Page 1
S-1
Plasmon-Promoted Electrocatalytic Water Splitting on Metal-Semiconductor Nanocomposites: the Interfacial Charge Transfer and the Real Catalytic SitesLili Du, Guodong Shi, Yaran Zhao, Xiang Chen, Hongming Sun, Fangming Liu, Fangyi Cheng and Wei Xie*
Dedicated to 100th anniversary of Nankai University
Key Lab of Advanced Energy Materials Chemistry (Ministry of Education)
Renewable Energy Conversion and Storage Center,
College of Chemistry, Nankai University
Weijin Rd. 94, Tianjin 300071, China
*Correspondence: [email protected]
This PDF file includes:
Supplementary Figures S1 – S20.
Supplementary Calculations S2-S3
Supplementary Scheme S1.
Supplementary Tables S1-S4.
Electronic Supplementary Material (ESI) for Chemical Science.This journal is © The Royal Society of Chemistry 2019
Page 2
S-2
S1. Supplementary Figures
Figure S1. (a) Schematic illustration of the preparation of Au/NiCo LDH nanocomposite. SEM
images of Ni foam (b), NiCo LDH nanosheet (c-d) and Au/NiCo LDH (e). Inserts are the
corresponding optical images.
Figure S2. TEM images of the NiCo LDH.
Page 3
S-3
Figure S3. TEM image of the Au NPs. Insert shows the diameter distribution of the particles.
Figure S4. Zeta potentials of NiCo LDH (a) and Au NPs (b) dispersed in water.
Page 4
S-4
Figure S5. X-ray diffraction (XRD) patterns of NiCo LDH and Au/NiCo LDH.
Figure S6. (a) XPS spectrum of Au/NiCo LDH. High-resolution XPS spectra of Au 4f (b), Ni 2p
(c) and Co 2p (d) of Au/NiCo LDH.
Page 5
S-5
Figure S7. XRD patterns of Au/Ni(OH)2 (a) and Au/Co(OH)2 (d). SEM and TEM images of
Au/Ni(OH)2 (b & c) and Au/Co(OH)2 (e & f), respectively.
Figure S8. High-resolution XPS spectra of (a) Ni 2p and (b) Co 2p in NiCo LDH (green curve)
and Au/NiCo LDH (pink curve).
Page 6
S-6
Figure S9. Polarization curves of the corresponding electrocatalysts toward (a) OER and (b) HER.
Page 7
S-7
Figure S10. (a) Tafel plots derived from the OER polarization curves (Figure 3a) of Au/NiCo
LDH (pink), NiCo LDH (green), Au NPs (blue), and Ni foam (black) with (solid curves) and
without (dashed curves) light illumination. (b) Overpotentials of Au/NiCo LDH, NiCo LDH and
Au NPs for OER at the current density of 10 mA/cm2 with (red) and without (blue) light
illumination. (c) Tafel plots derived from the HER polarization curves (Figure 3b) of Au/NiCo
LDH (pink), NiCo LDH (green), Au NPs (blue), and Ni foam (black) with (solid curves) and
without (dashed curves) light illumination. (d) Overpotentials of Au/NiCo LDH, NiCo LDH and
Au NPs at -10 (red) and -100 mA/cm2 (blue) for HER.
Page 8
S-8
Figure S11. (a) Electrochemical impedance spectroscopy (EIS) Nyquist plots (overpotential = 250
mV) for the many different electrocatalysts with and without light illumination. (b) The equivalent
circuit model for EIS analysis.
Figure S12. (a) OER and (b) HER polarization curves of Au/NiCo LDH with different Au
contents (0%, 1.7%, 3.3%, and 5.1%). (c) Summary of the overpotentials using the Au/NiCo LDH
samples at current densities of 10 and 100 mA/cm2.
Page 9
S-9
Figure S13. (a) OER and (b) HER polarization curves of Au/NiCo LDH under illumination (red
dashed curves) and control experiment where only the working electrode is illuminated (red solid
curves) and only the counter electrode is illumination (blue curves).
Figure S14. (a) Chronopotentiometry curves at a fixed current of 10 mA/cm2 in OER for 6 h. (b)
Time dependence of the current density for Au/NiCo LDH in HER. (c) XPS survey and high-
resolution XPS spectra of Ni 2p (d), Co 2p (e) and Au 4f (f) of Au/NiCo LDH before and after the
test.
