INTELLIGENT ACCESS CONTROL. TIME & ATTENDANCE SYSTEM

Bioinsec Co., Ltd.

[email protected]

Cadenacio

Biometrics In Security

• Color LCD Color graphic LCD completes stylish design and displays camera images.

• Touchpad Touch keypad makes a semi-permanent operation and good design.• Waterproof Protects from water exposure such as, water flowing down from top or spray.

• Check visitors via video image When a guest pages, access is granted by checking the guest through a door program.

• Connectivity (optional) with internal telephone (key phone). The built-in key phone module allows the simple setup of a connection to internal phone line without the need for separate equipment. It connects to the company’s internal telephone line, allowing a visitor to contact with a relevant party; doors can be opened through a telephone set.

• User voice play Various voice messages can be recorded in the wave format and played after download it through the network. Also, company introduction and informational messages can be recorded.

• RF card reader expandability Two external Wiegand RF readers are controlled from the device without a separate controller.

• Apply DHCP method The DHCP method automatically issues a device IP address

INT

EL

LIG

EN

T A

CC

ES

S C

ON

TR

OL

/TIM

E &

AT

TE

ND

AN

CE

SY

ST

EM

FeaturesBuilt-in remote control function device first in the industry.

• Setting and upgrading the device environment using Ethernet and serial.• Remote console function using telnet.• Firmware upgrading using FTP.• In a case where main firmware encounters a problem, it could be recovered remotely with the auto activation of remote console.• Provides remote service prepared for unexpected errors, so that customers and stores can minimize management costs by reducing travelling expenses.• Convenient operation and time, money saving with the user registration wizard function.• Provides readily available installation environment through installation wizard.• TCO (Total Cost Ownership) enhancement with 8 port ACU function.• Varieties of option selection.

Cadenacio Pro Specification

e-mail:[email protected] / www.bioinsec.com | 04 · 05

CPU 32bit Micro processor, 400MHz Memory NAND Flash 128Mbyte, 64Mbyte RAM Back-up Memory SD Memory 1GbyteLCD 126X64 color LCD Sensor Optic, 500 DPI NTSC camera(option) Built-in camera

Focal length : 3.7mmIris : fixedAngle Of view : 92˚(D)

Proximity Sensor If a user approaches, it switches over from power-saving mode tooperating mode

Size (W)149mm X (L)132mm X (D)52mmFingerprint data size 512 byte User registration 1:1 user : 10,000 persons

1:N user: 5,000 personsRF card : 100,000 personsLog data : 100,000 data

IN/OUT port Input : Door sensor, Lock sensorOutput : Lock relay, Exit button*Interface with I/O MANLock 2 port , Exit button, Fire alarm, Door sensor,Lock sensor, Output 2 port, Spare I/O 5 port

Communication TCP/IP on board, (RS-485, RS-232, Wiegand option card)

Language/Voice Korean/English (Support multi languages)Users can change voice (Supports Wav files only)

Key phone(option) Connectivity with internal telephone (key phone).Power consumption 400mA Built-in RF module Mifare(13.56MHz, ISO14443A), EM(125KHz)Built-in option Camera, KeyphoneOther option I/O MAN

INT

EL

LIG

EN

T A

CC

ES

S C

ON

TR

OL

/TIM

E &

AT

TE

ND

AN

CE

SY

ST

EM

Cadenacio

Biometrics In Security

Cadenacio Fingerprint Cadenacio Card

FP/MF/CAMERA

-Fingerprint-Mifare card(14443 A)-Camera-Color LCD-Touch key-Voice sound-Lock relay

FP/EM/CAMERA

-Fingerprint-Mifare card(14443 A)-EM card(125KHz)-Camera-Color LCD-Touch key-Voice sound-Lock relay

MF/CAMERA

-Mifare card(14443 A)-Camera-Color LCD-Touch key-Voice sound-Lock relay

EM/CAMERA

-Mifare card(14443 A)-EM card(125KHz)-Camera-Color LCD-Touch key-Voice sound-Lock relay

FP/MF

-Fingerprint-Mifare card(14443 A)-Color LCD-Touch key-Voice sound-Lock relay

MF

-Mifare card(14443 A)-Color LCD-Touch key-Voice sound-Lock relay

BKS-4300

Features• Can install various internal/external RF readers Internal: Select EM, MIFARE or HID Prox for internal installation. External: IN/OUT configuration through connecting RF readers of other companies via two Wiegnad Input ports.

