Interchangeable Plates & Modules
Interchangeable Plates & Modules
Now introducing the new range of GridPro® frontplates and modules.
As well as a wide range of modules to choose from all of our switch
commercial applications.
The GridPro® ® installation,
® wiring accessories.
Interchangeable Plates & Modules
New Features I5
I20
I22
Modules I26
Dimmer Mounting Kits I84
Deco Plus® Frontplates I91
Guide I100
I102
Define® I108
Define® Frontplates I110
Deco® Frontplates I118
Mode® Frontplates I126
I132
I134
I140
I145
I5
...via a clipping feature & screw attachment on each module.
One Module Fits All
Ideal for isolation of
Screw attachment feature Allows the modules to be assembled onto 1 - 4 gang GridPro® frontplates
Ergonomic front mounting module Designed with a large radius on the
hand or small tool.
Ergonomic Modules
® wiring accessories. ® frontplates another
unique feature of our modules is the clip on the top and bottom
Our GridPro®
off captivated terminal screws
2 cable.
A screwdriver guide ensures the screwdriver
cable in position. The terminal screw apertures are designed to help guide the tool.
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | [email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
...for 1-4 gang GridPro® frontplates.
SCREW-INMODULES
NO YOKE
STANDARD BACK BOX
The GridPro® 1 - 4 gang GridPro® frontplates via the screw feature
®
*excluding the screwless Definity™ GridPro® frontplates, which have their own dedicated inserts.
For use with 1 - 4 gang GridPro® frontplates*...
*excluding the screwless Definity™ GridPro® frontplates, which have their own dedicated inserts.
CLIP-ONMODULES
® frontplates*...
* ™ GridPro® frontplates, which have their own dedicated inserts.
® frontplates the module can be assembled using the clip attachment, which secures
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.comCLICK® WIRING ACCESSORIESCLICK® WIRING ACCESSORIES
...on all GridPro® frontplates.
SCREW-INMODULES
NO YOKE
GridPro® frontplates have horizontal mounted screws to give a
on 1 - 4 gang
GridPro®
1-4 gang GridPro® frontplates*.
*excluding the screwless Definity™ GridPro® frontplates, which have their own dedicated inserts.
Antibacterial & Antiviral Mode®, Polar & Part M wiring accessories are
has similar inherent properties to antimicrobial additives that inhibit the growth of infectious
enveloped viruses.
Mode®, Polar & Part M plates have been
anti-viral properties against enveloped and non-enveloped viruses.
After a contact period of 4 hours, Mode®, Polar & Part M was shown to have a 99.9%
Standard
STANDARDBACK BOX
RDOX
STSTSTSTANANNANDDADAD RRRBACK BO
A unique feature of 1 - 4 gang GridPro®
because our 1 - 4 gang GridPro®
*excluding the screwless Definity™ GridPro® frontplates, which have their own dedicated inserts.
snap off tabs.
SNAP TABSFITTING INSIDE BACK BOX
WITH TABSFITTING ON
BACK BOX SURFACE
®
® plate ®
GridPro® frontplates, which have their own dedicated inserts.
CLIP-ONMODULES
3. Attach GridPro® frontplate using the 2.
1. ® and
CLICK® WIRING ACCESSORIESCLICK® WIRING ACCESSORIES
NO YOKE SCREW-INMODULES
3. Attach the GridPro® frontplate using the
1.
2. Screw each module into the GridPro® frontplate with the screws provided
into each module.
Polished Brass (BR)
Satin Chrome* (SC)
Polished Chrome (CH)
Satin Brass* (SB)
Stainless Steel (SS)
Pearl Nickel (PN)
Brushed Stainless* (BS)
I25
White (PW)
Grey (GY)
A simple code structure signifies the module colour and product finish...
All GridPro® modules featured in this brochure are available in
and stainless steel finishes are
The GridPro®
® wiring
® installation.
GridPro® Module
Product Module Product Finish
GM 2001 BK CH
Mod
ule
Fini
shes
Antique Brass* (AB)
Black Nickel (BN)
A i BBl k Ni
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.comCLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
GR
IDPR
O®
I27
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. These products are rated at 20AX; therefore all terminals should not exceed the stated amperage. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products independently tested have shown to have anti-viral properties against enveloped and non-enveloped viruses. A 99.99% kill off rate across all four types of the strains of bacteria - MRSA, E-Coli, Salmonella, Klebsiella Pneumonia and enveloped viruses and a 92% kill off rate against non-enveloped viruses.
Technical Specification
Material Composition
Voltage 250V~ 50Hz
Current Rating
Terminal Size ø 5mm
Torque Value 1.2Nm
Cable Size 2 2 2
Back Box Depth ®, Deco Plus®, Mode®, Polar ®
Modular Yes
Warranty 10 Years
Antimicrobial Certified
IP Rating IP20
Operational Temperature -5o o
Standards
DIMENSIONS
24.5
35
20
50
GridPro® ModulesG
RID
PRO
®
GM2001PWPNGM2001PW
Standards: BS EN 60669-1 Back Box Depth: Dependent On Plate Used Cable Size: 3 x 2.5mm² or 2 x 4mm² Dimensions: 24.5mm (W) x 50mm (H) x 22.5mm (D)
20AX 1 Way Switch Modules
GM2001PWGM2001BK
GM2001PWBRGM2001PWBSGM2001PWCHGM2001PWPNGM2001PWSBGM2001PWSCGM2001PWSS
GM2001PW GM2001PWPN
GM2001BKABGM2001BKBNGM2001BKBRGM2001BKBSGM2001BKCHGM2001BKPNGM2001BKSBGM2001BKSCGM2001BKSS
GM2001GYBSGM2001GYSCGM2001GYSS
GM2001PWSSGM2001PWSS
GR
IDPR
O®
I29I28
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. These products are rated at 20AX; therefore all terminals should not exceed the stated amperage. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products independently tested have shown to have anti-viral properties against enveloped and non-enveloped viruses. A 99.99% kill off rate across all four types of the strains of bacteria - MRSA, E-Coli, Salmonella, Klebsiella Pneumonia and enveloped viruses and a 92% kill off rate against non-enveloped viruses.
Material Composition
Voltage 250V~ 50Hz
Current Rating
Terminal Size ø 5mm
Torque Value 1.2Nm
Cable Size 2 2 2
Back Box Depth ®, Deco Plus®, Mode®, Polar ®
Modular Yes
Warranty 10 Years
Antimicrobial Certified
IP Rating IP20
Operational Temperature -5o o
Standards
DIMENSIONS
24.5
35
20
50
Technical Specification GridPro® Modules
Standards: BS EN 60669-1 Back Box Depth: Dependent On Plate Used Cable Size: 3 x 2.5mm² or 2 x 4mm² Dimensions: 24.5mm (W) x 50mm (H) x 22.5mm (D)
20AX 2 Way Switch Modules
GM2002PWGM2002BK
GM2002PWBRGM2002PWBSGM2002PWCHGM2002PWPNGM2002PWSBGM2002PWSCGM2002PWSS
GM2002BKABGM2002BKBNGM2002BKBRGM2002BKBSGM2002BKCHGM2002BKPNGM2002BKSBGM2002BKSCGM2002BKSS
GM2002GYBSGM2002GYSCGM2002GYSS
GR
IDPR
O®
GR
IDPR
O®
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. These products are rated at 20AX; therefore all terminals should not exceed the stated amperage. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products independently tested have shown to have anti-viral properties against enveloped and non-enveloped viruses. A 99.99% kill off rate across all four types of the strains of bacteria - MRSA, E-Coli, Salmonella, Klebsiella Pneumonia and enveloped viruses and a 92% kill off rate against non-enveloped viruses.
Material Composition
Voltage 250V~ 50Hz
Current Rating 20AX
Terminal Size ø 5mm
Torque Value 1.2Nm
Cable Size 2 2 2
Back Box Depth ®, Deco Plus®, Mode®, Polar ®
Modular Yes
Warranty 10 Years
Antimicrobial Certified
IP Rating IP20
Operational Temperature -5o o
Standards
DIMENSIONS
24.5
35
20
50
Technical SpecificationGridPro® Modules
GM2004PWSSGM2004PWPNGM2004PW GM2004PWSSGM2004PWPNGM2004PW
Standards: BS EN 60669-1 Back Box Depth: Dependent On Plate Used Cable Size: 3 x 2.5mm² or 2 x 4mm² Dimensions: 24.5mm (W) x 50mm (H) x 22.5mm (D)
20AX 2 Way Retractive Switch Modules
GM2004PWGM2004BK
GM2004PWBRGM2004PWBSGM2004PWCHGM2004PWPNGM2004PWSBGM2004PWSCGM2004PWSS
GM2004BKABGM2004BKBNGM2004BKBRGM2004BKBSGM2004BKCHGM2004BKPNGM2004BKSBGM2004BKSCGM2004BKSS
GM2004GYBSGM2004GYSCGM2004GYSS
GR
IDPR
O®
GR
IDPR
O®
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. These products are rated at 20AX; therefore all terminals should not exceed the stated amperage. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products were independently tested and achieved a 99.9% kill rate across all four types of the strains of bacteria - MRSA, E-Coli, Salmonella, and Klebsiella Pneumoniae.
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Material Composition
Voltage 250V~ 50Hz
Current Rating
Terminal Size ø 5mm
Torque Value 1.2Nm
Cable Size 2 2 2
Back Box Depth ®, Deco Plus®, Mode®, Polar ®
Modular Yes
Warranty 10 Years
Antimicrobial Certified
IP Rating IP20
Operational Temperature -5o o
Standards
DIMENSIONS
24.5
35
20
50
Technical SpecificationGridPro® Modules
Standards: BS EN 60669-1 Back Box Depth: Dependent On Plate Used Cable Size: 3 x 2.5mm² or 2 x 4mm² Dimensions: 24.5mm (W) x 50mm (H) x 22.5mm (D)
20AX Intermediate Switch Modules
GM2028PW 20AX Intermediate Switch Module - WhiteGM2028BK
GM2028PWBRGM2028PWBSGM2028PWCHGM2028PWPNGM2028PWSBGM2028PWSCGM2028PWSS 20AX Intermediate Switch Module - White - Stainless Steel
GM2028BKABGM2028BKBNGM2028BKBRGM2028BKBSGM2028BKCHGM2028BKPNGM2028BKSBGM2028BKSCGM2028BKSS
GM2028GYBSGM2028GYSCGM2028GYSS
GR
IDPR
O®
GR
IDPR
O®
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. These products are rated at 20AX; therefore all terminals should not exceed the stated amperage. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products independently tested have shown to have anti-viral properties against enveloped and non-enveloped viruses. A 99.99% kill off rate across all four types of the strains of bacteria - MRSA, E-Coli, Salmonella, Klebsiella Pneumonia and enveloped viruses and a 92% kill off rate against non-enveloped viruses.
Material Composition
Voltage 250V~ 50Hz
Current Rating 20AX
Terminal Size ø 5mm
Torque Value 1.2Nm
Cable Size 2 2 2
Back Box Depth ®, Deco Plus®, Mode®, Polar ®
Double Pole Yes
Modular Yes
Warranty 10 Years
Antimicrobial Certified
IP Rating IP20
Operational Temperature -5o o
Standards
DIMENSIONS
LOAD
SUPPLY
24.5
35
20
50
Technical SpecificationGridPro® Modules
GM2018PWSSGM2018PWPNGM2018PW GM2018PWSSGM2018PWPNGM2018PW
Standards: BS EN 60669-1 Back Box Depth: Dependent On Plate Used Cable Size: 3 x 2.5mm² or 2 x 4mm² Dimensions: 24.5mm (W) x 50mm (H) x 22.5mm (D)
20AX Double Pole Switch Modules
GM2018PW 20AX Double Pole Switch Module - WhiteGM2018BK
GM2018PWBRGM2018PWBSGM2018PWCHGM2018PWPNGM2018PWSBGM2018PWSCGM2018PWSS 20AX Double Pole Switch Module - White - Stainless Steel
GM2018BKABGM2018BKBNGM2018BKBRGM2018BKBSGM2018BKCHGM2018BKPNGM2018BKSBGM2018BKSCGM2018BKSS
GM2018GYBSGM2018GYSCGM2018GYSS
GR
IDPR
O®
GR
IDPR
O®
GR
IDPR
O®
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
GridPro® Modules
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. These products are rated at 20AX; therefore all terminals should not exceed the stated amperage. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products independently tested have shown to have anti-viral properties against enveloped and non-enveloped viruses. A 99.99% kill off rate across all four types of the strains of bacteria - MRSA, E-Coli, Salmonella, Klebsiella Pneumonia and enveloped viruses and a 92% kill off rate against non-enveloped viruses.
