www.stoneyard.com | 17 Installation] Installation varies dramatically from project to project. Please contact a mason/stone professional or masonry cement manufac- turer for more detailed instructions. Also visit www.stoneyard.com/install for additional information. Laticrete 800.243.4788 www.laticrete.com For more information, please visit www.stoneyard.com/install Quikrete 800.282.5828 www.quikrete.com Silpro 800.343.1501 www.silpro.com UMACO 800.442.5535 www.umaco.com MTI 800.879.3348 www.mtidry.com in Veneer Boxes Flats: 5 sf Corners: 5 lf 18 boxes per pallet in Veneer Crates Flats: 168 sf 14 layers, 12 sf per layer Corners: 150 lf or 75 lf Corners are available for all shapes and colors. in Veneer can be applied directly to any properly pre- pared surface. Building Veneer requires a masonry shelf for support. 1 inch in Veneer 3-5 inch Building Veneer Grand Finale] Natural Stone: Rough Trimmed vs. Saw Cut Natural stone is a unique product with varying shapes and rough edges. If you prefer this natural look, our stone will require minimal trimming and shaping. A waste factor of 10% to 20% should be acceptable. If you prefer a more consistent look with sawn edges, uniform spacing, and tight joints, the waste factor will increase. For this installation, a 25% to 45% or more waste factor may apply. Labor costs will increase the more the stone needs to be trimmed. A mock-up is highly recommended to determine joint sizes, color distribution, and the waste factor. Saw Cut Rough Trimmed Saw Cut Rough Trimmed