www.c-racer.com INSTRUCTION Model Product Code Royal Enfield Interceptor 650 Royal Enfield Continental GT 650 MCR-RE-CR CONTENTS 1 / 2 Mask Café Racer 1-2 3 You are advised to read the instructions carefully, before you proceed to any changes. Any modifications on your motorcycle should be performed by specialized personnel, however the installation process of this product is quite easy if you follow the instructions below. 1 X Plastic Mask 1 X Windshield (plexi) 2 X 2 X 2 Χ screws Μ6Χ10 (allen) 4 Χ screws Μ6Χ15 (allen-round head-washer) 5 Χ screws Μ4Χ12 (allen-round head-washer) washer) washer metallic plate (inox L-RE-MCRCR1 Pair) metallic plate (inox L-RE-MCRCR2 Pair) 4 5 Χ safety nuts Μ4 ( X Μ6 clip nuts 2 X M6x18 (adapter) 2 X 6x12 Unscrew the front end nuts that hold together the meter instruments, and in their position use the (Μ6Χ18) adaptors – as shown in the above photos 1 & 2. Clip the clips as shown in the left hand photo. Have a look on the next page to see how and where to place the metallic plates – we place them at the back of each metallic plate in the square hole. You may need to push them a bit harder on the sides so that they clip firmly. If in the installation package the gelatin is not already placed on the mask, you will need to do it, using the small nuts and screws that you will find inside the package.