Material Composition
Voltage 250V~ 50Hz
Current Rating 20AX
Terminal Size ø 5mm
Torque Value 1.2Nm
Cable Size 2 2 2
Back Box Depth ®, Deco Plus®, Mode®, Polar ®
Double Pole Yes
Modular Yes
Warranty 10 Years
Antimicrobial Certified
IP Rating IP20
Operational Temperature -5o o
Standards
DIMENSIONS
LOAD
SUPPLY
24.5
35
20
50
Technical Specification
20AX Double Pole Switch Modules - Printed Legend
GM2018PW 20AX Double Pole Switch Module - WhiteGM2018BK
GM2018PWBRGM2018PWBSGM2018PWCHGM2018PWPNGM2018PWSBGM2018PWSCGM2018PWSS 20AX Double Pole Switch Module - White - Stainless Steel
GM2018BKABGM2018BKBNGM2018BKBRGM2018BKBSGM2018BKCHGM2018BKPNGM2018BKSBGM2018BKSCGM2018BKSS
Standards: BS EN 60669-1 Back Box Depth: Dependent On Plate Used Cable Size: 3 x 2.5mm² or 2 x 4mm² Dimensions: 24.5mm (W) x 50mm (H) x 22.5mm (D)
GM2018PWS-TDGM2018PWS TD
IN HOUSE LASER ETCHINGOur in house laser printer provides or custom jobs.
The GM2018 modules listed are available with the following laser etched legends:
-WM Washing Machine-FD Fridge-TD Tumble Dr-FZ Freezer-FF Fridge Freezer-FN Fan-DW Dishwasher-HB Hob-MW Microwave-BL-WD Waste Disposal-OV Oven-CH-WH Water Heater-HT Hot Tap-WC-WDR Warming Drawer
code with legend eg. GM2018PWCH-WM
GR
IDPR
O®
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. These products are rated at 20AX; therefore all terminals should not exceed the stated amperage. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products independently tested have shown to have anti-viral properties against enveloped and non-enveloped viruses. A 99.99% kill off rate across all four types of the strains of bacteria - MRSA, E-Coli, Salmonella, Klebsiella Pneumonia and enveloped viruses and a 92% kill off rate against non-enveloped viruses.
Material Composition
Voltage 250V~ 50Hz
Current Rating 20AX
Terminal Size ø 5mm
Torque Value 1.2Nm
Cable Size 2 2 2
Back Box Depth ®, Deco Plus®, Mode®, Polar ®
Double Pole Yes
Modular Yes
Warranty 10 Years
Antimicrobial Certified
IP Rating IP20
Operational Temperature -5o o
Standards
DIMENSIONS
LOAD
SUPPLY
24.5
35
20
50
Technical SpecificationGridPro® Modules
Standards: BS EN 60669-1 Back Box Depth: Dependent On Plate Used Cable Size: 3 x 2.5mm² or 2 x 4mm² Dimensions: 24.5mm (W) x 50mm (H) x 22.5mm (D)
20AX Double Pole Switch Modules with Neon
GM2018NPW 20AX Double Pole Switch With Neon Module - WhiteGM2018NBK
GM2018NPWBRGM2018NPWBSGM2018NPWCHGM2018NPWPNGM2018NPWSBGM2018NPWSCGM2018NPWSS 20AX Double Pole Switch With Neon Module - White - Stainless Steel
GM2018NBKABGM2018NBKBNGM2018NBKBRGM2018NBKBSGM2018NBKCHGM2018NBKPNGM2018NBKSBGM2018NBKSCGM2018NBKSS
GR
IDPR
O®
GR
IDPR
O®
I41
GR
IDPR
O®
I40
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
GridPro® Modules
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. These products are rated at 20AX; therefore all terminals should not exceed the stated amperage. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products independently tested have shown to have anti-viral properties against enveloped and non-enveloped viruses. A 99.99% kill off rate across all four types of the strains of bacteria - MRSA, E-Coli, Salmonella, Klebsiella Pneumonia and enveloped viruses and a 92% kill off rate against non-enveloped viruses.
Material Composition
Voltage 250V~ 50Hz
Current Rating 20AX
Terminal Size ø 5mm
Torque Value 1.2Nm
Cable Size 2 2 2
Back Box Depth ®, Deco Plus®, Mode®, Polar ®
Double Pole Yes
Modular Yes
Warranty 10 Years
Antimicrobial Certified
IP Rating IP20
Operational Temperature -5o o
Standards
DIMENSIONS
LOAD
SUPPLY
24.5
35
20
50
Technical Specification
Standards: BS EN 60669-1 Back Box Depth: Dependent On Plate Used Cable Size: 3 x 2.5mm² or 2 x 4mm² Dimensions: 24.5mm (W) x 50mm (H) x 22.5mm (D)
20AX Double Pole Switch Modules with Neon - Printed Legend
GM2018NPW 20AX Double Pole Switch With Neon Module - WhiteGM2018NBK
GM2018NPWBRGM2018NPWBSGM2018NPWCHGM2018NPWPNGM2018NPWSBGM2018NPWSCGM2018NPWSS 20AX Double Pole Switch With Neon Module - White - Stainless Steel
GM2018NBKABGM2018NBKBNGM2018NBKBRGM2018NBKBSGM2018NBKCHGM2018NBKPNGM2018NBKSBGM2018NBKSCGM2018NBKSS
IN HOUSE LASER ETCHINGOur in house laser printer provides or custom jobs.
The GM2018N modules listed are available with the following laser etched legends:
-WM Washing Machine-FD Fridge-TD Tumble Dr-FZ Freezer-FF Fridge Freezer-FN Fan-DW Dishwasher-HB Hob-MW Microwave-BL-WD Waste Disposal-OV Oven-CH-WH Water Heater-HT Hot Tap-WC-WDR Warming Drawer
code with legend eg. GM2018NPWCH-WM
GR
IDPR
O®
I42
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. These products are rated at 20AX; therefore all terminals should not exceed the stated amperage. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products were independently tested and achieved a 99.9% kill rate across all four types of the strains of bacteria - MRSA, E-Coli, Salmonella, and Klebsiella Pneumoniae.
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Material Composition
Voltage 250V~ 50Hz
Current Rating
Terminal Size ø 5mm
Torque Value 1.2Nm
Cable Size 2 2 2
Back Box Depth ®, Deco Plus®, Mode®, Polar ®
Modular Yes
Warranty 10 Years
Antimicrobial Certified
IP Rating IP20
Operational Temperature -5o o
Standards
DIMENSIONS
PIR
SUPPLY
24.5
35
20
50
Technical SpecificationGridPro® Modules
20AX 3 Position Switch Modules
GM2070PWGM2070BK
GM2070PWBRGM2070PWBSGM2070PWCHGM2070PWPNGM2070PWSBGM2070PWSCGM2070PWSS
GM2070BKABGM2070BKBNGM2070BKBRGM2070BKBSGM2070BKCHGM2070BKPNGM2070BKSBGM2070BKSCGM2070BKSS
GM2070GYBSGM2070GYSCGM2070GYSS
Standards: BS EN 60669-1 Back Box Depth: Dependent On Plate Used Cable Size: 3 x 2.5mm² or 2 x 4mm² Dimensions: 24.5mm (W) x 50mm (H) x 26mm (D)
GR
IDPR
O®
GR
IDPR
O®
I45I44
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. These products are rated at 20AX; therefore all terminals should not exceed the stated amperage. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products were independently tested and achieved a 99.9% kill rate across all four types of the strains of bacteria - MRSA, E-Coli, Salmonella, and Klebsiella Pneumoniae.
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Material Composition
Voltage 250V~ 50Hz
Current Rating 20AX
Terminal Size ø 5mm
Torque Value 1.2Nm
Cable Size 2 2 2
Back Box Depth ®, Deco Plus®, Mode®, Polar ®
Modular Yes
Warranty 10 Years
Antimicrobial Certified
IP Rating IP20
Operational Temperature -5o o
Standards
DIMENSIONS
LOAD
SUPPLY
M
24.5
35
20
50
Technical SpecificationGridPro® Modules
Standards: BS EN 60669-1 Back Box Depth: Dependent On Plate Used Cable Size: 3 x 2.5mm² or 2 x 4mm² Dimensions: 24.5mm (W) x 50mm (H) x 26mm (D)
GM2075PWSSGM2075PWPNGM2075PW
20AX 3 Position Retractive Switch Modules
GM2075PWGM2075BK
GM2075PWBRGM2075PWBSGM2075PWCHGM2075PWPNGM2075PWSBGM2075PWSCGM2075PWSS
GM2075BKABGM2075BKBNGM2075BKBRGM2075BKBSGM2075BKCHGM2075BKPNGM2075BKSBGM2075BKSCGM2075BKSS
GM2075GYBSGM2075GYSCGM2075GYSS
GR
IDPR
O®
GR
IDPR
O®
I47
GR
IDPR
O®
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. These products are rated at 20AX; therefore all terminals should not exceed the stated amperage. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products were independently tested and achieved a 99.9% kill rate across all four types of the strains of bacteria - MRSA, E-Coli, Salmonella, and Klebsiella Pneumoniae.
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Technical Specification
GM209002PWPNGM209002PWPN
Standards: BS EN 60669-1 Back Box Depth: Dependent On Plate Used Cable Size: 3 x 2.5mm² or 2 x 4mm² Dimensions: 24.5mm (W) x 50mm (H) x 19.5mm (D)
20AX 2 Way Toggle Switch Modules
GM209002BK
GM209002BKABGM209002BKBNGM209002BKBRGM209002BKBSGM209002BKCHGM209002BKPNGM209002BKSBGM209002BKSCGM209002BKSS
GM209002PWBRGM209002PWBSGM209002PWCHGM209002PWPNGM209002PWSBGM209002PWSCGM209002PWSS
GM209002GYBSGM209002GYSCGM209002GYSS
GridPro® Modules
24.5
35
20
50
DIMENSIONS
Material Composition
Voltage 250V~ 50Hz
Current Rating
Terminal Size ø 5mm
Torque Value 1.2Nm
Cable Size 2 2 2
Back Box Depth ®, Deco Plus®, Mode®, Polar ®
Modular Yes
Warranty 10 Years
Antimicrobial Certified No
IP Rating IP20
Operational Temperature -5o o
Standards
GR
IDPR
O®
I49
GR
IDPR
O®
I48
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. These products are rated at 20AX; therefore all terminals should not exceed the stated amperage. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products were independently tested and achieved a 99.9% kill rate across all four types of the strains of bacteria - MRSA, E-Coli, Salmonella, and Klebsiella Pneumoniae.
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
GM209018PWSSGM209018PWSS
Technical Specification
Standards: BS EN 60669-1 Back Box Depth: Dependent On Plate Used Cable Size: 3 x 2.5mm² or 2 x 4mm² Dimensions: 24.5mm (W) x 50mm (H) x 19.5mm (D)
20AX Double Pole Toggle Switch Modules
GM209018BK
GM209018BKABGM209018BKBNGM209018BKBRGM209018BKBSGM209018BKCHGM209018BKPNGM209018BKSBGM209018BKSCGM209018BKSS
GM209018PWBRGM209018PWBSGM209018PWCHGM209018PWPNGM209018PWSBGM209018PWSCGM209018PWSS 20AX Double Pole Toggle Switch Module - White - Stainless Steel
GM209018GYBSGM209018GYSCGM209018GYSS
GridPro® Modules
Material Composition
Voltage 250V~ 50Hz
Current Rating
Terminal Size ø 5mm
Torque Value 1.2Nm
Cable Size 2 2 2
Back Box Depth ®, Deco Plus®, Mode®, Polar ®
Modular Yes
Warranty 10 Years
Antimicrobial Certified No
IP Rating IP20
Operational Temperature -5o o
Standards
DIMENSIONS
LOAD
SUPPLY
24.5
35
20
50
GR
IDPR
O®
I51
GR
IDPR
O®
I50
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. These products are rated at 20AX; therefore all terminals should not exceed the stated amperage. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products were independently tested and achieved a 99.9% kill rate across all four types of the strains of bacteria - MRSA, E-Coli, Salmonella, and Klebsiella Pneumoniae.