Page 10
S-10
Figure S15. (a) Experimental and theoretical amounts of H2 and O2 by the Au/NiCo LDH
electrode at a constant current density. (b) Chronopotentiometry curves of Au/NiCo LDH in
overall water splitting at a constant current density of 10 and 20 mA/cm2 by using a two-electrode
configuration.
Figure S16. SEM (a, b) and TEM (c, d) images of the Au/NiCo LDH after the overall water
splitting experiment.
Page 11
S-11
Figure S17. (a) OER polarization curves under the illumination of different lights. (b)
Chronoamperomertic i-t curves of the Au/NiCo LDH at an applied potential of 1.23 V vs. RHE
under illumination of visible light at 420, 500, 550, 600, and 700 nm with 30 s light on/off cycles.
(c) OER polarization curves in the darkness at different reaction temperatures.
Figure S18. OER polarization curves of Au/NiCo LDH and Au@SiO2/NiCo LDH under
illumination. Insert is the TEM images of Au@SiO2.
Page 12
S-12
Figure S19. (a-c) HER polarization curves of Au NPs, NiCo LDH and Au/NiCo LDH with and
without TP under the illumination; (d-f) OER polarization curves of Au NPs, NiCo LDH and
Au/NiCo LDH with and without TP under the illumination.
Figure S20. (a) UV–Vis absorption spectra of NiCo LDH. The inset shows the band gap. (b) UPS
spectrum of NiCo LDH. Insert is the high binding energy range.
Page 13
S-13
S2. Calculations of Faradaic efficiencies of photoanode and photocathode
Faraday efficiency can be calculated as following: 1,2
Faraday efficiency (photoanode) (%) =
𝑂2 (𝑚𝑒𝑎𝑠𝑢𝑟𝑒𝑑)
𝑂2 (𝑡ℎ𝑒𝑜𝑟𝑒𝑡𝑖𝑐𝑎𝑙) × 100%
Faraday efficiency (photocathode) (%) =
𝐻2 (𝑚𝑒𝑎𝑠𝑢𝑟𝑒𝑑)
𝐻2 (𝑡ℎ𝑒𝑜𝑟𝑒𝑡𝑖𝑐𝑎𝑙) × 100%
Where O2 (measured) and H2 (measured) are measured by the gas chromatography and O2
(theoretical) and H2 (theoretical) are calculated as following: 3
O2 (theoretical) = H2 (theoretical) =
𝑄 𝑛𝑜𝑥𝑦𝑔𝑒𝑛 𝐹
𝑄
𝑛ℎ𝑦𝑑𝑟𝑜𝑔𝑒𝑛 𝐹
Q is the integrated charge, noxygen is the number of electrons transferred per oxygen molecule (4 in
this case), nhydrogen is the number of electrons transferred per hydrogen molecule (2 in this case),
and F is the Faraday's constant (96485 C/mol).
As shown in Figure S15a, 0.552 mmol of O2 and 1.107 mmol of H2 are produced after 3 h of
illumination. So the Faradaic efficiencies of photoanode and photocathode are calculated as
following:
Faraday efficiency (photoanode) (%) = = 98.63%
0.552 𝑚𝑚𝑜𝑙
( 216
4 × 96485× 103 )𝑚𝑚𝑜𝑙
× 100%
Faraday efficiency (photocathode) (%) = =
1.107 𝑚𝑚𝑜𝑙
(216
2 × 96485× 103 )𝑚𝑚𝑜𝑙
× 100%
98.92%
Page 14
S-14
S3. Calculations of incident photon-to-current efficiency (IPCE) of the Au/NiCo LDH at
single wavelengths.
The IPCE is defined as the following equation: 4, 5
IPCE (%) = Where 1240 V·nm represents a
|𝑗𝑝ℎ (𝑚𝐴/𝑐𝑚2)| × 1240 𝑉·𝑛𝑚
𝑃𝑚𝑜𝑛𝑜 (𝑚𝑊/𝑐𝑚2) × 𝜆 (𝑛𝑚)× 100%
multiplication of h (Planck’s constant) and c (the speed of light), Pmono is the monochromated
illumination power intensity, and λ is the wavelength.
