V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/19/2018 . This information is updated periodically and should not be relied upon after 2 years from 3/19/2018 . Please visit OZCOBP.com to get current information. Installation Instructions, Post Bands & Accessories 51783 51786 51787 4x4 Post Band (4X4-BND-IW) 6x6 Post Band (6X6-BND-IW) 8x8 Post Band (8X8-BND-IW) Accessories Installation Instructions, Post Bands & 1 secure post fractures (Note: Post Bands cannot close cracks) use with decorative OZCO Accessories installation steps shown (8x8), but common to all post bands SOLIDWORKS Educational Product. For Instructional Use Only.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/19/2018 . This information is updated periodically and should not be relied upon after 2 years from 3/19/2018 . Please visit OZCOBP.com to get current information.
Installation Instructions, Post Bands & Accessories 51783 51786 51787
4x4 Post Band (4X4-BND-IW)6x6 Post Band (6X6-BND-IW)8x8 Post Band (8X8-BND-IW)
AccessoriesInstallation Instructions, Post Bands & 1
secure post fractures (Note: Post Bands cannot close cracks)
use with decorative OZCO Accessories
installation steps shown (8x8), but common to all post bands
SOLIDWORKS Educational Product. For Instructional Use Only.
SOLIDWORKS Educational Product. For Instructional Use Only.
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/19/2018 . This information is updated periodically and should not be relied upon after 2 years from 3/19/2018 . Please visit OZCOBP.com to get current information.
4x4 Post Band (4X4-BND-IW)
3 15
16 "
3 716 "
6x6 Post Band (6X6-BND-IW)
6"
5 12 "
8x8 Post Band (8X8-BND-IW)
8"
7 12 "
removable caps for accessory mounting
typical to all sizes
optional securing for heavy loads
116 3
16
"
1 3 "
78 "
OverviewAccessoriesInstallation Instructions, Post Bands & 3
SOLIDWORKS Educational Product. For Instructional Use Only.
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/19/2018 . This information is updated periodically and should not be relied upon after 2 years from 3/19/2018 . Please visit OZCOBP.com to get current information.
SOLIDWORKS Educational Product. For Instructional Use Only.
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/19/2018 . This information is updated periodically and should not be relied upon after 2 years from 3/19/2018 . Please visit OZCOBP.com to get current information.
Accessories5Installation Instructions, Post Bands &
SOLIDWORKS Educational Product. For Instructional Use Only.
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/19/2018 . This information is updated periodically and should not be relied upon after 2 years from 3/19/2018 . Please visit OZCOBP.com to get current information.
Basic Assembly-step 16Installation Instructions, Post Bands &
Accessories
locate and install post band "finger tight" on post in desired location.
TIP: while not required, installing 2 post clamps per post adds dramtic look plus allows for addiontal accessory installation
SOLIDWORKS Educational Product. For Instructional Use Only.
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/19/2018 . This information is updated periodically and should not be relied upon after 2 years from 3/19/2018 . Please visit OZCOBP.com to get current information.
Basic Assembly-step 2 & 37Installation Instructions, Post Bands &
Accessories
step 2
1/2" socket
step 3
tighten all sides evenly by alternating and repeating steps 2 & 3 securing evenly•DO NOT OVERTIGHTEN;1-2 turns additional once bolt is tight.•Impact Driver NOT RECOMMENDED•
SOLIDWORKS Educational Product. For Instructional Use Only.
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/19/2018 . This information is updated periodically and should not be relied upon after 2 years from 3/19/2018 . Please visit OZCOBP.com to get current information.
Basic Assembly (optional step)8Installation Instructions, Post Bands &
Accessories
(sold separately)
OWT Timber Screw 56625 shown
when additional strength is required, install OWT Timber Screws
3/8" DriverTool Required
OWT Timber Screw
SOLIDWORKS Educational Product. For Instructional Use Only.
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/19/2018 . This information is updated periodically and should not be relied upon after 2 years from 3/19/2018 . Please visit OZCOBP.com to get current information.
Accessory installation-step 19Installation Instructions, Post Bands &
Accessories
carefully remove covers & discard
SOLIDWORKS Educational Product. For Instructional Use Only.
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/19/2018 . This information is updated periodically and should not be relied upon after 2 years from 3/19/2018 . Please visit OZCOBP.com to get current information.
Accessory installation-step 210Installation Instructions, Post Bands &
Accessories
Screw
Tool RequiredTorx T30 driver
SOLIDWORKS Educational Product. For Instructional Use Only.