Install footing forms, laser level – this technique ...integraspec.com/documents/Install_Presentation.pdf · Install footing forms, laser level – this technique demonstrates concrete

Install footing forms, laser level – this technique demonstrates concrete placement using pump truck.

Concrete placement in footing forms with pump truck – footing rebar placement when specified by engineer.

Concrete placement in footing forms using wheel barrels directly from concrete truck.

Levelling concrete in forms.

Concrete placement from cement truck to support pads.

Skreeted footing form, showing corner pin and cold joint pin.

Installing cold joint pins in centre of footing.

Finished footing, skreeted and cold joint pins installed.

Chalked footing, represents

outline of building with footing forms removed and cold joint pins showing.

Stripped footings with Big “O” placement.

Under slab gravel placement.

Easy to transport enough

material for a residential basement and garage.

37 square feet of finished wall space can be carried on one shoulder.

Placement of first corner.

First corner placement with web spacers installed.

Installing standard panels, first row.

Installing standard panels, second row.

First row of rebar placement, inside clip.

Rebar bender/cutter, ICF stored material, measurement board, and rebar.

Adjusting block to modulate to building measurements. Block cut to nearest channel (1” cut line).

Easy to cut panels with a hand saw.

Perimeter of building, installed up to four courses; door openings started.

T-wall intersection showing

cut out every second row for concrete flow.

Wall alignment system installed at fourth course.

Wall alignment system with turnbuckle bracing prior to scaffold bracket being installed.