So the IPCE at different wavelengths can be calculated:
IPCE (420 nm) = ×100% = 0.732 %
|0.0196 𝑚𝐴/𝑐𝑚2| × 1240 𝑉·𝑛𝑚
7.9 𝑚𝑊/𝑐𝑚2 × 420 𝑛𝑚
IPCE (500 nm) = ×100% = 0.975% |0.070 𝑚𝐴/𝑐𝑚2| × 1240 𝑉·𝑛𝑚
17.8 𝑚𝑊/𝑐𝑚2 × 500 𝑛𝑚
IPCE (550 nm) = ×100% = 1.087%
|0.1075 𝑚𝐴/𝑐𝑚2| × 1240 𝑉·𝑛𝑚
22.3 𝑚𝑊/𝑐𝑚2 × 550 𝑛𝑚
IPCE (600 nm) = ×100% = 0.10% |0.0118 𝑚𝐴/𝑐𝑚2| × 1240 𝑉·𝑛𝑚
24.4 𝑚𝑊/𝑐𝑚2 × 600 𝑛𝑚
IPCE (700 nm) = ×100% = 0.0284% |0.0041 𝑚𝐴/𝑐𝑚2| × 1240 𝑉·𝑛𝑚
25.6 𝑚𝑊/𝑐𝑚2 × 700 𝑛𝑚
Page 15
S-15
S4. Supplementary scheme
Scheme S1.
HER in alkaline media:
Cat. + H2O + e- → Cat. -H* + OH- (Volmer step)
H2O + Cat. -H* + e- → H2+ Cat. + OH- (Heyrovsky step)
Where Cat. refers to catalysts and H* stands for H atoms adsorbed on surface of catalysts.
OER reaction path in alkaline electrolyte:
1) * + OH- →OH*+ e-
2) OH* + OH- →O* + H2O + e-
3) O* + OH- →OOH*+ e-
4) OOH* + OH- →* +O2 + H2O + e-
Summary OER 4OH- →O2 +2H2O+4e-
Where * stands for an active site on the surface, OH*, O*, OOH* are the adsorbed intermediates.
Step 1, 2 and 3 are reversible and determine the overall OER rate. Step 4 is the path of generating
oxygen in the end, which is fast and irreversible.
Page 16
S-16
S5. Supplementary Tables
Table S1. Summary of the electrochemical properties of the as-prepared electrodes.
Page 17
S-17
Table S2. Comparison of the OER performance between Au/NiCo LDH and other catalysts.
* stands for the values calculated from the data shown in the literatures.
Page 18
S-18
Table S3. Comparison of the HER activity between Au/NiCo LDH and other catalysts.
* stands for the values calculated from the data shown in the literatures.
Page 19
S-19
Table S4. Summary of the overall water splitting performance of Au/NiCo LDH and other
catalysts. Here V10 corresponds to the voltage to achieve a current density of 10 mA/cm2.
* stands for the values calculated from the data shown in the literature.
Page 20
S-20
Supplementary References
[S1] Brillet, J., Yum, J.-H., Cornuz, M., Hisatomi, T., Solarska, R., Augustynski, J., Graetzel, M.,
and Sivula, K. Highly Efficient Water Splitting by a Dual-absorber Tandem Cell. Nat. Photonics
2012, 6, 824-828.
[S2] Chen, H., Song, L., Ouyang, S., Wang, J., Lv, J., and Ye, J. Co and Fe Codoped WO2.72 as
Alkaline‐Solution‐Available Oxygen Evolution Reaction Catalyst to Construct Photovoltaic Water
Splitting System with Solar‐To‐Hydrogen Efficiency of 16.9%. Adv. Sci. 2019, 1900465.
[S3] Masudy-Panah, S., Eugene, Y. J. K., Khiavi, N. D., Katal, R., and Gong, X. Aluminum-
incorporated p-CuO/n-ZnO photocathode coated with nanocrystal-engineered TiO2 protective
layer for photoelectrochemical water splitting and hydrogen generation. J. Mater. Chem. A 2018, 6,
11951-11965.
[S4] Chen, Z., Jaramillo, T. F., Deutsch, T. G., Kleiman-Shwarsctein, A., Forman, A. J., Gaillard,
N., Garland, R., Takanabe, K., Heske, C., Sunkara, M., McFarland, E. W., Domen, K., Miller, E.
L., Turner, J. A., and Dinh, H. N. Accelerating materials development for photoelectrochemical
hydrogen production: Standards for methods, definitions, and reporting protocols. J. Mater. Res.,
2011, 25, 3-16.