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Technical Specification
209028PWPN209028PWPN
GridPro® Modules
20AX Intermediate Toggle Switch Modules
GM209028BK
GM209028BKABGM209028BKBNGM209028BKBRGM209028BKBSGM209028BKCHGM209028BKPNGM209028BKSBGM209028BKSCGM209028BKSS
GM209028PWBRGM209028PWBSGM209028PWCHGM209028PWPNGM209028PWSBGM209028PWSCGM209028PWSS 20AX Intermediate Toggle Switch Module - White - Stainless Steel
GM209028GYBSGM209028GYSCGM209028GYSS
Standards: BS EN 60669-1 Back Box Depth: Dependent On Plate Used Cable Size: 3 x 2.5mm² or 2 x 4mm² Dimensions: 24.5mm (W) x 50mm (H) x 19.5mm (D)
Material Composition
Voltage 250V~ 50Hz
Current Rating
Terminal Size ø 5mm
Torque Value 1.2Nm
Cable Size 2 2 2
Back Box Depth ®, Deco Plus®, Mode®, Polar ®
Modular Yes
Warranty 10 Years
Antimicrobial Certified No
IP Rating IP20
Operational Temperature -5o o
Standards
DIMENSIONS
24.5
35
20
50
GR
IDPR
O®
I52
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. These products are rated at 20AX; therefore all terminals should not exceed the stated amperage. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products were independently tested and achieved a 99.9% kill rate across all four types of the strains of bacteria - MRSA, E-Coli, Salmonella, and Klebsiella Pneumoniae.
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Material Composition
Voltage 250V~ 50Hz
Current Rating
Terminal Size ø 5mm
Torque Value 1.2Nm
Cable Size 2 2 2
Back Box Depth ®, Deco Plus®, Mode®, Polar ®
Modular Yes
Warranty 10 Years
Antimicrobial Certified No
IP Rating IP20
Operational Temperature -5o o
Standards
DIMENSIONS
24.5
35
20
50
Technical SpecificationGridPro® Modules
Standards: BS EN 60669-1 Back Box Depth: Dependent On Plate Used Cable Size: 3 x 2.5mm² or 2 x 4mm² Dimensions: 24.5mm (W) x 50mm (H) x 22.5mm (D)
20AX 2 Way Keyswitch Modules
GM2003PWGM2003BK
GM2003PWBRGM2003PWBSGM2003PWCHGM2003PWPNGM2003PWSBGM2003PWSCGM2003PWSS
GM2003BKABGM2003BKBNGM2003BKBRGM2003BKBSGM2003BKCHGM2003BKPNGM2003BKSBGM2003BKSCGM2003BKSS
GM2003GYBSGM2003GYSCGM2003GYSS
GR
IDPR
O®
GR
IDPR
O®
I55I54
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. These products are rated at 20AX; therefore all terminals should not exceed the stated amperage. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products were independently tested and achieved a 99.9% kill rate across all four types of the strains of bacteria - MRSA, E-Coli, Salmonella, and Klebsiella Pneumoniae.
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Material Composition
Voltage 250V~ 50Hz
Current Rating 20AX
Terminal Size ø 5mm
Torque Value 1.2Nm
Cable Size 2 2 2
Back Box Depth ®, Deco Plus®, Mode®, Polar ®
Modular Yes
Warranty 10 Years
Antimicrobial Certified No
IP Rating IP20
Operational Temperature -5o o
Standards
DIMENSIONS
24.5
35
20
50
Technical SpecificationGridPro® Modules
GM2014PWSSGM2014PWPNGM2014PW GM2014PWSSGM2014PWPNGM2014PW
Standards: BS EN 60669-1 Back Box Depth: Dependent On Plate Used Cable Size: 3 x 2.5mm² or 2 x 4mm² Dimensions: 24.5mm (W) x 50mm (H) x 22.5mm (D)
20AX 2 Way Retractive Keyswitch Modules
GM2014PWGM2014BK
GM2014PWBRGM2014PWBSGM2014PWCHGM2014PWPNGM2014PWSBGM2014PWSCGM2014PWSS
GM2014BKABGM2014BKBNGM2014BKBRGM2014BKBSGM2014BKCHGM2014BKPNGM2014BKSBGM2014BKSCGM2014BKSS
GM2014GYBSGM2014GYSCGM2014GYSS
GR
IDPR
O®
GR
IDPR
O®
I57
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. These products are rated at 20AX; therefore all terminals should not exceed the stated amperage. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products were independently tested and achieved a 99.9% kill rate across all four types of the strains of bacteria - MRSA, E-Coli, Salmonella, and Klebsiella Pneumoniae.
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Material Composition
Voltage 250V~ 50Hz
Current Rating
Terminal Size ø 5mm
Torque Value 1.2Nm
Cable Size 2 2 2
Back Box Depth ®, Deco Plus®, Mode®, Polar ®
Modular Yes
Warranty 10 Years
Antimicrobial Certified No
IP Rating IP20
Operational Temperature -5o o
Standards
DIMENSIONS
24.5
35
20
50
Technical SpecificationGridPro® Modules
Standards: BS EN 60669-1 Back Box Depth: Dependent On Plate Used Cable Size: 3 x 2.5mm² or 2 x 4mm² Dimensions: 24.5mm (W) x 50mm (H) x 22.5mm (D)
20AX Intermediate Keyswitch Modules
GM2029PWGM2029BK
GM2029PWBRGM2029PWBSGM2029PWCHGM2029PWPNGM2029PWSBGM2029PWSCGM2029PWSS
GM2029BKABGM2029BKBNGM2029BKBRGM2029BKBSGM2029BKCHGM2029BKPNGM2029BKSBGM2029BKSCGM2029BKSS
GM2029GYBSGM2029GYSCGM2029GYSS
GR
IDPR
O®
GR
IDPR
O®
I59I58
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. These products are rated at 20AX; therefore all terminals should not exceed the stated amperage. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products independently tested have shown to have anti-viral properties against enveloped and non-enveloped viruses. A 99.99% kill off rate across all four types of the strains of bacteria - MRSA, E-Coli, Salmonella, Klebsiella Pneumonia and enveloped viruses and a 92% kill off rate against non-enveloped viruses.
Material Composition
Voltage 250V~ 50Hz
Current Rating 20AX
Terminal Size ø 5mm
Torque Value 1.2Nm
Cable Size 2 2 2
Back Box Depth ®, Deco Plus®, Mode®, Polar ®
Double Pole Yes
Modular Yes
Warranty 10 Years
Antimicrobial Certified No
IP Rating IP20
Operational Temperature -5o o
Standards
DIMENSIONS
24.5
35
20
50
LOAD
SUPPLY
Technical SpecificationGridPro® Modules
Standards: BS EN 60669-1 Back Box Depth: Dependent On Plate Used Cable Size: 3 x 2.5mm² or 2 x 4mm² Dimensions: 24.5mm (W) x 50mm (H) x 22.5mm (D)
20AX Double Pole Keyswitch Modules
GM2046PWGM2046BK
GM2046PWBRGM2046PWBSGM2046PWCHGM2046PWPNGM2046PWSBGM2046PWSCGM2046PWSS
GM2046BKABGM2046BKBNGM2046BKBRGM2046BKBSGM2046BKCHGM2046BKPNGM2046BKSBGM2046BKSCGM2046BKSS
GM2046GYBSGM2046GYSCGM2046GYSS
GR
IDPR
O®
GR
IDPR
O®
GR
IDPR
O®
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
GridPro® Modules
Standards: BS EN 60669-1 Back Box Depth: Dependent On Plate Used Cable Size: 3 x 2.5mm² or 2 x 4mm² Dimensions: 24.5mm (W) x 50mm (H) x 22.5mm (D)
20AX Double Pole Keyswitch Modules - 'Emergency Test'
GM2046BKETGM2046PWET
GM2046PWBRETGM2046PWBSETGM2046PWCHETGM2046PWPNETGM2046PWSBETGM2046PWSCETGM2046PWSSET
GM2046BKABETGM2046BKBNETGM2046BKBRETGM2046BKBSETGM2046BKCHETGM2046BKPNETGM2046BKSBETGM2046BKSCETGM2046BKSSET
GM2046GYBSETGM2046GYSCETGM2046GYSSET Additional Information:
Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. These products are rated at 20AX; therefore all terminals should not exceed the stated amperage. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products independently tested have shown to have anti-viral properties against enveloped and non-enveloped viruses. A 99.99% kill off rate across all four types of the strains of bacteria - MRSA, E-Coli, Salmonella, Klebsiella Pneumonia and enveloped viruses and a 92% kill off rate against non-enveloped viruses.
Material Composition
Voltage 250V~ 50Hz
Current Rating 20AX
Terminal Size ø 5mm
Torque Value 1.2Nm
Cable Size 2 2 2
Back Box Depth ®, Deco Plus®, Mode®, Polar ®
Double Pole Yes
Modular Yes
Warranty 10 Years
Antimicrobial Certified No
IP Rating IP20
Operational Temperature -5o o
Standards
DIMENSIONS
24.5
35
20
50
LOAD
SUPPLY
Technical Specification
GR
IDPR
O®
MODULE BACK
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. These products are rated at 13A; therefore all terminals should not exceed the stated amperage. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products independently tested have shown to have anti-viral properties against enveloped and non-enveloped viruses. A 99.99% kill off rate across all four types of the strains of bacteria - MRSA, E-Coli, Salmonella, Klebsiella Pneumonia and enveloped viruses and a 92% kill off rate against non-enveloped viruses.
Material Composition
Voltage 250V~ 50Hz
Current Rating
Terminal Size ø 5mm
Torque Value 1.2Nm
Cable Size 2 2 2
Back Box Depth ®, Deco Plus®, Mode®, Polar ®
Lockable No
Modular Yes
Warranty 10 Years
Antimicrobial Certified No
IP Rating IP20
Operational Temperature -5o o
Standards
DIMENSIONS
LOAD
SUPPLY
24.5
35
20
50
Technical SpecificationGridPro® Modules
Standards: BS 1363-4 BS 1362 Back Box Depth: Dependent On Plate Used Cable Size: 3 x 2.5mm², 2 x 4mm² Dimensions: 24.5mm (W) x 50mm (H) x 25mm (D)
13A Fused Modules
GM2047PWGM2047BK
GM2047PWBRGM2047PWBSGM2047PWCHGM2047PWPNGM2047PWSBGM2047PWSCGM2047PWSS
GM2047BKABGM2047BKBNGM2047BKBRGM2047BKBSGM2047BKCHGM2047BKPNGM2047BKSBGM2047BKSCGM2047BKSS
MODULE BACK
GM2047GYBSGM2047GYSCGM2047GYSS
GR
IDPR
O®
GR
IDPR
O®
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. These products are rated at 13A; therefore all terminals should not exceed the stated amperage. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products independently tested have shown to have anti-viral properties against enveloped and non-enveloped viruses. A 99.99% kill off rate across all four types of the strains of bacteria - MRSA, E-Coli, Salmonella, Klebsiella Pneumonia and enveloped viruses and a 92% kill off rate against non-enveloped viruses.
Material Composition
Voltage 250V~ 50Hz
Current Rating
Terminal Size ø 5mm
Torque Value 1.2Nm
Cable Size 2 2 2
Back Box Depth ®, Deco Plus®, Mode®, Polar ®
Lockable
Modular Yes
Warranty 10 Years
Antimicrobial Certified No
IP Rating IP20
Operational Temperature -5o o
Standards
DIMENSIONS
LOAD
SUPPLY
24.5
35
20
50
Technical SpecificationGridPro® Modules
GM2047-LPWSSGM2047-LPWPNGM2047-LPW
Standards: BS 1363-4 BS 1362 Back Box Depth: Dependent On Plate Used Cable Size: 3 x 2.5mm², 2 x 4mm² Dimensions: 24.5mm (W) x 50mm (H) x 25mm (D)
13A Lockable Fused Modules
GM2047-LPWGM2047-LBK
GM2047-LPWBRGM2047-LPWBSGM2047-LPWCHGM2047-LPWPNGM2047-LPWSBGM2047-LPWSCGM2047-LPWSS
GM2047-LBKABGM2047-LBKBNGM2047-LBKBRGM2047-LBKBSGM2047-LBKCHGM2047-LBKPNGM2047-LBKSBGM2047-LBKSCGM2047-LBKSS
GM2047-LGYBSGM2047-LGYSCGM2047-LGYSS
GR
IDPR
O®
GR
IDPR
O®
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. These products are rated at 20A; therefore all terminals should not exceed the stated amperage. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products independently tested have shown to have anti-viral properties against enveloped and non-enveloped viruses. A 99.99% kill off rate across all four types of the strains of bacteria - MRSA, E-Coli, Salmonella, Klebsiella Pneumonia and enveloped viruses and a 92% kill off rate against non-enveloped viruses.
