• Combats roll degradation typically found in corrosive and abrasive environments • Longer lasting rolls reduces conveyor downtime • Lighter weight rolls – “Field Friendly” for maintenance and installation personnel • Prolongs belt life by reducing material build-up www.syntronmh.com Introducing Composite Idler Rolls Composite Idler Roll Advantages • Excellent Strength • Lighter Weight • Superior Toughness • High Corrosion Resistance • High Abrasion Resistance • Reduced Material Build-Up • Low Coefficient of Thermal Expansion • Environmentally Friendly Made in U.S.A. Composite Idler Rolls are Ideal for replacement of steel rolls in corrosive environments. Dimensional specifications match our CEMA C, D and E series steel products. www.m4ts.cl
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
• Combats roll degradation typicallyfound in corrosive and abrasiveenvironments
• Longer lasting rolls reduces conveyordowntime
• Lighter weight rolls – “Field Friendly”for maintenance and installationpersonnel
• Prolongs belt life by reducing materialbuild-up
www.syntronmh.com
Introducing Composite Idler RollsComposite Idler Roll Advantages• Excellent Strength
• Lighter Weight
• Superior Toughness
• High Corrosion Resistance
• High Abrasion Resistance
• Reduced Material Build-Up
• LowCoefficientofThermalExpansion
• Environmentally Friendly
Made in U.S.A.
Composite Idler Rolls are Ideal for replacement of steel rolls in corrosive environments.
Dimensional specifications match ourCEMA C, D and E series steel products.
• Syntron Material Handling introduces a revolutionarynew idler roll made with state-of-the-art glass reinforcedpolyurethane.
• This tubing is a composite material consisting of layersof high quality glass fabric saturated with a two partthermoset polyurethane resin.
• Syntron Material Handling offers a 5” and a 6” diameterx 1/4” wall tubing size suitable for CEMA C, D and E rollapplications (Syntron Material Handling C/D3500, C/D3600& E4600 Series).
• Roll lengths are available for troughing, return, picking andV-return idlers with belt widths ranging from 18” to 72”.
• Polyurethane pultruded composite tubing offers excellentmechanical properties similar to steel and superior to manytraditional plastic resin roll products. The recommendedoperating temperature range is -40°F to +200°F.
• Syntron Material Handling composite rolls are extremelyversatile and are suitable for many material handlingapplications*.
• Standard color: Traditional “Syntron Material HandlingOrange”
*Currently not suitable in combustible environments, where possiblestatic charge can cause an explosion hazard.
Features/Benefits
• Excellent StrengthComparabletensileandflexuralstrength(lengthwise)tosteel and aluminum. High strength-to-weight ratio.
• Lighter WeightMaterial verses material: 75% lighter than steel and 30%lighter than aluminum. Approximately 50% lighter thantraditional steel rolls. Easier installation, “Field Friendly” formaintenance and installation personnel, energy savings, andreduced noise.
• Superior ToughnessThis glass fabric distributes loads to prevent surfacedamage. No permanent deformities. High impact strength. Crack resistant.
• High Corrosion ResistanceSuperior resistance to a broad range of chemicals. Excellentin acid, alkali and salt spray environments. Low waterabsorption. Protective Polyurethane topcoat is suggested ifexposed to UV rays during a long term storage.
• High Abrasion ResistanceSuperior wear resistance to traditional thermoplastic resinrolls, resulting in longer shell life, longer belt life, and lessmaintenance.
• Reduced Material Build-UpPolyurethane resin resists material build-up on the surfaceof the roll, thereby prolonging belt life.
• Low Thermal Coefficient of ExpansionLowcoefficientofthermalexpansion,comparabletosteel,reducing differential expansion between shell, shaft, andthe pressed head.