capabilities

Virtual TourTake a Fedtech

Fedtech Laser Bay• Bystronic Bystar 4020

• 1,969 inches per min.

• 157” x 79” work table

• Material automation

• Automated shuttle table system

• Tolerances of +/-.0012

• Holds up to 3500

pounds of material

Fedtech Laser Bay• Bystronic Byspeed 3015

• 670 inches per min.

• 120” x 60” work table

• Total engineering capability

• Tolerance of +/-.003”

Waterjet Bay 1• 12 work cells• 30" x 30" x 6“• 30" x 30" x 6“• 168" x 144" x 6“• 48" x 120" x 12“• 48" x 136" x 12“• 48" x 136" x 12“• 96" x 144" x 12“• 96" x 144" x 12“• 48" x 136" x 12“• 48" x 136" x 12“• 48" x 136" x 12“• 156" x 360" x 12"

Waterjet Bay 2• Wardjet Table • 156” x 360” table• 60,000 psi • Cutting accuracies of +/-.010”

Fedtech’s InventoryIn-House Inventory • Stainless Steels• Aluminum • Carbon SteelsProduction Floor• 50,000 square feet• 70+ employees • Est. 1996Facilities Recap• 12 waterjet work cells• 3 laser work cells • Secondary operations

Secondary Operations• Welding • Drilling• Tapping• Forming• Finishing• Countersinking• Assembly

& Machining Methods

Inspection & Quality

Tony ChullaQuality

Assurance

• ISO 9001:2000 certified• Quality management • Digital height gauge• 48” x 48” Virtek laser inspection machine• 60” DRO Calipers• 24” DRO Calipers

Shipping & Receiving• Worldwide shipping• Same-day shipping• Closely linked with our sales team to ensure quick and accurate communication

Capacity for EverythingVast array of contacts with a variety of

capabilities not provided at Fedtech, such as:

Painting & Coating Certain Machining Techniques Ultra-Sonic Testing/Inspection as needed Types of Forming & Rolling Stress Relief Heat Treating Laser Etching & Engraving Blasting & Plating

Thanks for Visiting!Request for Quotes (RFQ’s)

can be sent either to [email protected] or submitted online at our website (www.fedtech.com).

Or, you can give us a call at

763-784-4600 to reach a member of our sales team.