Insyabs full duplex technology for wirelessly tethered VR gear

Product Overview

Full-Duplex Wirelessly Tethered Communications for Virtual Reality Gear

Ahmed Bader, [email protected]

+96 654 531 6774 | +96 279 555 8008

©2016

Virtues of Wireless VR

Eliminates wires! Combines the uncontended power of tethered host-based processing with wireless mobility freedom. Allows for a fully-immersive end-user experience.

Insyab Wireless | © 20162

Pictures courtesy www.fipp.com

What is really the challenge?

Latency, latency, latency!Classical wireless communications technologies may well support high bandwidth requirement … however they suffer from inacceptable latencies that end up making users dizzy!

Insyab Wireless | © 20163

StandaloneCompact, stand-alone, fully mobile … but with compromise on VR experience due to limited processing power of the VR headset.

TetheredVR headset tethered to a powerful PC so as to tap into its processing power. However, a cable is a must so as to control latency.

Currently, the VR industry offers one of two options:

Insyab’s differentiated wireless design

• Frequency-separated full-duplex• Switching latency of less than 100µs• Channel bandwidth up to 40 MHz• RF parameters configurable over the air • Support for 2.4 and 5 GHz spectrum bands.• Full-duplex throughput up to 2x120 Mbps• Up to 20 dBm RF transmit power • 50 meters of reach indoors• Turbo decoder offers 5 – 7 dB boost in

receiver sensitivity • Low complexity design: utilizes 50 KLE

FPGA with embedded MCU

Insyab Wireless | © 20164

Supports a circular antenna array. Employs an onboard RF switching circuitry for optimized Rx-to-TX path gains.

More than 7X lower energy consumption factor (nJ/bps/Hz) compared to standards-based gear.

About Insyab

• Based in Dubai – UAE • Positioning: licensor and developer of field-proven technologies for

mission-critical and mission-specific wireless networks • Past and ongoing project:

1. Development of a smartphone add-on wireless networking module for public safety personnel.

2. Development of a battery-powered tri-band wireless M2M access point. Features a full-duplex high-speed backhaul capability.

3. A wireless mobile full-duplex repeater for coverage extension in mission-critical applications.

Insyab Wireless | © 20165

Value Proposition• Shorter time-to-market.• Competitive pricing and flexible costing models.• One-stop shop for the whole project thus eliminating risk and further reducing

NRE costs.

Team

Insyab Wireless | © 20166

Mohamed Tlich

Télécom ParisTech (PhD)

Experience: Orange R&D

Mohamed-Slim AlouiniCaltech (PhD), Georgia-Tech (MS)Faculty positions: KAUST, Texas A&M, Uni. of Minnesota

Co-Founder

Slim Souissi

Georgia-Tech (PhD)

Past: COO, Novatel Wireless

Advisor

Dev. Partner

Advisor

Zaid MasriOxford (MBA)

Experience: Capital Bank, Arab Bank Invest

Co-Founder, Managing Director

Ahmed Bader

Télécom ParisTech (PhD), OSU (MS)

Experience: Emerson (UAE),

Siemens (Germany)

Wireless technology that matters

PO Box 1961 Deira Dubai – UAE

www.Insyab-Wireless.com

Insyab Wireless | © 20167