Material Composition
Voltage 250V~ 50Hz
Current Rating 20A
Terminal Size ø 5mm
Torque Value 1.2Nm
Cable Size 2 2 2
Back Box Depth ®, Deco Plus®, Mode®, Polar ®
Modular Yes
Warranty 10 Years
Antimicrobial Certified No
IP Rating IP20
Operational Temperature -5o o
Standards
DIMENSIONS
LOADSUPPLY
24.5
35
20
50
Technical SpecificationGridPro® Modules
GM2017PWSSGM2017PWPNGM2017PW
Standards: BS 5733 Back Box Depth: Dependent On Plate Used Cable Size: 3 x 2.5mm², 2 x 4mm² Dimensions: 24.5mm (W) x 50mm (H) x 28mm (D)
20A Flex Outlet Modules
GM2017PWGM2017BK
GM2017PWBRGM2017PWBSGM2017PWCHGM2017PWPNGM2017PWSBGM2017PWSCGM2017PWSS
GM2017BKABGM2017BKBNGM2017BKBRGM2017BKBSGM2017BKCHGM2017BKPNGM2017BKSBGM2017BKSCGM2017BKSS
GM2017GYBSGM2017GYSCGM2017GYSS
GR
IDPR
O®
GR
IDPR
O®
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal.
Material Composition
Back Box Depth ®, Deco Plus®, Mode®, Polar ®
Modular Yes
Warranty 10 Years
Antimicrobial Certified No
IP Rating IP20
Operational Temperature -5o o
Standards
DIMENSIONS
24.5
35
20
50
Technical SpecificationGridPro® Modules
Standards: BS 5733 Back Box Depth: 25mm Minimum Dimensions: 24.5mm (W) x 50mm (H) x 12mm (D)
Blank Modules
GM2008PWGM2008BK
GM2008PWBRGM2008PWBSGM2008PWCHGM2008PWPNGM2008PWSBGM2008PWSCGM2008PWSS
GM2008BKABGM2008BKBNGM2008BKBRGM2008BKBSGM2008BKCHGM2008BKPNGM2008BKSBGM2008BKSCGM2008BKSS
GM2008GYBSGM2008GYSCGM2008GYSS
GR
IDPR
O®
GR
IDPR
O®
I71I70
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal.
Material Composition
Voltage 250V~ 50Hz
Terminal Size ø 5mm
Torque Value 1.2Nm
Cable Size 2 2 2
Back Box Depth ®, Deco Plus®, Mode®, Polar ®
Modular Yes
Warranty 10 Years
IP Rating IP20
Operational Temperature -5o o
Standards
DIMENSIONS
24.5
35
20
50
Technical SpecificationGridPro® Modules
GM2082PWGM2081PWGM2080PW GM2082PWGM2081PWGM2080PW
Standards: BS 5733 Back Box Depth: Dependent On Plate Used Cable Size: 3 x 2.5mm², 2 x 4mm² Dimensions: 24.5mm (W) x 50mm (H) x 22.5mm (D)
Indicator Modules
GM2080BKGM2080PWGM2080GY
GM2081BKGM2081PW 240V~ Amber Indicator Module - WhiteGM2081GY
GM2082BKGM2082PW 240V~ Green Indicator Module - WhiteGM2082GY
GR
IDPR
O®
GR
IDPR
O®
GR
IDPR
O®
I72
24.5
35
20
50
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Technical Specification
DIMENSIONS
Material Composition
Voltage 250V~ 50Hz
Terminal Size ø 5mm
Torque Value 1.2Nm
Cable Size 2 2 2
Back Box Depth TM, Deco Plus®, ModeTM, PolarTM ® TM
Modular Yes
Warranty 10 Years
Anti Microbial Certified No
IP Rating IP20
Operational Temperature o o
Standards
GM2008GTPWGM2008GTPW
GridPro® Modules
Green Blank LED Illuminated Modules
GM2008GTBKGM2008GTPW
GM2008GTABGM2008GTBNGM2008GTBRGM2008GTBSGM2008GTCHGM2008GTPNGM2008GTSBGM2008GTSCGM2008GTSS
Red Blank LED Illuminated Modules
GM2008RTBKGM2008RTPW
GM2008RTABGM2008RTBNGM2008RTBRGM2008RTBSGM2008RTCHGM2008RTPNGM2008RTSBGM2008RTSCGM2008RTSS
Standards: BS 5733 Back Box Depth: Dependent on Plate Used Cable Size: 3 x 2.5mm², 2 x 4mm² Dimensions: 24.5mm (W) x 50mm (H) x 19.5mm (D)
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal.
IN HOUSE LASER ETCHINGOur in house laser printer provides or custom jobs.
Ideal for Hotel locations. ® range of frontplates.
GR
IDPR
O®
I75
GR
IDPR
O®
I74
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. These products are rated at 20AX; therefore all terminals should not exceed the stated amperage. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products independently tested have shown to have anti-viral properties against enveloped and non-enveloped viruses. A 99.99% kill off rate across all four types of the strains of bacteria - MRSA, E-Coli, Salmonella, Klebsiella Pneumonia and enveloped viruses and a 92% kill off rate against non-enveloped viruses.
Technical Specification
Material Composition
Voltage 250V~ 50Hz
Current Rating
Terminal Size ø 5mm
Torque Value 1.2Nm
Cable Size 2 2 2
Back Box Depth TM, Deco Plus, ModeTM, PolarTM ® TM
Modular Yes
Warranty 10 Years
Anti Microbial Certified
IP Rating IP20
Operational Temperature o o
Standards
20AX Locator Switch Modules (Blue LED)
GM2001BTBKGM2001BTPW
GM2002BTBKGM2002BTPW
GM2028BTBKGM2028BTPW 20AX Intermediate Switch Module - White With Transparent SurroundThe switch will illuminate when the switch is in the 'OFF' position.
20AX Indicator Switch Modules (Blue LED)GM2018BTBKGM2018BTPW 20AX Double Pole Switch Module - White With Transparent SurroundThe switch will illuminate when the switch is in the 'ON' position.
GridPro® Modules
Standards: BS EN 60669-1 Back Box Depth: Dependent on Plate Used Cable Size: 3 x 2.5mm², 2 x 4mm² Dimensions: 24.5mm (W) x 50mm (H) x 22.5mm (D)
GR
IDPR
O®
I77
GR
IDPR
O®
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. These products are rated at 20AX; therefore all terminals should not exceed the stated amperage. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products independently tested have shown to have anti-viral properties against enveloped and non-enveloped viruses. A 99.99% kill off rate across all four types of the strains of bacteria - MRSA, E-Coli, Salmonella, Klebsiella Pneumonia and enveloped viruses and a 92% kill off rate against non-enveloped viruses.
Technical Specification
GM2600 GM2650 GM2300 GM2515Material Composition Cover, Insert & Rear Housing: Nylon
Terminals: Brass
Terminal Screws: Steel & Yellow Passivated
Voltage 240V 200-250V 30V DC MAX 240V
USB Type N/A N/A 2 x Type A Type A
USB Charging Output N/A N/A N/A 5V DC 2.4A
Cable Size 2 x 1.5mm2 2 x 1.5mm2 N/A 2 x 1.5mm2
Terminal Type Screw Terminals Screw Terminals N/A Screw Terminals
Back Box Depth35mm
(Deco/Deco Plus/Mode/Polar) 47mm
25mm (Deco/Deco Plus/Mode/Polar)
35mm
35mm (Deco/Deco Plus/Mode/Polar)
47mm
35mm (Deco/Deco Plus/Mode/Polar)
47mm
Modular Yes
Warranty 10 Years (1 Year Electronics)
Anti Microbial Certified No
IP Rating IP20
Operational Temperature -5oC to +40oC
Standards BS5733 BS5733 N/ABS EN 62368-1,
BS EN 61000-6-1, BS EN 61000-6-3:
Standards: 2300: BS EN 62368-1 BS EN 61000-6-1 BS EN 61000-6-3 2650 2600:BS 5733 Back Box Depth: Dependent on Plate Used Cable Size: 2650 2600: 2 x 1.5mm² 2300 2515: 3 x 2.5mm², 2 x 4mm² or 1 x 6.0mm² Dimensions: 2300 2515: 24.5mm (W) x 50mm (H) x 40mm (D)
2650: 24.5mm (W) x 50mm (H) x 31.5mm (D) 2600: 24.5mm (W) x 50mm (H) x 25mm (D)
GridPro® Modules
Buzzer Module
GM2650BKGM2650PW
Time Delay Switch Modules
GM2600BKGM2600PW
Time Settings: 10 minutes or 30 minutes
USB Connection Modules
GM2300BKGM2300PW
Flylead: 95mm overall length
USB Charging Modules
GM2515BKGM2515WH
GM2515WHGM2515WH
GM2515
L
N
1B2
L
NL N
GM2515
GR
IDPR
O®
I79
GR
IDPR
O®
I78
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. These products are rated at 20AX; therefore all terminals should not exceed the stated amperage. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products independently tested have shown to have anti-viral properties against enveloped and non-enveloped viruses. A 99.99% kill off rate across all four types of the strains of bacteria - MRSA, E-Coli, Salmonella, Klebsiella Pneumonia and enveloped viruses and a 92% kill off rate against non-enveloped viruses.
+ _
GM2490
Back Box Depth: Dependent on Plate Used Cable Size: Dependant on module used Warranty: 10 Years (1 Year Electronics) Dimensions: GM2490: 24.5mm (W) x 50mm (H) x 15mm (D) GM2495: 24.5mm (W) x 50mm (H) x 13.5mm (D)
GM2496: 24.5mm (W) x 50mm (H) x 35mm (D) GM2497: 24.5mm (W) x 50mm (H) x 19.5mm (D)
Technical Specification
GM2490PWGM2490PW GM2495PW GM2497PW
GM2490 GM2495 GM2497
GM2495PW GM2497PW
Media Modules
GM2490BKGM2490PW
GM2495BKGM2495PW
GM2496BKGM2496PW
Flylead: 98mm overall length
GM2497BKGM2497PW HIFI Module - White
GridPro® Modules
GM2490 GM2495 GM2496 GM2497Material Composition
Cable Size 2 2 2
Terminal Type Screw Terminals Screw Down or Screw Terminals
Back Box Depth 25mm Minimum 25mm Minimum 25mm Minimum
Modular Yes
Warranty
Anti Microbial Certified No
IP Rating IP20
Operational Temperature -5o o
GM2495 GM2497
+ _
+ _
GR
IDPR
O®
I81
GR
IDPR
O®
I80
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. These products are rated at 20AX; therefore all terminals should not exceed the stated amperage. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products independently tested have shown to have anti-viral properties against enveloped and non-enveloped viruses. A 99.99% kill off rate across all four types of the strains of bacteria - MRSA, E-Coli, Salmonella, Klebsiella Pneumonia and enveloped viruses and a 92% kill off rate against non-enveloped viruses.
