Versatile Access Power and Integration Enclosures Installation Guide Models Include: Trove2M2 - Trove2 enclosure with Altronix/Mercury backplane TM2 - Altronix/Mercury backplane only Trove2V2 - Trove2 enclosure with Altronix/Vertx backplane TV2 - Altronix/Vertx backplane only TMV2 - Mercury or Vertx optional door backplane Rev. 072815 More than just power.™
16
Embed
Installation Guide - surveillance-video.com · Versatile Access Power and Integration Enclosures Installation Guide Models Include: Trove2M2 - Trove2 enclosure with Altronix/Mercury
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Versatile Access Powerand Integration Enclosures
Installation GuideModels Include:
Trove2M2- Trove2 enclosure with Altronix/Mercury backplane
TM2- Altronix/Mercury backplane only
Trove2V2- Trove2 enclosure with Altronix/Vertx backplane
TV2- Altronix/Vertx backplane only
TMV2- Mercury or Vertx optional door backplane
Rev. 072815 More than just power.™
- 2 - Altronix/Mercury/Vertx Enclosure
Overview:Trove2M2 or Trove2V2 accommodates various combinations of Mercury or Vertx boards with or without Altronix power supplies and accessories for access systems.
Specifications:• 19 Gauge grey enclosure with ample knockouts for convenient access.Enclosure Dimensions (H x W x D): 27.25” x 21.75” x 6.5” (692.15mm x 552.45mm x 165.1mm)
Trove2M2- Trove2 enclosure with TM2 Altronix/Mercury backplane.• Includes: tamper switch, cam lock, lock nuts and mounting hardware.Trove2M2 accommodates acombination of the following:• Two (2) eFlow3NB, eFlow4NB, eFlow6NB, eFlow102NB or eFlow104NB.• Four (4) ACM4(CB), ACM8(CB), MOM5, PD4UL(CB), PD8UL(CB).• Six (6) EP1502, MR52, MR16IN, MR16OUT.• Six (6) EP2500 or MUX8.• Five (5) MR51e.• Two (2) MR50.
Trove2V2- Trove2 enclosure with TV2 Altronix/Vertx backplane.• Includes: tamper switch, cam lock, lock nuts and mounting hardware.Trove2V2 accommodates acombination of the following:• Two (2) eFlow3NB, eFlow4NB, eFlow6NB, eFlow102NB or eFlow104NB.• Four (4) ACM4(CB), ACM8(CB), MOM5, PD4UL(CB), PD8UL(CB).• Six (6) V100, V200, V300, V1000 or V2000.
Backplanes Only:TM2- Altronix/Mercury backplane only.• Includes: lock nuts and mounting hardware.TV2- Altronix/Vertx backplane only.• Includes: lock nuts and mounting hardware.
Optional Door Backplane:TMV2- Mercury or Vertx door backplane only.• Includes: lock nuts and mounting hardware.
Trove2M2, Trove2V2 Installation Instructions:Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local codes and authorities having jurisdiction. Product is intended for indoor use only. 1. Remove backplane from enclosure. Do not discard hardware.2. Mount unit in the desired location. Mark and predrill holes in the wall to line up with the top three keyholes in the enclosure. Install three upper fasteners and screws in the wall with the screw heads protruding. Place the enclosure’s upper keyholes over the three upper screws, level and secure. Mark the position of the lower three holes. Remove the enclosure. Drill the lower holes and install the three fasteners. Place the enclosure’s upper keyholes over the three upper screws. Install the three lower screws and make sure to tighten all screws (Enclosure Dimensions, pg. 10).3. Mount UL Listed tamper switch (included) (Ademco model 112 or equivalent) at the top of the enclosure. Slide the tamper switch bracket onto the edge of the enclosure approximately 2” from the right side (Fig. 1, pg. 2). Connect tamper switch wiring to the Access Control Panel input or the appropriate UL Listed reporting device. To activate alarm signal open the door of the enclosure.4. Mount Altronix/Mercury/Vertx boards to backplane, refer to pages 3-12.
