Orient 1 set-up Assemble the hybrid pole. 1 Raise pole by opening latch . Secure Secure pole in the base of stand . 2 at desired height. 3 Gently raise graphic. Graphic to top rail attachment x2 +-01 • ~ -:\- - ' Gently lean the unit back, pulling the graphic up by the toprail and secure Pull out plastic end caps, unsnap top Attach graphic to top rail slider and onto top pole . 5 Leveling feet located under unit. 6 rail and remove slider from rail. 1 insert top rail slider back into the rail. 2 Graphic to base attachment Line the bottom of the front of the graphic print with adhesive tape on white leader strip. 1 Once aligned pull adhesive tape Snap close top rail and insert the slowly while applying pressure to Place additional masking tape for end caps. 3 graphic to adhere tape. 2 extra protection. 3 4
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Orient 1 set-up
Assemble the hybrid pole. 1 Raise pole by opening latch. Secure
Secure pole in the base of stand. 2 at desired height. 3 Gently raise graphic.
Graphic to top rail attachment
x2
+-01 • ~ -:\- -
'Gently lean the unit back, pulling the graphic up by the toprail and secure Pull out plastic end caps, unsnap top Attach graphic to top rail slider and
onto top pole. 5 Leveling feet located under unit. 6 rail and remove slider from rail. 1 insert top rail slider back into the rail. 2
Graphic to base attachment
Line the bottom of the front of the graphic print with adhesive tape
on white leader strip. 1
Once aligned pull adhesive tape Snap close top rail and insert the slowly while applying pressure to Place additional masking tape for
end caps. 3 graphic to adhere tape. 2 extra protection. 3
4
;~,_,
Remove pin while holding onto the graphic so the graphic does not Slowly retract the graphic back
retract back in quickly. 4 into the base. 5
Related Documents
