installing and using this product. PureSpa™SSP-10 · PDF fileOWNER’S MANUAL PureSpa™SSP-10 IMPORTANT SAFETY RULES Read, understand, and follow all instructions carefully before

192PO

(192PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 04/18/2013

English

OWNE

R’S

MANU

AL PureSpa™ SSP-10

IMPORTANT SAFETY RULESRead, understand, and follow

all instructions carefully before installing and using this product.

192-*PO-R1-1304

Do not forget to try these other fine Intex products: pools, pool accessories, in-home toys, airbeds and boats available at fine retailers or visit our website.Due to a policy of continuous product improvement, Intex reserves the right to change specifications and appearance, which may result in updates to the instruction manual, without notice.

For illustrative purposes only.

IMPORTANT!DO NOT RETURN PRODUCT TO STORE

To purchase parts and accessories or to obtain non-technical assistance, visit

www.intexcorp.comFor technical assistance and missing parts call us toll-free (for U.S. and Canadian Residents):

1-800-234-6839Monday through Friday, 8:30am to 5:00pm Pacific Time

192PO

S AVE THESE INSTRUCTIONS


English

Page 2

Warning.......................................................................................... 3-4

Parts............................................................................................... 5-6

Set-up............................................................................................. 7-10

Operation....................................................................................... 11

LED Code Chart............................................................................. 12

Maintenance and Chemicals........................................................ 13-15

Storage........................................................................................... 15

Troubleshooting............................................................................ 15

Warranty......................................................................................... 16

TABLE OF CONTENTS

192PO



English

Page 3

IMPORTANT SAFETY RULESWhen installing and using this electrical equipment, basic safety precautions should always be followed, including the following.

READ AND FOLLOW ALL INSTRUCTIONS

• RiskofAccidentalDrowning.Extremecautionmustbeexercisedtopreventunauthorizedaccessby children.Toavoidaccidents,ensurethatchildrencannotusethisspaunlesstheyaresupervisedatall times.• Riskofdrowning.Inspectthespacoverregularlyforleaks,prematurewearandtear,damage,orsignsof deterioration.Neveruseawornordamagedcover:itwillnotprovidethelevelofprotectionrequiredto preventunsupervisedaccesstothespabyachild.• Riskofinjury.Replacedamagedcordimmediately.Donotburycord.Connecttoagrounded,grounding type receptacle only.• RiskofInjury.Thesuctionfittingsinthisspaaresizedtomatchthespecificwaterflowcreatedbythe pump.Shouldtheneedarisetoreplacethesuctionfittingsorthepump,besurethattheflowratesare compatible.• Toreducetheriskofinjury,donotremovethesuctionfittings.Neveroperateaspaorhottubifthesuction fittingsareloose,broken,damaged,crackedormissing.Replaceimmediately.Neverreplaceasuction fittingwithoneratedlessthantheflowratemarkedontheoriginalsuctionfitting.• Toreducetheriskofdrowningfromhairandbodyentrapment,installasuctionfitting(s)withamarkedflow ratethatequalsorexceedstheflowratemarkedontheequipmentassembly.• Makesurethepoweroutletcurrentandvoltageissuitablefortheelectricalequipment.• RiskofElectricShock.Installatleast5feet(1.5m)fromallmetalsurfaces.Asanalternative,aspamay beinstalledwithin5feet(1.5m)ofmetalsurfacesifeachmetalsurfaceispermanentlyconnectedbya minimum8AWG(8.4mm2)solidcopperconductortothewireconnectorontheterminalboxthatis providedforthispurpose.• RiskofElectricShock.Donotpermitanyelectricappliance,suchasalight,telephone,radio,ortelevision, within5feet(1.5m)ofaspaorhottub.• RiskofElectricShock.Donotusethespawhenitisraining,thunderingorlightning.

• Awireconnectorisprovidedonthisunittoconnectaminimum8AWG(8.4mm2)solidcopperconductor between this unit and any metal equipment, metal enclosures of electrical equipment, metal water pipe, or conduitwithin5feet(1.5m)oftheunit.• Toreducetheriskofdrowningandinjury,donotpermitchildrentousethisproductunlesstheyareclosely supervisedatalltimes.• Toreducetheriskofchilddrowning,attachandlockspacoveraftereachuse.• Toreducetheriskofdrowningandinjury:a)Neverusethespaaloneorallowotherstousethespaalone.b)Beforeenteringaspaorhottub,theusershouldmeasurethewatertemperaturewithanaccurate thermometersincethetoleranceofwatertemperature-regulatingdevicesvaries.c)Thewaterinaspashouldneverexceed104°F(40°C).Watertemperaturesbetween100°F(38°C)and 104°F(40°C)areconsideredsafeforahealthyadult.Lowerwatertemperaturesarerecommendedfor youngchildrenandwhenspauseexceeds10minutes.d)Pregnantandpossiblepregnantwomenshouldconsultaphysicianbeforeusingaspaorhottub.e)Sinceexcessivewatertemperatureshaveahighpotentialforcausingfetaldamageduringtheearlymonths ofpregnancy,pregnantorpossiblypregnantwomenshouldlimitspawatertemperaturesto100°F(38°C). Donotstayinspaforlongerthan10minutes.f) Theuseofalcohol,drugs,ormedicationbeforeorduringspausemayleadtounconsciousnesswiththe possibility of drowning.g)Obesepersonsandpersonswithahistoryofheartdisease,loworhighbloodpressure,circulatorysystem problems, or diabetes should consult a physician before using a spa.h)Personsusingmedicationshouldconsultaphysicianbeforeusingaspasincesomemedicationmay induce drowsiness while other medication may affect heart rate, blood pressure, and circulation.i) Checkwithadoctorbeforeuseifpregnant,diabetic,inpoorhealth,orundermedicalcare.

