Installing 22FEB11

KODAK i2400/i2600/i2800 Scanners Installing the Scanner

February 2011 - DRAFT

February 2011

DRAFT

Objective

At the completion of this module, you will be able to install the Scanner.

2

February 2011

DRAFT

System Requirements

333

February 2011

DRAFT

System Requirements for the Computer

• Recommended processor and memory:

– For documents up to 660 mm (26 in.) long and up to 400 dpi: Intel Core-2 Duo, 2.1 GHz per processor or equivalent, 2 GB RAM

– For longer documents/higher resolutions: Intel Core-2, Duo, 2.1 GHz per processor or equivalent, 4 GB RAM

NOTE: For optimal performance with Microsoft Windows 7, at least 3 GB RAM is recommended.

• Supported operating systems:– Microsoft Windows 7 (32-bit and 64-bit)– Microsoft Windows Vista (with SP1 and x64 Edition)– Microsoft Windows XP (32-bit and 64-bit) with SP2 and higher– Microsoft Windows 2008 Server x64 Edition

• Required hardware– USB 2.0 port (compatible with USB 1.1 but at slower speeds)– CD-ROM drive

• 100 MB free hard disk space

4

February 2011

DRAFT

Installing the Scanner

555

February 2011

DRAFT

Contents of the Box

Hardware• KODAK i2400, i2600 or

i2800 Scanner• USB 2.0 cable• Power supply• AC power cord bundles

Software• Installation CD

– Driver Software– Scan Validation Tool– Smart Touch

• Application CD(s); contents vary by region but may include:

– KODAK Capture Software– NUANCE PaperPort 12 Software– NUANCE OmniPage 17 Software

Sample cleaning kit

6

Documentation• Printed Installation Guide• Printed Reference Guide, English• Printed User’s Guide, English• Warranty/Registration

sheets• Service & Support

Contact Information sheets

• Miscellaneous flyers

February 2011

DRAFT

Installing the Software

7

IMPORTANT: You must install the driver software before connecting the Scanner to your computer.

1. Insert the Installation CD into the CD-ROM drive.

The installation program should start automatically.

If it does not start automatically, do the following steps.

a. Double-click the My Computer icon on your desktop.

b. Right-click the icon for your CD-ROM drive and select Open.

c. If the computer has:

» Windows 7 operating system, right-click the Setup.exe file and select Run As Administrator…

» Another supported operating system, double-click the Setup.exe file.

February 2011

DRAFT

Installing the Software

8

2. Select Install Scanner Software.

NOTE: If the message Portions of this application are installed is displayed, click Yes to continuethe installation process. Any previously installed KODAK Scanner software that is shared with this Scanner will be updated.

3. Click Next when the Welcome screen is displayed.

4. Click I Agree after you have read and agreed with the terms of the Software License Agreement. The installation starts and several progress screens are displayed.

5. Click Finish when the installation is complete.

6. Remove the Installation CD from the CD-ROM drive.

February 2011

DRAFT

Default Installation Paths – Driver Software, Etc.

9

File Location - from Start Button Location - from My Computer

Scanner user’s guide

Start > Programs > Kodak > Document Imaging > i2400, i2600, i2800 > User’s Guide

C:\WINDOWS\twain_32\Kodak\kds_i2000\UserGuide\User's Guide ENU.pdf

TWAIN application

C:\WINDOWS\system32\Kodak\kds_i2000\lib\twaingui.exe

TWAIN help C:\WINDOWS\system32\Kodak\kds_i2000\lib\help\en_usa.chm (or other language)

ISIS help C:\WINDOWS\pixtran\Help\eki2800.chm

ISIS Network Server application

Start > Programs > ISIS Scanner Drivers > ISIS Network Servers

C:\WINDOWS\pixtran\pixnetsr.exe

ISIS Network Server user’s / setup guides

Start > Programs > ISIS Scanner Drivers > ISIS Network User Guide

Start > Programs > ISIS Scanner Drivers > ISIS on Citrix Setup Guide

C:\WINDOWS\pixtran\help\networkISIS.htm

C:\Program Files\Common Files\EMC\ISIS\Citrix\Citrix_ISIS.htm

February 2011

DRAFT

Default Installation Paths – Application Software

10

File Location - from Start Button, Etc. Location - from My Computer

Scan Validation Tool application

Start > Programs > Kodak > Document Imaging > Scan Validation Tool

C:\Program Files\Kodak\Document Imaging\ScanValidation.exe

Smart Touch application

Start > Programs > Kodak > Document Imaging > i2400, i2600, i2800 > Smart Touch

C:\Program Files\Kodak\Document Imaging\kds_i2000\Smart Touch\KSSCFG.exe

Smart Touch user’s guide

Click the Smart Touch icon in the system tray and select Help; it opens in the correct language for the system

