This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Installation timeThe installation time is approx. 1.5 hours. This may vary depending on the condition of the car and theequipment in it.
Important informationThese installation instructions are primarily designed for use within the BMW dealership organisation and byauthorised BMW service companies.-
In any event the target group for these installation instructions is specialist personnel trained on MINI carswith the appropriate specialist knowledge.
All work must be completed using the latest MINI repair manuals, wiring diagrams, servicing manuals andwork instructions, in a rational order, using the prescribed tools (special tools) and observing current healthand safety regulations.
If you experience installation or function problems, restrict troubleshooting to approx. 0.5 hours formechanical work and 1.0 hour for electrical work.To avoid unnecessary extra work and/or costs, send an inquiry straight away to the technical parts supportteam via the Aftersales Assistance Portal (ASAP).
Quote the following information:
– Vehicle identification number,
– Retrofit kit part number,
– A detailed description of the problem,
– Any work already carried out.
Do not archive the hard copy of these installation instructions since daily updates are provided via ASAP!
Pictograms! Denotes instructions that draw your attention to dangers.
Denotes instructions that draw your attention to special features.
Installation informationEnsure that the cables and/or lines are not kinked or damaged as you install them in the vehicle. Costs arisingfrom this will not be reimbursed by BMW AG.
Additional cables/lines that you install must be secured with cable ties. If the specified PIN chambers areoccupied, double crimps or twin-lead terminals must be used.
All pictures show LHD cars; proceed accordingly on RHD cars.
Special tools required00 9 325, trim key61 6 130, dismantling tool
LegendA Control unit with cable setB LED daytime running light, leftC LED daytime running light, rightD Cable tie 700 mm x 5.0 mm (2 x)E Crimp connectorF Adhesive pad (2 x)G Cable tie (10 x)
ISTA No.Conduct a brief test --- Disconnect the negative pole of the battery 12 00 ...
The following components must be removed first of allFront ornamental grille 51 13 000Front trim panel on wheel house, left and right 51 13 102Bumper trim 51 11 156Left headlight (adaptive cornering light) or left headlight (xenon)
63 12 015/63 12 010
Right and left fog lights (no longer required) 63 17 075Left cowl panel cover 51 13 123Left and right windscreen wipers 61 61 081Front left door sill strip 51 47 000Detach footwell module 61 35 115
LegendA* Control unitA1* Cable open, with miniature connector E* to right footwell module A4011A2* M6 ring eyelet, to engine compartment power distribution box A400aA3* M6 ring eyelet, to ground support point X13004
A4* SW 2-pin socket casing, to socket on vehicle of the left side marker light X129A5* SW 2-pin socket casing, to socket on vehicle of the left front fog light X768A6* WS 6-pin socket casing, to left LED daytime running light B*A7* SW 2-pin socket casing, to socket on vehicle of the right side marker light X769A8* SW 2-pin socket casing, to socket on vehicle of the right front fog light X136A9* WS 6-pin socket casing, to right LED daytime running light C*All the designations marked with an asterisk (*) apply only to these installation instructions or this wiring diagram.
Cable coloursBL Blue GR Grey RT RedBO Bordeaux (Burgundy) L-GN Light green SW BlackBR Brown NT Natural TR TransparentGE Yellow OR Orange VI VioletGN Green RO Pink WS White
FunctionTo ensure proper functioning of the LED daytime running lights, the daytime running light option of yourvehicle may not be reactivated via the onboard computer.