Back Box Depth: 16mm Minimum Cable Size: Dependent on Plate Used Warranty: 10 Years (1 Year Electronics) Dimensions: GM2460 GM2465: 24.5mm (W) x 50mm (H) x 18mm (D)
GM2470: 24.5mm (W) x 50mm (H) x 16mm (D) GM2485: 24.5mm (W) x 50mm (H) x 17.5mm (D)
Technical Specification
GM2470PW GM2485PW
GM2470 GM2485
GM2470PW GM2485PW
Telephone/Data Modules
GM2460BKGM2460PW
GM2465BKGM2465PW
GM2470BKGM2470PW
GM2485BKGM2485PW
GridPro® Modules
GM2460 GM2465 GM2470 GM2485Material Composition
Terminal Type
Back Box Depth 25mm Minimum
Modular Yes
Warranty
Anti Microbial Certified No
IP Rating IP20
Operational Temperature -5o o
6
5
4 3
2
1
= 5= 2
GM2470
6
5
4 3
2
1
= 3= 4
= 2= 5
65
432
1
= 2= 3
= 5= 4
GM2485
87
546
3
21
= 2= 1
= 8= 7
= 6= 3
= 4= 5
GR
IDPR
O®
GR
IDPR
O®
I82
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. These products are rated at 20AX; therefore all terminals should not exceed the stated amperage. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products independently tested have shown to have anti-viral properties against enveloped and non-enveloped viruses. A 99.99% kill off rate across all four types of the strains of bacteria - MRSA, E-Coli, Salmonella, Klebsiella Pneumonia and enveloped viruses and a 92% kill off rate against non-enveloped viruses.
GM2405 GM2410 GM2415
Back Box Depth: Dependent on Plate Used Cable Size: 2 x 4mm2, 3 x 2.5mm2 or 1 x 6mm2 Warranty: 10 Years (1 Year Electronics) Dimensions: GM2305: 24.5mm (W) x 50mm (H) x 43mm (D)
GM2405 GM2410 GM2415: 24.5mm (W) x 50mm (H) x 20mm (D) GM2501: 24.5mm (W) x 50mm (H) x 45mm (D)
Technical Specification
TV/Satellite Modules
GM2305BKGM2305PW VGA Module - White
Flylead: 160mm overall length
GM2405BKGM2405PW Satellite Module - White
GM2410BKGM2410PW
GM2415BKGM2415PW
GM2501BKGM2501PW
Flylead: 145mm overall length
GM2405PW
GM2501PWGM2405
GM2405PW
GridPro® Modules
GM2415PWGM2415PW
GM2305 GM2405 GM2410 GM2415 GM2501
Material Composition
Terminal Type VGA Screw Terminals HDMI
Version 2
Shielded Yes
Isolated No No No
Modular Yes
Warranty
Anti Microbial Certified No
IP Rating IP20
Operational Temperature -5o o
GR
IDPR
O®
I85I84
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
DIMENSIONS
Material Composition
Back Box Depth ®, Deco Plus®, Mode®, Polar , Define®
Modular Yes
Warranty 10 Years
Antimicrobial Certified No
IP Rating IP20
Operational Temperature -5o o
Standards
INSTALLATION
The dimmer mounting modules attach to a
24.5
35
20
50
Technical SpecificationGridPro® Dimmer Mounting Kits
GM050PW
1 Module Dimmer Mounting Kit
GM050PW 1 Module Dimmer Mounting Kit - WhiteGM050BK
GM050PWBRGM050PWBSGM050PWCHGM050PWPNGM050PWSBGM050PWSCGM050PWSS 1 Module Dimmer Mounting Kit - White - Stainless Steel
Standards: BS 5733 Back Box Depth: 47mm Cable Size: Dependant on Dimmer used Dimensions: 24.5mm (W) x 50mm (H)
GM050BKABGM050BKBNGM050BKBRGM050BKBSGM050BKCHGM050BKPNGM050BKSBGM050BKSCGM050BKSS
GM050GYBSGM050GYSCGM050GYSS
For Dimmer Modules see page I88.
GR
IDPR
O®
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal.
GR
IDPR
O®
I87
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal.
Material Composition
Back Box Depth ®, Deco Plus®, Mode®, Polar , Define®
Modular Yes
Warranty 10 Years
Antimicrobial Certified No
IP Rating IP20
Operational Temperature -5o o
Standards
DIMENSIONS
Suitable for plates with 2, 4, 8, 12, 18 or 24 apertures.
INSTALLATION
The dimmer mounting modules attach to a
49
35
20
50
Technical SpecificationGridPro® Dimmer Mounting Kits
2 Module Dimmer Mounting Kit
GM150PW 2 Module Dimmer Mounting Kit - WhiteGM150BK
GM150PWBRGM150PWBSGM150PWCHGM150PWPNGM150PWSBGM150PWSCGM150PWSS 2 Module Dimmer Mounting Kit - White - Stainless Steel
Standards: BS 5733 Back Box Depth: 47mm Cable Size: Dependant on Dimmer used Dimensions: 49mm (W) x 50mm (H)
GM150BKABGM150BKBNGM150BKBRGM150BKBSGM150BKCHGM150BKPNGM150BKSBGM150BKSCGM150BKSS
GM150GYBSGM150GYSCGM150GYSS
For Dimmer Modules see page I88.
GR
IDPR
O®
I88
[email protected] | Call: 01827 63454 | scolmore.comCLICK® WIRING ACCESSORIES
GridPro® Frontplates
GridPro® Frontplates
The GridPro® frontplates illustrated on the following pages are all unfurnished
the required modules.
The new 1 - 24 gang frontplates designed for GridPro®
®
® frontplates.
the new GridPro® frontplates, we have ensured all Mode® and Polar products maintain the urea material to ensure consistent aesthetics and colour matching throughout the range as well
GridPro® Modules
Standards: BS EN 60669-1BS EN 55015 BS EN 61000-3-2 BS EN 61000-3-3 9014:BS EN 60669 BS EN 55015BS EN 61000 9001: BS EN 60669-1 Back Box Depth: Dependent On Plate Used Cable Size: 2 x 1.5mm² Dimmer Type: 9001: On & Off Only 9010: Analogue 9022 9042: Leading Edge
MD9014: Trailing Edge & Leading Edge
GM9010
Dimmer Modules
GM9001GM9010 1-10V Analogue Dimmer ModuleGM9022GM9042
The Click® dimming modules above are suitable for mounting next to each other using the appropriate mounting kit. Due to their physical size, they are not suitable to be mounted directly above each other.
Dimmer Modules
MD9014
Due to the reduced height, the MD9014 is suitable for mounting directly above each other.
MD9014
GR
IDPR
O®
GR
IDPR
O®
I91
Catalogue Main Header 1
[email protected] | Call: 01827 63454 | scolmore.com
Deco Plus® GridPro® Frontplates
Standards: BS 5733 Back Box Depth: 25mm Minimum Dimensions: 88mm (W) x 88mm (H) x 8mm (D)
Deco Plus® 1 Gang GridPro® Frontplates
DPAB20401 1 Gang GridPro®
DPBN20401 1 Gang GridPro®
DPBR20401 1 Gang GridPro®
DPCH20401 1 Gang GridPro®
DPSB20401 1 Gang GridPro®
DPSC20401 1 Gang GridPro®
DPSS20401 1 Gang GridPro® Frontplate - Stainless Steel
Deco Plus® 2 Gang GridPro® Frontplates
DPAB20402 2 Gang GridPro®
DPBN20402 2 Gang GridPro®
DPBR20402 2 Gang GridPro®
DPCH20402 2 Gang GridPro®
DPSB20402 2 Gang GridPro®
DPSC20402 2 Gang GridPro®
DPSS20402 2 Gang GridPro® Frontplate - Stainless Steel
Understanding the code: DP - Plate Style BN - Plate Finish 20401 - Product No. AB Antique Brass, BR Polished Brass, SB Satin Brass, CH Polished Chrome, SC Satin Chrome, BN Black Nickel, SS Stainless Steel.
DPSS20402
SCREW-INMODULES
NO YOKE
STANDARD BACK BOX
Deco Plus® GridPro® FrontplatesThe Deco Plus® range is a premium decorative metal range of wiring accessories, this range is available in seven finishes to complement
GR
IDPR
O®
I92
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Deco Plus® GridPro® Frontplates
Standards: BS 5733 Back Box Depth: 25mm Minimum Dimensions: 146mm (W) x 88mm (H) x 8mm (D)
Deco Plus® 3 Gang GridPro® Frontplates
DPAB20403 ®
DPBN20403 ®
DPBR20403 ®
DPCH20403 ®
DPSB20403 ®
DPSC20403 ®
DPSS20403 ® Frontplate - Stainless Steel
Deco Plus® 4 Gang GridPro® Frontplates
DPAB20404 4 Gang GridPro®
DPBN20404 4 Gang GridPro®
DPBR20404 4 Gang GridPro®
DPCH20404 4 Gang GridPro®
DPSB20404 4 Gang GridPro®
DPSC20404 4 Gang GridPro®
DPSS20404 4 Gang GridPro® Frontplate - Stainless Steel
Understanding the code: DP - Plate Style BN - Plate Finish 20403 - Product No. AB Antique Brass, BR Polished Brass, SB Satin Brass, CH Polished Chrome, SC Satin Chrome, BN Black Nickel, SS Stainless Steel.
DPSS20404
SCREW-INMODULES
NO YOKE
STANDARD BACK BOX
® Frontplates
Deco Plus® Hotel Accessory GridPro® Frontplates
DPAB31102 ® Frontplate
DPBN31102 ® Frontplate
DPBR31102 ® Frontplate
DPCH31102 ® Frontplate
DPSB31102 ® Frontplate
DPSC31102 ® Frontplate
DPSS31102 ® Frontplate With Twin New Media Aperture - Stainless Steel
Standards: BS 5733 Back Box Depth: Dependent On Modules Fitted Dimensions: 146mm (W) x 88mm (H) x 8mm (D)
Understanding the code: DP - Plate Style BN - Plate Finish 31102 - Product No. AB Antique Brass, BR Polished Brass, SB Satin Brass, CH Polished Chrome, SC Satin Chrome, BN Black Nickel, SS Stainless Steel.
SCREW-INMODULES
NO YOKE
STANDARD BACK BOX
See our dedicated New MediaTM section for more information on the range of New MediaTM modules available.
GR
IDPR
O®
GR
IDPR
O®
I95I94
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Deco Plus® GridPro® Frontplates
Deco Plus® 6 Gang GridPro® Frontplates
DPAB20506 ®
DPBN20506 ®
DPBR20506 ®
DPCH20506 ®
DPSB20506 ®
DPSC20506 ®
DPSS20506 ® Frontplate - Stainless Steel
Deco Plus® 8 Gang GridPro® Frontplates
DPAB20508 8 Gang GridPro®
DPBN20508 8 Gang GridPro®
DPBR20508 8 Gang GridPro®
DPCH20508 8 Gang GridPro®
DPSB20508 8 Gang GridPro®
DPSC20508 8 Gang GridPro®
DPSS20508 8 Gang GridPro® Frontplate - Stainless Steel
Understanding the code: DP - Plate Style BN - Plate Finish 20506 - Product No. AB Antique Brass, BR Polished Brass, SB Satin Brass, CH Polished Chrome, SC Satin Chrome, BN Black Nickel, SS Stainless Steel.
Standards: BS 5733 Back Box Depth: 47mm Dimensions: 148mm (W) x 148mm (H) x 8mm (D)
CLIP-ONMODULES
WITH TABSFITTING ON BACK
BOX SURFACE
Deco Plus® GridPro® Frontplates
Deco Plus® 9 Gang GridPro® Frontplates
DPAB20509 9 Gang GridPro®
DPBN20509 9 Gang GridPro®
DPBR20509 9 Gang GridPro®
DPCH20509 9 Gang GridPro®
DPSB20509 9 Gang GridPro®
DPSC20509 9 Gang GridPro®
DPSS20509 9 Gang GridPro® Frontplate - Stainless Steel
Deco Plus® 12 Gang GridPro® Frontplates
DPAB20512 12 Gang GridPro®
DPBN20512 12 Gang GridPro®
DPBR20512 12 Gang GridPro®
DPCH20512 12 Gang GridPro®
DPSB20512 12 Gang GridPro®
DPSC20512 12 Gang GridPro®
DPSS20512 12 Gang GridPro® Frontplate - Stainless Steel
Understanding the code: DP - Plate Style BN - Plate Finish 20509 - Product No. AB Antique Brass, BR Polished Brass, SB Satin Brass, CH Polished Chrome, SC Satin Chrome, BN Black Nickel, SS Stainless Steel.
