We design and supply specialise measurement tools for use in the inspection of ISO general cargo containers. Our tools makes it easy for inspectors to perform damage inspection on containers with speed, accuracy and safety. Our tools are designed to be used for all the common inspection criterias such as IICL, UCIRC, CIC and other seaworthy criterias. 1. Measure side panel out of ISO+40mm (UCIRC) using 2040 measuring gauge 2. Measure roof panel dent with the roof corrugation end dented using measure back method Point of dent to be measured is approximately 19cm. from edge of panel. Place the gauge onto both top side rails and set the reference line. Measure the deepest point of the dent. Inspection Tools Home (http://www.containersurveytools.com) Inspection Tools Navigation (http://www.containersurveytools.com) + 603 31766040 (tel:60331766040) Contact Us (/contact/) /