[S5] Windle, C. D., Kumagai, H., Higash, M., Brisse, R., Bold, S., Jousselme, B., Chavarot-
Kerlidou, M., Maeda, K., Abe, R., Ishitani, O., and Artero, V. Earth-Abundant Molecular Z-
Scheme Photoelectrochemical Cell for Overall Water-Splitting. J. Am. Chem. Soc., 2019, 141,
9593-9602.
[S6] Hu, E., Feng, Y., Nai, J., Zhao, D., Hu, Y., and Lou, X. W. Construction of Hierarchical Ni-
Co-P Hollow Nanobricks with Oriented Nanosheets for Efficient Overall Water Splitting. Energy
Environ. Sci. 2018, 11, 872-880.
[S7] Anjum, M. A. R., Okyay, M. S., Kim, M., Lee, M. H., Park, N., and Lee, J. S. Bifunctional
Sulfur-Doped Cobalt Phosphide Electrocatalyst Outperforms All-Noble-Metal Electrocatalysts in
Alkaline Electrolyzer for Overall Water Splitting. Nano Energy 2018, 53, 286-295.
[S8] Du, C. F., Khang Ngoc, D., Liang, Q., Zheng, Y., Luo, Y., Zhang, J., and Yan, Q. Self-
Assemble and In Situ Formation of Ni1-xFexPS3 Nanomosaic-Decorated MXene Hybrids for
Overall Water Splitting. Adv. Energy Mater. 2018, 8, 1801127.
Page 21
S-21
[S9] Yu, L., Yang, J. F., Guan, B. Y., Lu, Y., and Lou, X. W. D. Hierarchical Hollow Nanoprisms
Based on Ultrathin Ni-Fe Layered Double Hydroxide Nanosheets with Enhanced Electrocatalytic
Activity towards Oxygen Evolution. Angew. Chem. Int. Ed. 2018, 57, 172-176.
[S10] Yu, C., Liu, Z., Han, X., Huang, H., Zhao, C., Yang, J., and Qiu, J. NiCo-Layered Double
Hydroxides Vertically Assembled on Carbon Fiber Papers as Binder-Free High-Active
Electrocatalysts for Water Oxidation. Carbon 2016, 110, 1-7.
[S11] Li, Y., Hu, L., Zheng, W., Peng, X., Liu, M., Chu, P. K., and Lee, L. Y. S. Ni/Co-based
nanosheet arrays for efficient oxygen evolution reaction. Nano Energy 2018, 52, 360-368.
[S12] Islam, M. S., Kim, M., Jin, X., Oh, S. M., Lee, N. S., Kim, H., and Hwang, S. J.
Bifunctional 2D Superlattice Electrocatalysts of Layered Double Hydroxide-Transition Metal
Dichalcogenide Active for Overall Water Splitting. Acs Energy Lett. 2018, 3, 952-960.
[S13] Wu, H., Lu, X., Zheng, G., and Ho, G. W. Topotactic Engineering of Ultrathin 2D
Nonlayered Nickel Selenides for Full Water Electrolysis. Adv. Energy Mater. 2018, 8, 1702704.
[S14] Menezes, P. W., Panda, C., Loos, S., Bunschei-Bruns, F., Walter, C., Schwarze, M., Deng,
X., Dau, H., and Driess, M. (2018). A Structurally Versatile Nickel Phosphite Acting as a Robust
Bifunctional Electrocatalyst for Overall Water Splitting. Energy Environ. Sci. 2018, 11, 1287-
1298.
[S15] Han, X., Wu, X., Deng, Y., Liu, J., Lu, J., Zhong, C., and Hu, W. Ultrafine Pt Nanoparticle-
Decorated Pyrite-Type CoS2 Nanosheet Arrays Coated on Carbon Cloth as a Bifunctional
Electrode for Overall Water Splitting. Adv. Energy Mater. 2018, 8, 1800935.
[S16] Wang, J., Zhong, H. X., Wang, Z. L., Meng, F. L., and Zhang, X. B. Integrated Three-
Dimensional Carbon Paper/Carbon Tubes/Cobalt-Sulfide Sheets as an Efficient Electrode for
Overall Water Splitting. ACS Nano 2016, 10, 2342-2348.
[S17] Liu, G., Li, P., Zhao, G., Wang, X., Kong, J., Liu, H., Zhang, H., Chang, K., Meng, X.,
Kako, T., et al. Promoting Active Species Generation by Plasmon-Induced Hot-Electron
Excitation for Efficient Electrocatalytic Oxygen Evolution. J. Am. Chem. Soc. 2016, 138, 9128-
9136.
