i U.S. DEPARTMENT OF LABOR Occupational Safety and Health Administration DIRECTIVE NUMBER: CPL 02-02-080 EFFECTIVE DATE: 06/25/2020 SUBJECT: Inspection Procedures for the Respirable Crystalline Silica Standards ABSTRACT Purpose: This Instruction establishes inspection procedures and enforcement policies for the Respirable Crystalline Silica Standards, 29 CFR § 1910.1053 and 29 CFR § 1926.1153. Scope: This Instruction applies OSHA-wide. References: Federal Register, 81 FR at 16285-16890, 29 CFR §§ 1910, 1915, 1926, Occupational Exposure to Respirable Crystalline Silica; Final Rule, March 25, 2016. OSHA Instruction, CPL 02-00-164 Field Operations Manual (FOM), April 14, 2020. OSHA Instruction CPL 02-00-158, Inspection Procedures for the Respiratory Protection Standard, June 26, 2014. OSHA Instruction CPL 02-02-079, Inspection Procedures for the Hazard Communication Standard (HCS 2012), July 9, 2015. OSHA Instruction TED 01-00-015, OSHA Technical Manual (OTM)- Section II: Sampling, Measurement Methods and Instruments, Chapters 1- 3, February 11, 2014. OSHA Instruction ADM 04-00-003, OSHA Safety and Health Management System, May 6, 2020. Cancellations: None. State Impact: Notice of intent required. States are expected to have accessible enforcement policies and procedures in place which are at least as effective as those in this Instruction.