INTERNET COPY Signatures removed for security reasons Konrad Scheiber General Manager Quality Austria - Trainings, Zertifizierungs und Begutachtungs GmbH, AT-1010 Vienna, Zelinkagasse 10/3 Quality Austria - Trainings, Zertifizierungs und Begutachtungs GmbH awards this qualityaustria certificate to the following organisation: The assessment was performed in compliance with EN9104-001:2013. Certificate-Registration No.: 00015/0 This qualityaustria certificate confirms the compliance and further development of an effective 4982dd9e-14e4-4cf8- b3e3-124b3d58a2f6 INTERNET COPY Signatures removed for security reasons Quality Austria - Trainings, Zertifizierungs und Begutachtungs GmbH is accredited according to the Austrian Accreditation Act by the BMWFW (Federal Ministry of Science, Research and Economy). Quality Austria is accredited as an organisation for environmental verification by the BMLFUW (Federal Ministry of Agriculture, Forestry, Environment and Water Management). Quality Austria is authorized by the VDA (Association of the Automotive Industry). For accreditation registration details please refer to the applicable decisions or recognition documents. Quality Austria is the Austrian member of IQNet (International Certification Network). CERTIFICATE Expiry Date: 15 April 2021 Issue Date: 16 April 2018 Vienna, 16 April 2018 Gerald Perschler Specialist representative ALPEX Technologies GmbH AT-6068 Mils, Gewerbepark 38 Central Function Certification Structure: Campus Manufacturing of Tooling Systems, Jigs and milled Parts for Aerospace, Automotive and Mechanical Industries Included Sites: according to appendix page 2 / 2 Page 1 / 2 QUALITY MANAGEMENT SYSTEM complying with the requirements of standard prEN 9100:2016 incl. product design (technically equivalent to AS 9100D and JISQ 9100:2016) including the requirements of ISO 9001:2015