[S18] Zhang, Y., Shao, Q., Pi, Y., Guo, J., and Huang, X. A Cost-Efficient Bifunctional Ultrathin
Nanosheets Array for Electrochemical Overall Water Splitting. Small 2017, 13, 1700355.
Page 22
S-22
[S19] Xiao, Z., Wang, Y., Huang, Y. C., Wei, Z., Dong, C. L., Ma, J., Shen, S., Li, Y., and Wang,
S. Filling the Oxygen Vacancies in Co3O4 with Phosphorus: An Ultra-Efficient Electrocatalyst for
Overall Water Splitting. Energy Environ. Sci. 2017, 10, 2563-2569.
[S20] Yu, L., Zhou, H., Sun, J., Mishra, I.K., Luo, D., Yu, F., Yu, Y., Chen, S., and Ren, Z.
Amorphous NiFe Layered Double Hydroxide Nanosheets Decorated on 3D Nickel Phosphide
Nanoarrays: A Hierarchical Core-Shell Electrocatalyst for Efficient Oxygen Evolution. J. Mater.
Chem. A 2018, 6, 13619-13623.
[S21] Zhu, Y. P., Ma, T. Y., Jaroniec, M., and Qiao, S. Z. Self-Templating Synthesis of Hollow
Co3 O4 Microtube Arrays for Highly Efficient Water Electrolysis. Angew. Chem. Int. Ed. 2017,
56, 1324-1328.
[S22] Zhang, H., Li, X., Hähnel, A., Naumann, V., Lin, C., Azimi, S., Schweizer, S. L.,
Maijenburg, A. W., and Wehrspohn, R. B. Bifunctional Heterostructure Assembly of NiFe LDH
Nanosheets on NiCoP Nanowires for Highly Efficient and Stable Overall Water Splitting. Adv.
Funct. Mater. 2018, 28, 1706847.
[S23] Shi, H., Liang, H., Ming, F., and Wang, Z. Efficient Overall Water-Splitting Electrocatalysis
Using Lepidocrocite VOOH Hollow Nanospheres. Angew. Chem. Int. Ed. 2017, 129, 588-592.
[S24] Zhang, H., An, P., Zhou, W., Guan, B. Y., Zhang, P., Dong, J., and Lou, X.W. Dynamic
Traction of Lattice-Confined Platinum Atoms into Mesoporous Carbon Matrix for Hydrogen
Evolution Reaction. Sci. Adv. 2018, 4, eaao6657.
[S25] Gao, M. Y., Yang, C., Zhang, Q. B., Zeng, J. R., Li, X. T., Hua, Y. X., Xu, C. Y., and Dong,
P. Facile Electrochemical Preparation of Self-Supported Porous Ni-Mo Alloy Microsphere Films
as Efficient Bifunctional Electrocatalysts for Water Splitting. J. Mater. Chem. A 2017, 5, 5797-
5805.
[S26] Masa, J., Weide, P., Peeters, D., Sinev, I., Xia, W., Sun, Z., Somsen, C., Muhler, M., and
Schuhmann, W. Amorphous Cobalt Boride (Co2B) as a Highly Efficient Nonprecious Catalyst for
Electrochemical Water Splitting: Oxygen and Hydrogen Evolution. Adv. Energy Mater. 2016, 6,
1502313.
[S27] Sun, H., Xu, X., Yan, Z., Chen, X., Cheng, F., Weiss, P. S., and Chen, J. Porous
Multishelled Ni2P Hollow Microspheres as an Active Electrocatalyst for Hydrogen and Oxygen
Evolution. Chem. Mater. 2017, 29, 8539-8547.
Page 23
S-23
[S28] Yu, L., Zhou, H., Sun, J., Qin, F., Luo, D., Xie, L., Yu, F., Bao, J., Li, Y., Yu, Y., et al.
Hierarchical Cu@CoFe Layered Double Hydroxide Core-Shell Nanoarchitectures as Bifunctional
Electrocatalysts for Efficient Overall Water Splitting. Nano Energy 2017, 41, 327-336.
[S29] Xiao, C., Li, Y., Lu, X., and Zhao, C. Bifunctional Porous NiFe/NiCo2O4/Ni Foam
Electrodes with Triple Hierarchy and Double Synergies for Efficient Whole Cell Water Splitting.
Adv. Funct. Mater. 2016, 26, 3515-3523.