Edge of Enclosure
to Access Control Panel or U.L. Listed
Reporting Device
Enclosure
Honeywellmodel # 112
Tamper Switchor equivalent(provided)
Fig. 1
Hardware:
Male/Female Standoff
Standoff (Metal or Nylon)
5/16” Pan Head Screw
7/8” Pan Head Screw
Lock Nut
Altronix/Mercury/Vertx Enclosure - 3 -
AltronixPower Supply orSub-Assembly
Metal Standoff Placement
Metal Standoff Placement
AltronixPower Supply orSub-Assembly
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP1501,MR51e
MercuryEP1501,MR51e
MercuryEP1501,MR51e
MercuryEP1501,MR51e
MercuryEP1501,MR51e
MercuryMR50
MercuryMR50
MercuryEP1502, MR52,
MR16IN, MR16OUTAltronixSub-Assembly
AltronixSub-Assembly
TM2: Configuration of Altronix Power Supply and/or Sub-Assembly Boards1. Fasten standoffs (provided) to pems that match the hole pattern for Altronix Power Supply/Chargers or Altronix Sub-Assembly boards (Fig. 2, pg. 3). Use male/female nylon standoffs for the upper two mounting holes in the board. Use metal standoffs for the bottom mounting holes to provide sufficient grounding for the board.2. Affix boards to standoffs (Fig. 2, pg. 3) by pressing down the upper mounting holes onto nylon standoffs. Use provided mounting screws to affix the lower mounting holes. Make sure that boards are locked onto standoffs.3. Fasten backplane to Trove2 enclosure utilizing lock nuts (provided).
Fig. 2
- 4 - Altronix/Mercury/Vertx Enclosure
AltronixPower Supply orSub-Assembly
Metal Standoff Placement
Metal Standoff Placement
AltronixPower Supply orSub-Assembly
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP1501,MR51e
MercuryEP1501,MR51e
MercuryEP1501,MR51e
MercuryEP1501,MR51e
MercuryEP1501,MR51e
MercuryMR50
MercuryMR50
MercuryEP1502, MR52,
MR16IN, MR16OUTAltronixSub-Assembly
AltronixSub-Assembly
TM2: Configuration of Mercury Boards1. Fasten standoffs (provided) to pems that match the hole pattern for Mercury EP1502, MR52, MR16IN or MR16OUT (Fig. 3, pg. 4). Use male/female nylon standoffs only.2. Affix boards to standoffs (Fig. 3, pg. 4) by pressing down the mounting holes onto nylon standoffs. Make sure that boards are locked onto standoffs.3. Fasten backplane to Trove2 enclosure utilizing lock nuts (provided).
Fig. 3
Altronix/Mercury/Vertx Enclosure - 5 -
TM2: Configuration of Mercury Boards (cont’d)1. Fasten standoffs (provided) to pems that match the hole pattern for Mercury EP2500 or MUX8 (Fig. 4, pg. 5). Use male/female nylon standoffs only.2. Affix boards to standoffs (Fig. 4, pg. 5) by pressing down the mounting holes onto nylon standoffs. Make sure that boards are locked onto standoffs.3. Fasten backplane to Trove2 enclosure utilizing lock nuts (provided).
Fig. 4
AltronixPower Supply orSub-Assembly
Metal Standoff Placement
Metal Standoff Placement
AltronixPower Supply orSub-Assembly
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP1501,MR51e
MercuryEP1501,MR51e
MercuryEP1501,MR51e
MercuryEP1501,MR51e
MercuryEP1501,MR51e
MercuryMR50
MercuryMR50
MercuryEP1502, MR52,
MR16IN, MR16OUTAltronixSub-Assembly
AltronixSub-Assembly
- 6 - Altronix/Mercury/Vertx Enclosure
TM2: Configuration of Mercury Boards (cont’d)1. Fasten standoffs (provided) to pems that match the hole pattern for Mercury EP1501 or MR51e (Fig. 5, pg. 6). Use male/female nylon standoffs only.2. Affix boards to standoffs (Fig. 5, pg. 6) by pressing down the mounting holes onto nylon standoffs. Make sure that boards are locked onto standoffs.3. Fasten backplane to Trove2 enclosure utilizing lock nuts (provided).