DANGER

WARNING

192PO



English

Page 4

j) Exitimmediatelyifuncomfortable,dizzy,orsleepy.Spaheatcancausehyperthermiaandunconsciousness. Theuseofalcohol,drugs,ormedicationcangreatlyincreasetheriskoffatalhyperthermia.Thecauses, symptoms,andeffectsofhyperthermiamaybedescribedasfollows: Hyperthermiaoccurswhentheinternaltemperatureofthebodyreachesalevelseveraldegreesabovethe normalbodytemperatureof98.6°F(37°C).Thesymptomsofhyperthermiaincludeanincreaseinthe internaltemperatureofthebody,dizziness,lethargy,drowsiness,andfainting.Theeffectsofhyperthermia includefailuretoperceiveheat;failuretorecognizetheneedtoexitspaorhottub;unawarenessof impendinghazard;fetaldamageinpregnantwomen;physicalinabilitytoexitthespaorhottub;and unconsciousness resulting in the danger of drowning.• Peoplewithinfectiousdiseasesshouldnotuseaspaorhottub.• Toavoidinjuryexercisecarewhenenteringorexistingthespaorhottub.• Alwaysaddchemicalstowater,neveraddwatertochemicals.Addingwatertochemicalsmaycause strongfumesorviolentreactionsandhazardouschemicalspray.• Neverjumpordiveintoaspaoranyshallowbodyofwater.• Assemblyanddisassemblybyadultsonly.• Alwaysunplugthisproductfromtheelectricaloutletbeforeremoving,cleaning,servicingormakingany adjustmenttotheproduct.• Theplugmustbeaccessibleafterproductisinstalled.• Donotburytheelectricalcord.Locatethecordwhereitwillnotbedamagedbylawnmowers,hedge trimmers and other equipment.• Ifthesupplycordisdamaged,itmustbereplacedbyaqualifiedelectricianinordertoavoidahazard.Use onlyidenticalreplacementpartswhenservicing.• Toreducetheriskofelectricshock,donotuseextensioncords,timers,plugadaptorsorconverterplugsto connectunittoelectricalsupply;provideaproperlylocatedoutlet.• Donotattempttopluginorunplugthisproductwhilestandinginwaterorwhenyourhandsarewet.• Donotleavethespaemptyforextendedperiodoftime.Donotexposethespaunderdirectsunshine.• Adequatedrainagesystemmustbeprovidedaroundthespatodealwithoverflowwater.• Donotallowthewaterinthespatofreeze.Donotturnonthespawhenthewaterisfrozen.• Donotusethespaifdamagedindeliveryand/ormalfunctioninginanyfashion.ContacttheIntexservice center for further direction.• Neverpourwaterwithatemperaturehigherthan104°F(40°C)intothespadirectly.• Keepallpetsawayfromspatoavoidanydamage.• Donotaddbathoilorbathsalttothespawater.

WARNING

CAUTION• Maintainwaterchemistryinaccordancewithmanufacturer’sinstructions.

• ThisproductisprovidedwithaGFCI/RCDlocatedattheendofthepowercord.TheGFCI/RCDmustbe testedbeforeeachuse.DonotusethespaiftheGFCI/RCDdoesnotfunctionproperly.Disconnectthe powercorduntilthefaulthasbeenidentifiedandcorrected.Contactaqualifiedelectriciantocorrectthe fault.DonotbypasstheGFCI/RCD.TherearenoserviceablepartsinsidetheGFCI/RCD.Openingthe GFCI/RCDwillvoidthewarranty.

1. Plugthepowercordintoagroundedelectricalsocket.2. Press the RESETbuttonontheGFCI/RCD. 3. Turn on the spa electrical equipment.4. Press the TESTbuttonontheGFCI/RCD. TheGFCI/RCDindicator shouldturnoffandtheelectricalequipmentshouldshutoff.Ifthe GFCI/RCDindicatordoesnotturnoff,andtheelectricalequipment doesnotshutoff,theGFCI/RCDisfaulty.Donotusethespa. Contactaqualifiedelectriciantocorrectthefault.5. Press the RESETbuttonontheGFCI/RCD.Theindicatoron theGFCI/RCDshouldturnon.IftheGFCI/RCDindicatordoes notturnon,theGFCI/RCDisfaulty.Donotusethespa. Contactaqualifiedelectricianimmediatelytocorrectthefault.

