UAB OH&S Chemical Safety Training CS 101 OHS_CS101 Chemical Safety Page 1 Last Updated: 04/02/2015 Course Training Material Introduction This training is for all laboratory workers who handle chemicals during the course of their work at UAB. The regulatory agencies require this training as a part of your Right-to-Understand. Renewal is every two years or when regulations change significantly. This PDF file is divided into sections. 1. This section covers what you must do in order to stay safe and protect your health as well as those who work around you. 2. The material in the Appendix contains general knowledge – regulators, regulations, procedures, etc. This will be included on the assessment. We expect you to have a thorough working knowledge of the materials covered in the Appendix if you are a supervisor or manager of a lab, a Principal Investigator (PI), or a researcher. After reviewing this document, you will be asked to respond to real life situations in the next section. This is NOT the assessment, but the assessment will be based on the scenarios. Hazardous Chemicals OSHA’s definition of a hazardous chemical is “…any chemical which is a physical or health hazard.” This classification is based on the way the chemicals affect our safety or health. Physical Hazards Combustible Compressed Gas Explosive Flammable Pyrophoric Reactive Health Hazards Carcinogens Corrosives Hepatotoxins Irritants Nephrotoxins Reproductive toxins Sensitizers
20
Embed
Introduction - · PDF fileAfter reviewing this document, ... Explosive chemicals are those designed and produced for use as an explosive ... Peroxides and Peroxide Forming Chemicals
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
UAB OH&S Chemical Safety Training CS 101
OHS_CS101 Chemical Safety Page 1 Last Updated: 04/02/2015 Course Training Material
Introduction This training is for all laboratory workers who handle chemicals during the course of their work at
UAB. The regulatory agencies require this training as a part of your Right-to-Understand. Renewal is
every two years or when regulations change significantly.
This PDF file is divided into sections.
1. This section covers what you must do in order to stay safe and protect your health as well as
those who work around you.
2. The material in the Appendix contains general knowledge – regulators, regulations,
procedures, etc. This will be included on the assessment.
We expect you to have a thorough working knowledge of the materials covered in the Appendix if you
are a supervisor or manager of a lab, a Principal Investigator (PI), or a researcher.
After reviewing this document, you will be asked to respond to real life situations in the next section.
This is NOT the assessment, but the assessment will be based on the scenarios.
Hazardous Chemicals
OSHA’s definition of a hazardous chemical is “…any chemical which is a physical or health hazard.”
This classification is based on the way the chemicals affect our safety or health.
OHS_CS101 Chemical Safety Page 4 Last Updated: 04/02/2015 Course Training Material
1. Explosive chemicals are those designed and produced for use as an explosive (e.g., TNT,
explosive bolts, bullets, blasting caps, and fireworks).
2. Potentially explosive chemicals (PECs) are those that, over time, can oxidize, decompose,
polymerize, become contaminated, dry out or destabilize and subsequently become explosive
when subjected to heat, light, friction or mechanical shock. Examples include: diethyl ether,
tetrahydrofuran, sodium amide, and picric acid.
Peroxides and Peroxide Forming Chemicals
Peroxides are a class of chemicals with unusual stability and are one of the most dangerous classes of
chemicals used in laboratories. Some common compounds form explosive peroxides during storage.
This process is catalyzed by light and heat. Common classes of compounds that form peroxides include:
ethers, aldehydes, acetals, etc. Shock, heat or friction may cause unexpected explosion of peroxide
forming chemicals. Since peroxide crystals can form on the lid and detonate when the lid is twisted, it is
advised not to open a container if you suspect the formation of peroxides.
Hazard Control
1. Limit the number of containers of peroxide formers stored in the lab.
2. Ensure that the following is on the label:
• Warning “PEROXIDE FORMER,”
• Date of purchase,
• Date of opening, and
• Required discard date.
3. Store in airtight containers away from heat and light.
4. Look for signs of peroxide formation (e.g., crystallization, discoloration, stratification, etc.).
5. Test all opened containers of such materials every three months for peroxides. Obtain test
strips from laboratory and/or safety supply vendors.