Fig. 5
AltronixPower Supply orSub-Assembly
Metal Standoff Placement
Metal Standoff Placement
AltronixPower Supply orSub-Assembly
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP1501,MR51e
MercuryEP1501,MR51e
MercuryEP1501,MR51e
MercuryEP1501,MR51e
MercuryEP1501,MR51e
MercuryMR50
MercuryMR50
MercuryEP1502, MR52,
MR16IN, MR16OUTAltronixSub-Assembly
AltronixSub-Assembly
Altronix/Mercury/Vertx Enclosure - 7 -
TM2: Configuration of Mercury Boards (cont’d)1. Fasten standoffs (provided) to pems that match the hole pattern for Mercury MR50 (Fig. 6, pg. 7). Use male/female nylon standoffs only.2. Affix boards to standoffs (Fig. 6, pg. 7) by pressing down the mounting holes onto nylon standoffs. Make sure that boards are locked onto standoffs.3. Fasten backplane to Trove2 enclosure utilizing lock nuts (provided).
Fig. 6
AltronixPower Supply orSub-Assembly
Metal Standoff Placement
Metal Standoff Placement
AltronixPower Supply orSub-Assembly
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP1501,MR51e
MercuryEP1501,MR51e
MercuryEP1501,MR51e
MercuryEP1501,MR51e
MercuryEP1501,MR51e
MercuryMR50
MercuryMR50
MercuryEP1502, MR52,
MR16IN, MR16OUTAltronixSub-Assembly
AltronixSub-Assembly
- 8 - Altronix/Mercury/Vertx Enclosure
VertxV100, V200, V300,
V1000, V2000
VertxV100, V200, V300,
V1000, V2000
VertxV100, V200, V300,
V1000, V2000
VertxV100, V200, V300,
V1000, V2000
VertxV100, V200, V300,
V1000, V2000
VertxV100, V200, V300,
V1000, V2000
AltronixPower Supply orSub-Assembly
Metal Standoff Placement
Metal Standoff Placement
AltronixPower Supply orSub-Assembly
AltronixSub-Assembly
AltronixSub-Assembly
AltronixSub-Assembly
AltronixSub-Assembly
AltronixSub-Assembly
AltronixSub-Assembly
TV2: Configuration of Altronix Power Supply and/or Sub-Assembly Boards1. Fasten standoffs (provided) to pems that match the hole pattern for Altronix Power Supply/Chargers or Altronix Sub-Assembly boards (Fig. 7, pg. 8). Use male/female nylon standoffs for the upper two mounting holes in the board. Use metal standoffs for the bottom mounting holes to provide sufficient grounding for the board.2. Affix boards to standoffs (Fig. 7, pg. 8) by pressing down the upper mounting holes onto nylon standoffs. Use provided mounting screws to affix the lower mounting holes. Make sure that boards are locked onto standoffs.3. Fasten backplane to Trove2 enclosure utilizing lock nuts (provided).
Fig. 7
Altronix/Mercury/Vertx Enclosure - 9 -
TV2: Configuration of Vertx Boards1. Fasten standoffs (provided) to pems that match the hole pattern for Vertx V100, V200, V300, V1000 or V2000 boards (Fig. 8, pg. 9).2. Mount boards to standoffs (Fig. 8, pg. 9) utilizing 7/8” pan head screws (provided).3. Fasten backplane to Trove2 enclosure utilizing lock nuts (provided).