WARNING

RESET

TEST

RESET

TEST

RESET

TEST

RESET

TEST

RESET

TEST

RESET

TEST

192PO



English

Page 5

PARTSBeforeassemblingyourproduct,pleasetakeafewminutestocheckthecontents

and become familiar with all the parts.

NOTE:Drawingsforillustrationpurposeonly.Actualproductmayvary.Nottoscale.

8910

11

18

17

19

20 21 2322

1

2

67

3

4

5

121314

15

16

24

192PO



English

When ordering parts, be sure to quote the model number and part numbers.

PARTS (continued)Beforeassemblingyourproduct,pleasetakeafewminutestocheckthecontents

and become familiar with all the parts.

Page 6

REF. NO. DESCRIPTION QTY. PART NO.

1 CONTROLBASE 1 11685

2 CONTROLBASEBACKCOVER 1 11719

3 CONTROLPANEL(INCLUDED#4&#5) 1 11737

4 CONTROLPANELBOLT 3 11024

5 CONTROLPANELCAP 1 11740

6 CONTROLPANELBOLTWRENCH 1 11053

7 SPA/COVERINFLATIONHOSE 1 11714

8 SPACONTROLINLET/OUTLETO-RING 2 11699

9 SPACONTROLAIRINLETO-RING 1 11687

10 SPADRAINPLUG 1 11696

11 SPADRAINVALVEADAPTOR 1 11713

12 FILTERCARTRIDGEHOUSING 2 11691

13 FILTERCARTRIDGE 2 11692

14 FILTERCARTRIDGEHOUSINGLID 2 11693

15 INLET/OUTLETPLUG 3 11739

16 SPATUB 1 11697

17 SPACOVER 1 11690

18 SPACOVERINFLATABLEBLADDER(PRE-INSTALLEDINSPACOVER) 1 11689

19 GROUNDCLOTH 1 11717

20 CHEMICALDISPENSER 1 10883

21 THREEWAYTESTSTRIPS 1 19635

22 WRENCH 1 11742

23 PRESSUREGAUGE 1 11741

24 SUCTIONFITTING 3 11695

SPA SUCTION FITTINGSelf-containedspafittings.–Formultipleoutletuseonly.–Wallmountingonly.Replacesuctionfittingswithin3installedyear.–Toolrequired:screwdriver.

Spasuctionfittingmaximumflowrate:8.5gpm(510gph)

• Checksuctionstrainerfittingandfastenersfordamageortamperingbeforeeachuseofthespa.• Forserviceandwinterizationinstructionsreferto“Maintenance”and“Storage”sections.• Readandfollowallinstructions,savetheseinstructionsforfuturereference.

192PO



English

Site preparation and requirements• Thespacanbeinstalledindoororoutdoor.Forhouseholduseonly.• Thespamustbesetuponalevel,flatandsmoothsurfacethatiscapableofsupportingthemaximumload ofthefilledspawithfouradultoccupants;weight2500lbs(1136Kg).• Makesuretheareaisfreeofsharpobjectsunderoraroundthespa.• Provideadequatedrainagesystemaroundthespatodealwithoverflowwaterandsplashes.• Provideaproperlylocatedpoweroutlettoconnectthespaandalloweasyaccessforperiodictestingofthe cordmountedGFCI/RCD.• Makesurethereisenoughclearancearoundthespaforfullaccesstothespaequipmentformaintenance and/orservice.• Theareashallfacilitatedrainingpurposesduringlongtermspastorage.

Additional requirements for indoor installation• Makesurethefloorcansupportthefullweightofthefilledspawiththemaximumnumberofoccupants. Checkwithaqualifiedcontractororastructuralengineertoverifythisrequirement.• Makesuretheflooriswaterresistantandnon-slipsurface.Donotinstallthespaoncarpetorother materials that will be damaged by moisture, condensation.• Donotinstallthespaindoorsonasecondfloorabovefinishedlivingspaceduetothepossibilityofwater and humidity damage.• Humidityisanaturalsideeffectofindoorspainstallation.Theroomshallbeproperlyventilatedtoallow moisturetoescape.Installaventilatingsystemtopreventexcesscondensation,moistureintheroom.

Additional requirements for outdoor installation• Spaownersmayneedtocomplywithlocalorstateslawsrelatingtochildprooffencing,safetybarriers, lighting,andothersafetyrequirements.Contactyourlocalbuildingcodeenforcementofficeforfurther details.• Makesurethesurfaceislevel,flat,smoothandstrongenoughtosupportthefullweightofthefilledspa.• Donotsetupthespaongrassordirt,asthisincreasestheamountofdebrisenteringthespa,anddamage thespafloor.• Donotexposethespatodirectsunlightforextendedperiodoftime.• Itispossibletoinstallandleavethespaoutsideatatemperaturenotlowerthan39°F(4°C)providedthe watertemperatureinsidethespaishigherthan39°F(4°C)andthewaterinsidethecirculationsystem, pump,pipearenotfrozen.Puta“tempbarriermat”betweenthespafloorandthegroundtopreventheat lossfromthebottomofthespaandtoprovidebetterheatretention.