6. Dispose the containers before the expiration date.
UAB OH&S Chemical Safety Training CS 101
OHS_CS101 Chemical Safety Page 5 Last Updated: 04/02/2015 Course Training Material
Pyrophoric Chemicals
Pyrophoric chemicals have the potential to spontaneously ignite in air. Examples include metal hydrides
finely divided metal powders, nonmetal hydrides and alkyl compounds, white phosphorus, alloys of
reactive materials and organometallic compounds. Improper use of these materials can cause lab fires,
damage to equipment, injury and even death. Pyrophoric chemicals should be stored under inert gas or
under kerosene as appropriate.
Hazard Control
• Use safer chemical alternatives, if possible.
• Limit the amount purchased.
• Do not accumulate unneeded pyrophoric reagents.
• Read the relevant SDS and safety bulletins BEFORE working with pyrophoric reagents.
• Prepare an SOP for each process involving pyrophoric chemicals.
• Complete and document all training necessary.
• Avoid wearing synthetic clothing while working with pyrophorics.
• Wear a lab coat made of 100% cotton treated with fire retardant material along with nitrile gloves
and chemical splash goggles when working with pyrophoric chemicals.
• Work with another person when working with pyrophorics. Never work alone when working
with pyrophoric chemicals.
The Chemical Safety and Waste Management manual has a more complete list of peroxide formers. Also, see the PDF file Suggested Storage for Peroxides on the OH&S website.
For more information, see the PDF file Safe Use of Pyrophoric/Water Reactive Materials on the OH&S website.
OHS_CS101 Chemical Safety Page 7 Last Updated: 04/02/2015 Course Training Material
All persons, including visitors, who enter areas where hazardous chemicals are used or stored, must
wear Personal Protective Equipment (PPE). You should know where it is stored and how to
properly dispose of, maintain, or clean the PPE. This is the “last line of defense” against potential
exposures. It is never a substitute for engineering controls and prudent work practices.
PPE must be kept inside the work area. All protective wear (lab coats, gloves, etc.) used in the lab
should be kept inside the lab to minimize the possibility of spreading contaminants to public areas
including eating or office space.
Skin Protection
Lab coats:
• Provide protection of skin and personal clothing from incidental contact.
• Prevent the spread of contamination outside of the work area (provided they are not worn
outside the work area).
• Provide a removable barrier in the event of an incident involving a spill or splash of
hazardous substances.
• Are designed in lots of different types and styles, like gloves. The selection must match the
type of hazard present in the lab.
• Must be clean, buttoned, and long sleeved to provide limited protection from chemical
splashes.
• Must flame retardant material (FR) when handling pyrophoric materials.
• Must be of 100% cotton treated with flame retardant material if the lab has more than 10
gallons of flammable materials stored outside a flammable cabinet.
• Must never be worn outside the work area. This includes never wearing them home and
washing them. A laundering company provides this service for UAB and its employees.
Minimize the Risk with PPE
UAB OH&S Chemical Safety Training CS 101
OHS_CS101 Chemical Safety Page 8 Last Updated: 04/02/2015 Course Training Material
Impervious clothing:
• Wear an impervious apron and sleeves for more protection if needed.
• Wear a closed front, impervious gown with the sleeves tucked into the gloves when
working with highly toxic substances,
Hand Protection
• Choose the appropriate glove. No one type of glove protects against all types of
chemicals. Gloves have different chemical resistances and breakthrough time based on
thickness and the materials that they are made from. When selecting the appropriate glove
(page 6 in the PDF file), consider the following:
o SDS Recommendation.
o breakthrough time.
• Always check gloves for holes and tears before use.
• Change disposable gloves as soon as they become contaminated.
• Wash hands with soap and water before leaving the lab or after finishing the experiment.
• Remember nitrile gloves are generally safe for most of the chemicals.
Eye Protection
• Use safety glasses whenever there is a chance of solid objects striking the eye. They are not
appropriate protection from chemical splash.
• Wear splash goggles when working with liquids.
• Wear a face shield with splash goggles when the splash hazard is high or the chemicals are
particularly dangerous.
Please note that some newer models protect against both splashes and flying objects. However, before donning the glasses/goggles, make sure that you are wearing the appropriate one for the job. Remember safety glasses DO NOT provide protection from chemical splashes.