Standards: BS 5733 Back Box Depth: 47mm Dimensions: 148mm (W) x 207mm (H) x 8mm (D)
CLIP-ONMODULES
WITH TABSFITTING ON BACK
BOX SURFACE
GR
IDPR
O®
GR
IDPR
O®
I97
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Deco Plus® GridPro® Frontplates
Deco Plus® 18 Gang GridPro® Frontplates
DPAB20518 18 Gang GridPro®
DPBN20518 18 Gang GridPro®
DPBR20518 18 Gang GridPro®
DPCH20518 18 Gang GridPro®
DPSB20518 18 Gang GridPro®
DPSC20518 18 Gang GridPro®
DPSS20518 18 Gang GridPro® Frontplate - Stainless Steel
Understanding the code: DP - Plate Style BN - Plate Finish 20518 - Product No. AB Antique Brass, BR Polished Brass, SB Satin Brass, CH Polished Chrome, SC Satin Chrome, BN Black Nickel, SS Stainless Steel.
Standards: BS 5733 Back Box Depth: 56mm Dimensions: 198mm (W) x 207mm (H) x 8mm (D)
CLIP-ONMODULES
WITH TABSFITTING ON BACK
BOX SURFACE
Deco Plus® GridPro® Frontplates
Understanding the code: DP - Plate Style BN - Plate Finish 20518 - Product No. AB Antique Brass, BR Polished Brass, SB Satin Brass, CH Polished Chrome, SC Satin Chrome, BN Black Nickel, SS Stainless Steel.
Standards: Back Box Depth: 56mm Dimensions: 198mm (W) x 268mm (H) x 8mm (D)
Deco Plus® 24 Gang GridPro® Frontplates
DPAB20524 24 Gang GridPro®
DPBN20524 24 Gang GridPro®
DPBR20524 24 Gang GridPro®
DPCH20524 24 Gang GridPro®
DPSB20524 24 Gang GridPro®
DPSC20524 24 Gang GridPro®
DPSS20524 24 Gang GridPro® Frontplate - Stainless Steel
CLIP-ONMODULES
WITH TABSFITTING ON BACK
BOX SURFACE
GR
IDPR
O®
[email protected] | Call: 01827 63454 | scolmore.com
GRI
DPR
O® F
RON
TPLA
TES
GridPro® Frontplates
finishes, the ultimate finishing touch.
of the inserts which means that the initial installation of the product can be carried
maintenance completed before the final
3. GridPro®
CLIP-ONMODULES
1.
2. each module.
insert with a pivot motion.
GR
IDPR
O®
I102
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
® Frontplates
Definity™ 3 Gang GridPro® Frontplates
SCP20403BK ®
SCP20403BS ®
SCP20403CH ®
SCP20403PW ® Frontplate - WhiteSCP20403SS ® Frontplate - Stainless SteelSCP20403MW ® Frontplate - Metal White
Definity™ 4 Gang GridPro® Frontplates
SCP20404BK 4 Gang GridPro®
SCP20404BS 4 Gang GridPro®
SCP20404CH 4 Gang GridPro®
SCP20404PW 4 Gang GridPro® Frontplate - WhiteSCP20404SS 4 Gang GridPro® Frontplate - Stainless SteelSCP20404MW 4 Gang GridPro® Frontplate - Metal White
Definity™ Module Insert
SIN20400 ® Module Insert
Understanding the code: SCP - Plate Style 20403 - Product No. CH - Plate Finish CH Polished Chrome BS Brushed Stainless SS Stainless Steel BK Matt Black PW White MW Metal White
Standards: BS 5733 Back Box Depth: Dependant on module used Dimensions: 146mm (W) x 86mm (H) x 4mm (D)
GridPro® frontplates on this page require the
shown below.
SIN20400
CLIP-ONMODULES
NO YOKE
STANDARD BACK BOX
® Frontplates
Definity™ 1 Gang GridPro® Frontplates
SCP20401BK 1 Gang GridPro®
SCP20401BS 1 Gang GridPro®
SCP20401CH 1 Gang GridPro®
SCP20401PW 1 Gang GridPro® Frontplate - WhiteSCP20401SS 1 Gang GridPro® Frontplate - Stainless SteelSCP20401MW 1 Gang GridPro® Frontplate - Metal White
Definity™ 2 Gang GridPro® Frontplates
SCP20402BK 2 Gang GridPro®
SCP20402BS 2 Gang GridPro®
SCP20402CH 2 Gang GridPro®
SCP20402PW 2 Gang GridPro® Frontplate - WhiteSCP20402SS 2 Gang GridPro® Frontplate - Stainless SteelSCP20402MW 2 Gang GridPro® Frontplate - Metal White
Definity™ Module Insert
SIN20200 1 & 2 GridPro® Module Insert
Understanding the code: SCP - Plate Style 20401 - Product No. CH - Plate Finish CH Polished Chrome BS Brushed Stainless SS Stainless Steel BK Matt Black PW White MW Metal White
Standards: BS 5733 Back Box Depth: Dependant on module used Dimensions: 86mm (W) x 86mm (H) x 4mm (D) 20200: 82mm (W) x 60mm (H) x 8mm (D)
GridPro® frontplates on this page require the
designated 1 and 2 module insert shown below.
SIN20200
CLIP-ONMODULES
NO YOKE
STANDARD BACK BOX
GR
IDPR
O®
GR
IDPR
O®
I105
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
I104
[email protected] | Call: 01827 63454 | scolmore.comCLICK® WIRING ACCESSORIES
® Frontplates
Definity™ 6 Gang GridPro® Frontplates
SCP20506BK ®
SCP20506BS ®
SCP20506CH ®
SCP20506PW ® Frontplate - WhiteSCP20506SS ® Frontplate - Stainless SteelSCP20506MW ® Frontplate - Metal White
Definity™ 8 Gang GridPro® Frontplates
SCP20508BK 8 Gang GridPro®
SCP20508BS 8 Gang GridPro®
SCP20508CH 8 Gang GridPro®
SCP20508PW 8 Gang GridPro® Frontplate - WhiteSCP20508SS 8 Gang GridPro® Frontplate - Stainless SteelSCP20508MW 8 Gang GridPro® Frontplate - Metal White
Definity™ Module Insert
SIN20400 ® Module Insert
Standards: BS 5733 Back Box Depth: 47mm Minimum Dimensions: 146mm (W) x 146mm (H) x 4mm (D) 20400: 142mm (W) x 60mm (H) x 8mm (D)
Understanding the code: SCP - Plate Style 20401 - Product No. CH - Plate Finish CH Polished Chrome BS Brushed Stainless SS Stainless Steel BK Matt Black PW White MW Metal White
GridPro® frontplates on this page
shown here.
SIN20400
NO YOKE
CLIP-ONMODULES
® Frontplates
Definity™ Hotel Accessory GridPro® Frontplates
SCP31102BK ® Frontplate With
SCP31102BS ® Frontplate With
SCP31102CH ® Frontplate With
SCP31102PW ® Frontplate With
SCP31102SS ® Frontplate With
SCP31102MW ® Frontplate With
Definity™ Hotel Accessory GridPro® Insert
SIN31102BK ® Frontplate With Twin New Media Aperture Insert
Understanding the code: SCP - Plate Style 31102 - Product No. CH - Plate Finish CH Polished Chrome BS Brushed Stainless SS Stainless Steel BK Matt Black PW White MW Metal White
Standards: BS 5733 Back Box Depth: Dependent On Modules Fitted Dimensions: 146mm (W) x 86mm (H) x 4mm (D)
GridPro® frontplates on this page require the
module insert shown below.
CLIP-ONMODULES
NO YOKE
STANDARD BACK BOX
See our dedicated New MediaTM section for more information on the range of modules available.
GR
IDPR
O®
[email protected] | Call: 01827 63454 | scolmore.com
® GridPro® Frontplates
The Define® flat plate range of accessories offers up a host of new design opportunities with a comprehensive
different decorative plate finishes.
scolmore.com
®®
ate range of accessories offers up a n opportunities with a comprehensive
e plate finishes.
4. The position of the frontplate in relation to the wall can be
recessed level with the wall
that the frontplate mounts flush to the wall.
To accommodate ®
frontplates there is an
2. cables into each module.
with a pivot motion.
3. Attach the frontplate using
modules sit behind the
screws tighten up and pull them forward into place.
CLIP-ONMODULES
1.
GR
IDPR
O®
I111I110
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Define® GridPro® Frontplates
Define® 3 Gang GridPro® Frontplates
FPBN20403 ®
FPBS20403 ®
FPCH20403 ®
FPPN20403 ®
FPSS20403 ® Frontplate - Stainless Steel
Define® 4 Gang GridPro® Frontplates
FPBN20404 4 Gang GridPro®
FPBS20404 4 Gang GridPro®
FPCH20404 4 Gang GridPro®
FPPN20404 4 Gang GridPro®
FPSS20404 4 Gang GridPro® Frontplate - Stainless Steel
Understanding the code: FP - Plate Style BN - Plate Finish 20404 - Product No. CH Polished Chrome, BN Black Nickel, PN Pearl Nickel, BS Brushed Stainless, SS Stainless Steel.
Standards: BS 5733 Back Box Depth: 35mm Minimum Dimensions: 146mm (W) x 88mm (H) x 1.3mm (D)
FPSS20404FPPN20404
SCREW-INMODULES
NO YOKE
STANDARD BACK BOX
Define® GridPro® Frontplates
Define® 1 Gang GridPro® Frontplates
FPBN20401 1 Gang GridPro®
FPBS20401 1 Gang GridPro®
FPCH20401 1 Gang GridPro®
FPPN20401 1 Gang GridPro®
FPSS20401 1 Gang GridPro® Frontplate - Stainless Steel
Define® 2 Gang GridPro® Frontplates
FPBN20402 2 Gang GridPro®
FPBS20402 2 Gang GridPro®
FPCH20402 2 Gang GridPro®
FPPN20402 2 Gang GridPro®
FPSS20402 2 Gang GridPro® Frontplate - Stainless Steel
Understanding the code: FP - Plate Style BN - Plate Finish 20401 - Product No. CH Polished Chrome, BN Black Nickel, PN Pearl Nickel, BS Brushed Stainless, SS Stainless Steel.
Standards: BS 5733 Back Box Depth: 35mm Minimum Dimensions: 86mm (W) x 86mm (H) x 1.3mm (D)
FPPN20401
FPPN20402FPSS20402
SCREW-INMODULES
NO YOKE
STANDARD BACK BOX
GR
IDPR
O®
GR
IDPR
O®
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
I112
® Frontplates
Define® Hotel Accessory GridPro® Frontplates
FPBN31102 ® Frontplate
FPBS31102 ® Frontplate
FPCH31102 ® Frontplate
FPPN31102 ® Frontplate
FPSS31102 ® Frontplate With Twin New Media Aperture - Stainless Steel
Understanding the code: FP - Plate Style BN - Plate Finish 31102 - Product No. CH Polished Chrome, BN Black Nickel, PN Pearl Nickel, BS Brushed Stainless, SS Stainless Steel.
Standards: BS 5733 Back Box Depth: Dependent On Modules Fitted Dimensions: 146mm (W) x 88mm (H) x 1.3mm (D)
SCREW-INMODULES
NO YOKE
STANDARD BACK BOX
Define® GridPro® Frontplates
Define® 6 Gang GridPro® Frontplates
FPBN20506 ®
FPBS20506 ®
FPCH20506 ®
FPPN20506 ®
FPSS20506 ® Frontplate - Stainless Steel
Define® 8 Gang GridPro® Frontplates
FPBN20508 8 Gang GridPro®
FPBS20508 8 Gang GridPro®
FPCH20508 8 Gang GridPro®
FPPN20508 8 Gang GridPro®
FPSS20508 8 Gang GridPro® Frontplate - Stainless Steel
Understanding the code: FP - Plate Style BN - Plate Finish 20404 - Product No. CH Polished Chrome, BN Black Nickel, PN Pearl Nickel, BS Brushed Stainless, SS Stainless Steel.
Standards: BS 5733 Back Box Depth: 47mm Dimensions: 148mm (W) x 148mm (H) x 1.3mm (D)
SNAP TABSFITTING INSIDE
BACK BOX
CLIP-ONMODULES
See our dedicated New MediaTM section for more information on the range of New MediaTM modules available.
GR
IDPR
O®
GR
IDPR
O®
I115I114
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Define® GridPro® Frontplates
Define® 9 Gang GridPro® Frontplates
FPBN20509 9 Gang GridPro®
FPBS20509 9 Gang GridPro®
FPCH20509 9 Gang GridPro®
FPPN20509 9 Gang GridPro®
FPSS20509 9 Gang GridPro® Frontplate - Stainless Steel
Define® 12 Gang GridPro® Frontplates
FPBN20512 12 Gang GridPro®
FPBS20512 12 Gang GridPro®
FPCH20512 12 Gang GridPro®
FPPN20512 12 Gang GridPro®
FPSS20512 12 Gang GridPro® Frontplate - Stainless Steel
Understanding the code: FP - Plate Style BN - Plate Finish 20509 - Product No. CH Polished Chrome, BN Black Nickel, PN Pearl Nickel, BS Brushed Stainless, SS Stainless Steel.