Page 7

PRODUCT SPECIFICATIONS

SET UP

Maximumseatingcapacity: 4adultsWatercapacity: 210gal(795L)Inner/outerdiameter: 58/75in(147/191cm)Height: 28in(71cm)Bubbleairblower: 0.9HP/110-120V/60HzFilterpumpflowrate: 400gal/hr(1,514L/hr)Heaterpower: 1,300Watts/110-120V/60HzTemperaturerange: 68ºF–104ºF(20ºC–40ºC)Temperaturerise: 2-3ºF/hr(1-1.5ºC/hr)NumberofBubbleJets: 120Spatubrecommendedworkingairpressure: 0.083bar(1.2psi)

Cord-connectedspawithpump,heater,blowerandcontrolpanel.

192PO



English

SET UP (continued)

Setup the spa with at least 2 persons.1. Movetheentirepackagetotheselectedsite.Donotdragthespatubacrossthegroundasthiscan causedamageandleakage. Open the carton carefully as this carton can be used to store the spa during long term storage or when not in use.2. Layoutallthepartsonthegroundandmakesureallthepartsareaccountedfor. Formissingor damagedpartscontacttheappropriateIntexServiceCenterlistedintheseparate“Authorizedservice Centers”sheet.

Safety Sign Card PostingTheSafetySigncardincludedwiththemanualshallbepostedinanareavisibletotheusersofthespatoalertthemofthesafetyrulesandwarnings.Forreplacementofthesafetysigncard,visitourwebsiteatwww.intexcorp.comforadditionalprintcopies.Laminatetheprintedsafetysigncopyforprotectionfromtheelements.

Spa Control Unit Assembly1. Connectthecontrolpanel(3) cable plug into the receptacle on top of the spa control base (see drawing 1).2. Screw the control panel bolts (4)withtheprovidedboltwrench(6) to secure the control panel (see drawing 2).3. Plug the spa control unit into a grounded electrical outlet.

Page 8

InflationInflate the Spa Tub Wall1. Takeoutthegroundcloth(19)andspreaditovertheclearedarea.Thenspreadoutthespa linerover the ground cloth andpointthedrainvalvetowardsasuitabledrainingarea.2. Unscrewthecontrolpanelcap(5)ontopofthecontrolpaneltorevealtheairblowerinflationoutletand connectoneendoftheinflationhose(7) to the outlet (see drawing 3).3. Unscrewtheairvalvecaptorevealthestemintheuppositionforinflation.Inserttheotherendofthe inflationhose(7)intothevalveandturntotherighttolockitinposition (see drawing 4).

7

57

1 23 4

1

3

4

6

2

192PO



English

Page 9

SET UP (continued)

4. Pressthebuttontoinflatethespatubwalluntilitisfirmtothetouchbutnothard(see drawing 5). IMPORTANT:Donotoverinflateorusehighpressureaircompressortoinflate.5. Press the button again to turn it off.6. Disconnecttheinflationhose(7) fromtheairvalveandattachthepressuregauge(23) totheairvalve. Thepressuregaugeindicatorshouldbeinthegreenareaforaproperlyinflatedspatub(see drawing 6).Repeatpreviousstepstoaddmoreairifnecessary.

7. Replacetheairvalvecapback. NOTE: Thecapisdesignedtobescrewedonandoff.Neverexertforceasthiscouldcausethe completeinternalinflationsystemofthevalvetocomeloose.See“SpaTubAirValveFastening”for valvemaintenance.

Inflate the Spa Cover Air Bladder1. Opentheinflationvalveandinserttheinflation hose (7)intothevalve;presstoinflate untilitisfirmtothetouchbutnothard(see drawing 7).2. Disconnecttheinflationhose(7) from the air blowerinflationoutletandthevalve.3. Replace the control panel cap (5) back;closeand recesstheinflationvalve.

NOTE: Ifthereisaneedtoaddsomeairtothespatubwallorspacoverairbladderaftertheyhavebeensetup,refertoabove“InflatetheSpaTubWall”and“InflatetheSpaCoverAirBladder”sections.

DeflationFor Spa Tub Wall:1. Unscrewthecaptorevealthestem,pushthestem in and turn 90 degree right to secure it in the down position (see drawing 8).2. Oncethedeflationiscompleted,pushthestemin andturn90degreelefttoreturnittotheinflation position.3. Replacethecapback.

For Cover Air Bladder:1. Pullvalvecapoutandsqueezethevalveatitsbase untildeflated.2. Closeandrecessthevalveback.

8

˚C˚F

RESET

104 Fo˚C

˚F

RESET

104 Fo

˚C˚F

RESET

104 Fo7

7

5 60.01

0.02

0.03

0

12 3

4

50

psi

MPa

23

˚C˚F

RESET

104 Fo

192PO



English

Page 10

SET UP (continued)

Spa Control Unit Installation1. Press the button located on top of the control base andremovethebackcover(see drawing 9)2. Connectthespacontrolunittothespatub(see drawing 10). Hand-tighten the connectors securely. Donotusetoolstotighten.3. Reinstallthebackcover (2) to the spa control base (see drawing 11). Backcovermustbeinstalled beforeusingtheSPA. CAUTION: Donotsit,lean,coverorplaceanyobjectsoverthespacontrolunit.