• Speed gate interlock Door open time can be set to 1/10 or a minimum 0.5 second increment to interlock with speed gate.

• Install I/O Man for I/O expansion and access door control Operates by a key switching method of I/O Man and BKS-4800 for high security using encrypted data communication; will not activated when connected with other unregistered 4800 devices.

• Parking control system interlock (possible to connect RF reader for parking) Two readers are installed in one device and I/O Man is configured to operate respective relay according readers to enable interlocking with a parking system.

Biometrics In Security

SpecificationCPU

MemoryLCD

SensorSize

Fingerprint data sizeStorage

IN/OUT port

Control portCommunication

Power consumptionOption

32bit Micro processor, 200MHzNAND Flash 32Mbyte, 32Mbyte RAMWatch LCD /User IDTime LCD/ User IDOptic, 500 DPI110 X 139 X 32 (mm)512 ByteFingerprint 1:1 User : 10,000 persons (Two fingerprints per person)1:N User: 2,000 persons (Two fingerprints per person)RF only mode => RF Card : 100,000 personsLog data : 100,000 EA.2 ports for connecting external wigand RF readerInterface via controller (I/O MAN)Lock 2 port , Exit button, Fire alarm,Input 2 port, Output 2 port, Spare I/O 5 portUSB 1.1TCP/IP on board, (RS-485, RS-232, wigand option card)230mARF-reader, Communication card

INT

EL

LIG

EN

T A

CC

ES

S C

ON

TR

OL

/TIM

E &

AT

TE

ND

AN

CE

SY

ST

EM

I/O MAN

Features

Specification

• Easy and convenient installation Complete connection between device and I/O MAN(LAN, power, 485 communication) with a single LAN cable.

• Integral-type box with built-in power supply It is possible to supply power directly from the board of lock device with the system’s built-in power supply. It can also set to switch mode if an external power source is used.

• Security maximization (optional) through use of dual power source Access door will not be opened, even under extreme impact or shock to the device, as device power and lock power are separately controlled.

• Security key settings When used from the outside, no connection will be made in the case of using additional equipment, as it uses cryptographic communication between the device and I/O MAN.

• I/O expandability Configured in two INPUT, two OUTPUT and five spare I/O. Success or failure I/O can be configured respectively where high security is required.

• Network connection TCP/IP is bypassed from device to hub for direct connection.

CPUSizeLED

IN/OUT port

RJ 45Communication

TTL I/OSelectable power

Lock

Internal powerOption

8bit Micro processor / 16Mhz microcontroller145(H)mm X 270(L)mm X 50(D)mm7 status LEDInput : 2 port / Output : 2 portExit button / Fire alarm2 (LAN, terminal connection)Terminal and RS485 communication (remote connection)Auxiliary I/O 5 portsSingle modeDual mode (Second power is exclusively for lock : Power protect circuit )2 lock relay outputsSupporting port of lock power for exclusive use90~220V free voltage , DC12V , 1.5APower, Communication card

e-mail:[email protected] / www.bioinsec.com | 08 · 09

I/O MAN is compatible all Bioinsec recognition products with a controller forinput/output expansion and lock controller.

Bioinsec Co., Ltd.902, 197-17, Ace Techno Tower 1,Guro3-dong, Guro-gu, Seoul, KoreaTel : 82.2.2109.1140 Fax : 82.2.2109.1143http://biokey.en.ec21.comE-mail:[email protected]