Standards: BS 5733 Back Box Depth: 47mm Dimensions: 148mm (W) x 207mm (H) x 1.3mm (D)
SNAP TABSFITTING INSIDE
BACK BOX
CLIP-ONMODULES
Define® GridPro® Frontplates
Understanding the code: FP - Plate Style BN - Plate Finish 20518 - Product No. CH Polished Chrome, BN Black Nickel, PN Pearl Nickel, BS Brushed Stainless, SS Stainless Steel.
Define® 18 Gang GridPro® Frontplates
FPBN20518 18 Gang GridPro®
FPBS20518 18 Gang GridPro®
FPCH20518 18 Gang GridPro®
FPPN20518 18 Gang GridPro®
FPSS20518 18 Gang GridPro® Frontplate - Stainless Steel
FPPN20518
Standards: BS 5733 Back Box Depth: 56mm Dimensions: 198mm (W) x 207mm (H) x 1.3mm (D)
SNAP TABSFITTING INSIDE
BACK BOX
CLIP-ONMODULES
GR
IDPR
O®
GR
IDPR
O®
I117
CLICK® WIRING ACCESSORIES
Define® GridPro® Frontplates
Understanding the code: FP - Plate Style BN - Plate Finish 20518 - Product No. CH Polished Chrome, BN Black Nickel, PN Pearl Nickel, BS Brushed Stainless, SS Stainless Steel.
Standards: BS 5733 Back Box Depth: 56mm Dimensions: 198mm (W) x 268mm (H) x 1.3mm (D)
Define® 24 Gang GridPro® Frontplates
FPBN20524 24 Gang GridPro®
FPBS20524 24 Gang GridPro®
FPCH20524 24 Gang GridPro®
FPPN20524 24 Gang GridPro®
FPSS20524 24 Gang GridPro® Frontplate - Stainless SteelSNAP TABS
FITTING INSIDE BACK BOX
CLIP-ONMODULES
Deco® GridPro® Frontplates
Available in 8 finishes, a brand that is
high specification and unprecedented
Decorative Metal Wiring Accessories.
GR
IDPR
O®
GR
IDPR
O®
I119
[email protected] | Call: 01827 63454 | scolmore.com
Deco® GridPro® Frontplates
Deco® 1 Gang GridPro® Frontplates
VPAB20401 1 Gang GridPro®
VPBN20401 1 Gang GridPro®
VPBR20401 1 Gang GridPro®
VPCH20401 1 Gang GridPro®
VPPN20401 1 Gang GridPro®
VPSB20401 1 Gang GridPro®
VPSC20401 1 Gang GridPro®
VPSS20401 1 Gang GridPro® Frontplate - Stainless Steel
Deco® 2 Gang GridPro® Frontplates
VPAB20402 2 Gang GridPro®
VPBN20402 2 Gang GridPro®
VPBR20402 2 Gang GridPro®
VPCH20402 2 Gang GridPro®
VPPN20402 2 Gang GridPro®
VPSB20402 2 Gang GridPro®
VPSC20402 2 Gang GridPro®
VPSS20402 2 Gang GridPro® Frontplate - Stainless Steel
Understanding the code: VP - Plate Style BN - Plate Finish 20401 - Product No. CH Polished Chrome, SC Satin Chrome, BR Polished Brass, BN Black Nickel, PN Pearl Nickel, AB Antique Brass, SB Satin Brass, SS Stainless Steel.
Standards: BS 5733 Back Box Depth: 25mm Minimum Dimensions: 88mm (W) x 88mm (H) x 8mm (D)
VPSS20401
VPPN20402
SCREW-INMODULES
NO YOKE
STANDARD BACK BOX
I118
CLICK® WIRING ACCESSORIES
Deco® GridPro® Frontplates
Deco® 3 Gang GridPro® Frontplates
VPAB20403 ®
VPBN20403 ®
VPBR20403 ®
VPCH20403 ®
VPPN20403 ®
VPSB20403 ®
VPSC20403 ®
VPSS20403 ® Frontplate - Stainless Steel
Deco® 4 Gang GridPro® Frontplates
VPAB20404 4 Gang GridPro®
VPBN20404 4 Gang GridPro®
VPBR20404 4 Gang GridPro®
VPCH20404 4 Gang GridPro®
VPPN20404 4 Gang GridPro®
VPSB20404 4 Gang GridPro®
VPSC20404 4 Gang GridPro®
VPSS20404 4 Gang GridPro® Frontplate - Stainless Steel
Understanding the code: VP - Plate Style BN - Plate Finish 20403 - Product No. CH Polished Chrome, SC Satin Chrome, BR Polished Brass, BN Black Nickel, PN Pearl Nickel, AB Antique Brass, SB Satin Brass, SS Stainless Steel.
Standards: BS 5733 Back Box Depth: 25mm Minimum Dimensions: 146mm (W) x 88mm (H) x 8mm (D)
SCREW-INMODULES
NO YOKE
STANDARD BACK BOX
GR
IDPR
O®
GR
IDPR
O®
I121
[email protected] | Call: 01827 63454 | scolmore.comCLICK® WIRING ACCESSORIES
I120
Deco® GridPro® Frontplates
Deco® 6 Gang GridPro® Frontplates
VPAB20506 ®
VPBN20506 ®
VPBR20506 ®
VPCH20506 ®
VPPN20506 ®
VPSB20506 ®
VPSC20506 ®
VPSS20506 ® Frontplate - Stainless Steel
Deco® 8 Gang GridPro® Frontplates
VPAB20508 8 Gang GridPro®
VPBN20508 8 Gang GridPro®
VPBR20508 8 Gang GridPro®
VPCH20508 8 Gang GridPro®
VPPN20508 8 Gang GridPro®
VPSB20508 8 Gang GridPro®
VPSC20508 8 Gang GridPro®
VPSS20508 8 Gang GridPro® Frontplate - Stainless Steel
Understanding the code: VP - Plate Style BN - Plate Finish 20506 - Product No. CH Polished Chrome, SC Satin Chrome, BR Polished Brass, BN Black Nickel, PN Pearl Nickel, AB Antique Brass, SB Satin Brass, SS Stainless Steel.
Standards: BS 5733 Back Box Depth: 47mm Dimensions: 146mm (W) x 146mm (H) x 8mm (D)
CLIP-ONMODULES
WITH TABSFITTING ON BACK
BOX SURFACE
® Frontplates
Deco® Hotel Accessory GridPro® Frontplates
VPAB31102 ® Frontplate
VPBN31102 ® Frontplate
VPBR31102 ® Frontplate
VPCH31102 ® Frontplate
VPPN31102 ® Frontplate
VPSB31102 ® Frontplate
VPSC31102 ® Frontplate
VPSS31102 ® Frontplate With Twin New Media Aperture - Stainless Steel
Understanding the code: VP - Plate Style BN - Plate Finish 31102 - Product No. CH Polished Chrome, SC Satin Chrome, BR Polished Brass, BN Black Nickel, PN Pearl Nickel, AB Antique Brass, SB Satin Brass, SS Stainless Steel.
Standards: BS 5733 Back Box Depth: Dependent On Modules Fitted Dimensions: 146mm (W) x 88mm (H) x 8mm (D)
SCREW-INMODULES
NO YOKE
STANDARD BACK BOX
See our dedicated New MediaTM section for more information on the range of New MediaTM modules available.
GR
IDPR
O®
GR
IDPR
O®
I122
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Deco® GridPro® Frontplates
Deco® 18 Gang GridPro® Frontplates
VPAB20518 18 Gang GridPro®
VPBN20518 18 Gang GridPro®
VPBR20518 18 Gang GridPro®
VPCH20518 18 Gang GridPro®
VPPN20518 18 Gang GridPro®
VPSB20518 18 Gang GridPro®
VPSC20518 18 Gang GridPro®
VPSS20518 18 Gang GridPro® Frontplate - Stainless Steel
Understanding the code: VP - Plate Style BN - Plate Finish 20506 - Product No. CH Polished Chrome, SC Satin Chrome, BR Polished Brass, BN Black Nickel, PN Pearl Nickel, AB Antique Brass, SB Satin Brass, SS Stainless Steel.
Standards: BS 5733 Back Box Depth: 56mm Dimensions: 196mm (W) x 207mm (H) x 8mm (D)
CLIP-ONMODULES
WITH TABSFITTING ON BACK
BOX SURFACE
Deco® GridPro® Frontplates
Deco® 9 Gang GridPro® Frontplates
VPAB20509 9 Gang GridPro®
VPBN20509 9 Gang GridPro®
VPBR20509 9 Gang GridPro®
VPCH20509 9 Gang GridPro®
VPPN20509 9 Gang GridPro®
VPSB20509 9 Gang GridPro®
VPSC20509 9 Gang GridPro®
VPSS20509 9 Gang GridPro® Frontplate - Stainless Steel
Deco® 12 Gang GridPro® Frontplates
VPAB20512 12 Gang GridPro®
VPBN20512 12 Gang GridPro®
VPBR20512 12 Gang GridPro®
VPCH20512 12 Gang GridPro®
VPPN20512 12 Gang GridPro®
VPSB20512 12 Gang GridPro®
VPSC20512 12 Gang GridPro®
VPSS20512 12 Gang GridPro® Frontplate - Stainless Steel
Understanding the code: VP - Plate Style BN - Plate Finish 20509 - Product No. CH Polished Chrome, SC Satin Chrome, BR Polished Brass, BN Black Nickel, PN Pearl Nickel, AB Antique Brass, SB Satin Brass, SS Stainless Steel.
Standards: BS 5733 Back Box Depth: 47mm Dimensions: 146mm (W) x 206mm (H) x 8mm (D)
CLIP-ONMODULES
WITH TABSFITTING ON BACK
BOX SURFACE
GR
IDPR
O®
GR
IDPR
O®
I124
[email protected] | Call: 01827 63454 | scolmore.comCLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Mode® GridPro® Frontplates
Mode® accessories have been designed and developed as a high
commercial wiring requirement.
®
and developed a
Deco® GridPro® Frontplates
Deco® 24 Gang GridPro® Frontplates
VPAB20524 24 Gang GridPro®
VPBN20524 24 Gang GridPro®
VPBR20524 24 Gang GridPro®
VPCH20524 24 Gang GridPro®
VPPN20524 24 Gang GridPro®
VPSB20524 24 Gang GridPro®
VPSC20524 24 Gang GridPro®
VPSS20524 24 Gang GridPro® Frontplate - Stainless Steel
Understanding the code: VP - Plate Style BN - Plate Finish 20509 - Product No. CH Polished Chrome, SC Satin Chrome, BR Polished Brass, BN Black Nickel, PN Pearl Nickel, AB Antique Brass, SB Satin Brass, SS Stainless Steel.
Standards: BS 5733 Back Box Depth: 56mm Dimensions: 196mm (W) x 268mm (H) x 8mm (D)
CLIP-ONMODULES
WITH TABSFITTING ON BACK
BOX SURFACEMode® wiring accessories are manufactured using Urea
antimicrobial additives that inhibit the growth of infectious
Mode®
shown to have anti-viral properties against enveloped and non-enveloped viruses. After a contact period of 4 hours, Mode®
GR
IDPR
O®
GR
IDPR
O®
I127
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Mode® GridPro® Frontplates
Mode® 6 Gang GridPro® Frontplates
CMA20506 ® Frontplate
Mode® 8 Gang GridPro® Frontplates
CMA20508 8 Gang GridPro® Frontplate - Mode
Standards: BS 5733 Back Box Depth: 47mm Dimensions: 146mm (W) x 146mm (H) x 9mm (D)
CLIP-ONMODULES
WITH TABSFITTING ON BACK
BOX SURFACE
Mode® GridPro® Frontplates
®
Standards: BS 5733 Back Box Depth: 25mm Minimum 31102: Dependent On Modules Fitted Dimensions: 1 Gang: 86mm (W) x 86mm (H) x 9mm (D), 2 Gang: 146mm (W) x 86mm (H) x 9mm (D)
SCREW-INMODULES
NO YOKE
STANDARD BACK BOX
Mode® 1 Gang GridPro® Frontplates
CMA20401 1 Gang GridPro® Frontplate
Mode® 2 Gang GridPro® Frontplates
CMA20402 2 Gang GridPro® Frontplate
Mode® 3 Gang GridPro® Frontplates
CMA20403 ® Frontplate
Mode® 4 Gang GridPro® Frontplates
CMA20404 4 Gang GridPro® Frontplate
Mode® Hotel Accessory GridPro® Frontplates
CMA31102 ® Frontplate With Twin New Media Aperture - White
See our dedicated New MediaTM section for more information on the range of New MediaTM modules available.