4. Attachthetwofiltercartridgehousingassembliestothetwooutlet gridsontheinsideofthespa(lowerposition,marked“C”). ATTENTION! Inordertocomplywiththerequirementsofthe VirginiaGrahameBakerAct,suctionoutletscannotbecovered whilethespaisinuse.TheActwasintendedtoaddresshigh suction/volumecirculationsystemsbutdoesnotexcludelow volumesystemsasusedonthisspa.Accordingly,removethefilter cartridge assemblies and any other spa cleaning attachment from the spa outlets before spa usage (see drawing 12). Re-attachthemafterusageforwaterfiltrationandcleaning.5. Beforefillingwithwaterensurethebottomdrainvalvecapsare securely closed on the inside and outside.6. FillthespatubwithfreshwatertoalevelbetweenMINandMAX markedontheinsideofthespawall.Donotoverfillthespa.. WARNING: Neverpourwaterwithatemperaturehigherthan104°F(40°C)intothespadirectly.Itis recommendedtofillthespatubwithlukewarmwaterforquickheatingandenergysaving.7. Placethespacoverandspaairbladder(pre-installedinspacover)overthespatub,andmakesurethe spacoverbucklesarelockedusingthekeyprovidedafterpullingthebuckledstrapstight. IMPORTANT:Inspectthespacoverregularlyforleak,prematurewearandtearordeterioration.Never useadamagedspacover.8. Turnontheheateronthespacontrolunitsee“SpaControlUnitPanel”operatinginstructionssection. Theheatingsystemiscapableofincreasingthewatertemperaturebyapproximately2-3ºF(1-1.5ºC) per hour.

11

2

10

A

B

C

B

CA

9

Press

A

B

C

B

CA

12

C

192PO



English

Page 11

OPERATION

SPA CONTROL UNIT PANEL

Heat Button: Use this button to activate the heating system. The pump will heat the spa water until the water temperature reaches the set temperature. After the current water temperature drops 2°C (3.6°F) below the set temperature the heating system will restart. When the light above the heat button is red, the heating system is activated. When the light is green, the water is at the set temperature and the heating system is at rest. NOTE: If the heating system is activated the fi ltration system will automatically start. NOTE: After turning off the heating system the fi ltration system will continue to operate 24 hours.

Celsius/Fahrenheit Toggle button: The temperature can be displayed in either Fahrenheit or Celsius. The system’s default is Celsius. CAUTION: NEVER use the spa if indicated water temperature is more than 104ºF (40°C).

Temperature Adjustment Buttons: Pressing the Temperature Increase or Decrease buttons will cause the LED to fl ash. When fl ashing you can adjust to the desired temperature setting. If you hold these buttons down the values will rapidly increase or decrease. The new and desired temperature setting will remain on the LED display for 5 seconds to confi rm the new value. NOTE: The default temperature is 68°F (20°C). NOTE: Temperature adjustment ranges from 68°F (20°C) to 104°F (40°C).

Reset Button: Pressing the Reset button when Code “E95” appears on the LED display control panel.

Water Filter Button: This button turns the fi lter pump on and off. The light above the Water Filter Button displays green when activated.

Bubble Button: Use this button to activate the massage system, which has a 30-minute auto-shutoff feature. The light above the Bubble Button displays green when activated. WARNING: Do not run Bubble system when the cover is attached, air can accumulate inside the spa and cause irreparable damage and bodily harm.

LED Display: Once powered-up the LED displays the current water temperature automatically.

A: Heat Button B: Celsius/Fahrenheit Toggle ButtonC: Temperature Increase Button D: Temperature Decrease ButtonE: Reset ButtonF: Water Filter ButtonG: Bubble ButtonH: LED Display

˚C˚F

RESET

104 FoG

F

DCE

B

AH

RESET

˚C˚F

IMPORTANT: The following conditions will lead to slow water heating:• The ambient temperature is lower than 50ºF (10ºC).• Outdoor wind speed is above 8-12 mph (3.5-5. 4m/s).• The air bubble function is activated when heating the spa water.• The spa is not properly covered with the spa cover when the water is heating.

F104o

192PO



English

Page 12

LED CODE CHART

E90 Nowaterflow

• Ensuretheunitispluggedandswitchon.• Ensuretheoutletcovergridiscleanandfree from obstructions.• Cleanorreplacethecartridge,seeMaintenance and Storage section.• Ensurethein/outletconnectionsonthespatubandfilterpumparenotblocked.• Ifproblempersists,contactIntexServiceCenter.

E94 Water temperature too low

• Iftheambienttemperatureisbelow39°F(4°C), we recommend not to use the spa.• Press the temperature increase button to set the desired water temperature.• Ifproblempersists,contactIntexServiceCenter.

E95 Water temperature too high

• Press the temperature decrease button to lower the water temperature.• Whenthewaterhascooleddownto104°F(40°C),presstheRESETbutton.• Ifproblempersists,contactIntexServiceCenter.

E96 SystemError• UnplugandplugtheGFCI/RCD.• Ifproblempersists,contactIntexServiceCenter.

END

After72hoursofoperation,the pump will hibernate and the rapid heating and water

filtrationfunctionsaredisabled.

