INTRODUÇÃO • Fenômenos de Transporte: estuda como massa, quantidade de movimento, calor e outras formas de energia são transportadas por um meio sólido ou continuamente deformável. Mecânica dos Fluidos Transferênc ia de Calor (massa) Termodinânica Transporte de grandezas em meios continuamente deformáveis ou sólidos Define relação entre propriedades (P, T, U, H, S, V etc) para sistemas em
30
Embed
INTRODUÇÃO Fenômenos de Transporte: estuda como massa, quantidade de movimento, calor e outras formas de energia são transportadas por um meio sólido ou.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
INTRODUÇÃO
• Fenômenos de Transporte: estuda como massa, quantidade de movimento, calor e outras formas de energia são transportadas por um meio sólido ou continuamente deformável.
Mecânica dos Fluidos
Transferência de Calor (massa)
Termodinânica
Transporte de grandezas em meios continuamente deformáveis ou sólidos
Define relação entre propriedades (P, T, U, H, S, V etc) para sistemas em equilíbrio.
Pro
prie
dade
s
Ter
mod
inâm
icas
Estados de uma substânciasimples
Uma vez conhecido duas propriedadesde uma substância simples, todas as outras propriedades podem ser determinadas: densidade, energia interna, entalpia, entropia, calor específico, coeficiente de expansão, velocidade do som, etc.
• O transporte de quantidade de movimento (velocidades),
turbulência, calor (temperatura), massa (concentração) e
outras grandezas deve-se ao campo de velocidades
• Fluido é um meio que se deforma continuamente quando sujeito a uma tensão.
• Uma camada de fluido desliza sobre a outra e a razão entre a tensão aplicada e a taxa de deformação é a viscosidade do fluido
Applications of Thermal-Fluid SciencesApplications of Thermal-Fluid SciencesApplications of Thermal-Fluid SciencesApplications of Thermal-Fluid Sciences
Requer conhecimentos de Mecânica dos Fluidos, Transferência de Calor eTermodinâmica
• Módulo combinado de eletricidade e vapor; 4x16,4 MW (ind. Textil Indonésia - Tuma Turbomach)
• Ciclo combinado que oferecem calor e eletricidade para fábricas. Com um único eixo do gerador para as duas turbinas pode-se reduzir os custos da planta significativamente eliminando-se a necessidade de um gerador extra e custos civis.
Dimensions and UnitsDimensions and Units
• Primary (Fundamental)
• Dimensions: Mass (or Force), Length, Time,
Temperature
• Secondary (Derived) Dimensions
• Force (or Mass), Velocity, Pressure, Volume,
Density, Energy, etc.
UnitsUnits
• Two systems will be used heavily
1. The International System (known as the SI system from its French title -- see text).
2. The US Customary System (USCS). (also known as the inch-pound [IP] system and the English Engineering System).
SI (International System)SI (International System)
• Mass -- kilogram (kg)• Length -- meter (m)• Time -- second (s)• Temperature -- Kelvin (K)
USCSUSCS
• The English or USCS system has five applicable primary dimensions for the equation.
• Mass - pound-mass (lbm)• Length - feet (ft)• Time - second (s)• Temperature - Rankine (K)• Force - pound-force (lbf)
Force UnitsForce Units
m = 1kg
m = 32.174 lbm
F = 1N
F = 1 lbf
a = 1m/s2
a = 1ft/s2
lbf 22481.0N 1
ft 2808.3m 1
lbm 2046226.2kg 1
Advice to gain you pointsAdvice to gain you points
Write out all units in all equations to the bitterest of detail!
Example (1)Example (1)
Ns
mkg
s
mkgWb
Ns
mkg
s
mkgWa
t
t
8.6538.6536
807.9400
8.39228.3922807.9400
22
22
An object at sea level has a mass of 400 kg.
(a) Find the weight of this object on earth.
(b) Find the weight of this object on the moon where the local gravitational acceleration is one-sixth that of earth.
Example (2)Example (2)
50000/001.0
05.0/1/1000Re
3
smkg
msmmkg
The Pipe Reynolds Number, Re, is dimensionless quantity defined as:
Re = VD/
Evaluate Re for water flowing at an averaged velocity of 1 m/s and pipe with diameter of 50 mm. The transport properties of the water are: density ( 1 g/cm3 and the viscosity () is of 10-3 Ns/m2.
Whenever you work with a formula BE CONSISTENT with your units.
DO NOT MIX (cm) with (m), (g) with (kg). Always use the same unit for mass, length, time, temperature and so forth.