C:\Program Files\Kodak\Document Imaging\kds_i2000\Smart Touch\Workstation\Help\Smart Touch_i2400_i2600_i2800_UG_en_us.pdf (or other language)

February 2011

DRAFT

Installing the Scanner

11

1. Select the appropriate AC power cord from the supply of power cords packed with your Scanner.

2. Attach the power cord to the power supply. NOTE: Be sure that the power cord is securely

attached to the power supply.3. Plug the output power cord from the power

supply into the power port on the Scanner.4. Plug the other end of the power

cord into the wall outlet. NOTE: The green LED on the

power supply indicates the power is on.

5. Attach the USB cable to the Scanner USB port on the back of the Scanner.

6. Attach the other end of the USB cable to the proper USB port on your computer.

February 2011

DRAFT

Installing the Scanner

IMPORTANT: Securing the cord and cable helps to prevent damage to the connectors.

7. Secure the power cord and USB cable into the routing channel on the back of the Scanner.

8. Press the power button on the back of the Scanner to the On (I) position.

12

February 2011

DRAFT

Initializing the Scanner

The operating system on the computer:

1. Recognizes the Scanner type, by identifying the vendor ID and product ID (VID/PID) of the Scanner through the USB connection

2. Recognizes the Kodak software

3. Loads firmware from the computer onto the Scanner

During this process, on the Scanner:• The indicator light on the

LED/Start button flashes green as the Scanner goes through a series of self tests.

• The function window / graphical display shows a progress indicator.

When the initialization process is complete, the LED/Start button stops flashing and stays green.

13

LED/Start button

graphical display

February 2011

DRAFT

Locking the Scanner

A security lock port is available if you want to secure the Scanner. You can purchase a standard security lock (shown below) at an office supply store.

1. Insert the lock into the back of the Scanner and turn the key to lock the Scanner in place.

2. Use the looped end of the cable to secure the cable and Scanner to a stationary place.

14

February 2011

DRAFT

Adjusting the Scanner

1. Be sure the Scanner is on and ready to scan (indicator light is green and steady).

2. Tilt the Scanner. Using both hands, rotate the Scanner body away from you, so that the Output Tray slides out from underneath the Scanner.

3. Adjust the side guides.

4. Open the Input Tray.

5. Adjust the Output Tray.

15

2

3

4

5

February 2011

DRAFT

Installing the Other Application Software

• Smart Touch is the preferred application.• If you are installing other application software:

– It must be TWAIN-compliant.

– Install this software only after installing the Scanner.

16

February 2011

DRAFT

Checking that the Scanner is Ready

The Scanner icon on the system tray should show that the Scanner is ready.

If the Scanner is not ready:

1. Check that:

a. The power button on the back of the Scanner is in the On (I) position.

b. The power and USB cords are connected correctly at both ends.

2. If the problem continues:

a. Turn off the Scanner power.

b. Shut down and turn off the computer.

c. Turn on the Scanner power, and wait for the Scanner to finish initializing.

d. Turn on the computer.

17

Ready Not Ready

February 2011

DRAFT

Troubleshooting the Installation

During installation, the main Setup.exe file displays any errors that it finds, but suppresses any errors found by the other executable files that it calls.

Therefore, it’s possible for the installation to appear complete even when some components have not been successfully installed.

If expected functions are missing, individually run the other executable files.

18

February 2011

DRAFT

Wrap-up

19

February 2011

DRAFT

Activities

Follow or watch (for instructor-led training) these steps:• Install the Scanner software and hardware.• Adjust the Output Tray to different positions.• Energize the Scanner.• Locate the Indicator Light.

20

February 2011

DRAFT

Comments / Questions

Any comments or questions?

21

Press [Esc]