• Pressthewaterfilterbuttontore-activethefilterpump.

LED Reading CAUSE SOLUTION

192PO



English

Page 13

MAINTENANCE AND CHEMICALS

Water SanitationThespaownermustregularlycheckandkeepthespawatersanitizedwithscheduledmaintenance(daily,ifnecessary).Addingsanitizerandotherchemicalwillcontrolbacteriaandvirusespresentinthespawater.Themaintenanceofaproperwaterbalancethroughappropriateuseofsanitizersisthesinglemostimportantfactorinmaximizingthelifeandappearanceofthespatubaswellasensuringclean,healthyandsafewater.Propertechniqueisimportantforwatertestingandtreatingthespawater.Seeyourpool/spaprofessionalforchemical,sanitizer,testkitsandtestingproceduresquestions.CATUTION: ALWAYSFOLLOWTHECHEMICALMANUFACTURER’SDIRECTIONS,ANDTHEHEALTHANDHAZARDWARNINGS.

Do not add chemicals if the spa is occupied. This can cause skin or eye irritation.Concentratedchlorinesolutionscandamagethespatub.InnoeventisIntexRecreationCorp.,IntexDevelopmentCo.Ltd.,theirrelatedcompanies,authorizedagentsandservicecenters,retailersoremployeesliabletothebuyeroranyotherparty for costs associated with the loss of spa water, chemicals or water damage.

Maintenance of Spa Water and CartridgeProtectallthespaoccupantsfrompossiblewater-relatedillnessesbykeepingthespawatercleanandsanitized.Alwayspracticegoodhygiene.Toensureproperspawaterqualityfollowtheseprocedures:1. Inspectandcleanthefiltercartridgeonceaweek,andchangethefilter cartridge as needed. a. Unscrewthecartridgehousingassemblyfromthespatubwalland removethecartridge(see drawing 13). b. Useagardenhosetorinseoffthecartridge.Ifthecartridgeremains soiledanddiscoloreditshouldbereplaced.Keepsparecartridges on hand. c. Reinstallthecleancartridgebackintothecartridgehousingand replacethecartridgehousingassemblybackontothespatubwall.2. Changethespawaterevery2~3months,oritbecomescloudyandproper waterchemistrydoesnotclearitup.See“SpaTubDrainage”and“Spa TubCleaning”sectionsfordetails.3. Usespachemicalstomaintainproperwaterchemistry.Spadamage resulting from misuse of chemicals and mismanagement of spa water isnotcoveredbythewarranty.4. Alloccupantsmustshowerbeforeenteringthespa.

Water Chemistry BalanceMaintainthespawaterpHlevelbetween7.2and7.8,totalalkalinitylevelbetween80and120ppmandfreechlorinelevelbetween3to5ppm.Usetheincluded3-wayteststripstotestthespawaterchemistrybeforeeachuseofthespaandcontinuetotestthewaternolessthanonceaweek.The3-WayTestStripscantestthe“FreeChlorine”,“pH”,and“TotalAlkalinity”levelsatthesametime:1. Diptheentirestripintothewaterandremoveimmediately.2. Holdthestriplevelfor15seconds.Donotshakeexcesswaterfromthestrip.3. Comparethestrippadtothecolorchartonthepackaginglabel.Ifnecessary,adjustthechemicallevel in the pool water.NOTE:Checktheexpirydateofthetestkitasthetestresultsmaybeinaccurateifthekitisusedafterthatdate.LowpHwilldamagethespatubandpump.Damageresultingfromchemicalimbalanceisnotcoveredbythewarranty.Usetheincludedchemicalfloaterdispensertoadministerchlorine[chemicaltabletsize:lessthan1.5”(3.8cm)diameter]intothespawater.Alwaysfollowthechemicalmanufacturer’sdirections.Removethechemicalfloaterdispenser when the spa is in use.Neverletchlorinecomeincontactwiththespatubifitisnotcompletelydissolved.Likewisewithliquidchlorine;mixitimmediatelyandthoroughlywiththespawater.

IMPORTANT: Pressthebuttononthespacontrolpaneltoturnonthebubbleairblowerandhelpdissolvethe chemicals into the water.Nevermixchemicalstogether.Addthechemicalstothespawaterseparately.Thoroughlydissolveeachchemical before adding another one to the water.

˚C˚F

RESET

104 Fo

WARNINGAlwaysunplug thisproduct fromtheelectricaloutletbeforeremoving,cleaning,servicingormakinganyadjustmenttotheproduct.

