NOTICE - FINAL YEAR STUDETS
DRONACHARYA COLLEGE OF ENGINEERING, KHENTAWAS, GURGAON
Department of Computer Science and EngineeringFORMAT FOR
PREPARATION OF B.TECH. INTERNSHIP REPORTProject reports should be
typed neatly only on one side of the paper with 1.5 or double line
spacing on a A4 size bond paper (210 x 297 mm). The margins should
be: Left - 1.25", Right - 1", Top and Bottom - 0.75" and single
line spacing.All the pages should contain the page nos except the
front page, certificates and acknowledgement. The papers should be
of A4 size. The type of the letters should be of Times new
Roman.
Font Size:-Headings
:20
Sub- Headings:16
Contents
:12Only those project which have proper binding will be
accepted. The binding should be of Dark Green with Text in Golden
color only. Before taking the final printout, the approval of the
concerned guide(s) is mandatory and suggested corrections, if any,
must be incorporated.
Each student has to submit one copy of the project report
including the software CD which includes Project report and the
Software developed.. The project report should contain:1. Front
page with the colored LOGO.2. Company Certificate, (should contain
your name in detail, project title, dept., duration (starting date
& completion date), authorized sign)
3. Certificate from the HOD.4. Acknowledgement5. Company
profile6. Table of contents including topic and page no. 7.
Introduction of the projecta. Motivation behind the projectb.
Scopec. Theoretical and technical aspects8. Objective of the
project9. Hardware and software requirements
10. Project design
i. System design (DFD/FLOWCHART/ERD/UML Diagram/Class
diagram)ii. Detailed design(Levels of DFD, Table Description) 11.
Coding12. Testing13. Output of the project14. Future work/Scope of
Improvement15. References (List of books / websites Journals/
Research papers used )
16. CD cover with the final copy of software which will be
demonstrated at the time of viva.
INDUSTRIAL TRAINING REPORT
On
PROJECT TOPIC
Undertaken atNAME OF THE ORGANIZATION
Submitted in partial fulfillment of the requirement
for the award of the degree BACHELOR OF TECHNOLOGY
in
Computer Science and EngineeringMaharshi Dayanand University,
RohtakUnder the Guidence of Submitted By:Mr.Vijay Kumar NITISH
Kumar(12234)
(Designation)
Name of Organization
SESSION 2011-2015Dronacharya College of Engineering
Khentawas ,Farrukh Nagar,Gurgaon
CERTIFICATEThis is to certify that Industrial training report
entitled "TITLE OF PROJECT WORK" by NAME OF STUDENT (ROLL NUMBER),
at NIIT Technologies is an original work and the same has not been
submitted to any other institute for the award of any other degree.
A Presentation of the Industrial Training report was made on Title
of The Project and the suggestions as approved by the faculty were
duly incorporated. The project has been submitted in partial
fulfillment of the requirements for the degree of Bachelor of
Technology in Computer Science and Engineering of the Maharshi
Dayanand University, Rohtak, Haryana, during the academic year
2014-15.
Prof. Vishal Bharti
Head of Department (CSE)ON COMPANYS LETTER HEAD
CERTIFICATE
This is to certify that AMIT KUMAR(13454), a student of Bachelor
of Technology (Computer Science and Engineering) from Dronacharya
College of Engineering, Farrukh Nagar, Gurgaon, Affiliated to
Maharshi Dayanand University, Rohtak(Haryana), has undertaken the
Industrial Training at NIIT TECHNOLOGIES Ltd during to under my
supervision & guidance. He / She has completed his/her
Industrial Training & completed the Project on .Seal of the
Organization
Signature of GuideDate
Name of the Guide
(Designation)Acknowledgement
I take this opportunity to express a deep sense of gratitude to
Company Mentor Name, Designation, Company Name, for his/her cordial
support, valuable information and guidance, which helped me in
completing this task through various stages.
I am also obliged to staff members of (Company Name), for the
valuable information provided by them in their respective fields. I
am grateful for their cooperation during the period of my
Industrial Training.
I would like to express my sincere gratitude to my Head of
Department Prof. Vishal Bharti for giving me the opportunity to
complete my industrial training. It would never be possible for us
to take this project to this level without his innovative ideas and
his relentless support and encouragement.
Name of Student
(Roll Number)
(CSE VIII Sem)Industrial Training Performance ReportStudents
Name: Programme:You are requested to provide your opinion on the
following parameters.OutstandingGoodSatisfactoryUnsatisfactory
ABCD
1. Technical knowledge gathered about the industry and the job
he/she was involved.
2. Communication Skills: Oral / Written / Listening skills
3. Ability to work in a team
4. Ability to take initiative
5. Ability to develop a healthy long term relationship with
client
6. Ability to relate theoretical learning to the practical
training
7. Creativity and ability to innovate with respect to work
methods & procedures
8. Ability to grasp new ideas and knowledge
9. Presentations skills10. Documentation skills
11. Sense of Responsibility12. Acceptability (patience, pleasing
manners, the ability to instill trust, etc.)
13. His/her ability and willingness to put in hard work
14. Punctuality
Any other comments .
Assessors Overall rating: Based on the above criteria he/she
secured __________ Marks/50 Marks.
Assessors Name: Designation:
Organization name and address with official seal:Email id:
Contact No:
Sample Format of the Contents