Fig. 8
VertxV100, V200, V300,
V1000, V2000
VertxV100, V200, V300,
V1000, V2000
VertxV100, V200, V300,
V1000, V2000
VertxV100, V200, V300,
V1000, V2000
VertxV100, V200, V300,
V1000, V2000
VertxV100, V200, V300,
V1000, V2000
AltronixPower Supply orSub-Assembly
Metal Standoff Placement
Metal Standoff Placement
AltronixPower Supply orSub-Assembly
AltronixSub-Assembly
AltronixSub-Assembly
AltronixSub-Assembly
AltronixSub-Assembly
AltronixSub-Assembly
AltronixSub-Assembly
- 10 - Altronix/Mercury/Vertx Enclosure
TMV2: Configuration of Mercury Boards1. Fasten standoffs (provided) to pems that match the hole pattern for Mercury EP1502, MR52, MR16IN or MR16OUT (Fig. 9, pg. 10). Use male/female nylon standoffs only.2. Affix boards to standoffs (Fig. 9, pg. 10) by pressing down the mounting holes onto nylon standoffs. Make sure that boards are locked onto standoffs.3. Fasten backplane to Trove2 enclosure door utilizing lock nuts (provided).
Fig. 9
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP2500,MUX8
Altronix/Mercury/Vertx Enclosure - 11 -
TMV2: Configuration of Mercury Boards (cont’d)1. Fasten standoffs (provided) to pems that match the hole pattern for Mercury EP2500 or MUX8 (Fig. 10, pg. 11). Use male/female nylon standoffs only.2. Affix boards to standoffs (Fig. 10, pg. 11) by pressing down the mounting holes onto nylon standoffs. Make sure that boards are locked onto standoffs.3. Fasten backplane to Trove2 enclosure door utilizing lock nuts (provided).
Fig. 10
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP1502, MR52,
MR16IN, MR16OUT
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP2500,MUX8
MercuryEP2500,MUX8
- 12 - Altronix/Mercury/Vertx Enclosure
TMV2: Configuration of Vertx Boards1. Fasten standoffs (provided) to pems that match the hole pattern for Vertx V100, V200, V300, V1000 or V2000 boards (Fig. 11, pg. 12).2. Mount boards to standoffs (Fig. 11, pg. 12) utilizing 7/8” pan head screws (provided).3. Fasten backplane to Trove2 enclosure door utilizing lock nuts (provided).
Fig. 11
VertxV100, V200, V300,
V1000, V2000
VertxV100, V200, V300,
V1000, V2000
VertxV100, V200, V300,
V1000, V2000
VertxV100, V200, V300,
V1000, V2000
VertxV100, V200, V300,
V1000, V2000
VertxV100, V200, V300,
V1000, V2000
- 13 - Altronix/Mercury/Vertx Enclosure
TM2 and TV2 Mounting Diagram
7.5”(190.5mm)
25.4”(645.16mm)
19.4”(492.76mm)
7.5”(190.5mm)
24.9
5” (6
33.7
3mm
)
12.62”(320.55mm)
12.6
2” (3
20.5
5mm
)8.
495”
(215
.77m
m)
0.45”(11.43mm)
1.0”(25.4mm)
1.0”(25.4mm)
16.2
45”
(412
.62m
m)
9.2”(233.68mm)
0.156”( 3.96mm)
7.5”(190.5mm)
7.5”(190.5mm)
- 14 - Altronix/Mercury/Vertx Enclosure
TMV2 Mounting Diagram
13.7”(350mm)
13.7”(350mm)
7.4”(188mm)
8”(203.2mm)
7.85”(199.39mm)
7.5”(190.5mm)
18.1”(459.7mm)
10.82”(274.8mm)
2.075”(52.7mm)
23.7”(602mm)
0.45”(11.43mm)
8.7”(221mm)
11.8”(299.7mm)
8.7”(221mm)
0.156”( 3.96mm)
- 15 - Altronix/Mercury/Vertx Enclosure
Notes:
- 16 - Altronix/Mercury/Vertx Enclosure
Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice.
140 58th Street, Brooklyn New York 11220 USA, 718-567-8181, fax: 718-567-9056website: www.altronix.com, e-mail: [email protected]. Made in USA.IITrove2M2/Trove2V2 - Rev. 100515 F21P MEMBER
Enclosure Dimensions (H x W x D approximate):27.25” x 21.75” x 6.5” (692.15mm x 552.45mm x 165.1mm)