OHS_CS101 Chemical Safety Page 11 Last Updated: 04/02/2015 Course Training Material
Xylene Irritant and Flammable!
Toxic to blood, kidneys, nervous system, liver
Date Transferred 06/30/2014
Secondary Containers and Labeling
Secondary containers (e.g., squeeze bottles, spray bottles, flasks, tubes, etc.) must be labeled with
information consistent with GHS requirements by June 2016.
The label on the secondary container must include:
• the exact same name as the original container, and
• all hazard class and target organ information as listed on
the original container
Use ChemWatch to print new labels if you prefer.
Safety Data Sheets (SDS)
Federal law requires that Safety Data Sheets (formerly known as Material Data Sheets or MSDS) be sent
with, or before, all hazardous chemicals the first time they are ordered by a facility. SDS must be
available to all employees at the workplace. Employees are required to review the SDS before starting
to work with any chemicals.
UAB has subscribed to the ChemWatch chemical database to make SDS available to all employees, and it
is accessible from any computer on the UAB campus, within UAB Medical system, or connected via VPN.
The Chemical Inventory
Know what hazards are present in your lab or area. To do this, review your chemical inventory once
every six months. In order to assist you, The Department of Occupational Health and Safety has
implemented a campus-wide electronic chemical inventory system. The system utilizes barcodes
and a web-based interface. This will allow chemical users to track chemicals on-hand and to keep an
up-to-date inventory.
Contact the Department of Occupational Health and Safety if you need assistance in obtaining Safety Data Sheets (SDS) or review the ChemWatch Database How To job aid.
OHS_CS101 Chemical Safety Page 15 Last Updated: 04/02/2015 Course Training Material
Emergencies
When an emergency occurs:
In Hospital Locations
1. Dial 4-0001.
2. State your name.
3. Give the person a telephone number where you are located.
4. Inform the person about your location - the building name and room number.
In a Non-Hospital Area
1. Call UAB Police – 911 on campus phones or 934-3535 on a cell phone.
2. Report the nature of the emergency.
3. Give the location of the emergency.
4. State where you will meet the emergency vehicle.
5. State how many persons are involved.
6. Tell them the type and severity of any observed injuries.
7. Notify others in the area about the nature of the emergency.
8. Meet the ambulance or fire crews at the place you indicated. Send someone else if you cannot go.
9. Do not move any injured persons unless they are in danger.
10. Keep them warm. Unnecessary movement can severely complicate neck injuries and fractures.
Emergencies Procedures
UAB OH&S Chemical Safety Training CS 101
OHS_CS101 Chemical Safety Page 16 Last Updated: 04/02/2015 Course Training Material
Injuries
During regular work hours:
• have the supervisor or lab manager fill out an Initial Medical Evaluation Authorization
• send the injured employee to
The Workplace
(205) 933-5300
1201 11th Ave. South Suite 100
Birmingham, AL 35205
If Chemicals Have Been Spilled
If chemicals have been spilled on someone:
1. Remove the contaminated clothing and get the individual under a safety shower or spigot to
wash the affected area thoroughly
2. If they have chemicals in their eyes:
a. irrigate with plenty of water for at least 15 minutes
b. check for and remove contact lenses before irrigation
If Hazardous Chemicals Have Been Ingested
If hazardous chemicals are ingested:
1. try to identify the substances involved.
2. notify medical staff or the local poison control center at 4-4606.
3. never attempt to give anything by mouth to an unconscious person.
4. complete an Accident Report as soon as possible after the incident occurred.
Contact lenses may be difficult to remove, and the irrigation must not be delayed.
UAB OH&S Chemical Safety Training CS 101
OHS_CS101 Chemical Safety Page 17 Last Updated: 04/02/2015 Course Training Material
Conclusion
This concludes this portion of the Chemical Safety (CS 101) Training Course. Renewal is every two
years or when regulations change significantly.
In the next section of this course, you will be asked to respond to real life situations. This is NOT the
assessment, but the assessment will be based on these scenarios. Answer carefully and quickly.
Take the assessment after you have completed the reality check. You must score 90% or higher to pass.
You are allowed to take the assessment three (3) times. If you fail all three (3) attempts, it will be
recorded on your transcript as a failed course and will not be removed. You will then have to re-enroll
in the course.
