Introduction of jinhong termite protection barrier

Introduction of Jinhong Termite Protection Barrier

Clyde Freeman

Jinhong Australia PTY LTD

at

AGSERV PESTECH 2015

Jinhong Australia Pty Ltd

• Jinhong Australia Pty Ltd is an Australian based subsidiary of the major international company Jinhong China which has expertise in a variety of plastic technologies, including a number of established termite protection sheet barriers with established market share in Australia.

• Address: Suite 40, L2, 89-97 Jones Street, Ultimo, NSW 2007

• ABN: 36 163 906 241

Jinhong China

Jinhong China / Manufacturing Plant

Introduction of Jinhong People

Mr. Jinhong Wu

Senior Engineer ; Owner of Jinhong China; Chairman of Jinhong Australia P/L; Established Jinhong China 30 years ago, with an advanced expertise in design and manufacture of geosynthetic materials over 25 years.

Introduction of Jinhong People Dr. Jiasi Wang, Technical Director;

B.S. Beijing Normal University; M.S. The University of Tokyo;

Ph. D. University of Hawaii at Manoa major in Urban Entomology;

Post Doctor The University of Mississippi at Oxford;

Study termite behavior and ecology at Kochi University Japan for 3 years as Research Scientist;

Study termite with Acoustic method at The University of Mississippi at Oxford as Research Scientist for 2 years ;

Worked for Ensystex Inc. as supplier manager and technical representative in Japan and China for 9 years.

Introduction of Jinhong People Mr. Jack Wu, Sales Manager; Information Engineering, Xi’an Jiaotong University, China; MSc Digital Communications Systems, Loughborough University, United Kingdom; As a sale manager in Jiangsu Jinhong Geosynthetics since Jan 2010; Has extensive experience in Geosynthetics Manufacture, Production control, Quality control and Construction application. His acknowledge covers Non-Woven fabrics, Plastic Membrane, DPC, Geogrid and Composite Materials and Termite Protection Barriers.

Introduction of Jinhong People Mr. Clyde Freeman, Technical Representative;

10 years of employment in the development, CodeMark certification and supply of physical termite barrier management products;

With a broad range of experience on difficult work sites;

Has been involved in construction related industries at management level since entering the work force in 1973.

Cert III Carpentry & Joinery

Cert IV Building

Cert IV Training & Assessment

Jinhong Australia launched its product, Jinhong Termite Protection Barrier at AEPMA in August 2014

Introduction of Jinhong Termite Protection Barrier

Jinhong Australia Launched Jinhong Termite Protection Barrier at the AEPMA conference in August 2014.

APVMA Reg No.: 69617/61255

The products are Q/A manufactured to CodeMark & Australian Standards. The barrier receives strict independent analysis and inspection before exportation.

Its durability is 50 years which reflects the life expectancy requirements of the ABCB.

Introduction of Jinhong Termite Protection Barrier

The product has been tested in field for demonstrating its efficacy to block subterranean termites.

• TRIAL REPORT • Field trial to test Jinhong Termite

Blanket (2g/kg deltamethrin) against various subterranean termite species in tropical Australia

• PROJECT: Jinhong Termite Blanket CodeMark certification

• AUTHOR: Warwick Madden B.Sc.Agr. • LOCATION: Townsville, QLD • DATE OF STUDY No: JHA01/14 • REPORT: 6 August2014 • AIM: To investigate the effectiveness of

Jinhong Termite Blanket against various subterranean termite species in tropical Australia to provide data for Codemark certification.

Introduction of Jinhong Termite Protection Barrier

Efficacy test site in Townsville

Introduction of Jinhong Termite Protection Barrier

The product has been tested in field to demonstrating its efficacy to block subterranean termites.

• SUMMARY

• Jinhong Termite Blanket was tested at two sites near Townsville in north Queensland. Pits were excavated in areas of high termite activity and susceptible timbers placed. Samples of Jinhong Termite Blanket (2g/kg deltamethrin) wrapped around susceptible timber were placed on top of the timbers in the pits. Samples of Other product (5g/kg deltamethrin) were placed in the pit as a standard product. Samples of Jinhong Termite Blanket containing no active ingredient were also installed to act as untreated controls. Timbers were placed on top of the samples (six replicated per pit) and the earth replaced.

• After three months the pits were opened and inspected. Extensive damage to the feeder timbers by subterranean termites (Coptotermes acinaciformis, Heterotermes, Schedorhinotermes) had occurred. On inspection of the samples almost all untreated controls had been extensively mudded indicating a lack of repellency. However no Jinhong product had been mudded. Some mudding had occurred to two of the other samples.

• The results indicate that the active ingredient in the Jinhong product is working to repel termites and protect the timbers inside from damage in the long term.

Introduction of Jinhong Termite Protection Barrier

Installation Manual

Introduction of Jinhong Termite Protection Barrier

Brochure for Installer

Introduction of Jinhong Termite Protection Barrier

Brochure for homeowner

Introduction of Jinhong Termite Protection Barrier

Brochure for homeowner

Introduction of Jinhong Termite Protection Barrier

Jinhong Termite Protection Barrier has been CodeMark certified by Sai Global

Introduction of Jinhong Termite Protection Barrier

Jinhong Termite Protection Barrier passed AS/NZS 2904 : 1995 DPC & Flashing test carried out by CSIRO. Eng

Introduction of Jinhong Termite Protection Barrier

Jinhong Termite Protection Barrier has Public Liability Insurance

Introduction of Jinhong Termite Protection Barrier

Warranty for Jinhong Termite Protection Barrier 50 Year Warranty

Introduction of Jinhong Termite Protection Barrier

Specifications Accessories

Introduction of Jinhong Termite Protection Barrier

Specifications Accessories

Introduction of Jinhong Termite Protection Barrier

Application on construction site

Introduction of Jinhong Termite Protection Barrier

Application on construction site Flexibility

Introduction of Jinhong Termite Protection Barrier

Issues caused by the currently used physical termite protection barriers

Wicking Itching sensation

• Some brands of termite protection barrier have a wicking problem because the middle fibre layer of the product is too thick.

• Allowing the water transfer by siphon action.

• The reason for the itching problem to people with sensitive skin is that the crystals of AI (Deltamethrin) can come out from the middle layer of the product.

• The edge of the barriers are is not sealed when cut.

JINHONG TPB PLUS

The Leading Edge

• OH&S (overall roll weight reduction)

• Durability (increased strength top & bottom layer)

• Thickness reduction (reducing joins & the chance of damage by following trades)

• Two in One Capabilities DPC Approval AS/NZS 4347

Advanced Laminating

• Reduction in skin Sensitivity

• Continuous edge seal

• Eliminate (wicking)

Jinhong has resolved these issues by

Reducing the middle layer thickness of the product

• To resolve wicking issue

Comparison for wicking issue between current product and new product

Two hours later Twelve hours later

Jinhong has resolved those issues by

Sealing the edge of the product JH TPB Plus

• Advances in the laminating process to prevent the crystals of AI escaping from the middle layer.

• Resolving the itching problem of installers with sensitive skin when installing the barrier.

The modified new product is coming soon!

Thank you for your attention!