1. Closing the mold Close the mold starting from one end. Pull the closing tab down with one hand and close the mold openning with the other hand (FIGURE 1).Then, push the tab up and hold it with the thumb. Finally, continue pushing the tab along the mold to the other end (FIGURE 2). Watch our VIDEO DEMONSTRATION http://www.withheartandstar.com/how_to_use 2. Placing the mold Choose a small growing fruit and put the mold on it, so that the fruit completely remains into it. The mold has a little hole at each end, use a wire or a thread to fasten the mold to the plant. Adjust the length of the thread or wire so that the fruit is completely inside the mold. 3. Growing the fruit Once you reach this step, you just have to wait for the fruit to grow. Some fruits like cucumber grow very fast and takes only 5-6 days to fill the mold. Other fruits such as tomatoes will take a few weeks. Since the mold is transparent you can see every day as the fruit grows and fills the mold. 4. Heart and star shaped fruit harvest Once the fruit has taken the shape of the mold, you can already make your harvest. Remove the mold clamping and cut the stem of the fruit. Release the clouser of the mold starting at one end (FIGURE 1). Slightly open the mold (FIGURE 2) and the fruit will come out easily by the end of the mold (FIGURE 3). Now you can reuse the mold to shape other fruits from your garden. http://www.withheartandstar.com http://www.zayintec.com [email protected] Zayin Technology S.L. – University of Almería campus – Pita building. Office 10 – 04120 Almería (Spain) – Tel.: 0034 950 214370 1 2 1 2 3
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1. Closing the mold
Close the mold starting from one end. Pull the closing tab down with one hand and close the mold openning with the other hand (FIGURE 1).Then, push the tab up and hold it with the thumb. Finally, continue pushing the tab along the mold to the other end (FIGURE 2). Watch our VIDEO DEMONSTRATION http://www.withheartandstar.com/how_to_use
2. Placing the mold
Choose a small growing fruit and put the mold on it, so that the fruit completely remains into it. The mold has a little hole at each end, use a wire or a thread to fasten the mold to the plant. Adjust the length of the thread or wire so that the fruit is completely inside the mold.
3. Growing the fruit Once you reach this step, you just have to wait for the fruit to grow. Some fruits like cucumber grow very fast and takes only 5-6 days to fill the mold. Other fruits such as tomatoes will take a few weeks. Since the mold is transparent you can see every day as the fruit grows and fills the mold.
4. Heart and star shaped fruit harvest Once the fruit has taken the shape of the mold, you can already make your harvest. Remove the mold clamping and cut the stem of the fruit. Release the clouser of the mold starting at one end (FIGURE 1). Slightly open the mold (FIGURE 2) and the fruit will come out easily by the end of the mold (FIGURE 3). Now you can reuse the mold to shape other fruits from your garden.
http://www.withheartandstar.com http://www.zayintec.com [email protected]
Zayin Technology S.L. – University of Almería campus – Pita building. Office 10 – 04120 Almería (Spain) – Tel.: 0034 950 214370
1 2
1 2 3
Related Documents