GR
IDPR
O®
GR
IDPR
O®
I129I128
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
Mode® GridPro® Frontplates
Mode® 18 Gang GridPro® Frontplates
CMA20518 18 Gang GridPro® Frontplate
Standards: BS 5733 Back Box Depth: 56mm Dimensions: 196mm (W) x 206mm (H) x 9mm (D)
CLIP-ONMODULES
WITH TABSFITTING ON BACK
BOX SURFACE
Mode® GridPro® Frontplates
Mode® 9 Gang GridPro® Frontplates
CMA20509 9 Gang GridPro® Frontplate - Mode
Mode® 12 Gang GridPro® Frontplates
CMA20512 12 Gang GridPro® Frontplate
Standards: BS 5733 Back Box Depth: 47mm Dimensions: 146mm (W) x 206mm (H) x 9mm (D)
CLIP-ONMODULES
WITH TABSFITTING ON BACK
BOX SURFACE
GR
IDPR
O®
GR
IDPR
O®
CLICK® WIRING ACCESSORIES
Part M GridPro® Frontplates
Mode® GridPro® Frontplates
Mode® 24 Gang GridPro® Frontplates
CMA20524 24 Gang GridPro® Frontplate
Standards: BS 5733 Back Box Depth: 56mm Dimensions: 196mm (W) x 266mm (H) x 9mm (D)
CLIP-ONMODULES
WITH TABSFITTING ON BACK
BOX SURFACEPart M wiring accessories are manufactured using Urea
antimicrobial additives that inhibit the growth of infectious
Part Mhave shown to have anti-viral properties against enveloped and non-enveloped viruses. After a contact period of 4 hours, Part M
GR
IDPR
O®
Standards: BS 5733 Back Box Depth: 25mm Minimum Dimensions: 1 Gang: 86mm (W) x 86mm (H) x 9mm (D) 2 Gang: 146mm (W) x 86mm (H) x 9mm (D)
Mode Part M™ 1 Gang GridPro® Frontplates
CMA20401AG 1 Gang GridPro® Frontplate
Mode Part M™ 2 Gang GridPro® Frontplates
CMA20402AG 2 Gang GridPro® Frontplate
Mode Part M™ 3 Gang GridPro® Frontplates
CMA20403AG ® Frontplate
Mode Part M™ 4 Gang GridPro® Frontplates
CMA20404AG 4 Gang GridPro® Frontplate
®
SCREW-INMODULES
NO YOKE
STANDARD BACK BOX
GR
IDPR
O®
Polar GridPro® Frontplates
A premium range of bright white accessories
Polar wiring accessories are manufactured using Urea
antimicrobial additives that inhibit the growth of infectious
Polarhave anti-viral properties against enveloped and non-enveloped viruses. After a contact period of 4 hours, Polar was shown to
off rate against non-enveloped viruses.
GR
IDPR
O®
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
® Frontplates
Polar™ 6 Gang GridPro® Frontplates
PRW20506 ® Frontplate
Polar™ 8 Gang GridPro® Frontplates
PRW20508 8 Gang GridPro® Frontplate - Polar
Standards: BS 5733 Back Box Depth: 47mm Dimensions: 146mm (W) x 146mm (H) x 9mm (D)
CLIP-ONMODULES
WITH TABSFITTING ON BACK
BOX SURFACE
® Frontplates
Standards: BS 5733 Back Box Depth: 25mm Minimum 31102: Dependent On Modules Fitted Dimensions: 1 Gang: 86mm (W) x 86mm (H) x 9mm (D) 2 Gang: 146mm (W) x 88mm (H) x 9mm (D)
31102: 146mm (W) x 86mm (H) x 11mm (D)
®
SCREW-INMODULES
NO YOKE
STANDARD BACK BOX
Polar™ 1 Gang GridPro® Frontplates
PRW20401 1 Gang GridPro® Frontplate
Polar™ 2 Gang GridPro® Frontplates
PRW20402 2 Gang GridPro® Frontplate
Polar™ 3 Gang GridPro® Frontplates
PRW20403 ® Frontplate
Polar™ 4 Gang GridPro® Frontplates
PRW20404 4 Gang GridPro® Frontplate
Polar™ Hotel Accessory GridPro® Frontplates
PRW31102 ® Frontplate With Twin New Media Aperture - White
See our dedicated New MediaTM section for more information on the range of New MediaTM modules available.
GR
IDPR
O®
GR
IDPR
O®
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
® Frontplates
Polar™ 18 Gang GridPro® Frontplates
PRW20518 18 Gang GridPro® Frontplate
Standards: BS 5733 Back Box Depth: 56mm Dimensions: 196mm (W) x 206mm (H) x 9mm (D)
CLIP-ONMODULES
WITH TABSFITTING ON BACK
BOX SURFACE
® Frontplates
Polar™ 9 Gang GridPro® Frontplates
PRW20509 9 Gang GridPro® Frontplate - Polar
Polar™ 12 Gang GridPro® Frontplates
PRW20512 12 Gang GridPro® Frontplate
Standards: BS 5733 Back Box Depth: 47mm Dimensions: 146mm (W) x 206mm (H) x 9mm (D)
CLIP-ONMODULES
WITH TABSFITTING ON BACK
BOX SURFACE
GR
IDPR
O®
GR
IDPR
O®
[email protected] | Call: 01827 63454 | scolmore.comCLICK® WIRING ACCESSORIES
GridPro® FrontplatesA comprehensive selection of metal
are featured in the following pages.
to this attractive range of products.
® Frontplates
Polar™ 24 Gang GridPro® Frontplates
PRW20524 24 Gang GridPro® Frontplate
Standards: BS 5733 Back Box Depth: 56mm Dimensions: 196mm (W) x 266mm (H) x 9mm (D)
CLIP-ONMODULES
WITH TABSFITTING ON BACK
BOX SURFACE
GR
IDPR
O®
GR
IDPR
O®
I141I140
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
® Frontplates
Standards: BS 5733 Back Box Depth: 40mm (Supplied) Dimensions: 146mm (W) x 146mm (H) x 42mm (D) Knockouts: 4 x 20mm, 4 x 25mm (Include 32mm x 67mm rear entry panel)
CLIP-ONMODULES
SNAP TABSFITTING INSIDE
BACK BOX
Metal Clad 6 Gang GridPro® Frontplates with Back Box
CL20506 ®
Metal Clad 6 Gang GridPro® Frontplates with Back Box (No Knockouts)
CL20506B ®
Metal Clad 8 Gang GridPro® Frontplates with Back Box
CL20508 8 Gang GridPro®
Metal Clad 8 Gang GridPro® Frontplates with Back Box (No Knockouts)
CL20508B 8 Gang GridPro®
® Frontplates
Standards: BS 5733 Back Box Depth: 40mm (Supplied) Dimensions: 1 Gang: 80mm (W) x 80mm (H) x 42mm (D) 2 Gang: 140mm (W) x 80mm (H) x 42mm (D) Knockouts: 1&2 Gang: 5 x 20mm 3&4 Gang: 7 x 20mm
SCREW-INMODULES
NO YOKE
STANDARD BACK BOX
Metal Clad GridPro® Frontplates with Back Box no Knockouts
CL20401B 1 Gang GridPro®
CL20402B 2 Gang GridPro®
CL20403B ®
CL20404B 4 Gang GridPro®
Metal Clad GridPro® Frontplates with Back Box
CL20401 1 Gang GridPro®
CL20402 2 Gang GridPro®
CL20403 ®
CL20404 4 Gang GridPro®
Metal Clad Hotel Accessory GridPro® Frontplates
CL31102 ® Frontplate With Twin New
CL31102B ® Frontplate With Twin New
GR
IDPR
O®
GR
IDPR
O®
I142
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
® Frontplates
Standards: BS 5733 Back Box Depth: 56mm (Supplied) Dimensions: 196mm (W) x 206mm (H) x 58mm (D) Knockouts: 3 x 20mm, 9 x 25mm (include 50mm x 102mm rear entry panel)
Metal Clad 18 Gang GridPro® Frontplates with Back Box
CL20518 18 Gang GridPro®
Metal Clad 18 Gang GridPro® Frontplates with Back Box (No Knockouts)
CL20518B 18 Gang GridPro®
SNAP TABSFITTING INSIDE
BACK BOX
CLIP-ONMODULES
® Frontplates
Standards: BS 5733 Back Box Depth: 40mm (Supplied) Dimensions: 146mm (W) x 207mm (H) x 42mm (D) Knockouts: 5 x 20mm, 5 x 25mm (include 32mm x 67mm rear entry panel)
SNAP TABSFITTING INSIDE
BACK BOX
CLIP-ONMODULES
Metal Clad 9 Gang GridPro® Frontplates with Back Box
CL20509 9 Gang GridPro®
Metal Clad 9 Gang GridPro® Frontplates with Back Box (No Knockouts)
CL20509B 9 Gang GridPro®
Metal Clad 12 Gang GridPro® Frontplates with Back Box
CL20512 12 Gang GridPro®
Metal Clad 12 Gang GridPro® Frontplates with Back Box (No Knockouts)
CL20512B 12 Gang GridPro®
GR
IDPR
O®
GR
IDPR
O®
I145I144
Catalogue Main Header 1
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
GridPro® Universal Yokes
GR20400 GridPro®
GR20600 GridPro®
Catalogue Main Header 1
® GridPro® ®
plates, which have their own dedicated inserts.
® frontplates we
® Frontplates
Standards: BS 5733 Back Box Depth: 56mm (Supplied) Dimensions: 196mm (W) x 268mm (H) x 58mm (D) Knockouts: 6 x 20mm, 6 x 25mm (include 50mm x 102mm rear entry panel)
Metal Clad 24 Gang GridPro® Frontplates with Back Box
CL20524 24 Gang GridPro®
Metal Clad 24 Gang GridPro® Frontplates with Back Box (No Knockouts)
CL20524B 24 Gang GridPro®
SNAP TABSFITTING INSIDE
BACK BOX
CLIP-ONMODULES
Standards: BS 5733 Dimensions: 20400: 143mm (W) x 60mm (H) x 8mm (D) 20600: 190mm (W) x 60mm (H) x 8mm (D)
GR
IDPR
O®
GR
IDPR
O®
I147
CLICK® WIRING ACCESSORIES [email protected] | Call: 01827 63454 | scolmore.com
WA20518 WA20524
GridPro® Flush Mounted Back Boxes
WA20518 18 Gang GridPro®
WA20524 24 Gang GridPro®
WA20518 for use with 18 Gang GridPro®
Frontplates.
WA20524 for use with 24 Gang GridPro®
Frontplates.
Standards: BS 5733 Back Box Depth: 56mm Dimensions: WA20518: 185mm (W) x 197mm (H) x 56mm (D) WA20524: 185mm (W) x 255mm (H) x 56mm (D) Knockouts: WA20518: 10 x 20mm, 6 x 25mm WA20524: 10 x 20mm, 6 x 25mm
GR
IDPR
O®
Galvanised Steel Back Boxes
WA512WA518
WA512 WA518
WA512
Gang GridPro®
Frontplates.
WA518 for use with 9 & 12 Gang GridPro®
Frontplates.
Standards: BS 4662 Back Box Depth: 47mm Dimensions: WA512: 137mm (W) x 137mm (H) x 47mm (D) WA518: 137mm (W) x 197mm (H) x 47mm (D) Knockouts: WA512: 7 x 20mmØ, 3 x 25mmØ knockouts WA518: 8 x 20mmØ, 4 x 25mmØ knockouts
I148
CLICK® WIRING ACCESSORIES
NotesG
RID
PRO
®