The Assessment
Reality Check
An Accident/Injury Report Form should be completed and a copy forwarded to the Department of Risk Management.
For more information about handling emergencies and/or injuries, visit the On-The-Job Injury/Illness Program website. There is also a PDF file on Emergencies on the OH&S website.
If you have difficulty answering the scenario questions, print this PDF file, and
review it for the answers. All of the answers are contained in this content.
OHS_CS101 Chemical Safety Page 18 Last Updated: 04/02/2015 Course Training Material
APPENDIX
SECTION 1: Regulatory Overview
This training is based on regulations from the Federal and State government as well as local entities.
Chemicals and the disposal of them are highly regulated by the following agencies.
United States Department of Transportation (U.S. D.O.T)
• Governs what may be transported and how it must be packaged and marked
• Regulates the transportation of hazardous materials on public roadways
• Sets standards for shipping labels and containers as well as standards for carriers
United States Environmental Protection Agency (U.S. E.P.A)
• Regulates the way hazardous materials and wastes are disposed of under the Resource
Conservation and Recovery Act (RCRA)
• Has requirements covering the storage of certain hazardous materials under the
Emergency Planning and Community Right-To-Know Act (EPCRA)
Occupational Safety and Health Administration (OSHA)
• As a State Institution, UAB follows, but is not regulated by, the Occupational Safety and
Health Administration (OSHA) guidelines for hazard communication, and laboratory
safety. However, UAB is regulated by all of the others.
Alabama Department of Environmental Management (ADEM)
• Regulates the way hazardous materials and wastes are disposed of under the Resource
Conservation and Recovery Act (RCRA)
Jefferson Community Commission (JeffCo)
• Regulates the disposal of wastes through the sewer system
UAB OH&S Chemical Safety Training CS 101
OHS_CS101 Chemical Safety Page 19 Last Updated: 04/02/2015 Course Training Material
SECTION 2: UAB’s Occupational Health and Safety (OH&S) Program
Audits
The Department of Occupational Health and Safety (OH&S), conducts random and required audits
based on regulatory requirements and the potential for exposure.
Audits are to check:
• general safety and housekeeping problems
• environmental and personnel monitoring for exposure to hazardous chemicals
• proper chemical and waste handling
SECTION 3: The Laboratory Standard and Lab Requirements
The Laboratory Standard
While OSHA does not regulate the UAB OH&S Program, they do require that each laboratory
follow OSHA Laboratory Standard. As a part of The Laboratory Standard, each lab must have the
following.
1. Its own Chemical Hygiene Plan (CHP)
Each lab must have a written Chemical Hygiene Plan (CHP) available to all employees
working in the area. It should be specific to the individual lab or research group and
addresses certain required areas . The CHP should:
• include standard operating procedures for handling highly hazardous
substances
• address emergency response procedures
• ensure fume hoods and other emergency equipment are functioning properly
• include criteria for the use of personal protective equipment and other control
measures as well as methods to ensure their proper functioning.
UAB OH&S Chemical Safety Training CS 101
OHS_CS101 Chemical Safety Page 20 Last Updated: 04/02/2015 Course Training Material
• contain provisions for employee training, medical consultation, or evaluation
• provide information for additional protection for working with particularly
hazardous substances
• designation of an individual responsible for implementing CHP
• review and evaluation of CHP
For a sample CHP, visit the OH&S website.
2. An appointed Chemical Hygiene Officer (CHO), also known as a Lab Coordinator
Department heads or Principal Investigators (PIs) appoint Lab Coordinators (CHOs).
They are responsible for:
• implementing and updating the Chemical Hygiene Plans
• ensuring that the laboratories they oversee have accurate and up-to-date
chemical inventories
• conducting, arranging, and keeping up-to-date training records
• ensuring compliance with the Chemical Hygiene Plan (CHP)
• serving as the liaison with OH&S
• administering the Chemical Hygiene Plan (CHP)
o This includes provisions for obtaining prior approval of especially
dangerous procedures.
Occupational Exposure to Hazardous Chemicals in Laboratories, or OSHA’s Lab Standard was written specifically to address chemical handling in the research setting. UAB follows the OSHA Lab Standard, but OSHA has no regulatory authority over UAB.