13

14

12

13

192PO



English

Spa Tub Drainage1. Turnoffallthebuttons(heater,filterandbubble)onthecontrolpanelunit.2. Connectthedrainvalveadaptortoagardenhoseandpointtheotherend of the garden hose to a suitable draining area (see drawing 14).3. Removethedrainvalvecapfromoutsideofthespatubandattachthe drainvalveadaptortothedrainvalve(see drawing 14).4. Frominsideofthespatub,openthedrainvalvecap,waterwillstart flowingoutfromthegardenhose.5. When the water stops draining, disconnect the spa control unit from thespatubwall.Liftthespatubwallfromthesideoppositethedrain, leading any remaining water to the drain and emptying the spa completely (see drawing 15).6. Raiseupthespacontrolunitandopenthecapunderneaththefilter pump unit, drain out the water (see drawing 16). Do not tighten the cap now.7. Attachedtheinflationhose(7)totheairblowerinflationoutletontop of the control panel section.8. Pressthebutton,aimtheinflationhoseattheinlet/outletsonthespa tub and spa control unit to dry out any water in the piping system. (see drawings 17 & 18).9. When the water stops draining, raise up the spa control unit again and tightenthecapunderneaththefilterpumpunitback(see drawing 19).10. Useacleantoweltowipeupanyremainingwaterandmoistureonthe spa tub and spa control unit.11. Ensurethespatubandspacontolunitarethoroughlydried. NOTE: The enclosed plugs (15) canbeusedtocoverthewaterinletand outletconnectorsfromtheinsideofthespatubtopreventwaterfrom flowingout.

Spa Tub CleaningIfdirtisvisibleinthewaterorwaterbecomescloudyandproperwaterchemistry does not clear it up, change the water and clean the spa tub. See“SpaTubDrainage”sectiononhowtodrainthespa.Whileempty,removethecartridgehousingfrominsideofthespatubwall,cleanand/orreplacethefiltercartridge.Useaspongeandmildsoapsolutionto wipe away any soil or stains on the inside of the spa wall. Rinse thoroughly beforerefillingwithcleanwater.IMPORTANT: Donotusesteelwool,hardbrushesorabrasivecleaners.

Spa Tub Air Valve FasteningCheckthespatubairvalveforleakageandtightnessbeforeuse.Ifairisleakingfromtheairvalve,usetheprovidedwrench(22) totightentheairvalveasfollow:1. Makesurethespatubisdeflated,opentheairvalvecapandinsertthe wrench (22)intotheairvalvebody (see drawing 20).2. Withonehand,holdthebacksideoftheairvalvebasefromtheinsideof the spa tub wall and turn the wrench (22) clockwise. IMPORTANT:Donotovertightentheairvalve.Neveradjusttheair valvebasewhenthespaisinuseorfilledwithwater.

Spa CoverInspectthespacoverregularlyforleaks,prematurewearandtear,damage,orsignsofdeterioration.Neveruseawornordamagedcover:itwillnotprovidethelevelofprotectionrequiredtopreventunsupervisedaccesstothespa by a child.

MAINTENANCE

Page 14

14

17

16

19

18

˚C˚F

RESET

104 Fo

1

2

3

20

11

22

7

7

15

192PO



English

Page 15

MAINTENANCE (continued)

1. Drainandcleanthespafollowingthe“SpaTubDrainage”and“SpaTubCleaning”sections.2. Reversesetupinstructionstodeflateanddisassemblethespatub,spacontrolunitandspacoverair bladder.3. Makesureallthespacomponentsandaccessoriesarethoroughlycleananddrybeforestorage.Air-drythe spa tub in the sun for an hour before folding. 4. Foldthespatublooselyandavoidanysharpcornerstopreventdamageorleakagetothespatubliner.5. Prepareadditionalnewcartridgesfornexttimeuse.6. Storethespatubandaccessoriesinadry,temperaturecontrolled,between32º–104ºF(0º–40ºC), storage location.7. Theoriginalpackingcanbeusedforstorage.

STORAGE

Spa Tub and Cover Air Bladder RepairUsetheenclosedrepairpatchtorepairanypuncture:• Cleananddrytheareatoberepairedthoroughly.• Removethepatchbackingpaperandpresspatchfirmlyoverthepuncture. Smoothoutthesurfacetoremoveanyairbubblesunderthepatch.

192PO



English

TROUBLESHOOTING

FILTERPUMPDOESNOTOPERATE

NOTHEATINGPROPERLY

BUBBLEAIRBLOWERDOESNOTWORK

WATERFILTRATIONNOTWORKING

WATERNOTCLEAN

PUMPADAPTERSARENOTLEVELWITHTHESPAADAPTERS

TUBHASGOTASTRANGESHAPE

TUBLOOSESAIRPRESSURE

SPALEAKING

• Powerfailure.• GFCI/RCDtripped.• GFCI/RCDbroken.

• Temperaturesettoolow.• Dirtyfiltercartridge.• Heatingelementfailed.

• Pumpistoohot.

• Dirtyfiltercartridge.

• Insufficientfilteringtime.• Dirtyfiltercartridge.• Improperwatermaintenance.

• OnecharacteristicofPVCisthat it changes shape, which is normal.

• Extraairpressurebystrongsunshine.

• Airvalvelooses.• Holeorsplitonspatub.

• Spacontrolunitinlet/outletconnections not securely tight.• Spacontrolinlet/outleto-ringmissing.

• Checkpowersource.• ResettheGFCI/RCD.• ContactIntexServiceCenter.

• Set to a higher temperature.• Cleanorreplacethefiltercartridgeintime.• ContactIntexServiceCenter.

• Unplugthepump.• ContactIntexServiceCenter.

• Cleanorreplacethefiltercartridgeintime.

• Increasefiltrationtime.• Cleanorreplacethefiltercartridgeintime.• Refertothechemicalmanufacture’sinstructions.

• Elevatethepumpwithwoodoranothertypeof insulatedmaterialtobringthepump’sadapters levelwiththespa’sadapters.

• Pleasechecktheairpressureandreleaseairifnecessary. Duringveryhotweather,youmustchecktoseewhetheritis necessarytoreleasesomeair.Thisistoavoidanypossible damage to the tub.

• Filluptheinflatatedtubwithair,thenmakesuretheairvalves are secure, replace it if necessary. • Putliquidsoapandwaterinasquirtbottleandsprayon seams.Ifthereisaleakitwillbubble.Afteryoufindtheleak, cleananddrytheleakingarea,thenapplytherepairpatch that comes with your spa.

• Tighteninletandoutletconnections.• Coattheo-ringwithpetroleumjellyforwaterproof.• Ensureo-ringisinplaceandnotdamaged.

PROBLEM CAUSE SOLUTION

MAINTENANCE (continued)

Page 16

IMPORTANTTheambienttemperaturesofairhaveaneffectonthespatubinternalpressure.Airinsideofthespa tubmayexpandandcontractwithvarying temperature leading toreducepressure insideof thespatub. If thisoccurs,simplyusetheprovidedpressuregaugetocheckthe internalairpressure and add more air if necessary.

192PO



English

WARRANTYYourPureSpahasbeenmanufacturedusingthehighestqualitymaterialsandworkmanship.AllIntexproductshavebeeninspectedandfoundfreeofdefectspriortoleavingthefactory.ThisLimitedWarrantyappliesonlytothePureSpa listed below.

TheprovisionsofthisLimitedWarrantyapplyonlytotheoriginalpurchaserandisnottransferable.ThisLimitedWarrantyisvalidfortheperiodnotedbelowfromthedateoftheinitialretailpurchase.Keepyouroriginalsalesreceiptwiththismanual,asproofofpurchasewillberequiredandmustaccompanywarrantyclaimsortheLimitedWarrantyisinvalid.

PureSpaWarranty–1Year

Ifamanufacturingdefectisfoundwithintheperiodsnotedabove,pleasecontacttheappropriateIntexServiceCenterlistedintheseparate“AuthorizedServiceCenters”sheet.TheServiceCenterwilldeterminethevalidityoftheclaim.IftheServiceCenterdirectsyoutoreturntheproduct,pleasecarefullypackagetheproductandsendwithshippingandinsuranceprepaidtotheServiceCenter.Uponreceiptofthereturnedproduct,theIntexServiceCenterwillinspecttheitemanddeterminethevalidityoftheclaim.Iftheprovisionsofthiswarrantycovertheitem,theitemwillberepairedorreplacedatnocharge.

AnyandalldisputesregardingtheprovisionsofthisLimitedWarrantyshallbebroughtbeforeaninformaldisputesettlementboardandunlessanduntiltheprovisionsoftheseparagraphsarecarriedforth,nocivilactionmaybeinstituted.ThemethodsandproceduresofthissettlementboardshallbesubjecttotherulesandregulationssetforthbytheFederalTradeCommission(F.T.C.).IMPLIEDWARRANTIESARELIMITEDTOTHETERMSOFTHISWARRANTYANDINNOEVENTSHALLINTEX,THEIRAUTHORIZEDAGENTSOREMPLOYEESBELIABLETOTHEBUYERORANYOTHERPARTYFORDIRECTORCONSEQUENTIALDAMAGESORLIABILITIES.Somestates,orjurisdictionsdonotallowtheexclusionorlimitationofincidentalorconsequentialdamages,sotheabovelimitationorexclusionmaynotapplytoyou.

ThisLimitedWarrantydoesnotapplyiftheproductsaresubjecttonegligence,abnormaluseoroperation,accident,improperoperation,impropervoltageorcurrentcontrarytooperatinginstructions,ortodamagebycircumstancesbeyondIntex’scontrol,includingbutnotlimitedto,ordinarywearandtearanddamagecausedbyexposuretofire,flood,freezing,rain,orotherexternalenvironmentalforces.ThisLimitedWarrantyappliesonlytothosepartsandcomponentssoldbyIntex.TheLimitedWarrantydoesnotcoverunauthorizedalterations,repairsordisassemblybyanyoneotherthanIntexServiceCenterpersonnel.

DO NOT GO BACK TO THE PLACE OF PURCHASE FOR RETURN OR REPLACEMENT. IF YOU ARE MISSING PARTS OR NEED ASSISTANCE, PLEASE CALL US TOLL-FREE (FOR U.S. AND CANADIAN RESIDENTS): 1-800-234-6839 OR VISIT OUR WEBSITE: WWW.INTEXSTORE.COM. ProofofPurchasemustaccompanyallreturnsorthewarrantyclaimwillbeinvalid.

Page 17

installing and using this product. PureSpa™SSP-10 · PDF fileOWNER’S MANUAL PureSpa™SSP-10 IMPORTANT SAFETY RULES Read, understand, and follow all instructions carefully before

Documents